How to Migrate 9i to 10g??

Ho to migrate a database which is runnning on oracle 9i to 10g? and will it support all the commands and concepts
which 9i support.I mean if i run things on 10g as like 9i
will i able to achive all these???
with regards : Alok Kumar

Hi
be aware the most thinks will work.
But if you use JDBC you replace at leat the jdbc thin driver and some parts of code ...
kr,
Rainer

Similar Messages

How to Migrate Oracle Forms 10g 9.0.4 to 10.1.2

Hi I would like to find information on what is necessary to do in order to migrate Forms 10g 9.0.4 to 10.1.2.
Do I need to use Oracle Migration assistant ?
Is it enough only compile forms ?
Where I find documentation on how to execute this migration. I am only find documentatio to migrate from 6i to 10g, but I need documentation to migrate from Forms 10g 9.0.4 to 10.1.2.

Hi,
Thank you for the answer about Oracle forms.
Now I would like ask another question but this time for Oracle Application Server. As we have Oracle forms 10g 9.0.4 we also use the Application Server with this same version.
Do you have any recommendations on how to Migrate the Oracle Application Server from 10g 9.0.4 to 10.1.2 ?
Thank you .

How to Migrate Oracle Portal 10g on Linux to Oracle Webcenter Portal 11g (11.1.1.6)

Hello friends,
I am a new on this topic. I want to migrate Oracle portal pages on 10g to Oracle webcenter portal 11g (platform is also different linux to windows)
Action i have already taken--- On new box i have installed Oracle webcenter 11g (Weblogic+Oracle Forms +Oracle Reports). Oracle Forms and Oracle Reports are also customer requirement. Thease stuffs are working fine.
Need to be done-- I need to migrate production portal pages to 11g new environment for testing
Please give me the suggestion, how to procced on this.
Regards,
Vivek

Hello Vinay,
Thanks for the update. Actually my scenario is ---
1) Oracle Portal 10.1.2 is running in prod. (Prod is linux environment and new environment is windows)
2) Customer requirement is they want to run this oracle portal on Portal 11g (Webcenter)
3) Database migration is not required, they will connect to prod database from new new Oracle 11g Portal.
4) They want only migrate the Oracle 10g portal pages to Oracle 11g Portal
As i am new on that, so please suggest me solution, how to do this. How i can put oracle 10g pages to Oracle 11g Portal (As tnsentry will work to connect prod database)
Please suggest me solution step be step if you have.
Thanks in advance
Regards,
Vivek

How to migrate RAC/ASM 10g to a new SAN on Unix

Hi everybody,
I have an Oracle RAC 10g using ASM on Solaris Sparc 10.
And I need to change my SAN storage for a better.
Somebody can tell me the steps to follow or a Metalink note?
Thanks & regards...

Hi
With ASM your life is simple.. Just add the new disks from new storage to ASM and drop old disks and throttle the reblance operations..
ALTER DISKGROUP <DG> Add disk <from new storage>
ALTER DISKGROUP <DG) drop disk <old disks>
ALTER DISKGROUP <DG> REBALANCE POWER 11;
You can query the V$ASM_OPERATIONS to monitor the rebalance progress. Once all the disks are dropped, you can unplug the old storage from the system.
Similarly, you can use ocrconfig -replace ocr/ocrmirror to migrate the OCR (Online)
Votedisks, you need to bring the cluster down (due to a bug in 10g, online if you are 11)..
# crsctl query css votedisk
# crsctl add css votedisk <new vote disk> /crsctl delete css votedisk <old vote disk>

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

How to Migrate 10g sso integrate with EBS 11.5.10.2 to 11g OAM(oracle access manager) with R12.1.3

How to Migrate 10g sso integrated with EBS 11.5.10.2 to 11g OAM(oracle access manager) with R12.1.3
Os:Linux 64 bit
database:11.2.0.3 Rac

Hi,
You could try working through the EBS -> APEX integration article on the Apex community site (http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf)
Rod West

How to Migrate DB2 database to Oracle 10g R2 with this Developer Workbench

Hi
Can anybody tell how to migrate all the data which is present in DB2 to Oracle 10g Release2 through this tool. will it be possible to migrate all the data(tables,stored procedures,views,etc)?.
if anybody knows how to do it please provide me the entire steps for the same.
I am in bad need of help to Migrate my database to Oracle 10g R2
Thanks in expectation,
Selva

Selva,
The link for plugins is: http://www.oracle.com/technology/software/tech/migration/workbench/index.html. You can find DB2 plugins at the bottom of the page.
Regarding the migration procedure, you can start by reading this document:
http://www.oracle.com/technology/tech/migration/workbench/htdocs/101040/user_guide/book.pdf
Good luck,
andrei

How to migrate files from "ORACLE EPM 11" to OBIEE 10g / 11g

Hi
We are moving from ORACLE EPM 11 to OBIEE 10g or 11g .
Can anyone suggest me how to migrate the files from ORACLE EPM11 to OBIEE 10g ?
Regards
Vinod.

