How to minimize Remote DBA's Right?

How to minimize Remote DBA's permission for data. I would like to encript data in database user level? Thank you in anticipation.....

In addition to Erland's reply, if the Remote DBA connects as a member of sysadmin server role he/she are able to do anything on the instance.. You have to grant the only rights she/he needs depends on your business requirements.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

How do i get this put right?

I hope this post is in the correct area of the forum as I technically do not have a problem with speed...............but i do
Confusing i know I shall try explain.
I was with another ISP on ADSL max until 2 days ago but I noticed that BT were upgrading my local exchange to 21CN so as I was out of contract with my old ISP i decided to move to BT so that I could get better speeds from the 21CN network that was going into my local exchange. My phone line and Broadband were moved to BT on the 10th December, on that day i went into the sam knows website and checked my exchange to find that the 21CN was now enabled in my exchange...............great i thought, perfect timing............not quite it seems as when i look at my router stats I am on G.992.1 Modulation which to the best of my knowledge is the "up to 8Mb" service.
Could someone with a little more knowledge than me please look at my line stats and confirm what I am thinking please. I appreciate my homehub is only 2 days into its 10 day learning period but from what i can see it is learning the wrong network. If what i think is correct how would i have this put right as I did not leave one up to 8Mb service just to go straight to another. 21CN was my only reason for moving to BT and seems like I am not getting it.....my exchange code is ESKGH so you can check for yourself
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
2 days, 02:54:57
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
12.2 dB / 30.0 dB
Line attenuation (Down/Up):
5.5 dB / 2.0 dB
Output power (Down/Up):
12.0 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 267
CRC Events (Down/Up):
62265 / 111
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
56415 / 66
Error Seconds (Local/Remote):
52568 / 468

thanks seems it is enabled, so do you know what i would have to do?
THE BROADBAND AVAILABILITY CHECKER
Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 2Mbps.
Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 8Mbps; typically the line speed would range between 7Mbps and 8Mbps.
Our test also indicates that your line should be able to have an ADSL2+ broadband service that provides a fixed line speed up to 2Mbps.
Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 17Mbps; typically the line speed would range between 10Mbps and 19.5Mbps. Our test also indicates that your line could support an estimated ADSL 2+ Annex-M broadband upstream line speed of 1.5Mbps and downstream line speed of 17Mbps; typically the downstream speed would range between 10Mbps and 19.5Mbps.
The actual stable line speed supportable will be determined during the first 10 days of use. This speed may change over time, to ensure line stability is maintained.
If you decide to place an order, a further test will be performed to confirm if your line is suitable for the service you wish to purchase.
Thank you for your interest.
Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
Note: If you already have a Broadband service enabled on this line and you want to switch service providers, you will need to contact both your current provider and your new provider to get your service changed over new and existing service provider to have this service transferred.
Also provision of some services may not be allowed due to product withdrawal, please contact your service provider for further details.

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

How do i remote from macbook pro to my iMac desktop?

how do i remote from macbook pro to my iMac desktop?

screenshare. look for your imac in the sidebar of your mbp finder window. right click and choose share screen. or there is an option for it when you click the user. either way, screen share will come up where you can control the desktop of the other computer after you login with the appropriate account.
you'll need to have screen sharing available in system preferences>sharing>screen sharing

How to use remote JMS in websphere5?

I want to use JMS in another server to send message so that I config required jndi in server. When I lookup local JMS jndi(connection factory, queue) it works correctly. But when I lookup remote connectionfactory, it throws 'javax.naming.CommunicationException'. BTW, local configuration is same as JMS server. And I use WSAD 5.1.1 to develop it.
The first question is if I need use JMS server on another server, I should lookup remote queue and JMS connection factory on that server, right?
The second question : If yes, how to obtain remote JMS connection factory? I use WSAD 5.1.1 trail, I don't know is it possible to obtain remote jndi.
The third question : do I need change any configuration for supporting remote JMS client instead of local(same compute, different jvm) environment?
The following is my client code to obtain remote queue:
public class Test {
     public static void main(String[] args) {
          Properties env = new Properties();
          env.put(Context.INITIAL_CONTEXT_FACTORY,
                "com.ibm.websphere.naming.WsnInitialContextFactory");
          env.put(Context.PROVIDER_URL, "corbaloc:iiop:10.240.4.203:2809");
          try {
               Context initialContext = new InitialContext(env);
               Object obj = initialContext.lookup("jms/IPharmQueue1");
          } catch (NamingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
}It works ok when ip is localhost. But it can obtain remote queue or connectionfactory. I tried to lookup other EJB, it also failed.

Actually, I have application in one server and four same server as cluster. But only one server provides JMS service. So my application need to use remote JMS server instead of local server. But in my development environment I can not simulate cluster environment as customer environment. So I try to let my application access remote JMS server in different computer. When two server start up I found my application will get local JMS connection factory and queue instead of remote factory. Even I put IP of another computer in PROVIDER_URL.
I did a application client to test it. The code is above. But it can not lookup remote jndi.
I use WAS5 as server and WSAD 5.1.1 as development IDE.
Is any idea about it?

