How to measure the duration

Hi all
I would like to know how to measure the duration for which the "over temperature" is in on state in the example "Temperature system Demo.vi"
i would also like to measure the transisent in a sine waveform.
thanks in advance.
with regards,
McFerra
Attachments:
Temperature System Demo.vi ‏49 KB

Hi McFerra,
Find the attach vi that can solve your question..
enjoy..
DoN't FoRgEt To cLiCk KuDoS.....!!!
Greeting from India,
Malhar
Attachments:
Temperature System Demo.vi ‏46 KB

Similar Messages

How to measure the pulse duration of a TTL signal using AI?

Hi there.
I would like to know how to measure the pulse duration of a TTL signal using an Analog input.
These TTL signals comes from an ultrasonic sensor's output. The pulse width of the signal is
proportional to the distance of the object the sensor detected.
I have tried using the example "Measure Pulse Width.vi" which uses a counter to measure the
pulse duration instead. It provides me with correct results.
However, i will like to know how can i do it using the AI instead.
I tried it by using the example "Acq&Graph Voltage-Int Clk.vi" which i modified by including a
timing and transistion measurement vi. Pulse duration was selected as the output. A graph indicator was also added at the output of the pulse duration to monitor the incoming TTL signals.
However, everytime the TTL signals was detected on the graph indicator, the numeric indicator always produce a "zero" reading.
I have attached my vi for your reference.
Can anybody advice me what i have done wrongly?
Regard.
Attachments:
Acq&Graph Voltage-Int Clkv1.vi ‏190 KB

Hi Paul,
Today i tried using 2 different methods to read the pulse duration of my sensor signal.
Both methods use "Acq&Graph Voltage-IntClk" vi as a guide.
Method1:
Add a filter vi(lowpass/bandpass) and a timing and transition measurements vi.
Pulse duration is selected as the output. With some numeric conversion, a centimeter
reading indicator was created. However, the reading always remains as "zero"
Method2:
Add a Mask and Limit Testing vi and a timing and transition measurements vi.
By adjusting my upper and lower limits, i manage to "filter" a single pulse out from the actual signal.
However, like the earlier case, the cm reading still remains at "zero"
I have attached both the methods resulted waveforms for your reference.
Are there anything that you can advice on?
Regard.
Attachments:
Results_Waveforms.doc ‏141 KB

How to measure the baseline of a noisy, pulsed signal

Hi
I am measuring the torque exerted by a large motor on a shaft using a load cell and lever arm. The shaft runs at approx 150 rpm. I have attached a drawing that shows the output I get. This is a test rig.
I have written some code that measures the maximum peak out of a group of approx 5 peaks and writes this to a shift register. This gives me an idea of the maximum torque "spike".
I also wish to measure the baseline torque (due to the bearings in the machine). Even when highly filtered (my noise filter is set to 49Hz) the signal exhibits this noise which is probably due to vibration in the system. The signal is zeroed when the motor is not running.
Does anyone have an ideas on how to measure the "baseline" torque? The large spike in torque prevents me from doing a running average. Can anyone think of a way of averaging just the noisy part of the signal to get an average value? I aim to to subtract the average baseline torque from the peak value to get an idea of the torque due to the event which causes
the spike.
Any help would be greatly appreciated.
Many thanks.
Attachments:
drawing of torque signal.gif ‏26 KB

Thanks for the reply. I understand what you are saying. However, I might have to modify my method for measuring the peaks if I choose to implement your idea. I have taken a screenshot of my "peak finder" code and attached it.
Bascially, the reset terminal is wired to a timer which outputs a pulse every few seconds. This resets the vi (a standard NI one I think) and sets the peak magnitude back to zero. This way, I am windowing the signal and measuring the maximum peak in every window. This is what I need to do.
So I could use a logical filter to feed data to the running average only if;
the amplitude of the signal is less than a certain threshold
and if the current value has similar low peaks either side of it
How would you construct the code to delay the evaluation so that the values in front and behind of the current data point can be analysed?
thanks again
Attachments:
peak_find_screenshot.jpg ‏45 KB

How to measure the performance of Extractor

Hi,
How to measure the time taken to by the extractor when executed from rsa3 for a given selection?
Lot of threads speak about ST05... but these transactions are too granular to analyse.
How to get the overall time taken.i need the overall time taken and the time taken by the individual SQL statements... please provide specific pointers.
Thanks,
Balaji

Maybe SE30 can help you....
Regards,
Fred

How to measure the performance of sql query?

