How to migrate AS 10g from RH EL 2.1 to RH EL 3?

hello,
i would like to know if some of you could tell me the fastest way to migrate the operating system under an oracle AS 10g R1. in detail, i need to upgrade my operating system from redhat enterprise linux 2.1 to redhat enterprise linux 3. if linux version were the same, i could create a tar from the old oracle system and install in the new one, but - as the linux version is different - i need to relink and recompile some part of the oracle code. so how can i proceed???
the only thing i'm thinking to is to reinstall a new oracle as 10g on a redhat el 3 and then export the portal db schema from rh 2.1 and import it on rh 3 already installed, but this solution will not export my as configuration (as the virtual hosts, the changing of the http server ports,...).
any idea?
regards,
fabrizio

I recently did a kernel upgrade from RH4 to RH 4.2 without any problems but this is not what you guys are asking.
The easiest way should be to have a backup of the complete Oracle stack , upgrade the OS following the instructions from RedHat and then you have two possibilities:
a) Try to get everything fromOracle back running (might include a relink) and if this fails as an earlier post suggested
b) Re-install the software without the database (or the metadata repository) and copy this one back from the backup. Even this could fail due to some changed libraries so you'll need to investigate the compat-libs from RedHat.
If everything fails ask support for an upgrade path.
cu
Andreas

Similar Messages

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

Migrating to 10g from Oracle 7

Hi all,
The company is planing to migrate to 10g from Oracle 7.
I have heard that it is impossible to migrate directly from 7 to 10g using dbua.
Is it possible using export/import. I have not worked on 7 or 10g.
Also how can we move from forms3 to forms 6i.
Thanks in Advance,
Sanju

As for Forms, read the documentation and view the tutorials on
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
(especially 'Upgrade character mode Forms to the Web')
Also: http://www.oracle.com/technology/products/forms/pdf/264850.pdf
You will probably first have to upgrade to Forms 4.5, then to 6i.
Going from character mode to a graphical user interface is not so easy. You may consider a professional tool like the converter from Kumaran.

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?
The Firewire disk is connected and have been able to copy across document folders etc, but Migration Assistant doesn't find the disk so that method no good. Any help appreciated.

Thanks, that looks very comprehensive. Wish I'd seen it before completing Set-Up Assistant initially! Will follow his instructions and report back.

How to migrate publish service from Lightroom 4 to Lightroom 5?

I have been upgrading from LR4 to LR5. Then I imported the LR4 catalog. But no Publish service was following to LR5.
I have used the FLICKR plugin a lot - made more than 80 FLICKR-sets. Therefore I would be terribly sorry if I do not succeed in restoring the contact to the old service files. Does anybody know how to migrate publish services from Lightroom 4 to Lightroom 5? Very fine if it's going to be a kind of a workaround.
Best regards
Jimmy

You'll need to backtrack a little, open your LR4 catalogue in LR5 and allow it to upgrade the catalogue with publish services.
If you've done work on images in the "wrong move" catalogue, identify those images, select them, and do a File > Export as Catalog. in the "right move" catalogue, bring this work in by File > Import from Another Catalog.
Alternatively, it may be worth looking at Jeffrey Friedl's Flickr plugin as he may have looked at this problem. Maybe someone here will know if it would help.
John

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

How to Migrate VO Extension from One Instance to Other

Hi,
How to Migrate VO Extension from One Instance to Other.
Thanks
Vishnu

Move the VO.xml and Class files as usual to other Environment.
Also move the .jpx of the Project and run the jpx importer.
Thanks
--Anil

How to migrate source code from TFS 2010 to a new TFS 2010

Hi,
Please help me, How to migrate source code from TFS 2010 to a new TFS 2010. we are using SQL 2008 R2 for DB storage and we have Backup of TFS DB. First TFS 2010 is live environment and second TFS 2010 is test environment both OS and SQL version is same.

