How to migrate soa 11g into osb11 g

how to migrate soa 11g into osb11 g

http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
In a forum of volunteers using 'urgently' is considered very rude.
Please edit your post and remove it, and do not use it in any of your future posts.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

How to migrate BPM 11g server to another BPM 11g server

Hi All,
There is no change on BPM version (BPMN Editor 11.1.1.3.0.6.84 )
just simply a physical migrate, changed application server, DB and server domain/IP
Now we met questions when migrate DB date, there are four schemas DEV_MDS、DEV_SOAINFRA、DEV_ORABAM、DEV_ORASDPM, cannot used including install config settings, could not be used any more, could not be started.
Is there any guide of how to migrate just user data please?
Thanks for any help!
Regards,
Katherine

Migration of environment should really be done through backup tools that ensure a consistent point-in-time view of the data. We recently had a need to use import/export for an environment. I'll post those notes here hopefully save some time if you have to use this approach. But I'll emphasize again that a backup/restore model is the better way to go.
What we did
We took an environment that had a small set of BPM processes and exported the data from the three core schemas.
•     PS2_MDS
•     PS2_SOAINFRA
•     PS2_ORASDPM
We then loaded that data into another domain, started the server, and interacted with the composites that had originally been deployed in another domain.
What we didn’t do
•     Export complex composites. We didn’t have access to things like AIA applications
•     Export large amounts of data
•     Test a broad set of features. We did use Workspace to create roles, view dashboard, and interact with task lists.
What we learned
We believe this confirmed the basic assumption that data can be exported from one BPM/SOA environment, then loaded and run in another environment. However the issues around user privileges, starting queues, etc, highlight the need to test the process in a broader context.
Tools Used
Data Pump
Data Pump is an import/export tool provided by Oracle. A summary of features can be found at:
http://wiki.oracle.com/page/Data+Pump+Export+%28expdp%29+and+Data+Pump+Import%28impdp%29
SQL*Plus
Used to run scripts
Setup
Create Users
The data pump export will include privilege information in the export. And the data pump import will create users in the target database (assuming sufficient privileges for the user running the import). However we found that some roles related to AQ were not granted during the import. To resolve that issue we created scripts to pre-create the schema users and grant required privileges in the target environment.
TODO:
1.     Review the required privileges to see if there are data pump options that would resolve this
2.     Verify that there are no additional privileges needed by applications in the target integration environment.
Create Output Directory
Data Pump needs to have access to the file system from the database.
Make sure that the output directory is writable by the DB process.
From SQL*Plus:
create directory dbexport as '/scratch/ dbexport';
grant read,write on directory dbexport to system;
Export Data For Selected Schemas
The Data Pump tool supports providing a list of schemas to export as part of a single operation. In this test case we exported the following core BPM schemas to a single file. The commands are in the do_exp.sh script.
•     PS2_MDS
•     PS2_SOAINFRA
•     PS2_ORASDPM
TODO:
1.     Verify space required for the target database to ensure that there is sufficient space to export the data.
Import Data into Target Schemas
Data Pump supports mapping schema names and table spaces as part of the import specification. In this case we used the same Oracle instance, so the schemas were mapped to new names. The PS2 prefix was mapped to XYZ.
Note that the OID transform property is required to avoid conflicts with existing object Identifiers.
impdp system/welcome1 DIRECTORY=dbexport DUMPFILE=bpm.dmp transform=oid:n \
REMAP_TABLESPACE=PS2_MDS:XYZ_MDS \
REMAP_TABLESPACE=PS2_SOAINFRA:XYZ_SOAINFRA \
REMAP_TABLESPACE=PS2_IAS_ORASDPM:XYZ_IAS_ORASDPM \
REMAP_SCHEMA=PS2_MDS:XYZ_MDS \
REMAP_SCHEMA=PS2_SOAINFRA:XYZ_SOAINFRA \
REMAP_SCHEMA=PS2_ORASDPM:XYZ_ORASDPM \
TODO:
1.     Check the log for errors. The only errors we saw were related to trying to build stats on empty indexes.
2.     Identify any other schemas being used
3.     Verify if any other transform operators are needed
Post Import
Start Queues
SOA infrastructure makes use of queues in the DB server. While the queue structures were created, they were not started as part of the import. The start_queues.sql script starts the queues.
TODO:
1.     Verify if there are any other queues that need to be started/configured
2.     Verify if there are any other Stream/Queuing configuration tasks needed
Update Data Sources on WLS
Assuming an existing installation of SOA, the datasources need to be updated to use the new schemas.
Start Domain and Verify Logs
It’s important to check the admin and managed server logs for errors related to composite instances and MDS operations.
Verify Composite State
Log into EM and ensure that the state of instances is consistent with the prior state.
Verify Application Roles and Role Mappings
Since the composites are loaded from MDS, there will be no deployment to create application roles. If the environment is using LDAP or DB, then the validation is to check the mappings through Workspace. If the old environment used a file store, then you’d have to crate the role mappings through Workspace.
Verify Workspace Operations on Existing Instances
Verify that task list operations and dashboards are functional.

