How to merge two seperate free space into single partition/volume???

Hey guys :)
Please help me on merging two unallocated free spaces in my internal harddisk. I already tried searching for options in diskmanagement but nothing found to do that. The harddisk has two free spaces(1gb and 50.78gb) now, I want to merge them into single one
and finally as a single parition/volume. Is there any other method or should use any other third party tool?
I really wanted to attach a screenshot but sadly microsoft couldn't allow me.

JAJ
You need a third party tool like Easeus Partition Manager
Wanikiya and Dyami--Team Zigzag
Sure I'll try that. Thank you very much :)
But it is really sad to say that it is real drawback of windows as it doesn't have its own choice in diskmanagement utility.

Similar Messages

Merge Free Space into Primary Partition

Hello, all, is it possible to merge free space into the primary partition? I made a partition but deleted it and i'm left with free space and i cannot delete it. I'm using disk utility and i wouldn't want to erase the whole drive and start over just to erase the free space

There is an option.
I don't know if it's the best but it works for me.
Boot from a recovery disk/usb and open Disk Utility then:
1. Create a partition from the free space
2. Select the drive
3. Go to Restore tab
4. On the source drag the partition with your OS
5. On the Destination drag the partition you created
6. Click Restore
7. Go back to Partition tab and erase the OS partition (not the partition you created)
8. Resize the partition you create
Done.
I know this is an old topic but maybe someone is stuck with this problem and can't find an answer!

How do I merge two seperate HD's into one. I upgraded my MBP to an SSD and installed a hybrid in the optical bay.

I intially planned to use my cloned system on the SSD and the Hybrid to be used as backup, media, whatever else. But I only had access to certain program on another MBP and so I cloned it to a partition on the Hybrid. So basically I have two seperate computers each isolated from one another. I have two startup disks, 2 seperate everything. And I have to be careful when syncing my dropbox and a myriad of issues when swithing from one to the other. So does anyone have any questions about this or any suggestions as to how I can merge the 2 so that I can run the initial configuration I desired. Oh and the performance between the Momentus XT hybrid and the Intel-520 ssd are getting closer and closer as time goes by that I almost don't notice a difference, grnted my MBP is only backward compatible to 3gbs so I don't get the performance of the 6gbps capabilities of the intel. But GD its awesome.
I really would appreciate any suggestions. the machine is 15" MBP mid 2010 with 10.8.2.

I don't know that copying them from an external would be any different than doing it internally because they are physically seperated. I have tried many different configurations. It won't let me erase or format the SSD so that I can clone the Hybrid to it. Which is what I prefer to do but I haven't boot from the recovery or an external and tried doing it that way. But even then I have to boot from each seperately, what is holding me up is I've lost both product keys to office and adobe ms 6 due to the fact of not only having them so long and always upgrade using dmg's as well as upgrading os's so often. So those programs are only available on one computer. Which happens to be on a seperate internal disk. A slick unix script would be nice. I am just really tired of trial and error and would like to get back to using my stuff.

How to merge two separate Muse files into one file?

Have 220 pages built for a website, client wants to add another 180 pages. The Muse file is already slow to load and cumbersome to work with at 220 pages, it's going to be much worse at 400 pages. Is there a way to create two separate Muse files and then merge them prior to publish (or at publish, or post-publish). The only other solution I have is to build the second batch of pages in a separate file, then copy them into the main file one by one. Is there a batch copy/paste? Is there a merge?

Hello,
It's not possible to merge muse files as such. The pages have to either be created in the same file or they must be copied over individually later on from the other file to this file.
Cheers
Parikshit

How to edit two starttime & end time into single start time and end time

my application is to reserve a resource for particular period of time
(min 1hr) so i store time into database as numerice value
i need to edit the reserved time
my problem is
(for eg)
a user reserve as 6.00 to 9.00
the same user reserve as 15.00 to 18.00 on the same day
if the user need to edit the time as 8.00 to 16.00 then i need to check the database and update it to 8.00 to 16.00 and those two reservation should not be present in the database
i dont know how to solve this problem
kindly help me in this regard
thank u in advance

How are you storing the two times?
If u r storing as two different records u need to delete them and add a new one
Other approach is to store the time as comma separated values like
6.00-9.00, 15.00-18.00. when u want to change them just update it with the latest value.