Hi Experts,
How to measure the performance, efficiency and cpu cost of a sql query?
What are all the measures available for an sql query?
How to identify i am writing optimal query?
I am using Oracle 9i...
It ll be useful for me to write efficient query....
Thanks & Regards

psram wrote:
Hi Experts,
How to measure the performance, efficiency and cpu cost of a sql query?
What are all the measures available for an sql query?
How to identify i am writing optimal query?
I am using Oracle 9i... You might want to start with a feature of SQL*Plus: The AUTOTRACE (TRACEONLY) option which executes your statement, fetches all records (if there is something to fetch) and shows you some basic statistics information, which include the number of logical I/Os performed, number of sorts etc.
This gives you an indication of the effectiveness of your statement, so that can check how many logical I/Os (and physical reads) had to be performed.
Note however that there are more things to consider, as you've already mentioned: The CPU bit is not included in these statistics, and the work performed by SQL workareas (e.g. by hash joins) is also credited only very limited (number of sorts), but e.g. it doesn't cover any writes to temporary segments due to sort or hash operations spilling to disk etc.
You can use the following approach to get a deeper understanding of the operations performed by each row source:
alter session set statistics_level=all;
alter session set timed_statistics = true;
select /* findme */ ... <your query here>
SELECT
         SUBSTR(LPAD(' ',DEPTH - 1)||OPERATION||' '||OBJECT_NAME,1,40) OPERATION,
         OBJECT_NAME,
         CARDINALITY,
         LAST_OUTPUT_ROWS,
         LAST_CR_BUFFER_GETS,
         LAST_DISK_READS,
         LAST_DISK_WRITES,
FROM     V$SQL_PLAN_STATISTICS_ALL P,
         (SELECT *
          FROM   (SELECT   *
                  FROM     V$SQL
                  WHERE    SQL_TEXT LIKE '%findme%'
                           AND SQL_TEXT NOT LIKE '%V$SQL%'
                           AND PARSING_USER_ID = SYS_CONTEXT('USERENV','CURRENT_USERID')
                  ORDER BY LAST_LOAD_TIME DESC)
          WHERE ROWNUM < 2) S
WHERE    S.HASH_VALUE = P.HASH_VALUE
         AND S.CHILD_NUMBER = P.CHILD_NUMBER
ORDER BY ID
/Check the V$SQL_PLAN_STATISTICS_ALL view for more statistics available. In 10g there is a convenient function DBMS_XPLAN.DISPLAY_CURSOR which can show this information with a single call, but in 9i you need to do it yourself.
Note that "statistics_level=all" adds a significant overhead to the processing, so use with care and only when required:
http://jonathanlewis.wordpress.com/2007/11/25/gather_plan_statistics/
http://jonathanlewis.wordpress.com/2007/04/26/heisenberg/
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

How to measure the size of a table ?

Dear all,
May I know how to measure the size of a customized table. I have a list of customized table and I want to monitor the growth of the table size on daily basis.
Please advise how do I do it.
Your advice and input will be appreciated.
Thanks.
Regards,
Kent

Go to DB02 -> Detailed Analysis -> Enter the table name under "Object Name" -> Click history to see the changes in size by day.
Regards
Juan

How to measure the size of a string

windows app store how to measure the size of a string?
string str = "Hello word windows app store";

if you need the actual width the string occupies in pixels than use (see
this MSDN link for more details):
Graphics.MeasureString(String, Font)
if you only need the "length" of the string i.e. no. of characters than use (see
this MSDN link for more details):
str.Length
dont forget to bing / google :)
hope this helps!
Graphics.MeasureString(String, Font) can not use in windows store app.
TextBlock has Measure()
method, as following:
Size MeasureString(string content, Size availableSize, double fontSize, string fontFamily="Segoe UI")
    TextBlock tb = new TextBlock();
    tb.TextWrapping = TextWrapping.Wrap;
    tb.Text = content;
    tb.FontFamily = new Windows.UI.Xaml.Media.FontFamily(fontFamily);
    tb.FontSize = fontSize;
    tb.Measure(availableSize);
    return tb.DesiredSize;
Test:
string str = "Hello word windows app store";
Size size = MeasureString(str, new Size(800, 600), 40);

How to measure the InfoCube size?

can any body help me regarding this
how to measure the info cube size?

