How to migrate existing BPC into an pre-existing BW on HANA

We have BPC 7.x on BW on Oracle.We have a SAP BW 7.3 on HANA, Now we want to migrate this BPC into the BW on HANA which has other content.
How do we do it ?

One more question
We have consolidation . So we cannot use BPC 10.1 unified. We will have to go for 10.1 classic.
Assuming we will go for 10.1 classic are the following steps still relevant ?
1.     BPC_HANA_MIGRATE_FROM_10     ( may be FROM_101)
2.     Set SPRO paramter ENABLE_ACCLERATOR = Y and ACCELERATOR_ON = Y
My feeling is those are still relevant.
But need your expert opinion.

Similar Messages

  • How to migrate soa 11g into osb11 g

    how to migrate soa 11g into osb11 g

    http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
    In a forum of volunteers using 'urgently' is considered very rude.
    Please edit your post and remove it, and do not use it in any of your future posts.
    Sybrand Bakker
    Senior Oracle DBA

  • How do I find the ports a pre existing program used in DAQ?

    Hi all, 
    I am setting up a laser displacement sensor and trying to utilize a pre existing program that was created by graduate students before me. There are 4 wires coming from the laser displacement sensor that need to be connected to the DAQ but we have no information telling us where these wires are supposed to attach to the DAQ in order to run the pre existing program correctly. 
    Is there any way that we could figure this out? 
    Thank you for your help,
    mccutchen12c

    James, 
    Thank you for your help! Yes, we have looked at a couple different methods on how to tell if the information had been programmed by the previous grad students and we haven't had any success in finding that information. So I believe you are right in assuming its not documented.. We will do a better job of documenting for future grad students after us. 
    I have attached our code. Any insight you could give would be greatly appreciated!
    We have an Acuity AR200-6 laser displacement sensor with green, yellow, black and a wire that isn't wrapped that all lead to the serial port in the back of the computer and ground. We then have white, blue, orange and brown wires that do not have a location.. We did some research and the are as follows:
    white: laser disable
    blue: buttons disable
    orange: voltage output
    brown: voltage RTN
    We are starting to wonder if we are just not supposed to use the DAQ.. Can you confirm the connection is solely through a serial port? 
    Cheers, 
    Carley

  • Adding a character into a pre-existing filename; Bridge CS5.1

    I would like to know if it is possible  to add a character or in my case a ( Character & a Space ) in-between an already  pre-existing sequential number
    For example,
    1301 Filename.jpg - - - - -> 13 01. Filename.jpg  ( Added a ( Space ) inbetween the two numbers, and placed a ( Period ) aswell.
    I would like to do this action to a group of files using the Batch Rename Feature; inside of Adobe Bridge CS5.1
    Is this possible? Is there a work around?

    I understand how string substitution works, you are misinterpreting the question.
    I would like to change the number sequence from.
    1301 Filename.jpg - - - - - - - -> 13 01. Filename.jpg
    1302 Filename.jpg - - - - - - - -> 13 02. Filename.jpg
    1303 Filename.jpg - - - - - - - -> 13 03. Filename.jpg
    1304 Filename.jpg - - - - - - - -> 13 04. Filename.jpg
    1305 Filename.jpg - - - - - - - -> 13 05. Filename.jpg
    As you can see I would like to ( Add ) Characters not replace. the characters being a ( Space ) and a  ( Period )
    But if there is a way to replace all of my sequence numbers together, that would be a viable option aswell.As of now I am not aware of a substitution command that will get rid of say a four digit combonation of numbers no matter what the actuall numbers
    That last sections of what you copy and pasted states there may be commands ( Expressions ) to replace filename patterns, but I am not aware of any specific commands ( Expressions ) I must type inside of the text bar to achieve the affect I am looking for.
    Any pre-existing help on Expressions?
    They are foreign to me and I would like to study the information for future use.
    I will be searching Google, if by chance I come across information pertaining to this subject, I will let you know. As of now any help is much appreciated.
    Ok I have figured out how to get rid of the string of numbers by using the Regular Expression of [0-9] but,
    I still do not know how to add a ( space ) inbetween the numbers without doing it all manually.
    Regular Expressions is the answer to my question, but now I have a new question. Which Regular Exresion do I use? It seems like it will take quite some time to get a good understanding of Regular Expressions, is there anyone who has a fair amount of knowledge on the subject who is willing to assist me in the mean time?

