How to migrate a SAP Oracle 9i to Oracle 10g (on a new machine) ?

Hello,
Do you know the proper procedure of such a migration : Migrate a SAP Oracle 9i to a new machine : HP-UNIX, Oracle 10g.
My understanding :
(1) Setup the new machine
(2) Install the latest version of HP-UX
(3) Install Oracle 10g database program
(4) Use Oracle Export / Import to copy my existing SAP Oracle 9i to this newly installed Oracle 10g machine.
(5) copy or tar all the SAP related files, eg.BRTOOLS, ABAP reports, to the new machine
(6) Modify all the configure files since the machine name is different.
Is it correct ?
Is it the most appropriate method ?
Is Export / Import a proper way to migrate an Oracle to a new version ?
Should I use Data Gurad instead ?
Finally, for this migration issue, any SAP Note you will suggest ?

There are two ways of doing this:
a) You do a system copy using R3load
This will give you a "free" reoganization because the tables will be loaded into the database as if you were doing a new installation. The disadvantage is, that it takes more time and good planning.
b) you do a system copy using backup/restore together with the database upgrade
This is a fast way to get your system upgraded and if something goes wrong you can still use the old system. Check
Note 932722 - Upgrade to Oracle 10.2 during a database copy
this is a note for Windows but you can adapt it to be used on Unix/HP-UX too.
And just as a remark:
The "free" support for Oracle 10g is ending next year in June (see Note 1339724 - Oracle 10.2 Extended Support free until July 31, 2011) - after that you have to buy additional support if you want to continue to run 10g. If you run now a migration/upgrade project, why not upgrade directly to 11g?
Markus

Similar Messages

  • How to migrate data from MS Access to Oracle???????

    how to migrate data from MS Access to Oracle???????

    You can use heterogeneous services (HS) connection to MS-Access from Oracle and still use the same PL/SQL (or even a single CTAS statement) or SQL to load directly to Oracle tables. It's transparent, quick and clean as opposed to writing complex control files.
    You might have to set the ODBC connection to your Access database and add the details to Oracle listener.
    Please let me know if you are not sure how to set up the connection.

  • How to migrate the  SAP KM Content to MS SharePoint

    Hi
    How to migrate the  SAP KM Content to MS SharePoint
    Is there any links that can give me brief view on this

    we can integrate portal content to share point check this below link for[  Integrating SAP Portal Content into Microsoft SharePoint Portal Server|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6844e48d-0901-0010-b4b2-d5666689ca8b] and [Integrate Microsoft Sharepoint Services into Knowledge Management|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ba1508-27e7-2a10-2295-9dab5b78c614]. hope these helpful.
    regards
    Mahesh

  • How to Migrate Ms SQL Server 2005 to Oracle 9i

    Hi all,
    How to migrate MS-SQLServer to Oracle 9i. in migration work bench lists only SQLSERVER 2000
    Thanks
    Abk

    Oracle Migration Workbench is outdated and replaced by SQL Developer Migration Workbench.
    Have a look at:
    http://www.oracle.com/technology/tech/migration/workbench/index_sqldev_omwb.html

  • How to migrate sql server image type to oracle BLOB

    In SQL Server table I have Image data type field. How to migrate image type field to oracle BOLB type field. I am using SQL server DTS to transfer the data.
    If we map, will it care ?
    Thanks,
    Venkataraman L

    Hi you might want to post your question in General Forum.
    General Database Discussions
    There's very few users visit this forum.

  • How to Migrate VM Server pool to Other Oracle VM Manager

    Hi,
    I want to move oracle server pool from One Oracle VM Manager to other VM manager.
    Can any one help me on how to migrate vm server pool to other VM Manager.
    Thanks & Regards
    YJR

    Hi,
    unfortunately I don't know of an easy supported way.
    The process itself is pretty similar to migrating serverpools to Enterprise Manager as described in this note:
    Migrating from Oracle VM Manager to Enterprise Manager Grid Control (Doc ID 807091.1)
    With the exception that you simply register the new pool in a new manager and then have to rediscover all VMs.
    So overall it is a simple "delete serverpool" and "create serverpool" with additional import of virtual machines.
    If during this steps a problem arise, you still can deconfigure everything and reregister with the new manager (with the help of cleanup.py).
    Regards
    Sebastian

  • How to migrate HPSu 8.3.2 to Oracle EPM 11.1.2.1?