1. use transaction se16, infocube table /../f[infocube name] and /.../e[infocube name], count 'number of entries' - total records
use transaction db02 tablename infocubename - size in bytes
Re: how can we measure the info cube size
2. asap methodology
Re: Lifecycle Implementation
hope this helps.
regards
harikrishna N

How to measure the size of an object written by myself?

Hi all,
I'm going to measure the performance on throughput of an ad hoc wireless network that is set up for my project. I wrote a java class that represents a particular data. In order to calculate the throughput, I'm going to send this data objects from one node to another one in the network for a certain time. But I've got a problem with it- How to measure the size of an object that was written by myself in byte or bit in Java? Please help me with it. Thank you very much.

LindaL22 wrote:
wrote a java class that represents a particular data. In order to calculate the throughput, I'm going to send this data "a data" doesn't exist. So there's nothing to measure.
objects from one node to another one in the network for a certain time. But I've got a problem with it- How to measure the size of an object that was written by myself in byte or bit in Java? Not.

How to measure the task instance size

I am trying to understand how to measure the custom task instnace size that was occupied in the cache repository. Is there a way to obtain the size (in KB s ) in lighthouse 4.1 +sp5. Please help.

Hi, Luiz!
In order to estimate the instance size, you will have to sum up all the instance variables size.
From the practical prospective it may be difficult to use the algorithm in cases when your instance variables are not simple types.
For already existing instances, you can look the instance size in the database:
An instance is just a java object, that is serialized as a byte[] and stored in the engine database, PPROCINSTANCE table, column INSTDATA.
You can write a simple program (either java or SQL plus) that would read the instance from the BLOB and measure the size.
And yes, with large instances you can have performance problems.

How to change the duration of a sequence of stills all at once

Hi.
I know how to change the duration of one still, but changing the duration of many seems elusive. I've gone to the Help menu and typed "Duration." That points me to the menu where I would change the duration of one still.
Thanks for your help!
Roxane

edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post

How to change the duration of multiple paint strokes

Hello everyone! Newbie here.
I should've set the paint properties to first frame instead of constant. Where properties of multiple clone stamps are easily modified at once, the duration shows as a percentage and so I can't figure out how to reset the duration to the first frame of the clone stamps.
I should've read the paint chapter of the After Effects manual before I made a mess but I haven't found my answer there.
I'll also appreciate any suggestions for scratches and noise removal filters.
Thank your for your help!

edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post

Why i cannot know how much is the duration of the call WHILE calling someone?

Why i cannot know how much is the duration of the call WHILE calling someone?

You can. Look at the screen.

How to measure the number of ping over a interface

Hello
I need to setup a measurement of the number of ping that goes throug an ethernet interface over a duration of 3min
How can I do that ?
thanks for help

Hello
thanks for help
I have an application which sent pings to hundred of routers to test connectivity for pro-active monitoring purpose. there are some strange performance problem on this application and I want to measure the number of pings sent during a time interval

How to measure the time a pulse is high for?

I am using Pulse measure.vi to measure the output of a comparator. My comparator output feeds to an LED. The duty cycle is 50% so the LED just flashes on and off. I want to measure the time the output is high ('ON time') and I have been getting this by just multiplying the pulse width measure by the no. of pulses but I want to modify it to measure the 'ON time' of random signals with different duty cycles...
The aim is that I am taking in a signal and need the LED to turn on when the signal 'ON time' reaches a certain specified time.
But before I continue with the LED I am wondering how to add up the time the signal is high for?

Hi PinkLady4218,
You should be able to use one of the shipping examples to do what you need, please open LabVIEW and go to Help >> Find Examples.
From the Example Finder please go to Hardware Input and Output >> DAQmx >> Counter Measurements >> Period or Pulse Width >> Meas Buffered Semi-Period-Continuous.vi
You will then need to deinterleave the output array as it will show high time then low time then high time then ...
You will need to confirm the order these values appear and then you can use a function from the arrays palette and use the function "Decimate 1D Array"
Regards
JamesC
NIUK and Ireland
It only takes a second to rate an answer

How to measure the duration

Similar Messages

Maybe you are looking for