How to measure the payload size handled by XI ?

Hi !
I need to find out the memory space occupied by XI payload from sender system to target system per month.. How can i find it ?
Thanks,
Laawanya

Hi,
For a particular message, you can go to SXMB_MONI -> Runtime and you can see the payload size for that particular message. For a month message, you can look into Performance monitoring for all information. I didn't know it shows the size, because in my XI system its taking long time. So you cud check there.
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

How to know the payload size of message

hi can anybody tell me how to know the payload size of message?
Message was edited by:
vvr murty

Hi,
To know the size of the input message , i hope we have one option , after copying the test payload from the SXMB_MONI into Message mapping test -- click on test
after come back to design tab in message mappign
click on left side root node and Press CTRL+SHIFT + mouse right click and click on trace -- you can see the size of the message payload.
In SXMB_MONI..
see the payload messges
also see the below link
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards
Chilla

How to measure the InfoCube size?

can any body help me regarding this
how to measure the info cube size?

1. use transaction se16, infocube table /../f[infocube name] and /.../e[infocube name], count 'number of entries' - total records
use transaction db02 tablename infocubename - size in bytes
Re: how can we measure the info cube size
2. asap methodology
Re: Lifecycle Implementation
hope this helps.
regards
harikrishna N

How to measure the size of a table ?

Dear all,
May I know how to measure the size of a customized table. I have a list of customized table and I want to monitor the growth of the table size on daily basis.
Please advise how do I do it.
Your advice and input will be appreciated.
Thanks.
Regards,
Kent

Go to DB02 -> Detailed Analysis -> Enter the table name under "Object Name" -> Click history to see the changes in size by day.
Regards
Juan

How to measure the size of a string

windows app store how to measure the size of a string?
string str = "Hello word windows app store";

if you need the actual width the string occupies in pixels than use (see
this MSDN link for more details):
Graphics.MeasureString(String, Font)
if you only need the "length" of the string i.e. no. of characters than use (see
this MSDN link for more details):
str.Length
dont forget to bing / google :)
hope this helps!
Graphics.MeasureString(String, Font) can not use in windows store app.
TextBlock has Measure()
method, as following:
Size MeasureString(string content, Size availableSize, double fontSize, string fontFamily="Segoe UI")
    TextBlock tb = new TextBlock();
    tb.TextWrapping = TextWrapping.Wrap;
    tb.Text = content;
    tb.FontFamily = new Windows.UI.Xaml.Media.FontFamily(fontFamily);
    tb.FontSize = fontSize;
    tb.Measure(availableSize);
    return tb.DesiredSize;
Test:
string str = "Hello word windows app store";
Size size = MeasureString(str, new Size(800, 600), 40);

How to measure the size of an object written by myself?

Hi all,
I'm going to measure the performance on throughput of an ad hoc wireless network that is set up for my project. I wrote a java class that represents a particular data. In order to calculate the throughput, I'm going to send this data objects from one node to another one in the network for a certain time. But I've got a problem with it- How to measure the size of an object that was written by myself in byte or bit in Java? Please help me with it. Thank you very much.

LindaL22 wrote:
wrote a java class that represents a particular data. In order to calculate the throughput, I'm going to send this data "a data" doesn't exist. So there's nothing to measure.
objects from one node to another one in the network for a certain time. But I've got a problem with it- How to measure the size of an object that was written by myself in byte or bit in Java? Not.

How to measure the task instance size

I am trying to understand how to measure the custom task instnace size that was occupied in the cache repository. Is there a way to obtain the size (in KB s ) in lighthouse 4.1 +sp5. Please help.

Hi, Luiz!
In order to estimate the instance size, you will have to sum up all the instance variables size.
From the practical prospective it may be difficult to use the algorithm in cases when your instance variables are not simple types.
For already existing instances, you can look the instance size in the database:
An instance is just a java object, that is serialized as a byte[] and stored in the engine database, PPROCINSTANCE table, column INSTDATA.
You can write a simple program (either java or SQL plus) that would read the instance from the BLOB and measure the size.
And yes, with large instances you can have performance problems.

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

How to set the Heap size for JAVA

I am facing the memory out of space problem:
Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space
Could anyone suggest me a solution to solve the problem ?
increase the heap size ?
anyway to increase the heap size in the program by default without additional setup?
Thank you.

How to determine the program must handled with increase heap size ?
could I know any method to know whether the program is memory leaking or need large memory heap size?

How to increase the database size

Hi All ,
Our Client is going to increase their customers from 3.5 million to 5 millions
(12 millions in future ) and there is no increase in the existing licenses..
At present we have very less space in Data base server. We are Going Live at the End of the Month.
How to increase the database size to meet the Client requirements.
we have to increase the No of Processerors etc...
Below are the details of Servers:
System Model: IBM,7040-681
Machine Serial Number: 830D5BF
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1904 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 4 bgl-svr-biap
Memory Size: 4096 MB
Good Memory Size: 4096 MB
Note : Server is IBM P690.
1) System Lansdcape --> Two System Landsacpe ( Dev to Prod )
2) BW Version --> 3.5
3) SAP Basis --- > 6.4
4) No of Application servers currently having --> Only One Server
Can any body suggest me how to solve this.....
Thanks in Advance..
Kasi Chukka