    Dear Experts,
    We need your expert advice on HPSu 8.3.2 migration to Oracle EPM 11.1.2.1.
    Client is having more than 2000 scheduled Jobs and approx 3000 published Bqys in HPSu 8.3.2. Now they want to migrate their current environment to Oracle EPM 11.1.2.1 on New Hardware.
    Kindly share your views on below
    1. Can we migrate HPSu 8.3.2 to Oracle EPM 11.1.2.1 directly?
    2. Can we use Report Migration Utility to Migrate report from HPSu 8.3.2 to Oracle EPM 11.1.2.1? Is Report Migration Utility availabe in Oracle EPM 11.1.2.1?
    3. Can you please share any known issues if anyone has performed such migration successfully?
    Any insight would be highly appreciated.
    Thanks in advance.
    Regards,
    Manmohan Sharma

    VC Thanks for your reply.
    What will be the migration path? Is below upgrade path is adviceable?
    HPSu 8.3.2 to Oracle EPM 11.1.1.3 ( Migrate reports using Migration Ultility)
    Oracle EPM 11.1.1.3 to Oracle EPM 11.2.1 Upgrade
    Any inputs will be highly appreciated.
    Thanks in anticipation.
    Regards,
    Manmohan

  • How to migrate an ACCESS 2000 Database to Oracle ?

    Hi,
    I need to migrate an ACCESS 2000 Database to Oracle. Is there any tool to help me in this work ?
    Regards.
    Pascal

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pascal:
    Hi,
    I need to migrate an ACCESS 2000 Database to Oracle. Is there any tool to help me in this work ?
    Regards.
    Pascal<HR></BLOCKQUOTE>
    The Oracle Migration Workbench version 1.4.1.0.0(available from OTN at http://otn.oracle.com/tech/migration/workbench/content.html) will migrate an ACCESS 2000 database.
    null

  • How to migrate iTunes Library from an external hard drive to a new Mac Book Pro?

    How to migrate iTunes and iPhoto librarys from an external hard drive to a MacBook Pro?

    With iTunes:
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the whole iTunes folder and all its subfolders and files intact to Home > Music on your computer. It will replace the one that may already be there and anything you have in it will be lost -- you could give the folder a different name just in case, and delete it yourself later.  Unplug the external and start iTunes.

  • How to Migrate from SAP BO XI 3.1 system to SAP BI 4.1

    Hello Gurus,
    I got a new project and I have to start Upgrade and Migration from BO XIR3.1 to BI 4.1. Please help me out here. More detail are given below. Appreciated in advance.
    1.1    Technical Scope
    Installation of only a production SAP BI 4.1 environment.
    Repository is currently on DB2 but will be on SQL Server for the BI 4.1 implementation.
    All VMware machines: The new architecture calls for 12 VM servers.
    Row-level Security in the universe for authorization of content and Enterprise for Authentication (no SSO). Matrix security model with custom level groups which gives Basic, Intermediate, and Advanced level users to pre-defined folders and content.
    Migrate content (objects, universe and instances) from SAP BO XI 3.1 to SAP BO BI 4.1 for the technical upgrade, the details are below:
    Universes will stay in the UNV format and will not be converted to UNX.
    Only WebI Documents
    All Controlled Folders - (~5600 documents)
    174 Total objects in Public Documents folders (All documents to upgrade & remediate)
    5,433 Total WebI reports in Corporate and other folders (All documents to upgrade, & remediate)
    User Folders – (~6,000 documents)
    6000 + Webi documents accessed in 2013 ( All 6000 + documents to upgrade, NO remediation)
    Inbox – None will migrate
    Total Documents to remediate: up to 5,607
    Migrate all universes and connections
    Migrate all Xcelsius and agnostic documents with no remediation.
    The estimated report count for remediation by complexity, Low-1525, Medium-150 and High-50.
    Assumes a 10% report remediation effort described earlier sections
    Report remediation: should it exceed the base assumptions made in this document, will be implemented as a Change Order. Effort for such change will be mutually agreed between parties. Price to project is determined using this effort and blended rates.
    Testing:
    Conduct planning and inventory analysis; Reusable templates for Migration Plan, Validation.
    Perform migration
    Use the Right Sized Testing framework to plan and conduct testing
    Use the automated Reports Compare tools to compare large volumes of excel / xml data
    Templates based remediation– ensures quality control
    Thanking you best regards.
    AK.
    Message was edited by: Simone Caneparo
    reduced title length

