How to mirror and setup independantly

I want to use the two displays in the following ways.
1. Use the display with macbook in clamshell mode, then when open mb to have the mb mirror the display with both displays at their native res. Currently res gets messed up and can't see whole screen on the mb.
2. Use the display with macbook in open mode with screens working independantly ie so i can use safari on one display and word on another at the same time.
If this possible and if so how?
Many thanks in advance,
Jon.

That's helpful thanks. So my understanding of the options is as follows:
1) With mirroring on. Mirrors displays however not at default resolution for macbook display which makes it difficult to use. You can you both displays but actions are mirrored on both. Not very useful.
2) Extended diplay with separate setting for each display that allows you to set each at their default res. I can then set the master screen by dragging the menu bar in the display settings > arrangement tab. This allows you to open applications and separate application windows that can then be dragged to the secondary display. It is not possible however to have the menu bar on both screens.
Is that correct or are there any other setups possible?

Similar Messages

How to install and setup macports for mac os mavericks, for open vpn purpose.

Hi Guys! I'm using OS Mavericks now in my macbook pro, I need help and suggestions regarding open vpn application that i can use for my laptop so that i can access my server in my office even im out of town and country. I found vpn network setup in network preference but i dont know how to setup. also others are suggesting macports for mac but still difficult to analyze and setup. I need to troubleshoot in terminal which i'm not familiar with commands. Please help me guys! Please!

You're going to need to figure out the required settings for the VPN server you're working with, whether you use the standard client or some add-on. That information is a prerequisite for a VPN client; for any VPN client.
If the standard VPN client present in OS X doesn't and cannot be gotten to work, then something like IPSecuritas or the OpenVPN client would be a typical fallback choice, but IPSecuritas is far more flexible — which means far more complex. These clients are available as application downloads; no Brew or MacPorts required.
Is this your server you're connecting into? Or is somebody else controlling it?
If it's your server and thus your VPN server, then you'll have the option to get either the VPN server in the gateway firewall box or the VPN server running in the target system configured to allow the OS X VPN client to work.
If the server is controlled by somebody else, ask them for the settings necessary for the VPN client.
As Barney-15E states, using Brew or MacPorts won't help, unless you're installing the VPN client that way — which would be a little unusual — and you're still going to have to figure out the L2TP / IPSec or PPTP or other settings here, irrespective of how the VPN client gets installed.

How to create and share streaming video?

Hi -
I have finally finished a project in PE8 and I'd like to upload it to my website so that others can stream it.
I have created output in FLV, MOV and MPG formats.
I have uploaded them to my web server.
However, whenever I link to the video, my browser (IE or Firefox) just asks to download or run it.
Then, it tries to download the entire video - this is a problem as the files are up to 1.3gb.
I've tried this:
<html>
<a href="myvideo.flv">CLICK HERE</a>
</html>
and this:
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab" WIDTH="160" HEIGHT="136" >
<PARAM NAME="src" VALUE="myvideo.mov" >
<PARAM NAME="autoplay" VALUE="true" >
<EMBED SRC="myvideo.mov" TYPE="image/x-macpaint"
PLUGINSPAGE="http://www.apple.com/quicktime/download" WIDTH="160" HEIGHT="136" AUTOPLAY="true"></EMBED>
</OBJECT>
and this:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="400" height="400" >
<param name="movie" value="myvideo.flv">
<param name="quality" value="high" >
<param name="LOOP" value="false">
<embed src="myvideo.flv" width="400" height="400" loop="false" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash"></ embed >
</ object >
So, why isn't it streaming?
Is it the video format?
The embedding on the web page?
My server?
Perhaps you can share the details of how you created and setup a streaming video?
Thanks....

You need to embed a player for the file. This will differ by the file type that you choose. I'd probably go with a Flash player, but you have other choices.
I'd post your request for the exact instructions, and HTML code needed, plus tips on optimization to the Muvipix "Community," probably under the "Water Cooler" sub-forum. The Webmaster there, Ron, is an expert in embedded players, as are several other subscribers. I'll bet that you'll get the exact code, with all sorts of useful tweaks, in no time. If Ron suggests another file type and player, listen to him, and not to me. I just deliver the streaming AV files in the exact format that my client asks for. They have their Webmaster use them in their particular page design. My job ends, before your's, now, begins.
Good luck,
Hunt

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

Can anyone tell me how to port forward and setup an XBOX 360 using my Time Capsule??

