How to merge my disk partition with the free space

Hello! I have a macbook pro mid 2010 with Mavericks, I had 2 partitions and deleted one with the disk utility.
Now I want to expand the one that I have left but I can't, I cannot drag the corner of the partition because it is below of the free space.
I will post a picture so you can understand better.  Also I tried using iPartitions but it won't let me make any changes. Thank you
I don't know if anyone can see the picture so i'm leaving a url:  https://imagizer.imageshack.us/v2/505x387q90/745/WaiZID.png

You need to create a partition in the free space, clone the content of Macintosh HD 2 to it, restart from the newly-created partition, and delete the one currently listed as Macintosh HD 2.
(114068)

Similar Messages

  • How to merge PDF/Word Doc with the Form I created?

    Hi All,
    Which software should I use to merger PDF/Word Doc with the form I created.
    One more question is I want the form page to show up right next to the ending or in the middle of the word doc . How to manange the placement of the sections?
    Please do let me know, its urgent.
    Thanks and Regards,
    Hari.

    1) The option of creating the whole thing as a LiveCycle form means that you need to convert the Word document using LiveCycle Designer. The import utility won't preserve the fidelity of the Word document the way printing to the PDF print driver does. It will likely require a fair bit of tweaking in Designer to get it looking like you want. You will likely get frustrated, since Designer is not a word processor.
    2) You can create PDF forms in Acrobat without launching LiveCycle Designer. While they look the same to a user as forms created with LiveCycle Designer, behind the scenes they are very different. When you create a form in Acrobat you overlay fields on top of an existing PDF document that you had previously created using the PDF print driver. There is an extensive scripting model for these "Acroforms". The technology pre-dates LiveCycle yet Adobe continues to improve the two forms models in parallel. In Acrobat, open a PDF and select tools-->forms-->show forms toolbar.
    3) I recommend this option if it's feasible. I don't know what you mean by "doesn't show up in a flow". If you're going to use the form in Acrobat 7, then save it as Acrobat 7 compatible in LiveCycle Designer. This is one of the options in the Save As dialog of LiveCycle Designer.
    Jared Langdon
    http://www.jlangdon.ca

  • How to create a partition using the free space of an existing[SOLVED]

    Hi Guys,
    Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
    Thanks.
    Please see this post:
    https://bbs.archlinux.org/viewtopic.php?id=109402
    Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

    Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
    Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
    Older computer:
    2 GB ntfs - MicroXP
    8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
    20 GB ntfs - games partition
    Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
    New computer:
    20 GB Windows 7
    10 GB Arch Linux + home dir
    50 GB games partition
    Rest of the space is ext4 mounted to /media
    Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
    Last edited by DSpider (2010-12-03 13:02:26)

  • How to merge iPhone mail folders with the server folders

    HI,
    I wish to merge my Drafts folder on Hotmail with the folder on the iPhone. So I could prevent duplicated folders.
    Here a picture for demonstration.
    Thanks for helping

    If I understand you, you want to merge the local iPhone Drafts folder with the Hotmail Drafts folder.  This can't be done - IMAP accounts like Hotmail mirror the server folder settings.  You have a choice which Drafts folder you want to use on the phone :
    Settings > Mail.... > your account > Advanced > Mailbox behaviors > Drafts mailbox > choose between the only on your iPhone and in Hotmail
    Yes you do.
    But I don't have Mailbox behaviors - I have that:

  • Help on how to make an infinite loop with the same space on all images

    HI:
    I made a movie clip with infinite  loop in which there are images that move from right to left something simple like a marquee, and each image has a blank space between  them, but between last and first image there is a more space, how I can do to  make all images have an equal space between each one and that the motion never stops.

    Thanks for your time and answers my friend, but I'm still not be able to achieve what I want, I forgot to tell that I'm doing this by layers, let's say, I have 5 images, (in fact I have like 50 images converted to movie clip symbols) each image has it's own layer, layer 1, layer 2, layer 3, layer 4, layer 5, then I put a 200 frame motion tween on all layers at 30 fps, then I arranged layer 1 on the first frame to the frame 200, the second layer from frame 50 to frame 250, third layer from frame 100 to frame 300, fourth layer from frame 150 to frame 350, and fifth layer from frame 200 to frame 400, by this I mean I put a 50 frame of space on each image but if you can see, the last image has a duration from frame 200 to frame 400, and there's nothing on frame 250 where it is supposed to be another image to match the same blank space of all the others, the movie clip restarts on the frame 400, and there's a 150 frames of blank space between the last image and the first image, I put the gotoandplay on the frame 250, but it abruptly restarts the movie.
    Is there another way to do this ?
    Am I doing something wrong ?
    Please I really really need help on this.
    Thanks

  • How to merge two adjacent partitions?

    How to merge two adjacent partitions?