    Hello Mark,
    Thanks for your help. Appreciated.
    Do you know or some one know, how to create at report for Audit purpose of BO 3.1 Universes's Connection, Database type, Network Layer and so on... I want to pull all info in to Webi report which are you seeing in the pictures.
    Please see the attached file.

  • How to migrate ACCESS2000 ON UPDATE CASCADE to ORACLE 8i ?

    Hi all,
    I use ON UPDATE CASCADE constraint in ACCESS database.
    When I use the Access WorkBench, ORACLE Said that ON UPDATE
    CASCADE are not supported.
    Is there any solution ?
    Regards
    Pascal

    Check <a href="https://websmp209.sap-ag.de/osdbmigration">OS-DB-Migration Site in SAP Service Marketplace</a>
    Here (Goto Media Library) you'll also find the actual <a href="https://websmp209.sap-ag.de/~sapidb/011000358700002608772002E.pdf">SAP OS/DB Migration Check Planning Guide</a>
    After checking out the ressources mentioned above you can't be more specific...

  • How to migrate a weblogic project files into oracle 9i JDeveloper?

    Hi,
    I have a simple customer registration website (on top of 8.1.7 DB using oracle jdbc thin driver) as follow:
    It is all under c:\weblogic\myserver\public_html\jsp\
    (Which is the document root)
    12 html files under c:\weblogic\myserver\public_html\jsp\
    40 JSP files under c:\weblogic\myserver\public_html\jsp\cut
    10 image files under c:\weblogic\myserver\public_html\jsp\images
    1 java package under
    c:\weblogic\myserver\public_html\servletclasses
    The following is from the properties file under weblogic directory. What do I need to configure in oc4j as a web logic
    weblogic.jdbc.connectionPool.examples-dataSource-demoPool=\
    url=jdbc:oracle:thin:@mymachine:1521:db03,\
    driver=oracle.jdbc.driver.OracleDriver,\
    loginDelaySecs=1,\
    initialCapacity=2,\
    maxCapacity=4,\
    capacityIncrement=2,\
    allowShrinking=true,\
    shrinkPeriodMins=15,\
    refreshMinutes=10,\
    testTable=dual,\
    props=user=cut1;password=cut1
    weblogic.allow.reserve.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
    weblogic.allow.reset.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
    weblogic.allow.shrink.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
    weblogic.jdbc.TXDataSource.examples-dataSource-demoPool=examples-dataSource-demoPool
    weblogic.jdbc.DataSource.examples-dataSource-demoPool=examples-dataSource-demoPool
    It there any how to steps to import it and be working- into Jdeveloper and deploy it against oc4j that I downloaded as a web server. I searched and contacted friends even at oracle and reached dead end.
    Is there a migration from bea to oracle 9i that exist and that is tried and found to be working?
    If so what are the details that makes it successfull all the way?
    Can all those files be maintained in JDeveloper 3.2.3 or 9 keeping -your recommended- directory sturcture?
    What are steps to setup the web server?
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version I.E 5.5
    - O/S + Version Windows 200 Proffessional SP2
    *** Because of JDeveloper ***
    *** However please recommend any web server on HP or Sun ***
    - Error Msg N/A
    - Oracle 8.1.7 with thin JDBC driver