Xbox 360
When playing the game online, the minimum speed of your network should be 128kbps. The ideal network speed for playing the game online is 768kbps. If you are having a problems with lag check the following:
Network Troubleshooting:
Disable any firewall or security features on your router.
Set port forwarding on your router to the IP address of your Xbox 360. This game uses port 3074 (UDP/TCP). Additionally Xbox LIVE requires ports 80, 53 TCP and 88, 53 UDP.
Place your Xbox 360 into the DMZ of your router.
Disconnect your router and try the game. If it works regularly at this point something about your router may not be completely compatible with the specific needs of this game. Check with your router manufacturer and Microsoft's Xbox Live Connection Issues page for additional steps that may need to be done to resolve the issue you are having. You can also verify that you have an Xbox Live compatible router.
If you are having issues connecting while multiple Xbox 360 consoles are connected on the same network, try forwarding port 3074 (UDP/TCP) for one Xbox 360 and setting the other as DMZ. There is a chance that this may not resolve you issue, if it doesn’t then you may want to consider getting an additional public IP address by contacting your Internet Service Provider and assigning it to one of these two consoles.
NOTE: If setting port forwarding or DMZ helps your connection issue, you may want to assign your Xbox 360 a static IP address within your home network. This can help to ensure that the configurations you made do not need to be done again. You can visit PortForward's Static IP Guide for a detailed guide on how to do this.
NOTE: Many broadband internet modems are coming with routing capabilities built in. Please contact your internet service provider to determine if your internet modem has an integrated router. If it does, they should be able to assist you with the steps above for setting up your router.
Once you have verified that your network setup is not the cause of the issue, try the following:
Try connecting to a different server. Some servers may have other players connected to them that you do not have an optimal connection with. In most games this is accomplished by backing out to the main menu and then selecting multiplayer again. From there you can try connecting to another online game.
Run the Xbox Network Self Test to see how strong your NAT is currently set to. Once the test is completed you will be notified if there is an issue with your connection. If you select "More Info" you will be given information about your NAT type and some steps to resolve any issues with your connection.
Moderate and Strict NAT types may have issues connecting to online matches. You may get the error "Notice - The game session is no longer available." If you do then enabling UPnP, forwarding port 3074, or placing your Xbox in your router's DMZ may resolve this issue. Please consult your router documentation for instructions on how to do this.

ouman88 wrote:
Whoa....this just went way over my head.... I already have 6.1 installed for my Airport Utility.
Read again what I wrote.. 6.1 is the problem.. or part of it.
You need to install the earlier 5.6 version which I have given you explicit instructions to do.
I have done something now and can not connect the XBOX at all now....unless you can provide me step by step directions I may have to call Apple Support.
This will happen over and over.. just press reset and start again.. you need to learn how to do the setup and using 5.6 utility will help you.. as will using ethernet from the computer to the TC.. trying to fix things over wireless is like sitting on a tree branch you are sawing off. As soon as you update you will fall to the ground.
I am not that sure that Apple Support will have any idea.
Do a google search .. you will find most people struggle with this.. Microsoft made the xbox to use upnp with vista specs.. if you use a router without upnp, ie any apple router.. you will have issues.
Have a go at bypassing the problem.. I have no idea if this will work.. I do not use a TC as the main router because much of my network including xbox and ps3 is just a pain.. I use a modem router with upnp. And bridge the TC.. that is the setup I would recommend.
Try this.. once you have installed 5.6 utility.
Get the IP of the XBox and click enable default host.. and put the IP address in there.. this is called DMZ.. all unassigned packets are forwarded to this ip address.. it is like a port forwarding for all ports.
See if it helps.. If it does you will need to lock the xbox address so it doesn't change.. we can get to that.
Tell me what kind of broadband you have and what modem router first.. none of this will work if you have double NAT.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

How to use the mirrored and log shipped secondary database for update or insert operations

Hi,
I am doing a DR Test where I need to test the mirrored and log shipped secondary database but without stopping the mirroring or log shipping procedures. Is there a way to get the data out of mirrored and log shipped database to another database for update
or insert operations?
Database snapshot can be used only for mirrored database but updates cannot be done. Also the secondary database of log shipping cannot used for database snapshot. Any ideas of how this can be implemented?
Thanks,
Preetha

Hmm in this case I think you need Merge Replication otherwise it breaks down the purpose of DR...again in that case..
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

MOVED: What we need - a guide on how to flash bios, setup bios, and raid

This topic has been moved to AMD64 nVidia Based board.
What we need - a guide on how to flash bios, setup bios, and raid

Like How to Flash Bios NVidia 64 & Award Bios
Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
Raid Guide
If any1 wants to re-write /update these please feel free to write up the topic as a new thread thread & if popular we can add a link to the thread.
Volunteers welcome

Diagnostic and setup functions became icons on the screen, how do I fix this?

