How to migrate from Win XP to Win 8? Folders are different.

I installed Thunderbird on Win 8 and it created not one but two trees of folders. It seems I should divide up the contents of my XP Application Data\Thunderbird folders and put them under the Win 8 tree
but which XP files go where?

Hi,
You asked your question in the Firefox Support forum. I'll be moving it to the Thunderbird support forum so the Thunderbird contributors can assist you.

Similar Messages

HT1444 how to migrate from yosemite beta to full vesion

Hi
how to migrate from yosemite beta to full vesion

When I look in "about this mac" - it says Yosemite 10.10. Do I really need to download it again?
I found on a blog that someone contacted the Apple service:
“simply install the final version of the software you are testing when it appears in Software Update” – that means the final version of the beta software you are given to test is what will be made public. So we’re on the same build as what is now in the App Store.
My compute OSX is 10.10 but build is (14A388b) while some say that app store version is (build 14A389).
Does it really make a difference? If I don't download it will it continue to update?

When migrating from Bo6.5 to Bo4.0 what are the issues we will face?

Hi all,
When migrating from Bo6.5 to Bo4.0 what are the issues may come?
Thanks,
Hari.

Hi,
first of all you cant direnctly migrate from BO 6.5 to BI4. You have to migrate prior from BO 6.5 to XI 3.1 and afterwards to BI4.
This is a huge step cause BO 6.5 is a very legace version. You will face a lot of issues with the Security. You have to totally re- design it. You will also face issues with BCA Jobs. Also here you have to do a complete re- design. If you only use Full Client Reports you have to convert them to WebI in XI 3.1 prior to migrating them to BI4 cause with BI4 the support of DeskI has been stopped.
Maybe you consider to consult the SAP Consulting devision. This kind of Migration will be challenging.
Regards
-Seb.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

A couple of suggestions that may help:
- Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
- You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left.

Migration from Win/bootcamp to OSX Lion

I'm trying to migrate from a Windows installation running in BootCamp on an iMac (old) to a new iMac running Lion. NO - I'm not trying to migrate BootCamp -> BootCamp, but from Windows to OSX.
The old iMac is running WinXP SP3. The Migration Assistant runs just fine, trying to listen to incoming requests.
The Migration Assistant on the new iMac quickly finds the other machine and displays the key for linking them. The MA on the Windows/BootCamp end never seem to get the request and just keeps on listening.
I've tried them on FireWire networking, on Ethernet to Ethernet and on the same WiFi network. Nothing works.
Is this a problem because the other "PC" is an iMac? The icon that comes up in the MA has the "wintel box" icon, not an iMac icon, as if it is detecting that it is a PC/Windows system.

Olivier: I think the question here is more of how do I take all my enhancements/configuration from IC WIN to IC webclient, and the answer is you have to do it manually.
Manie: I suggest you do a broad search on this forum as there are several threads on the "migration" topic. You can even use the word migration as the search criteria in this forum.
In addition you might want to post a new more specific question on a particular conversion area, after searching of course. This is due to the fact that all landscapes are unique and we dont' know what you did with your system and what it might require in order for your functionality in the IC winclient to be present in the IC webclient.
At this point I'm going to put my moderator hat and lock this thread as it is way too vague and the answers can be found in a search of the forum.
Take care,
Stephen

OS/DB migration from Win/MS SQL TO IBM i

Here is a novel situation. Our implementation partner wants us to install there pre-configured ECC 6.0 EHP6 system. However they have a win/MS SQL system and we have a IBM i system. We have considered trying scc7/scc8 client export/import but we are not sure this is going to work. Looks like our last option is to do a fully fledged OS/DB migration from the win/sql to our IBM i.
Has anyone done this before? Any idea on the level of complexity? How long we should reasonably allow for the process?
Thanks
Matthew Milne

Hi Matt,
nice to hear from you ;-))
As they have doen in their system ABAPs and other repository changes, there is no chance with client copy etc.
The only useful way is a full OS/DB migration.
In this case, it makes it even simpler for you ;-)
They will do an export with SAPinst towards iSeries.
You will import this export (with a migration key) on iSeries - works 99% as an installation - as they want the system in the SAME way as they do have, you even do not need to install support packs at the end - so you can say: this way makes it easier for you ;-))
You can contact me, then we can discuss in detail (that is the way, that I always prefer to install new customers ...)
Regards
Volker Gueldenpfennig, consolut