It would be a good idea to specify the version you are using.
The general plan can be the following:
A. On source db:
1. Generate scripts for the tablespaces where the schema you want to export has segments (again use toad or ther tools)
2.Generate scripts for the schema you want to export (use toad, dbms_metadata or other tools)
3. Generate scripts for system grants, system roles, privileges you have on objects owned by sys, system, quotas on tablespaces
4. If the schema has grants on sys objects that are not part of the default oracle install but were created later and are specific to that particular db (not a good practice, but it can hapen) and your application is dependent on them, generate scripts for them also (I have come across types owned by sys, when migrating an application with Websphere AS)
5. export schema using exp owner=<SCHEMA_NAME>
6. generate scripts for public synonyms and grants to public on object schema
B. On target db.
1. create tablespaces with generated scripts from A.1.
2. create schema with generated scripts from A.2.
3. grant all privileges from A.3.
4. if non default objects on sys needed, create them with scripts from A.4., grant privileges on these objects
5. imp with option fromuser=<SCHEMA_NAME> touser=<SCHEMA_NAME>
6. create public synonyms, grants from A.6.
7. check jobs - if you import with sys or system user, jobs will be imported under this users; drop jobs nad recreate jobs under your schema
I hope I haven't forget anything and this helps...
Ioan
Edited by: ioan on 6.10.2008 13:00

How to migrate oracle 9i database to oracle 10g

Hi All!
Can anyone tell me the steps to migrate oracle database from 9i to 10g.
what are the prerequisite and preliminary thing to consider...
any thing related to migration.
ThanQ.

Which one is better?
Thanks a lot.
itpub888
Re: How to migrate oracle 9i database to oracle 10g
Posted: Aug 12, 2007 11:17 PM
Hi,
u can go for any of the migration steps provided by oracle..say
1.By using DBUA
2.By using PL/SQL scripts provided by oracle like utlu102i.sql
3. Using exp/imp utilities
4. Using Copy
For further info, u can refer 10g upgrade guide available on OTN
Regards
ramesh

How to migrate oracle 9i to oracle 10g

Hi,
Kindly provide how to migrate database from oracle 9i to oracle 10g.

Oracle change their words.
MIGRATE was used to open the database until 9i to upgrade/migrate the database to a higher version/release.
UPGRADE is used to open the database from 10g to upgrade/migrate the database to a higher version/release.
Well, lexical issue. Generally speaking, we migrate the data, but upgrade the database (the core/software).
Nicolas.
PS : upgradation is not the proper word for upgrade.
Message was edited by:
N. Gasparotto

How to migrate Spatial SDE from 9.3 to 10 and Oracle 10g to 11g

Hi,
I would like ti post a question to ask a help.
We have a task of migrating from Oracle 10g to 11g and at the same time from ArcGis 9.3 to version 10; SDE to SDO but no experience in this type of work.
We are looking for any information that may help us understand what is the best strategy to complete the activity.
Any help is very appreciated.
Thanks in advance.

Hello unnamed user8111502,
In general you want to post your ArcSDE question to the ESRI forums at
http://forums.arcgis.com/forums/32-Geodatabase-amp-ArcSDE
But if you want some advice then I would suggest doing the Oracle upgrade first and the SDE upgrade second - for no other reason than this is what I did and had no problems.
Upgrading Oracle from 10g to 11g is pretty straightforward, there is nothing "special" you need to do as regards your SDE middleware. Just do the 11g upgrade and then upgrade SDE to the 9.3.1 11g version (again not a big deal).
You did not mention the storage type you are using. If you are using SDO_GEOMETRY, then one thing I did notice is the 11g upgrade process will drop and rebuild all your spatial indexes so if you have an huge amount of SDO spatial data on an underpowered machine then your upgrade person should bring a book along as it can take some time.
Upgrading SDE from 9.3.1 to 10 is similarly pretty straightforward. ESRI has made extensive changes to their SDE schema data model but their underlying storage types and indexes and such have not changed. So there is no change to the data itself that I know of. The important thing is that all the ESRI users of your database need to upgrade to version 10 as well. Anyone still on a 9.3 client - this includes desktop users and servers (AGS, IMS) will no longer be able to use the database after the upgrade. As version 10 is backwards compatible with 9.3 it would make sense to have all your clients upgrade to 10 first (and troubleshoot any issues with this) and then do SDE last.
Cheers and good luck,
Paul

Catalog Migration Problem from 10g to 11g

Hi,
When i am trying to migrate catalog of 10g to 11g. They have some problems
1. In obiee 10g (under root folder) it shows only around 5 dashboards. But actually when i am seeing in the I catalog manager of obiee 10g it shows 12 dashboards and pages.
Can some please help me on this how to see the other dashboards and page in obiee 10g ( under root folder ).
2. When i am trying to migrate the catalog folder in obiee 11g it also shows around 5 dashboards. And other dashboards are not seeing after migration.
Can someone please help me on this how to see the other dashboards and pages in obiee 11g as well.