How to link two XL Reporter templates into single sheet

Hi
I'm Using SAP Business One 2005B, PL 04.
I want to link one template into another XL Reporter Template. Kindly guide me, how to link.
Thanking You

How to create a to new template with these two templates, linking it to a base table.
I have taken delivery document based on Item delivered. I have grouped it by item Group. I want to link the Instock based on warehouse for those Items. If i try it in a single template i cant get the value for either one of them. How to get these data.

Re: How to merge two video files in a single file.

If you want to get just sequence of two files, so you can use http://java.sun.com/products/java-media/jmf/2.1.1/solutions/Concat.html I suppose.
Or some for merging on http://java.sun.com/products/java-media/jmf/2.1.1/solutions/

Hi watergad,
ThX good help!
NeuralC

How to merge two movies documents into 1 in iTunes?

Can anyone tell me how to merge two movies documents into one in iTunes? Sorry maybe this is an easy and dumb question for you, but I have totally no idea. I download some movies in Windows and use Kigo Video Coverter to converte them into mp4 format. So I can watch it through new Apple TV in my big screen TV. Now I am thinking maybe I can upgrade my experience a bit more. Because some movies are downloaded into 2 or 3 separated document and I have to choose and click them while seeing. Is there any software can merge those separated documents into one single in mp4 format? I wish you could give me several to choose . Freeware is better. Thanks in advance.

Thanks. I've tried simplemovies application but it seems too much complicated for me. I read some passages online and bought Quicktime Pro ($30) and finally link 2 mp4 documents together. So easy. Only issue is I have to pay $ 30 .

Merging two separate MUSE sites into a single MENU system and Paid & online BC eCommerce site

Hi all! I am stuck trying to figure out a Process Conundrum:
1> I have a BC site with e-commerce ready to go - paid - online with store template in place.
2> I also Have a 2nd MUSE created web site (with the client content/pages) that needs to merge with that E-commerce BC site.
What is the move to merge the two separate sites into a single site with the Menus all in proper order?
Is this simple and I can not see it? (merge the two sites in a folder and reopen in muse for new menus?
Or do i need Dreamweaver to assist in the merge?
In other words:
What is the PATH/PROCESS to merge a 2nd MUSE designed web site (sans e-commerce), in order to tie into the online BC e-commerce template paid site - so the menus update together as "one" site?
Menu Update Concern: merging two separate MUSE sites into a single MENU system with the "Paid on line Active BC e-commerce Template". How do it do it Process wise so that the menus adjust automatically... so they are "one" menu.
Reminds me of an old joke: Q: "What did the Buddhist say to the hot dog vendor at the ball park?"
A: "Make me one with everything!"
ONWARD>>>>>
Possible paths I am about to take attempting to Solve the problem - and scale the learning curve...
download the BC e-commerce site into Dreamweaver -
export the 2nd muse site by publishing it to a unique folder.
combine them by going back into dream weaver and attempting to figure out linking the menus. - perhaps they are automatic there too.
or load them both up to BC and back down to MUSE to fix the menus?
I appreciate Any recommendations, hits or humor that you could help on this.
Cheers!

Thanks, Liam... I will get it eventually...
Sadly: I do not have a budget to hire this out...
   - I have gone through lots of the BC and Muse training exercises. Adobe
   and BC Gurus.
But... if the only problem is that I need to work though my partner site BC
interface...
   - that would be fine...
   - so would using dream weaver....
I will go back and review the BC interface and also dreamweaver
capabilities.
without a budget... i need to figure it out... please do point to any
material or training you might be able to point me to.
I don't have to use muse, if that is my sticking point. I just need to get
the project up and BC looks perfect.
Thanks.

How to merge two XML's with JDOM?

How to merge two xmls's using jdom? like:
is there a way to add the complete content one xml into the parent node of another xml?
//in.xml
<?xml version="1.0"?>
<people>
<person>
<name>ABC</name>
<email>[email protected]</email>
</person>
</people>
//out.xml
<?xml version="1.0"?>
<address>
<city> abccounty</city>
<state> abcstate</state>
</address>
Merged XML:
<?xml version="1.0"?>
<people>
<person>
<name>xyz</name>
<email>[email protected]</email>
</person>
<address>
<city> abccounty</city>
<state> abcstate</state>
</address>
</people>
import java.util.List;
import org.jdom.Document;
import org.jdom.Element;
import org.jdom.input.SAXBuilder;
import org.jdom.output.Format;
import org.jdom.output.XMLOutputter;
public class MergeXMLS {
     public static void main(String[] args) {
          try{
              SAXBuilder builder = new SAXBuilder();
              Document books = builder.build("D:/in.xml");
              Document onebook = builder.build("D:/out.xml");
              Element root = books.getRootElement();
              List rows = root.getChildren();
              for (int i = 0; i < rows.size(); i++) {
                  Element row = (Element) rows.get(i);
                  onebook.getRootElement().addContent(row.detach());
                  System.out.println(row.getName());
              new XMLOutputter(Format.getPrettyFormat()).output(onebook, System.out);
          }catch(Exception e){
               e.printStackTrace();
}