After applying Hotfix 2910552,while doing Migration from Win XP to Win 8.1 got Error 800700C1

Hi,
I have two SCCM Lab. Both have same configuration and hotfix(2910552) installed.
I am doing hardlink migration from Windows XP to Windows 8.1.
In one of the lab migration from XP to win 8.1 have successfully implemented after applying the hotfix 2910552,and then after updating the Boot image. But i am getting issue while doing the same on my second lab. The error in log file is
Command line execution failed(0x800700C1)
Failed to install boot image,is not a valid win32 application
Failed to reboot the system(0x800700C1)
Thanks
Pallavi

Thank you for sharing the solution.
If your question was resolved/answered, you should mark the thread as "answered".
Then you should make e new thread/question for the new error you get. This will make it alot easier for other users, modetrators and Microsoft to help you. It will also make it much eaiser for othe people with the same issue to search the forums.
Thank you.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Unable To Sync After Migrating From Win XP(32 bit) to Win 7(64bit)

I received a new PC, dual core platform, for XMAS. However, I received a Com 1 port failure when performing a Hot Synch to upload my PD(,M500) data to Palm Desktop on the new PC. Palm tech support said there is no USB driver available for the 64 bit OS. Does anyone have a 3rd party USB driver, or any other suggestions to allow me to do a Hot Synch on my new PC.
Thx,
Ed
Post relates to: Palm m500

Originally Posted by mystico2
Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
any help?
Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
Hope it works for you!

How to migrate from exchange 2007 to 2013 step by step tutorials please

Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
Thanks

Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way.

How to Migrate from SAP BO XI 3.1 system to SAP BI 4.1

Hello Gurus,
I got a new project and I have to start Upgrade and Migration from BO XIR3.1 to BI 4.1. Please help me out here. More detail are given below. Appreciated in advance.
1.1 Technical Scope
Installation of only a production SAP BI 4.1 environment.
Repository is currently on DB2 but will be on SQL Server for the BI 4.1 implementation.
All VMware machines: The new architecture calls for 12 VM servers.
Row-level Security in the universe for authorization of content and Enterprise for Authentication (no SSO). Matrix security model with custom level groups which gives Basic, Intermediate, and Advanced level users to pre-defined folders and content.
Migrate content (objects, universe and instances) from SAP BO XI 3.1 to SAP BO BI 4.1 for the technical upgrade, the details are below:
Universes will stay in the UNV format and will not be converted to UNX.
Only WebI Documents
All Controlled Folders - (~5600 documents)
174 Total objects in Public Documents folders (All documents to upgrade & remediate)
5,433 Total WebI reports in Corporate and other folders (All documents to upgrade, & remediate)
User Folders – (~6,000 documents)
6000 + Webi documents accessed in 2013 ( All 6000 + documents to upgrade, NO remediation)
Inbox – None will migrate
Total Documents to remediate: up to 5,607
Migrate all universes and connections
Migrate all Xcelsius and agnostic documents with no remediation.
The estimated report count for remediation by complexity, Low-1525, Medium-150 and High-50.
Assumes a 10% report remediation effort described earlier sections
Report remediation: should it exceed the base assumptions made in this document, will be implemented as a Change Order. Effort for such change will be mutually agreed between parties. Price to project is determined using this effort and blended rates.
Testing:
Conduct planning and inventory analysis; Reusable templates for Migration Plan, Validation.
Perform migration
Use the Right Sized Testing framework to plan and conduct testing
Use the automated Reports Compare tools to compare large volumes of excel / xml data
Templates based remediation– ensures quality control
Thanking you best regards.
AK.
Message was edited by: Simone Caneparo
reduced title length

Hello Mark,
Thanks for your help. Appreciated.
Do you know or some one know, how to create at report for Audit purpose of BO 3.1 Universes's Connection, Database type, Network Layer and so on... I want to pull all info in to Webi report which are you seeing in the pictures.
Please see the attached file.

How to migrate from a standard store setup in a splitted store (msg - idx) setup

How can I migrate from a standard store setup in a splitted setup described in
https://wikis.oracle.com/display/CommSuite/Best+Practices+for+Messaging+Server+and+ZFS
can a 'reconstruct' run do the migration or have I do a
imsbackup - imsrestore ?