Hi,
In Webcat, there can be some contents that are inconsistent/invalid. And such contents have 0 byte size. Please check if dashboards files that are not visible and their corresponding .atr files have 0 byte size.
Other possibility can be dashboards are hidden for the user-id you are using for login.
Please mark as helpful/correct if this reply helps.
Thanks,
Vijay
Edited by: user5814724 on Apr 8, 2013 4:58 AM

How to migrate the RPD and catalog file from siebel analitics to obiee

hi all
How to migrate the RPD and catalog file from siebel analitics to obiee and obiee to obiee 11g
Thanks
Sreedhar

hi sreedhar,
you can migrate from siebel to obiee 10g...check this out http://debaatobiee.wordpress.com/tag/migration-siebel-analytics-obiee/
Next install OBIEE 11g and migrate obiee 10g to 11g using this http://prolynxuk.com/blog/?p=424
hope answers your questions.
Cheers,
KK

Graph migration 6i to 10g

Hi,
I am working on forms migration 6i to 10g.Now I am facing issue with .ogd files(graph files in 6i).I was able to convert simple ogd file(based on sql query) to rdf but I dont know how to convert ogd files(based on custom query) to rdf(10g).As far as I have tried I could not figure out any method in reports10g to draw graph without
query.So ,can anyone can help how could I convert ogd file based on custom query(procedure) to rdf(10g).Thanks a tonne!

I have a .ogd file based on following custom query.kindly help me how to convert it to 10g graph.
Custom Query is as below:
PROCEDURE set_chart_type(chart_obj og_object) IS
template og_template;
frame_num number;
i number;
ftemp og_ftemp;
ft_num number;
axis og_axis;
plot_type number;
BEGIN
null;
template := og_get_template(chart_obj);
frame_num := og_get_frametype(template);
if frame_num = og_axis_frametype then
begin
i := 0;
loop
ftemp := og_get_ftemp(template, i);
i := i + 1;
end loop;
exception
when og_invalid_ftemp_index then
ft_num := i + 1;
end;
if ft_num = 1 then
-- Column/bar chart
plot_type := og_get_plottype(ftemp);
axis := og_get_axis(template, og_x_axis);
if plot_type = og_bar_plottype or
plot_type = og_bar_plottype + og_line_plottype then
if og_get_position(axis) = og_left_position then
og_set_param('ge_chart_type','column');
elsif og_get_position(axis) = og_bottom_position then
og_set_param('ge_chart_type','bar');
end if;
end if;
null;
elsif ft_num = 2 then
null;
elsif ft_num = 3 then
null;
end if;
elsif frame_num = og_pie_frametype then
og_set_param('ge_chart_type','pie');
elsif frame_num = og_table_frametype then
og_set_param('ge_chart_type','table');
end if;
if og_get_shadowsize(template) != og_none_shadowsize then
og_set_param('ge_chart_subtype', 'shadow');
elsif og_get_depthsize(template) != og_none_depthsize then
og_set_param('ge_chart_subtype', 'depth');
elsif plot_type = og_bar_plottype + og_line_plottype then
og_set_param('ge_chart_subtype', 'connecting-lines');
elsif plot_type = og_bar_plottype and
og_get_plotpos(ftemp) = og_stacked_plotpos then
og_set_param('ge_chart_subtype', 'stacked');
elsif plot_type = og_bar_plottype and
og_get_overlap(ftemp) > 0 then
og_set_param('ge_chart_subtype', 'overlapping');
elsif plot_type = og_bar_plottype and
og_get_scale(axis) = og_pct_scale then
og_set_param('ge_chart_subtype', 'percent-scaling');
elsif plot_type = og_bar_plottype then
og_set_param('ge_chart_subtype', 'plain');
end if;
END;
kindly help me how to migrate such graphs in 6i to 10g.Thanks in advance !

Challenge question and password migration from oimm 10g to 11g r2

hi all,
can you please tell me how do i do the migration of oim 10g user's password and challenge questions to oim 11g r2. Do we have any api to do it. these values are in encrypted format in oim db.
thanks

Run your sql query to output the encrypted fields to a flatfile or csv, and include the usr_login field so you know which user to assign the values to.
Copy your config folder from your oim server and create a patch like c:\xellerate\config. In your code, when you connect to OIM, use this:
System.setProperty("XL.HomeDir", "c:/xellerate");
System.setProperty("java.security.auth.login.config", "c:/xellerate/config/authwl.conf");
Now, when you read the file and have the encrypted field, use this code:
String decryptValue= tcCryptoUtil.decrypt(encryptValue, "DBSecretKey");
Now that you have the unencrypted value from your 9x instance, you can use the APIs to set challenge questions, and set user passwords with the 11g APIs.
-Kevin

How to Migrate 9i to 10g??

Similar Messages

Maybe you are looking for