The above code only add's the first node.
I changed the code little differently to
              SAXBuilder builder = new SAXBuilder();
              Document books = builder.build("D:/in.xml");
              Document onebook = builder.build("D:/out.xml");
             //trying to add second xml into the first
              books.getRootElement().addContent(onebook.getRootElement().getContent());
              new XMLOutputter(Format.getPrettyFormat()).output(books, System.out);
here is the exception from the above code:
org.jdom.IllegalAddException: The Content already has an existing parent "address"
     at org.jdom.ContentList.add(ContentList.java:218)
     at org.jdom.ContentList.add(ContentList.java:140)

Is there a way to merge two separate iTunes accounts into one?

Is there a way to merge two separate iTunes accounts into one? I don't want to "share libraries." I just want one account that once stemmed from two seperate accounts and has all of the purchases and history. Thanks for any help!

No.

How to merge two conflicting contact on iPhone and on laptop?

How to merge two conflicting contacts?
When syncing my iPhone w/ my Mac laptop, it seems that Apple does not provide an option that allows you to merge the data from two conflicting contacts. For example, you have a contact on your iPhone for Andy Summer and a contact on your laptop for Andy Summers - one contact contains only Andy's name and email address, the other contact contains only Andy's name and his mailing address. I'd like to be able to merge the data from these two contacts into one and save it to both, but the Conflict Resolver in the syncing program (I think it's in iTunes) does not offer an option for merging the two.
Does anyone have any knowledge about 1) how to merge data from two conflicting contacts, or 2) some other way to keep the data from each so that I don't have to choose one over the other?

Jawad,
First of all,You need to make teaming on both the interfaces on the server side.Which mode do you want to use? Active-Active or Active-Standby.
Server side :Active-Active - You need to configure the switch side to be a etherchannel/LACP. It can be done by the commands on the cisco 4006.
Server side :Active-Standby - You need nothing to do at the switch side.
Note: Seems PAGP is a proprietary of cisco. Server shouldn't know that. To be bound with mode "on" of "lacp" should be fine. It depends on the server side as well.
HTH
Thot

How to merge two WD components in one WD application?

Hi SDN,
Can any one tell me How to merge two WD components in one WD application?
suppose i have two WD componets z_comp1 & z_comp2 now i want to use both these components in one WD application.
Regards,
Rahul.

hi rahul...........
          you can use any number of wd components into one component.
eg:
        consider you are having 2 components 'A' and component 'B' and you want to embed both into component 'C'.
       You can just click the 'Create' icon which will be present in the properties tab of the component controller.
       you mention the name of bothe components 'A' and 'B'.
        So now the interface controller of both the components are created in component 'C'.
       Now you can use the views present in both the components in component'C'.
--regards,
alex b justin

Merge two Livecycle PDF files into one PDF?

I have a new requirement where I need to take two different PDF forms I'm producing from LiveCycle and merge them together into a single PDF.
I have heard that Adobe Acrobat cannot edit LiveCycle files, does anyone know if it is possible to merge two Livecycle PDFs together into a single file?

Hello Clay,
This is not available in the standard SAP Interactive Forms by Adobe solution.
What I can recommend is:
Step 1: retrive the data back from the PDF files using the getData functionality of the ADS.
Step 2: Render a new PDF file. The template of this new PDF should contain the template of both original PDF files.
This should work if both of the original PDF files were created by the SAP Systems ADS.
Best regards,
Dezso

How to merge two repositories using(MUD)

hi all,
how to merge two repositories using mude, for example i have sh rpd and paint rpd how to merge two repositories using Multi user development(mud), please don't give venkat forums link and oracle's training doc links.
Is this possible? if it is possible please help me .
Thanks
Naresh

Hi Naresh,
What you could do is:
1. do a ontime command line merge of both repository using the nqudmlexec tool
2. In the mergerd repository created two project (sh and paint) and assign one bussiness model to each project.
3. Make this the master repository for your MUD.
4. Check the projects in and out.
regards
John
http://obiee101.blogspot.com

How to merge two seperate free space into single partition/volume???

Similar Messages

Maybe you are looking for