If your new setup would use the same filesystem layout as the old one (i.e. directory paths to the files would be the same when your migration is complete) you can just copy the existing store into the new structure, rename the old store directory into some other name, and mount the new hierarchy instead of it (zfs set mountpoint=...). The CommSuite Wiki also includes pages on more complex migrations, such as splitting the user populace into several stores (on different storage) and/or separate mailhosts. That generally requires that you lock the user in LDAP (perhaps deferring his incoming mail for later processing into the new location), migrate his mailbox, rewrite the pointers from LDAP, reenable account. The devil is in the details, for both methods. For the latter, see Wiki; for the former I'll elaborate a bit here
1) To avoid any surprises, you should stop the messaging services before making the filesystem switch, finalize the data migration (probably with prepared data already mostly correct in the new hierarchy before you shut down the server, just resync'ing the recent changes into new structure), make the switch and reenable the server. If this is a lightly-used server which can tolerate some downtime - good for you If it is a production server, you should schedule some time when it is not very used so you can shut it down, and try to be fast - so perhaps practice on a test system or a clone first.
I'd strongly recommend taking this adventure in small reversible steps, using snapshots and backups, and renaming old files and directories instead of removing them - until you're sure it all works, at least.
2) If your current setup already includes a message store on ZFS, and it is large enough for size to be a problem, you can save some time and space by tricks that lead to direct re-use of existing files as if they are the dataset with a prepopulated message store.
* If this is a single dataset with lots of irrelevant data (i.e. one dataset for the messaging local zone root with everything in it, from OS to mailboxes) you can try zfs-cloning a snapshot of the existing filesystem and moving the message files to that clone's root (eradicating all irrelevant directories and files on the clone). Likewise, you'd remove the mailbox files on the original system (when the time is right, and after sync-ing).
* If this is already a dedicated store dataset which contains the directories like dbdata/ mboxlist/ partition/ session/ and which you want to split further to store just some files (indices, databases) separately, you might find it easier to just make new filesystem datasets with proper recordsizes and relocate these files there, and move the partition/primary to the remaining dataset's root, as above. In our setups, the other directories only take up a few megabytes and are not worth the hassle of cloning - which you can also do for larger setups (i.e. make 4 clones and make different data at each one's root). Either way, when you're done, you can and should make sure that these datasets can mount properly into the hierarchy, yielding the pathnames you need.
3) You might also look into separating the various log-file directories into datasets, perhaps with gzip-9 compression. In fact, to reduce needed IOPS and disk space at expense of available CPU-time, you might use lightweight compression (lzjb) on all messaging data, and gzip on WORM data sets - local zone, but not global OS, roots; logs; etc. Structured databases might better be left without compression, especially if you use reduced record sizes - they might just not compress enough to make a difference, just burning CPU cycles. Though you could look into "zle" compression which would eliminate strings of null bytes only - there's lots of these in fresh database files.
4) If you need to recompress the data as suggested in point (3), or if you migrate from some other storage to ZFS, rsync may be your friend (at least, if your systems don't rely on ZFS/NFSv4 ACLs - in that case you're limited to Solaris tar or cpio, or perhaps to very recent rsync versions which claim ACL support). Namely, I'd suggest "rsync -acvPHK --delete-after $SRC/ $DST/" with maybe some more flags added for your needs. This would retain the hardlink structure which Messaging server uses a lot, and with "-c" it verifies file contents to make sure you've copied everything over (i.e. if a file changes without touching the timestamp).
Also, if you were busy preparing the new data hierarchy with a running server, you'd need to rsync old data to new while the services are down. Note that reading and comparing the two structures can take considerable time - translating to downtime for the services.
Note that if you migrate from ZFS to ZFS (splitting as described in (2)), you might benefit from "zfs diff" if your ZFS version supports it - this *should* report all ofjects that changes since the named snapshot, and you can try to parse and feed this to rsync or some other migration tool.
Hope this helps and you don't nuke your system,
//Jim Klimov

How to migrate from Oracle 7.3.2 to Oracle 9i (SE)?

