How to mirror 2006 MacBook OS 10.5 using AppleTV wirelessly?

I have a 2006 MacBook Pro (2.16GB Intel Processor) that I need to connect wirelessly to AppleTV. Currently running OS 10.5.8. Any work arounds?

Welcome to the Apple Community.
You may wish to search Bing for alternatives to AirPlay mirroring. I'm not going to suggest any to avoid them being construed as a recommendation, but they shouldn't be difficult to find.

Similar Messages

Am i able to mirror my macbook to the tv using apple tv 2

am i able to mirror my macbook to the tv using apple tv 2

I've been frustrated by the same question since I got my Apple TV a few days ago. I thought that Airfoil would be able to solve the problem - it doesn't. There is a browser extension called ClickToPlay that used to enable that capabiity, but the latest Apple TV firmware broke it. The Mac display will stream to the Apple TV for a few seconds, but then drops out.
My latest attempt was to try Air Display, but that won't connect to my Apple TV. The documentation indicates that it should, since I think the Apple TV is supposed to be an AirPlay enabled device, but Apple seems to have it totally locked up into iTunes. I've seen rumors that Apple is going to incorporate the ability to mirror Mac computer displays some time in the future, so I'm anxiously waiting for that or for some creative developer to figure out how to do it. If anyone sees the solution, please post it.
Thanks,
Randy Brasch

HT201335 How can I airplay mirror my MacBook Pro to my TV set through Apple TV?

I have a macbook pro with Mountain Lion 10.8.2. The airplay symbol appeared on my itunes, but I don.t know how to mirror my screen to my TV using ATV.

http://support.apple.com/kb/HT5404
Macs which support AirPlay mirror

I replaced my hard drive on my late 2006 Macbook Pro. I tried to do a reinstall of Tiger 10.4.5 from my start up disk. I get an error that states "can't install on this computer." HELP

I replaced my hard drive on my late 2006 Macbook Pro. I used the disk utility and erased the drive and formatted it to OSX Journaled . When I tried to install the OS from the start up disks I got the error "Can't install on this computer. I have verified the drive.
I have used Super Duper to copy my old drive to my new drive. But I wanted to do a fresh install. How do I go about this?

Did you do the Super Duper clone before you tried to reinstall the OS? If so, the original install disc is likely earlier than 10.4.11, and that may be why you are getting the message.
When trying to reinstall the OS, did you select the "Archive and Install" option? If not, you might try that. Here's a link that might help:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1103.html
Good luck!

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

How can i deploy macbooks and 802.1x authentication using PEAP/MSChap version 2

How can i deploy macbooks and 802.1x authentication for wireless connectivity using PEAP/MSChap version 2. The Cert is generated by a 2008 Windows CA authority. I am trying to get to join but the MAC doesnt seem to want to accecpt the cert. Can i not validate the cert and still have it join the 802.1x wireless netqwotk? The wireless netwotk is using a Cisco 5508 wireless controller and Cisco 1142 access points. All works fine with Windows devices.

Hi Tarik,
Thanks for your answers,
I've attached my configured AuthZ rules and AuthZ profile for provisioning,
I want the process to be the same for iPhone, Android and Windows.
1) Connect to the SSID
2) Login using your AD credentials PEAP-MS-CHAP-v2
3) Redirect to device registration portal (So I can set a limit of 3 devices per employee)
4) As soon as the client click "register" no more redirects and PERMIT-ALL
I think that I don't need to rely on profiling because In terms of AuthZ policies it should be something like this:
1) if WIRELESS802.1x and PEAP-MS-CHAPV2 and BYODREGISTRATION=!YES(Unknown or not reg) then "Redirect to device registration(that is NSP right?)"
2) if WIRELESS802.1x and PEAP-MS-CHAPV2 then PERMIT-ALL(no redirection)
3) everything else = DENY-ALL
But the NSP looks for Client Provisioning policies, so if I don't configure any policy it should Allow Network Access(See attachment photo3.png) but as I said on the post it shows that cannot retrieve the MAC-Address so the client can't register his device and don't have access to the network. (To grant access I've configured provisioning policies, that way the clients can register their devices but they are redirected to google play or are forced to install the profile at iOS and this is what I don't want because it is not necessary)
What screenshoot do you need after the registration? the Auth report?
Thank you very much for your time!