    There are two ways of doing this:
    a) You do a system copy using R3load
    This will give you a "free" reoganization because the tables will be loaded into the database as if you were doing a new installation. The disadvantage is, that it takes more time and good planning.
    b) you do a system copy using backup/restore together with the database upgrade
    This is a fast way to get your system upgraded and if something goes wrong you can still use the old system. Check
    Note 932722 - Upgrade to Oracle 10.2 during a database copy
    this is a note for Windows but you can adapt it to be used on Unix/HP-UX too.
    And just as a remark:
    The "free" support for Oracle 10g is ending next year in June (see Note 1339724 - Oracle 10.2 Extended Support free until July 31, 2011) - after that you have to buy additional support if you want to continue to run 10g. If you run now a migration/upgrade project, why not upgrade directly to 11g?
    Markus

  • How to migrate Azure SQL Codefirst DB to Oracle database?

    Hi,
    we have been developing a Web application with Windows Azure Code first  SQL DB using Code first approach.
    In the future we want to migrate our Azure SQL Code first DB to Oracle. If we migrate it to Oracle, does the application works fine? or do we need to do any additional actions in migrating from Azure SQL Code first  db to Oracle DB?
    It would be great if  anyone provides me complete information on this.

    Hi,
    You should be able to move the Azure SQL Code First Database to Oracle Database. You will have to make minor changes, for e.g connection string.
    Please have a check on the below link which talks about using Entity Framework 6 Code First with Azure SQL database as a backend. It will give you an idea on how to approach your migration.
    http://www.asp.net/mvc/overview/getting-started/getting-started-with-ef-using-mvc/migrations-and-deployment-with-the-entity-framework-in-an-asp-net-mvc-application
    Regards,
    Mekh.

  • How to migrate  from R/3 4.6 Oracle 9.2 /HPux to SQL on NT platform

    Hello all:
    I am very new to SAP and need to know where to start with this project.
    We are migrating from HP/UX Oracle 9.2 database SAP R3 4.6c to NT based SQL server. After Migration we will be upgrading to ECC5 or 6.
    Can you please tell me where to start. If possibile please be as specific as you can.
    Regards,
    Kourosh

    Check <a href="https://websmp209.sap-ag.de/osdbmigration">OS-DB-Migration Site in SAP Service Marketplace</a>
    Here (Goto Media Library) you'll also find the actual <a href="https://websmp209.sap-ag.de/~sapidb/011000358700002608772002E.pdf">SAP OS/DB Migration Check Planning Guide</a>
    After checking out the ressources mentioned above you can't be more specific...

  • How to migrate from SAP content server to OPENTEXT?

    We have been using SAP content server as our storage for archived data for years.
    Now we plan to start using OPENTEXT to admin our archived data.
    How can we use OPENTEXT together with existing SAP content server?
    My idea is to treat content server as any other media as as DVD, WORM, etc.
    However, I do not see that OPENTEXT can be configured to admin content server .
    If so, how to transfer whatever on the content server to IXOS?
    We are at Opentext 9.5.x
    Please share your experience. Thanks!

    hi,
    Please refere SNote 1043676.
    Also, need to understand the following,
    How to move an entire content repository from one content server to another
    Sometimes you may need to move a content repository - but not necessarily all the content repositories from one content server to another. This can be done without much drama. Here is a means that I've used in the past:
    Use report RSCMSEX to export the repository from the source content server.
    Create a repository of the same name on the target content server.
    Use Report RSCMSIM to import the repository into the target content server.
    Delete the repository from the source content server (if desired!).
    The SAP progrm sapkprotp controls the import and export. The ABAP reports allow you to specify the RFC destinations where sapkrpotp runs.
    For lager repositories
    The programs  listed above cannot deal with the whole content repository at the same time. For a slower migration, try using the program RSIRPIRL. This approach allows you to do the migation on a live system.
    Create the new content repository on your new content server.
    Create the new content category.
    If using distribution, distribute the new documents to the new category. otherwise change redirected category for DMS_C1_ST
    Relocate using the program.
    benaakraja

Maybe you are looking for