How to migrate existing BPC into an pre-existing BW on HANA

We have BPC 7.x on BW on Oracle.We have a SAP BW 7.3 on HANA, Now we want to migrate this BPC into the BW on HANA which has other content.
How do we do it ?

One more question
We have consolidation . So we cannot use BPC 10.1 unified. We will have to go for 10.1 classic.
Assuming we will go for 10.1 classic are the following steps still relevant ?
1. BPC_HANA_MIGRATE_FROM_10 ( may be FROM_101)
2. Set SPRO paramter ENABLE_ACCLERATOR = Y and ACCELERATOR_ON = Y
My feeling is those are still relevant.
But need your expert opinion.

How to Migrate BSP applications into WDA

Hi,
We have some BSP application,is it possible to migrate BSP application into WDA or we need to

There are no automated translation tools from BSP to WDA. Although similar in structure (both MVC and Unified Renderer based), the technology implementation is very different. BSP uses MVC - and has Model and Controller objects. However these ABAP classes are in no way compatible with what Web Dynpro generates. WDA also has the concept of Context which doesn't exist at all in base BSP (although CRMUI does have a context, this is just a wrapper around the BSP model class and isn't compatible with the WDA context either).
The view becomes even more problematic. Although the HTMLB, XHTMLB, and PHTMLB tag libraries are similar to the standard UI elements in Web Dynpro, the WDA versions are much more advanced. You probably could map most of the properties and tags to WDA, but not everything. However the fact that in BSP you can inject any custom HTML and JavaScript becomes an issue because there is no way to do the same in WDA.
Overall, you should just start from scratch and redesign the application as WDA.

How to migrate my-sql into ORACLE!

I have this database running in my-sql. nOw i want to convert into ORACLE.Can anyone shed light on this please..does sql loader
support this?
Thanks in advance..your help will be much appreciated..
ashish

Do you want to migrate code or data?
If its code you'll probably have to do a manual rewrite. Sometimes there are utilities to convert code from one system to another, but some manual fixes are usually necessary even when these exist.
If its data there are copy utilities. As Satish pointed out you could use SQL*Developer, or possibly Oracle Migration Workbench

How to migrate SQL Cluster into Virtual SQL server or Virtual SQL Cluster

Hello All,
Currently we will be attempting to migrate a SQL cluster of (2 systems) into are virtual enviroment. We have been tracking the system requirements with Vmware Consolidation Tool and IO Meter to make sure our hosts have enough resources to accomidate this. All the metrics coming back looks like it will run just fine virtulized as the cluster was just for failover purposes anyhow and not for performance purproses. With that said a few questions have come up.
1.) What is the best way to virtulize this or to convert it (P2V)
- Should we just create a new Virtual Machine and install the same version of SQL and do a manual migration to the new SQL server and leave it as 1 SQL server with HA
- Or is there a way to P2V this kind of a setup ? if so what are the steps involved?
2.) If a P2V is possible I was under the impression that you will have to use a RAW mapping for the hard disks otherwise the cluster will not work ? Can anyone speak to this? as I'm pretty sure I have clustered windows server 2008 without RAW mapping before but not with SQL