Hi Kasi,
Your question is not very clear, from the looks of it, the load on your client's system will be doubling soon.
You need to look at the system stats on how the system is handling the current load, use transactions ST06, ST04 and ST02 to check if the DB hit ratios are as expected, the cpu idle time, the busy periods. Identify if there is large amounts of paging on the server(candidate for increase in real memory).
On AIX level, you will need to look at CPU / Memory usage.
On SAP Application server, you need to look at SAP Buffers.
On Oracle end, look at SGA stats, if it need to increase, the data growth that is current and estimated growth (DB02).
You will not get an exact answer to it, you will need to analyze the existing load and then estimate (guess). The hardware upgrade will also depend on what the client is willing to spend, its always a good practise to add 20% to what you have estimated as these figures are never accurate.
All the best.
Cheers,
Nisch

How to measure the baseline of a noisy, pulsed signal

Hi
I am measuring the torque exerted by a large motor on a shaft using a load cell and lever arm. The shaft runs at approx 150 rpm. I have attached a drawing that shows the output I get. This is a test rig.
I have written some code that measures the maximum peak out of a group of approx 5 peaks and writes this to a shift register. This gives me an idea of the maximum torque "spike".
I also wish to measure the baseline torque (due to the bearings in the machine). Even when highly filtered (my noise filter is set to 49Hz) the signal exhibits this noise which is probably due to vibration in the system. The signal is zeroed when the motor is not running.
Does anyone have an ideas on how to measure the "baseline" torque? The large spike in torque prevents me from doing a running average. Can anyone think of a way of averaging just the noisy part of the signal to get an average value? I aim to to subtract the average baseline torque from the peak value to get an idea of the torque due to the event which causes
the spike.
Any help would be greatly appreciated.
Many thanks.
Attachments:
drawing of torque signal.gif ‏26 KB

Thanks for the reply. I understand what you are saying. However, I might have to modify my method for measuring the peaks if I choose to implement your idea. I have taken a screenshot of my "peak finder" code and attached it.
Bascially, the reset terminal is wired to a timer which outputs a pulse every few seconds. This resets the vi (a standard NI one I think) and sets the peak magnitude back to zero. This way, I am windowing the signal and measuring the maximum peak in every window. This is what I need to do.
So I could use a logical filter to feed data to the running average only if;
the amplitude of the signal is less than a certain threshold
and if the current value has similar low peaks either side of it
How would you construct the code to delay the evaluation so that the values in front and behind of the current data point can be analysed?
thanks again
Attachments:
peak_find_screenshot.jpg ‏45 KB

How to measure the performance of Extractor

Hi,
How to measure the time taken to by the extractor when executed from rsa3 for a given selection?
Lot of threads speak about ST05... but these transactions are too granular to analyse.
How to get the overall time taken.i need the overall time taken and the time taken by the individual SQL statements... please provide specific pointers.
Thanks,
Balaji

Maybe SE30 can help you....
Regards,
Fred

How to measure the performance of sql query?

Hi Experts,
How to measure the performance, efficiency and cpu cost of a sql query?
What are all the measures available for an sql query?
How to identify i am writing optimal query?
I am using Oracle 9i...
It ll be useful for me to write efficient query....
Thanks & Regards

psram wrote:
Hi Experts,
How to measure the performance, efficiency and cpu cost of a sql query?
What are all the measures available for an sql query?
How to identify i am writing optimal query?
I am using Oracle 9i... You might want to start with a feature of SQL*Plus: The AUTOTRACE (TRACEONLY) option which executes your statement, fetches all records (if there is something to fetch) and shows you some basic statistics information, which include the number of logical I/Os performed, number of sorts etc.
This gives you an indication of the effectiveness of your statement, so that can check how many logical I/Os (and physical reads) had to be performed.
Note however that there are more things to consider, as you've already mentioned: The CPU bit is not included in these statistics, and the work performed by SQL workareas (e.g. by hash joins) is also credited only very limited (number of sorts), but e.g. it doesn't cover any writes to temporary segments due to sort or hash operations spilling to disk etc.
You can use the following approach to get a deeper understanding of the operations performed by each row source:
alter session set statistics_level=all;
alter session set timed_statistics = true;
select /* findme */ ... <your query here>
SELECT
         SUBSTR(LPAD(' ',DEPTH - 1)||OPERATION||' '||OBJECT_NAME,1,40) OPERATION,
         OBJECT_NAME,
         CARDINALITY,
         LAST_OUTPUT_ROWS,
         LAST_CR_BUFFER_GETS,
         LAST_DISK_READS,
         LAST_DISK_WRITES,
FROM     V$SQL_PLAN_STATISTICS_ALL P,
         (SELECT *
          FROM   (SELECT   *
                  FROM     V$SQL
                  WHERE    SQL_TEXT LIKE '%findme%'
                           AND SQL_TEXT NOT LIKE '%V$SQL%'
                           AND PARSING_USER_ID = SYS_CONTEXT('USERENV','CURRENT_USERID')
                  ORDER BY LAST_LOAD_TIME DESC)
          WHERE ROWNUM < 2) S
WHERE    S.HASH_VALUE = P.HASH_VALUE
         AND S.CHILD_NUMBER = P.CHILD_NUMBER
ORDER BY ID
/Check the V$SQL_PLAN_STATISTICS_ALL view for more statistics available. In 10g there is a convenient function DBMS_XPLAN.DISPLAY_CURSOR which can show this information with a single call, but in 9i you need to do it yourself.
Note that "statistics_level=all" adds a significant overhead to the processing, so use with care and only when required:
http://jonathanlewis.wordpress.com/2007/11/25/gather_plan_statistics/
http://jonathanlewis.wordpress.com/2007/04/26/heisenberg/
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to measure the payload size handled by XI ?

Similar Messages

Maybe you are looking for