  • How to Migrate BSP applications into WDA

    Hi,
      We have some BSP application,is it possible to migrate BSP application into WDA or we need to

    There are no automated translation tools from BSP to WDA.  Although similar in structure (both MVC and Unified Renderer based), the technology implementation is very different. BSP uses MVC - and has Model and Controller objects. However these ABAP classes are in no way compatible with what Web Dynpro generates.  WDA also has the concept of Context which doesn't exist at all in base BSP (although CRMUI does have a context, this is just a wrapper around the BSP model class and isn't compatible with the WDA context either).
    The view becomes even more problematic.  Although the HTMLB, XHTMLB, and PHTMLB tag libraries are similar to the standard UI elements in Web Dynpro, the WDA versions are much more advanced. You probably could map most of the properties and tags to WDA, but not everything.  However the fact that in BSP you can inject any custom HTML and JavaScript becomes an issue because there is no way to do the same in WDA.
    Overall, you should just start from scratch and redesign the application as WDA.

  • How to reset an iPad with a pre-existing Apple ID/iCloud acct?

    We just bought a new (to us) iPad mini to use at our preschool in one of our classrooms.  The iPad mini came with a pre-existing account still loaded on it and will not let me set it up like the other 6 we already own (with our school's Apple ID/iCloud acct.  What can I do to get this setup other than trying to contact the previous owner (which we have and haven't received an answer)?
    Thanks in advance!

    You can't reset the code. The only option you have is to restore the device as new.

  • How to migrate my-sql into ORACLE!

    I have this database running in my-sql. nOw i want to convert into ORACLE.Can anyone shed light on this please..does sql loader
    support this?
    Thanks in advance..your help will be much appreciated..
    ashish

    Do you want to migrate code or data?
    If its code you'll probably have to do a manual rewrite. Sometimes there are utilities to convert code from one system to another, but some manual fixes are usually necessary even when these exist.
    If its data there are copy utilities. As Satish pointed out you could use SQL*Developer, or possibly Oracle Migration Workbench

  • Upload an iMovie into an pre-existing iWeb project and on to New MobileMe?

    Switching to NewMobileMe appeared to work, but one of my iWeb projects lacks an iMovie insert. The means noted in iWeb involve MobileMe Gallery, of course, that no longer exists. Is there another way to insert my iMovie into my project before publishing it to New MobileMe?

    'Afternoon, Wyodor...
    My thanks for your prompt suggestion, which I followed immediately. The result is not quite what I expected, but it may be OK. As you can see, the visual result is something that merely looks like a text box:
    Is this the desired result? (I expected to find a still frame from the movie clip.) Will the clip only appear once I've (re)published the website?
    Thanks again.

  • How to migrate SQL Cluster into Virtual SQL server or Virtual SQL Cluster

    Hello All,
    Currently we will be attempting to migrate a SQL cluster of (2 systems) into are virtual enviroment.  We have been tracking the system requirements with Vmware Consolidation Tool and IO Meter to make sure our hosts have enough resources to accomidate this.  All the metrics coming back looks like it will run just fine virtulized as the cluster was just for failover purposes anyhow and not for performance purproses.  With that said a few questions have come up.
    1.)  What is the best way to virtulize this or to convert it (P2V)
         -  Should we just create a new Virtual Machine and install the same version of SQL and do a manual migration to the new SQL server and leave it as 1 SQL server with HA
         -  Or is there a way to P2V this kind of a setup ? if so what are the steps involved?
    2.)  If a P2V is possible I was under the impression that you will have to use a RAW mapping for the hard disks otherwise the cluster will not work ?  Can anyone speak to this? as I'm pretty sure I have clustered windows server 2008 without RAW mapping before but not with SQL

    Another quick question.  The Vmware SQL Clustering KB article says:
    vSphere MSCS Setup Limitations
    Before you set up MSCS, review the list of functionality that is not supported for this release, and any
    requirements and recommendations that apply to your configuration.
    The following environments and functionality are not supported for MSCS setups with this release of vSphere:
    n Clustering on iSCSI, FCoE, and NFS disks.
    n Mixed environments, such as configurations where one cluster node is running a different version of ESX/
    ESXi than another cluster node.
    n Use of MSCS in conjunction with VMware Fault Tolerance.
    n Migration with VMotion of clustered virtual machines.
    n N-Port ID Virtualization (NPIV)
    n With native multipathing (NMP), clustering is not supported when the path policy is set to round robin.
    n You must use hardware version 7 with ESX/ESXi 4.0.
    Can you not do clustering if your shared storage is iSCSI ? or can you not do RAW mapping with it to create the cluster ?