HT204350 When open Macbook air to connect with Appletv, I don't see an icon display on menu bar.

Could you show me how to connect my macbook air 13.3 to Appletv?

iTunes/Preferences/Apple TV and add it there.

How to Change Wi-Fi Channel Used by Wireless Direct on HP Officejet Pro 8600 Premium?

I would like to change the Wi-Fi channel that is used by Wireless Direct between my Lenovo laptop and my HP Officejet Pro 8600 Premium to reduce interference from other nearby users of Ch. 6 in my condo complex. (I am not using a wireless router setup to connect to the printer.)
Is this possible? If so, how?

Ah... ok. You are using the Wireless Direct with the printer. You computer is wireless to channel 6. That is all you can do unless you changed the router's wireless channel which will only automatically switch on your computer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

Look at Target Display Mode:
http://support.apple.com/kb/ph4469
http://support.apple.com/kb/ht3924
Ciao.

How do i mirror my macbook air with apple tv now that i have mountain lion

how do i mirror my macbook air with apple tv now that i have mountain lion

Settings-display-look at the bottom for an airplay menu and select your apple tv

How can I connect an older Realistic stereo mixer to my 2006 Macbook?

I am a musician and producer and just got "LiveWire CMR-210" cords at Guitar Center today. One is gray and the other is red, and the end has a jack that can connect to your headphone jack or line-in on your computer. I also have a Realistic stereo mixer, it's a little bit older, but I'm pretty sure it's supposed to be able to connect to computers. My laptop is a 2006 Macbook running Snow Leopard. I would like to know how to connect my mixer to my Macbook and use it with VirtualDJ and Garageband, and if possible use it in iTunes.
Thank you in advance for your help. I'm new to Macs but I love my Mac so much already after learning how to use them.

Upgrade Office to Office 2011 for OS X. You can download a trial at www.mactopia.com. Old versions of iWork boxed sets can be found searching Amazon, eBay, or Google.
Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

HT201343 When I mirror my macbook pro to my apple tv the only thing that shows up is one video that's on my desktop. How can I watch something that's online on my laptop, on my apple tv?

When I mirror my macbook pro to my apple tv the only thing that shows up is one video that's on my desktop. How can I watch something that's online on my laptop, on my apple tv?

Are you using mirroring or using airplay within iTunes? If you are truly mirroring then you can view anything that is displayed on your computer through Apple Tv
Or provide more info on your issue

HT3231 I have migrated all of my data from my old 2006 MacBook to a new 2011 MacBook Pro. Everything went fine. How to I remove all of my data from the old MacBook so I can give it to my girlfriend to support her iPod? I want to remove everything and star

I have succesfully migrated my data from my 2006 MacBook to a new 2011 MacBook Pro. How do I delete ALL of my personal data from the MacBook so my girlfriend can use it to support iTunes and her iPod?

Order a Snow Leopard 10.6 install disk for $29 from The Apple Store as long as you have at least 1gb of RAM. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

How do you determine early from late 2006 MacBooks?

We need to replace the battery in a 2006 Macbook but don't know whether it's an early 2006 or late 2006. How do we determine this (for this purpose as well as any other purpose?)

Every white or black plastic case MacBooks except the Late 2009 and Mid 2010 Unibodies used the same battery. It's easily removable with a coin to unlock it.
Shut down the computer. Disconnect any cords connected to the computer.
Turn the computer over.
Locate the battery latch on one side of the battery.
Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
Lift the battery out.
Installing the battery:
Place the right side of the battery into the battery compartment at an angle, as shown below.
Gently press the left side of the battery down until it sits flat.
While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.

How to mirror to tv monitor using macbook pro 2012

how to mirror to tv monitor using macbook pro 2012. The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

Howdy there nell a-7,
It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
All AirPlay-enabled devices must be connected to the same Wi-Fi network.
Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices.
Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Here is some additional information about Airplay for Mac:
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Thank you for using Apple Support Communities.
All the best,
Sterling

How to mirror 2006 MacBook OS 10.5 using AppleTV wirelessly?

Similar Messages

Maybe you are looking for