I deleted skyfire and then all of a sudden the diagnostic and setup functions for the IPad became icons. I don't know if this is a problem and I don't know how to make it go back to normal. Can someone help?

Rjohn324-
First, check Settings-Brightness & Wallpaper to see if the icons are actually embedded in the background.
Then try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

How Are Your Controllers Setup for BYOD/Guest and OEA

I am in the process of building a new wireless network. The network will include BYOD/Guest and OEA for teleworkers using ICE and MobileIron for MDM. In the past I have setup an anchor controller for guest, but for this design I have a cost constraint that prevents me from adding the anchor controller. I know the Cisco SE’s push to include an anchor controller in the DMZ for this design, but I wanted an unbiased opinion from folks who may have a similar design and how your controllers are setup. For this design can I deploy a BYOD/Guest and OEA network without a DMZ controller?
Thanks in advance.
Bret

Hi Bret,
You can use WLC with Cisco ISE.
Here is the full deployment guide:
http://www.cisco.com/image/gif/paws/113476/wireless-byod-ise-00.pdf
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_ISE.html
Hope it helps.
Regards
Dont forget to rate helpful posts

Where and how can I place and setup my airport to reduce EMF exposure?

I want to reduce EMF exposure from the Airport Time Machine which is sitting on my desk right now. Where and how can I place and setup it up?

What role does the TC have in your network?
If you do not want EMF (actually RF), exposure, move it as far as possible away. There is no rules.. but the inverse square law.. if you double the distance the radiation will drop by 4times. So for every double distance you drop RF by another 4times. Far more EMF is coming from the computer than the TC. So you should move that away as well if you are worried about EMF.
Let me also say, as doubtless others will, the RF exposure from TC or any wifi is tiny.
Firstly they do not continuously transmit.. it will pole briefly every few seconds but only will transmit during actual file transfer.
The power output of say a cordless phone is aprox 10x that of the TC. And that is or can be the same microwave freq as wifi or near to.
The mobile phone in your pocket is doing the same thing.
There is no proof that microwave radiation at such minute levels will do anything harmful.
If you have headaches etc which you believe are caused by wireless.. then do not use wireless.. turn it off and cable everything. Shield your house as well.
As a general principle.. shielding is effective.. If for instance you have a 27" imac on your desk.. place the TC on the wall behind the imac.. the metal of the imac will shield you to some extent.. although of course some radiation will bounce from other objects.
Any shielding of the TC will reduce its effective wireless range.. ie you can put the TC in a metal cage.. (look up Faraday Cage) which will stop all radiation.. If you open windows in the cage.. it should only get signal in those directions but it is not a neat easy rule. And obviously I can achieve the same thing by simply turning the wireless off.
The v5 utility has a control of power output on the TC.
This is just the same as distance.
Transmit power is able to be set to 10%, 25% and 50%. At the cost of range of course.
If you run Mountain Lion you will have to use tricks to load it.. but it can be done. Lion you can download it.
http://support.apple.com/kb/DL1482

How can I flip/mirror and image horizontally/vertically in the same programme? Is there a keyboard s

How can I flip/mirror and image horizontally/vertically in the same programme? Is there a keyboard shortcut? Mac, latest version.
Thanks in advance..

Rola.AlGhalib wrote:
…but figured how can an editing software not have the simplest things…? …
Bridge is categorically NOT "editing software". It's just a file browser, no more and no less. Period.
Bridge does not "edit" anything. Bridge doesn't even open anything. It just hands files to the appropriate application, whether this be Adobe Camera Raw, Photoshop, Illustrator, Acrobat, InDesign, or even Microsoft Word.
No, there will most likely never be "an update" for this.

"How are local and state taxes setup/updated when employee's address change

Hi All
I wanted to know "How are local and state taxes setup/updated when employee's address changes . - How is it done in SAP? -
Thanks in Advance

This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

How to mirror and setup independantly

Similar Messages

Maybe you are looking for