    The formal steps are delete the second partition and right click on first one, choose "extend".
    Of course this will erase data on second partition.
    Some third party tools can help do the job with keep data on second partition. 
    If you have any feedback on our support, please send to [email protected]

  • Disk partitions with same drive letters in Win 2k3

    Hi 
    We are hosted a 2003 standard server in Vmware.Recently we did an extend in the hard disk partition.We are using the storage as San.After extending the partition it got extended successfully.But when we open disk management it was showing as two partitions
    with the same letter.In my computer only showing one drive.Please suggest how this happened and what it actually meant.We are using dynamic disk.
    Partition Size in My computer : 1.4 TB as one single drive
    Disk Management : 1.2 TB  & 200 GB ( Same drive letters with two drives)
    We have recently extended the disk to 1.2 TB to 1.4 TB.
    Thanks
    Roo

    Actually, this is normal for dynamic disks.
    Dynamic disks, unlike basic, disks may have many (dynamic) partitions.
    From the picture you posted it shows that:
    Volume D: (1228.79GB) = Partition1 (1024.00GB) + Partition2(204.79GB).
    For some reason, system was unable to extend Partition1, so it added Partition2 to the volume. This is perfectly normal.
    You may read more about basic and dynamic disks at Technet library.
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa363785(v=vs.85).aspx

  • Disk partition issue.Cant allocate the free space for windows.ls help.

    I have created a partition for OS X (200GB journaled, encrypted) and also left 51GB unallocated for Boot Camp later on.
    After I successfully installed OS X 10.9, I wanted to install Windows 8.1 with Boot Camp. But Boot Camp only wants to shrink the Macintosh HD partition, and doesn't want to use the free space left on the drive. So I switched to Disk Utility, to try it that way. But in Disk Utility I wasn't able to create a new partition (if I press the 'partition' button it just doesn't do anything).
    Next, I tried to switch of File Vault 2, let it decrypt itself, restart, and then try it again in internet recovery mode. But still, I cannot expand the Macintosh HD-partition or create a new partition.
    Disk Utility log:
    2014-09-04 00:42:31 +0200: Preparing partitioning: 'APPLE SSD SM256E Media'
    Also, Disk Utility tells me there is 200.000.000.000 bytes of 200.000.000.000 bytes used, and 0 bytes of free space. Even though not even half of the drive is colored blue (which displays the amount of data on the drive). Finder tells me only 88GB is used.
    I used the new installation for no longer than half a day, so there can't be issues that data is spread over the whole volume. Disk Utility can't find any problems, and tells me the disk and all of her volumes are okay (in green texts).
    I also tried to start from a windows-install-usb, and tried to make a partition of the 'unallocated space', but then Windows tells me that it fails because the volume is part of the 'GPT partition style'.
    What do I have to do to repartition my volumes!?
    I'm using a MacBook Pro Retina 15" (MacBook Pro 10,1) with a 256GB SSD (251GB according to OS X).

    As you're finding, a limitation of basic disk is that it only allows 4 primary partitions or 3 primary partitions and an extended partition.
    http://technet.microsoft.com/en-us/library/dd163549.aspx
    For information on converting basic to dynamic as well as considerations prior to doing so, consult this article.  It should help you make a decision whether or not you want to convert the disk:
    http://technet.microsoft.com/en-us/library/dd163552.aspx
    If you decide to convert, get a backup so that no matter what you're covered. Not that it's risky, but better safe than sorry.

  • I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • Hi, I lost my computer. How can I sincronize my iphone with the new computer without loose my contacts and apps?

    Hi,
    I lost my computer.
    How can I sincronize me Iphone with the new computer without loose my contacts and apps?
    Thanks
    Thaschor

    It has always been very basic to always maintain a backup copy of your computer.
    Use your backup copy to move everything to the new computer.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from the iphone:  File>Transfer Purchases
    If you enter one unique contact and calendar entry on your computer, then when you first sync you should get the option to merge the data.

  • My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

    My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

    That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
    Thank you for your replys

  • When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

    When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

    Hello Daijalove97,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    To use your Apple ID at the iTunes Store
    Open the latest version of iTunes.
    Choose Store > Sign In from the Store menu.
    Enter your Apple ID and password, then click Sign In.
    Click Review when asked to review your information.
    Enter your billing information, a credit card will be required.
    Click Continue when you're done entering your credit card and billing information.
    Best of luck,
    Mario

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • HT1386 When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    There is no Info tab in Mavericks
    if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • How do you manually manage podcasts with the new iTunes?

    Like the subject line says: How do you manually manage podcasts with the new iTunes?
    With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
    This question probably has a simple answer, and I'm just not seeing it.

    Rock,
    I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
    Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
    1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
    2. Mouse to the podcast you want to place on your Ipod.
    3. Right-click it.  A long menu will pop up.
    4. Move to the "Add to Playlist" option.  As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally).  Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
    A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
    Hope this helps - let me know if it works for you!

Maybe you are looking for