Hi there,
Can I have some advise on the migration of Oracle Database
version 7.3.2 to Oracle 9i (SE)?
How do I do that? Any document?
Thanks in advance.
Reagrds,
Jacky

I don't have any documents, but this would be my "best guess".
1) patch from 7.3.2 to 7.3.4 (Oracle 8i upgrade I believe only
supports oracle 7.3.4 upwards)
2) Migrate from 7.3.4 to 8.1.7
3) Migrate from 8.1.7 to 9.0.X
I'm not sure what paths the 9i migration path supports, but I'd
doubt they go back to Oracle 7

How to migrate from ascii to unicode (MaxDB 7.5)? loadercli: ERR -25347

Hi,
I use MaxDB 7.5.00.26. (Ok, I know that I should switch to 7.6, however, it is not possilble for some customer restriction for now, but should be possible quite soon).
We'd like to migrate a db from ascii to unicode. Based on the infos in the thread "Error at copying database using dumps via loadercli: error -25364" I tried the following:
Export sourcedb
1. Export catalog and data
C:\> loadercli -d db_asc -u dba,dba
loadercli> export db catalog outstream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> export db data outstream file 'C:\tmp1\20080702b_dbAsc.data' pages
OK
loadercli> exit
Import targetdb
1. Create a new empty DB with '_UNICODE=yes'
2. Set 'columncompression' to 'no'
C:\> dbmcli -d db_uni -u dba,dba param_directput columncompression no
ERR
-24979,ERR_XPNOTFOUND: parameter not found
Couldn't find this parameter e.g. in dbmgui (parameters general, extended and support)
3. Import catalog and data
C:\> loadercli -d db_uni -u dba,dba
loadercli> import db catalog instream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> import db data instream file 'C:\tmp1\20080702b_dbAsc.data' pages
ERR -25347
Encoding type of source and target database do not match: source = ASCII, target
= UNICODE.
loadercli> exit
What is wrong? Is a migration from ascii to unicode to be done somehow else?
Can I migrate a db from 7.5.00.26 to 7.6.03.15 in the same way or should it be done in another way.
It would be greate if you point me to a post etc. where these two migrations are explained in detail.
Thanks in advance - kind regards
Michael