  • How to insert/paste image into / over an existing image?

    I have a colorized file that's
    open in Photoshop 6.0 and I want to past a small icon onto a specific spot or area of this
    open image. I am at a lost as to how I can achieve this. Keep in mind th
    is open illustration is basic line art in color and all I want to do is take an existing image I already have saved in the sa
    me folder but want to place it or overlap it onto that main image I have - Thank you!

    Actually, Photoshop 6.0 automatically creates a new layer when you paste an image.
    You can then move it around independently of what you pasted it over via the Move (4 arrows) tool.
    -Noel

  • How to :Migration from existing 595 into new 595 in RAC?

    Hi all,
    This is the bit complicated task for me(i.e) first let me explain our environment
    We are having 595 two instances (RAC) and 8300 is our storage due to the position we are not able to enhance the memory and CPU in this existing 595 Server.So what we are planning to make another 595 servers with some high configuration?
    Since this is new area for me dont know any idea of how to migrate these into new 595 Servers.
    fy.i storage will not get any change it will be as it is.
    I need any docs or anyone pls share their ideas and steps how they did(suppose if anyone did this already)
    Waiting For your reply.
    Thanks & Regards
    M.Murali..

    If your objective is to replace the exiting 595's with new one's then follow the steps below :-
    1. configure both the new servers (595) for RAC installation - follow the pre-install steps required for installing clusterware etc. e.g. storage, network, ssh etc..
    2. add both the new servers as a "node3" and "node4" into the existing 2-node cluster - follow the "node add" procedure in the documentation
    3. turn-off the first 2 nodes on old servers (node1 and node2)
    4. test your application with only the nodes...
    5. remove the old nodes using "node delete" procedure given in the documentation
    reference - http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/adddelunix.htm#BEICADHD
    - Siba
    http://dbathoughts.blogspot.com

  • How to migrate existing OID user to new OID

    Hi all,
    How do i migrate all existing OID username to new OID server?
    Do i also need to migrate their password?
    Assume i'm using oracle database version 10.2.0.2.0 and how to i know which Oracle Application Server and OID version are certify to Oracle Database version 10.2.0.2.0. Please also let's me know where i can find more detail about this.
    Thanks in advance,
    Kevin

    Kevin,
    export/import can be done using ldifwrite/bulkload see Backup and Restoration of a Directory (http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b15991/backup_restore.htm#i1006559)
    or use ldapsearch/ldapadd
    It's up to you to export/import the userpassword. If you want to force them to create a new password using the new server don't import the password.
    w.r.t. certification you'll need to check the certification matrix found at the bottom of the download section of respective product. e.g. Oracle Application Server 10g R3 (10.1.4) contains OID 10.1.4 here you'll find the link to the certification matrix.
    http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html
    or you search for certification and the product version number
    Using a pre-existing DB with OID requires to use RepCA to create the metadata repository into this existing DB before you can point the Oracle Installer during installation to use the then existing MetaData Repository.
    RepCA has dependencies on the DB version to be used. See Oracle Application Server Metadata Repository Creation Assistant Documentation
    http://download-west.oracle.com/docs/cd/B28196_01/getstart.htm
    regards,
    --Olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to import existing projects into JDeveloper 11g

    I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.

    The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
    You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
    And also set the correct JARs/Libraries in the project properties.
    You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
    This how-to might help you with your migration:
    http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

  • Trouble importing pre-existing videos on my computer into iTunes?

    I'm having trouble importing pre-existing videos on my computer into my iTunes library? For example, I've tried adding a home video and opening it with iTunes, etc, and no error comes up or anything, it just doesn't show up in my iTunes library, not in the music, TV, Movies, Podcasts or Radio. What is the problem, does the video need to be converted to a suitable format? If so, what is this and how do I do this? I'm a new iTunes and iPod user so I would really appreciate any solutions or advice to this problem.

    ARG!! me too! I have Widnows Vista as well!! PLEASE!!!! if you EVER find out how to fix this... tell me! I have a video I downloaded from You Tube and it's in the ".flv" format! Apple reads .MP4 along with many others... but this might be a type it doesn't support! so if you ever found out how to fix this.... TELL MEEEE!!!!

  • TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

    After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

    See Pondini's  Transferring files from one User Account to another, for starters

Maybe you are looking for