Another quick question. The Vmware SQL Clustering KB article says:
vSphere MSCS Setup Limitations
Before you set up MSCS, review the list of functionality that is not supported for this release, and any
requirements and recommendations that apply to your configuration.
The following environments and functionality are not supported for MSCS setups with this release of vSphere:
n Clustering on iSCSI, FCoE, and NFS disks.
n Mixed environments, such as configurations where one cluster node is running a different version of ESX/
ESXi than another cluster node.
n Use of MSCS in conjunction with VMware Fault Tolerance.
n Migration with VMotion of clustered virtual machines.
n N-Port ID Virtualization (NPIV)
n With native multipathing (NMP), clustering is not supported when the path policy is set to round robin.
n You must use hardware version 7 with ESX/ESXi 4.0.
Can you not do clustering if your shared storage is iSCSI ? or can you not do RAW mapping with it to create the cluster ?

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

How to invoke secure web service from BPEL in SOA 11g

In SOA 11g I have a simple bpel process in which I am invoking a secured webservice as partnerlink. The webservice which is used in bpel process is deployed in weblogic and the SSL port is enabled on weblogic server. The wsdl url starts with "https:\\hostname:port\servicename?wsdl"
But I am getting compilation errors when i compiled the BPEL code
Error(16,65): Load of wsdl "AddressBookManager.wsdl" failed
Error(19,30): Load of wsdl "https://hostname:port/DV900/AddressBookManager?wsdl" failed
Error(35,102): Cannot find Port Type "{http://oracle.e1.bssv.JP010000/}Oracle_E1_SBF_SEI_PkgBldFile_AddressBookManager" for "AddressBookManager" in WSDL Manager
Can anyone please help me out in resolving this.
Thanks,
Shameem banu.

Solution is you need to import the keystore into Jdeveloper jdk first.
keytool -import -alias <name> -file <name>.pem -keystore <name>.jks -storepass <passwd>
All details in <> are your specific keystore,pwd details.
Then go to Jdeveloper/jdev/bin
add the following to
jdev.conf file
AddVMOption -Djavax.net.ssl.trustStore=path_to_keystore\keystorename.jks
AddVMOption -Djavax.net.ssl.trustStorePassword=password
Then you can create partner link for https based wsdl
Good Luck

How to use JKS-based Keystore in Oracle SOA 11g

I am trying to do FTPS on third party remote server(with UNIX OS) using SOA 11g FTP Adapter. I have Installed and Configured vsftpd and generated vsftpd.pem certificate file on remote server.
Followed the steps mentioned in http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#CIABDGCF
In one of the step "Setting Up the Oracle FTP Adapter" walletLocation is required, then I went through steps mentioned in http://download.oracle.com/docs/cd/E17904_01/core.1111/e10105/wallets.htm#CHDGIJDC
Tried to use both 1) JKS Keystore Management 2) Wallet Management
But unable to find both of them in em of Oracle SOA 11g as the steps are not matching.
Can anyone tell me how to use JKS Keystore Management or Wallet Management ?
Many Thanks!!
Regards
Yogesh

Hi Yogesh,
I believe the wallet can be created from the FMW console only if the HTTP server is installed and available. If there is no Oracle HTTP server, please configure one as given under.
[ http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14260/toc.htm | Oracle HTTP Server Installation ]
Reards,
Neeraj Sehgal

How to create JMS Queue in soa 11g?do we need to create jmsuser user in db

Hi All,
We r using SOA 11.1.1.3 version do we get jmsuser user while installing itself. we r unable to see this user. Can anyone suggest how to create a JMS queue in soa 11g.
Thanks,
RR