Hi Pankaj0439,
In general, to move TFS from a hardware to another, you can follow the steps as below:
1. Check your permissions
2. Back up databases and install software
3. Restore TFS databases to the new hardware
4. Update the configuration of the new application-tier server
5. Verify permissions, notify users, and configure backups
And you can also refer to this
article in MSDN for more details.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010 . Please suggest ?
Aditya Mediratta

Hi Aditya,
please find the answer in
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
Please ensure you have a working mailflow from Exchange 2003 to 2010, vice versa, before you begin.
Basically it's the same procedure as adding some PF Database in E2K3; just
run .\AddReplicaToPFRecursive.ps1 -server "Exchange 2010 Server" -TopPublicFolder "\" -ServerToAdd "Exchange 2010 Server"
Wait until some initial data started to replicate; after that run
Update-PublicFolderHierarchy -Server "Exchange 2010 Server"
After replication has finished you can do a
.\MoveAllReplicas.ps1 -Server "Exchange 2003 Server" -NewServer "Exchange 2010 Server"
Please let me know if it worked.
Kind regards,
Martin

How to migrate the Workbooks from BW3.1 to BI7

Dear Team,
How to Migrate the workbooks from Bw3.1 to BI7. We have recently upgraded to BI7. What are necessary steps and necessary cares needs to take for this.
Best Regards,
SG

Migration is manual. When you open up a 3.x component in a 2004s tool in migrates it. There is no automatic migration available
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Migrating Advanced BEx Analyzer Workbooks - What VBA is Supported?
Hope it Helps
Chetan
@CP..

How to migrate webanalysis reports from System 9.2 to System 11

how to migrate webnalysis reports from 9.2 to Hyperion System 11. I know the migartion utility only works for Pre system 9 products. We have new env of sytem 11 and succesfully migrated planning and HFM from 9.2 to system 11. How to migarte webanalysis reports.

Have you been able to resolve this ?
There are various approaches possible, depending on the amount and the folder structure of your reports.
One is to use life cycle management (not sure how stable it is in 9.2), the other is the import/export tool within web Analysis
Hope this helps,
Jeremie

Using i-setup, how to migrate EBS configuration from one Business Group to the other within the instance?

Using i-setup, how to migrate EBS configuration from one Business Group to the other within the instance?

Sandeep,
Yes, I think your command format is not correct.
Try the one that Rod posted.
About the note on metalink. It seems that it is under review.
Here is the basics of the note:
1. Determine the owner of the workbook. Say UserA.
2. Open an sqlplus session to the database.
3. Run the following sql:
SQL> set heading off
SQL> set feedback off
SQL> set echo off
4. Now spool the result of the following sql to a file.
SQL> spool c:\exp.bat
5. Run the sql statement
NOTE: CHANGE DISCOE_HOME
SQL>select '<Disco_Home>\discvr4\dis4adm /connect
EUL_owner_name/passwd@connect_string /export c:\'||rownum||'.eex /workbook "'||
doc_created_by||'.'||doc_name||'"' from
SELECT EUL4_DOCUMENTS.DOC_NAME, doc_created_by, NVL(EUL4_EUL_USERS.EU_USERNAME,
'Document Not Shared') shared_with
FROM EUL4_ACCESS_PRIVS EUL4_ACCESS_PRIVS, EUL4_DOCUMENTS EUL4_DOCUMENTS,
EUL4_EUL_USERS EUL4_EUL_USERS
WHERE ( EUL4_DOCUMENTS.DOC_ID = EUL4_ACCESS_PRIVS.GD_DOC_ID(+) ) AND (
EUL4_EUL_USERS.EU_ID(+) = EUL4_ACCESS_PRIVS.AP_EU_ID )
where doc_created_by='UserA'
where,
Disco_Home is the Location or Discoverer 4 Home.
4. SQL> spool off
5. SQL> set feedback on
6. Now run the batch command file (exp.bat)
Regards
Roelie Viviers