Hi,
I can neither find "USEUNICODECOLUMNCOMPRESSION" nor "COLUMNCOMPRESSION". Could it be that there do exist from MaxDB version 7.6 on and not in 7.5?
Kind regards,
Michael
The complete parameter list (created by "dbmcli -d db_uni -u dbm,dbm param_directgetall > maxdb_params.txt") is:
OK
KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
INSTANCE_TYPE                         OLTP
MCOD                                  NO
RESTART_SHUTDOWN                      MANUAL
_SERVERDB_FOR_SAP                     YES
_UNICODE                              YES
DEFAULT_CODE                          ASCII
DATE_TIME_FORMAT                      INTERNAL
CONTROLUSERID                         DBM
CONTROLPASSWORD
MAXLOGVOLUMES                         2
MAXDATAVOLUMES                        11
LOG_VOLUME_NAME_001                   LOG_001
LOG_VOLUME_TYPE_001                   F
LOG_VOLUME_SIZE_001                   131072
DATA_VOLUME_NAME_0001                 DAT_0001
DATA_VOLUME_TYPE_0001                 F
DATA_VOLUME_SIZE_0001                 262144
DATA_VOLUME_MODE_0001                 NORMAL
DATA_VOLUME_GROUPS                    1
LOG_BACKUP_TO_PIPE                    NO
MAXBACKUPDEVS                         2
BACKUP_BLOCK_CNT                      8
LOG_MIRRORED                          NO
MAXVOLUMES                            14
_MULT_IO_BLOCK_CNT                    4
_DELAY_LOGWRITER                      0
LOG_IO_QUEUE                          50
_RESTART_TIME                         600
MAXCPU                                1
MAXUSERTASKS                          50
_TRANS_RGNS                           8
_TAB_RGNS                             8
_OMS_REGIONS                          0
_OMS_RGNS                             25
OMS_HEAP_LIMIT                        0
OMS_HEAP_COUNT                        1
OMS_HEAP_BLOCKSIZE                    10000
OMS_HEAP_THRESHOLD                    100
OMS_VERS_THRESHOLD                    2097152
HEAP_CHECK_LEVEL                      0
_ROW_RGNS                             8
_MIN_SERVER_DESC                      16
MAXSERVERTASKS                        21
_MAXTRANS                             292
MAXLOCKS                              2920
_LOCK_SUPPLY_BLOCK                    100
DEADLOCK_DETECTION                    4
SESSION_TIMEOUT                       900
OMS_STREAM_TIMEOUT                    30
REQUEST_TIMEOUT                       5000
_USE_ASYNC_IO                         YES
_IOPROCS_PER_DEV                      1
_IOPROCS_FOR_PRIO                     1
_USE_IOPROCS_ONLY                     NO
_IOPROCS_SWITCH                       2
LRU_FOR_SCAN                          NO
_PAGE_SIZE                            8192
_PACKET_SIZE                          36864
_MINREPLY_SIZE                        4096
_MBLOCK_DATA_SIZE                     32768
_MBLOCK_QUAL_SIZE                     16384
_MBLOCK_STACK_SIZE                    16384
_MBLOCK_STRAT_SIZE                    8192
_WORKSTACK_SIZE                       8192
_WORKDATA_SIZE                        8192
_CAT_CACHE_MINSIZE                    262144
CAT_CACHE_SUPPLY                      3264
INIT_ALLOCATORSIZE                    221184
ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
_TASKCLUSTER_01                       tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02                       ti,100*dw;30000*us;
_TASKCLUSTER_03                       compress
_MP_RGN_QUEUE                         YES
_MP_RGN_DIRTY_READ                    NO
_MP_RGN_BUSY_WAIT                     NO
_MP_DISP_LOOPS                        1
_MP_DISP_PRIO                         NO
XP_MP_RGN_LOOP                        0
MP_RGN_LOOP                           0
_MP_RGN_PRIO                          NO
MAXRGN_REQUEST                        300
_PRIO_BASE_U2U                        100
_PRIO_BASE_IOC                        80
_PRIO_BASE_RAV                        80
_PRIO_BASE_REX                        40
_PRIO_BASE_COM                        10
_PRIO_FACTOR                          80
_DELAY_COMMIT                         NO
_SVP_1_CONV_FLUSH                     NO
_MAXGARBAGE_COLL                      0
_MAXTASK_STACK                        1024
MAX_SERVERTASK_STACK                  100
MAX_SPECIALTASK_STACK                 100
_DW_IO_AREA_SIZE                      50
_DW_IO_AREA_FLUSH                     50
FBM_VOLUME_COMPRESSION                50
FBM_VOLUME_BALANCE                    10
_FBM_LOW_IO_RATE                      10
CACHE_SIZE                            10000
_DW_LRU_TAIL_FLUSH                    25
XP_DATA_CACHE_RGNS                    0
_DATA_CACHE_RGNS                      8
XP_CONVERTER_REGIONS                  0
CONVERTER_REGIONS                     8
XP_MAXPAGER                           0
MAXPAGER                              11
SEQUENCE_CACHE                        1
_IDXFILE_LIST_SIZE                    2048
_SERVER_DESC_CACHE                    74
_SERVER_CMD_CACHE                     22
VOLUMENO_BIT_COUNT                    8
OPTIM_MAX_MERGE                       500
OPTIM_INV_ONLY                        YES
OPTIM_CACHE                           NO
OPTIM_JOIN_FETCH                      0
JOIN_SEARCH_LEVEL                     0
JOIN_MAXTAB_LEVEL4                    16
JOIN_MAXTAB_LEVEL9                    5
_READAHEAD_BLOBS                      25
RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_T3
_KERNELDIAGFILE                       knldiag
KERNELDIAGSIZE                        800
_EVENTFILE                            knldiag.evt
_EVENTSIZE                            0
_MAXEVENTTASKS                        1
_MAXEVENTS                            100
_KERNELTRACEFILE                      knltrace
TRACE_PAGES_TI                        2
TRACE_PAGES_GC                        0
TRACE_PAGES_LW                        5
TRACE_PAGES_PG                        3
TRACE_PAGES_US                        10
TRACE_PAGES_UT                        5
TRACE_PAGES_SV                        5
TRACE_PAGES_EV                        2
TRACE_PAGES_BUP                       0
KERNELTRACESIZE                       653
EXTERNAL_DUMP_REQUEST                 NO
_AK_DUMP_ALLOWED                      YES
_KERNELDUMPFILE                       knldump
_RTEDUMPFILE                          rtedump
_UTILITY_PROTFILE                     dbm.utl
UTILITY_PROTSIZE                      100
_BACKUP_HISTFILE                      dbm.knl
_BACKUP_MED_DEF                       dbm.mdf
_MAX_MESSAGE_FILES                    0
_EVENT_ALIVE_CYCLE                    0
_SHAREDDYNDATA                        10280
_SHAREDDYNPOOL                        3658
USE_MEM_ENHANCE                       NO
MEM_ENHANCE_LIMIT                     0
__PARAM_CHANGED___                    0
__PARAM_VERIFIED__                    2008-07-02 21:10:19
DIAG_HISTORY_NUM                      2
DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_T3\DIAGHISTORY
_DIAG_SEM                             1
SHOW_MAX_STACK_USE                    NO
LOG_SEGMENT_SIZE                      43690
SUPPRESS_CORE                         YES
FORMATTING_MODE                       PARALLEL
FORMAT_DATAVOLUME                     YES
HIRES_TIMER_TYPE                      CPU
LOAD_BALANCING_CHK                    0
LOAD_BALANCING_DIF                    10
LOAD_BALANCING_EQ                     5
HS_STORAGE_DLL                        libhsscopy
HS_SYNC_INTERVAL                      50
USE_OPEN_DIRECT                       NO
SYMBOL_DEMANGLING                     NO
EXPAND_COM_TRACE                      NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC      YES
OPTIMIZE_JOIN_PARALLEL_SERVERS        0
OPTIMIZE_JOIN_OPERATOR_SORT           YES
OPTIMIZE_JOIN_OUTER                   YES
JOIN_OPERATOR_IMPLEMENTATION          YES
JOIN_TABLEBUFFER                      128
OPTIMIZE_FETCH_REVERSE                YES
SET_VOLUME_LOCK                       YES
SHAREDSQL                             NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
SHAREDSQL_COMMANDCACHESIZE            32768
MEMORY_ALLOCATION_LIMIT               0
USE_SYSTEM_PAGE_CACHE                 YES
USE_COROUTINES                        YES
MIN_RETENTION_TIME                    60
MAX_RETENTION_TIME                    480
MAX_SINGLE_HASHTABLE_SIZE             512
MAX_HASHTABLE_MEMORY                  5120
HASHED_RESULTSET                      NO
HASHED_RESULTSET_CACHESIZE            262144
AUTO_RECREATE_BAD_INDEXES             NO
LOCAL_REDO_LOG_BUFFER_SIZE            0
FORBID_LOAD_BALANCING                 NO