Hi,
Oracle SOA runs over weblogic application server 10.3.3
If you want to create a JMS queue, then you have to create it on weblogic server. For creating a JMS queue, first of all create a JMS server on weblogic admin console (by default http://localhost:7001/console) (Services --> Messaging --> JMS Servers) and target it to a server/cluster as desired. Now create a JMS module (Services --> Messaging --> JMS Modules) and target it to same server/cluster.
Now create a sub-deployment in JMS Module (Services --> Messaging --> JMS Modules --> Your JMS Module --> Subdeployments tab) and select the JMS server you created initially as a target of this subdeployment.
Now create a connection factory in that JMS module and in advanced targetting select the subdeployment you created. Now create a JMS queue in the same JMS module and in subdeployment select the subdeployment you created.
If you want to access this queue from an application then JMS URL should be like -
jms://hostname:port/connFactoryJNDIName/QueueJNDIName
Regards,
Anuj

How to implement Custom Authentication and Authorization in Oracle SOA 11g

Can anyone please tell me, how to implement Custom Authentication in Oracle SOA 11g ?
Because in Oracle SOA 10.1.3.4 , i have implemented this custom authentication and authorization by implementing BPMAuthenticationService, BPMAuthorizationService, BPMIdentityService to verify againt my database systems.
implementation classes like the mentioned below
1).
public class SampleAuthenticationService extends SampleServiceBase implements BPMAuthenticationService {
2).
public class SampleAuthorizationService extends SampleServiceBase implements BPMAuthorizationService {
3).
public class SampleIdentityService extends SampleServiceBase implements BPMIdentityService {
Please help me to implement the authentication and authorization in Oracle SOA 11g .
thanks in advance

To start with please go through following document
http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_jms.htm
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm
Regards
Arpit

How to integrate JD Ewards EnterpriseOne with BPEL/SOA 11G

Can anyone post steps or docs/link as how to integrate JD Edwards EnterpriseOne business services with BPEL/SOA 11G.
I would highly appreciate if anyone could share their views on integrating business services with bpel-soa10g/11g
Thanks

Google it
http://bit.ly/RkkOkQ

Migrating Oracle WorkFlow Applications to BPEL SOA 11G

Hi Gurus,
I am a SOA developer working on SOA 11g projects , My client has a requirement to migrate the existing Oracle WorkFlow Applications to get migrated to 11G , On Googling i got http://www.oracle.com/technetwork/middleware/ias/owf2bpel-132189.pdf which was much informative , since i have no knowledge of Oracle WorkFlow Product , i am finding it hard to migrate these applications.
It would be great if some one can post a conversion of OWF to Bpel tutorial or direct me to location where i can find some , which would save a lot of time for me .
Thanks in Advance
Vamsi .

Hi,
While configuring the Oracle Apps Adapter, select the database connection, give the JNDI, then the Oracle Applications Module Browser will appear, make sure you select the correct module here (there will be many like Financials..etc). My suggestion would be, ask the EBS experts as under which module will that API be there ?
If you can get to know under what module it will be there, you need to select that module, and look inside it, it should be there under something like concurrent API's. I have implemented the Oracle Apps adapter many times, so even if you dont find the API, first get to know the container module, then you should be good to go. Also in the step of Module Browser, on the top; you have an option of searching for API's like wild card search etc...
Hope this helps,
N

How to Migrate 10g sso integrate with EBS 11.5.10.2 to 11g OAM(oracle access manager) with R12.1.3

How to Migrate 10g sso integrated with EBS 11.5.10.2 to 11g OAM(oracle access manager) with R12.1.3
Os:Linux 64 bit
database:11.2.0.3 Rac

Hi,
You could try working through the EBS -> APEX integration article on the Apex community site (http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf)
Rod West

How to migrate soa 11g into osb11 g

Similar Messages

Maybe you are looking for