How to migrate a table from ORACLE 10g to 8i

have table named 'liuxg_tab_01' in 10g.
This morning I exported this table using 'exp' and then tried to imp it into 8i, I failed.
After a while, I created a database link named 'ctf' in 8i which connected to 10g. I issued 'create table test as selct * from liuxg_tab_01@ctf',it returns 'ORA-01723'.
Then I extraced the DDL of 'liuxg_tab_01' from 10g with QUEST TAOD, it's:
CREATE TABLE LIUXG_TAB_01
OWNER VARCHAR2(30 BYTE),
OBJECT_NAME VARCHAR2(30 BYTE),
SUBOBJECT_NAME VARCHAR2(30 BYTE),
OBJECT_ID NUMBER,
DATA_OBJECT_ID NUMBER,
OBJECT_TYPE VARCHAR2(19 BYTE),
CREATED DATE,
LAST_DDL_TIME DATE,
TIMESTAMP VARCHAR2(19 BYTE),
STATUS VARCHAR2(7 BYTE),
TEMPORARY VARCHAR2(1 BYTE),
GENERATED VARCHAR2(1 BYTE),
SECONDARY VARCHAR2(1 BYTE)
But I can not create a table using the upper DDL in 8i if I do not wipe off those "BYTES".
After creation of the table using the upper DDL without those 'BYTES', I sucessfully executed 'insert into LIUXG_TAB_01 select * from liuxg_tab_01@ctf'.
Anyone has a better method to move a table from ORACLE 10g to 8i?

1) The particular version of 8i and 10g in use here would be useful. I'm not sure that Oracle supports database links between any version of 8i and any version of 10g, though, so you're probably lucky that it worked as well as it did.
10g 10.1.0.3.0 and 8i 8.1.7.0.0
2) What version of the export utility did you use? You would need to use the 8i version to generate the dump file to have any chance of working, not the 10g verion.
I use the 'exp' provided with 10g 10.1.0.3.0 and 'imp' with 8i 8.1.7.0.0. I have tried to export data directly from 10g 10.1.0.3.0 using 'exp' provided with 8i 8.1.7.0.0. Failed.
3) Why? Since 8i is desupported, there isn't a lot of call for tools to move data from supported releases to unsupported releases.
We have an 8i DB which is still porivding insentive services. We just wanna migrate some tales from 10g to it.
FYI, NLS_LENGTH_SEMANTICS was introduced in 9i, so it's no suprise that 8i objected to the BYTE keyword in the DDL.
What's FYI :P
Another option would be to generate a CSV file of the data from 10g and use SQL*Loader to load it into 8i. Not sure this would be any easier, though.
Justin
Message was edited by:
user510846

How to migrate the data from DB to another DB

Hi folks,
             In my project I have one requirement. Let me explain in detail we are maintain two databases one for
             master database called *GIIS* and one is history database HIST. Both DB version is 10g R1.
             (Both DB’s have same no table as well structures)
             1. The GIIS database contains nearly 400 tables (master table as well as temporary table)
                   each Master table having it’s own temporary table.
             2. Whenever we made the entry first it will go to temporary table after authorized that entry it will move to the master table
             3. But the temporary table contains the data after move to master table .
             4.     The temporary table data’s will be move to the HIST database each and every day at the night.
                This migration we done through the procedure. After migration complete the temporary table data’s will de deleted.
My Question:
           1.     Whether it’s good practice to migrate the data from GIIS DB to another HIST DB using oracle stored procedure.
                 (we created the DB link from GIIS to HIST)
           2.     If not can any one suggest me the way to migrate the data from GIIS to HIST.?
           3.     Is there any other possibility to migrate the data from GIIS to HIST with out using procedure?Thanks
Arun

Arun wrote:
Hi Mr.Aman Brother
First of all sorry . I am not saying that don't command my requirement. Just i want know the way of migrate the data from one DB to another DB.
you saying that IMPORT/EXPORT is one of the way to do migration.
But in client side they don't know how to do the IMPORT & EXPORT the database..
Can you suggest me the another way to do that
Arun,
If the client doesn't know how to do exp/imp, I would really doubt and would be immensely concerned before suggesting the client any other way. If they don't know, tell them that there is a concept called test database which is used for learning so they should invest time to learn this technique since the other options suggested by fellow members are far more tougher than this one.
Aman....

How to migrate iTunes Library from an external hard drive to a new Mac Book Pro?

How to migrate iTunes and iPhoto librarys from an external hard drive to a MacBook Pro?

With iTunes:
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to Home > Music on your computer. It will replace the one that may already be there and anything you have in it will be lost -- you could give the folder a different name just in case, and delete it yourself later. Unplug the external and start iTunes.

How to migrate AS 10g from RH EL 2.1 to RH EL 3?

Similar Messages

Maybe you are looking for