How to migrate from oracle forms 6i....

Hi......
i'm currently using Forms 6i having abt 150 forms nad 2oo reports, now i want to migrate all my forms and reports to oracle 10g/11i.
Which will be the better option to migrate 10g/11i???
which will be easier to migrate 10g/11i ??
Is there any complication in migrating from 6i to 10g/11i??
Will there be any dataloss if i migrate ??
can i install oracle forms and reports 6i ,10g and 11i in single system ??
thanks in Advance,
Regards,
santosh.Minupurey

Are you currently deployed on the web or as c/s. Generally speaking for upgrading Forms its a case of open in the builder, regenerate and run. For c/s to web there may be some extra steps to do but generally speaking most Forms will run out of the box.
CHeck out otn.oracle.com/formsupgrade
There is also a batch option to help you and there are of course Oracle partners who can help as well.
Regards
Grant

How to migrate from sql server to oracle

Hi ,
My requirement is we are planning to migrate the sql server data to oracle.
what is the way to do migration from sql server to oracle. Please let me know if any tools are there for migration.Previous we used sql developer( which is provided by oracle i.e. freeware )
tool but it was created only table structures not ported any data.

Hi,
Oracle sql developer is a great tool for migration from sql server to oracle..
Refer the link,
http://www.oracle.com/technetwork/database/migration/sqlserver-095136.html

How to migrate from Win XP to Win 8? Folders are different.

Similar Messages

Maybe you are looking for