HOW to Minimize Screen Size in Screen Painter

HI all,
I am developing one module pol program for material transfer.
in that i have to develop one screen like dialog box not like normal screen on which i want to display error.
and after cliking the push button on it i will see the normal screen.
how can i show screen as dialog box. or how to minimize the screen size to look like dialog box.
please do the need ful.
points will be rewarded.
thanks
vinod

hi
good
While calling you will use like this..
Calling a single screen is a special case of embedding a screen sequence. If you want to prevent the called screen from covering the current screen completely, you can use the CALL SCREEN statement with the STARTING AT and ENDING AT options:
CALL SCREEN <scrn>
STARTING AT <X1> <Y1>
ENDING AT <X2> <Y2>.
This calls the screen number <scrn> as a modal dialog box. When the screen is displayed, the screen that had called it is visible but inactive. The STARTING AT and ENDING AT additions specify the top left-hand and bottom right-hand corners of the dialog box respectively. In the screen attributes of screen <scrn>, you must set the Modal dialog box attribute. This defines how the interface elements are positioned on the screen.
thanks
mrutyun^

How to minimize window into the system tray icon

Hi,
I tried to fin how to minimize the application main window into the right down corner (system tray bar) only as an icon cause I don't want to have it on main bar.
Thx for any ideas.
Wenca

I've already done that, some years ago.
Sorry, but I cannot give you the code, cause it has vanished after a few (!!!) system re-installations ;)
But this was the main idea:
- make a jni-dll
- inside the dll, get the handle to the window you want to minimize
- alter that window's properties
It's rather easy, once you've avoided all pitfalls. I'll suggest http://www.codeproject.com , they've certainly some tutorials on minimizing to the system tray.

How to minimize writes to ssd

I know there are some tweaks that make the amount of writes to an ssd dramatically less but I haven't been able to find where I picked that info up the first time. My free space is slowly being eaten away and it's not anything I'm doing! I have a Mac mini with an Intel 520 ssd for the system drive. It works incredibly well, boots up in 14 seconds blah, blah, but like I said there are a ton of mysterious writes being made chewing up my free space. Yes, trim patch is enabled and I'm now running Mavericks.
Thanks in advance for any help!

In addition to Erland's reply, if the Remote DBA connects as a member of sysadmin server role he/she are able to do anything on the instance.. You have to grant the only rights she/he needs depends on your business requirements.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to open remote front panel of vi's within an executable from an executable.

How do I remotely open front panels of subvi's contained within an executable, where both computers just have LabVIEW Real Time loaded (programs are run as executables)? I want to use the Method: Remote Panel Open Connection to Server to make this work. I have been getting error 1032 "VI Server Access Denied". I do not want to use the web page method (connection is too slow when controlling front panel objects and I can not programmatically exit out (release control of vi) of the web page).
Ex.
PC1: Has executable1 using Remote Panel Open Connection to Server Method etc. code inside. This program will make a call to executable2 (on PC2) to open up different vi front panels (within executable2), so the controls can be changed from PC1. I want to be able to make changes to the vi's running on PC2 from PC1.
PC2: Has executable2 containing several subvi's.

Not sure if this is what you are looking for but here is how to launch executables that can interact
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to minimize Final Cut pro with one click?

I know you can minimize windows (canvas, timeline, etc) by pressing Command+M 4 times but how to minimize Final Cut pro with one click?

Hold down the Option key and click the Minimize button on any window, all windows in the app will minimize.
Don't know what or if the reverse of this is - so although it's a one click minimize all windows, I believe you have to re-enlarge them one at a time.
MtD

How can I print in the right hand corner of the paper (no borders)?

How can I print in the right hand corner of the paper (no borders). I have Adobe 7.

Is that elements 7 or photoshop 7? It can make a difference.
What you can do is create a new document that is the size of the paper, then place your document in the new document. You can now align your document to the right side of the page.
Now print.
Borders can have two meanings here. You can add a border to an image such as a stroke for example. The other meaning is the printer has a non-printing area called a border.
In the former there is nothing to do as long as you did not add one. In the latter some printers do have a print to edge option, but it has to be a feature of that printer. It would be located in the print options. If the printer does not have such a feature, there is nothing you can do, short of manually cutting the paper with a paper cutter, scissors, or x-acto knife.

How can i remote a computer outside of my nextwork and has a dynamic IP

How can i remote a computer outside of my nextwork and has a dynamic IP.
I have have mac set up overseas and will need to remote access it from time to time, but the mac has a dynamic IP, is there anyway around for me to access IT.
Have been using "log me in" but its too slow.
Thanks in advance for any assistance

The subject of connecting ARD via the Internet has been covered here many times already (search the forum for "Internet"), but take a look at this web page:
http://www.starklmc.com/ard.htm
It should help, though you may have to refer to your router's documentation for specifics on opening and forward ports in that particular unit.
To get a "static IP" use a service like dyndns.com

How can i run a executable right after a rman job has run?

How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

Hi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi.

How to implement remote blob storage in SharePoint 2013

How to implement remote blob storage in SharePoint 2013

Try below:
http://blogs.technet.com/b/wbaer/archive/2013/05/23/deploying-remote-blob-storage-with-sql-server-2012-alwayson-availability-groups.aspx
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

My Iphone was stolen. How do I remotely wipe it?

My iPhone was stolen. How do I remotely wipe it? Is there anything else I need to do?

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How to minimize Remote DBA's Right?

Similar Messages

Maybe you are looking for