How to mix 4:3 and 16:9

I have footage in both 4:3 and 16:9. I captured both on thier own format. Now I want to edit them and have the final movie in a 16:9 ratio.
Both were recorded with standard definition cameras, how do i mix both fotage without affecting the picture quality and if possible avoid too much rendering time.
What are the setting I need for the sequence?
Thanks for all your help!

Post in Final Cut Studio forum.
4:3 footage needs to be enlarged to fill 16:9 frame size.

Similar Messages

ADF Faces & BC: How to mix JSF EL AND conditions

I'm trying to do something like the following on an executable defined within my pageDef:
RefreshCondition="#{processScope.editRecord==false} && ${ adfFacesContext.postback}"
What should be the proper syntax?
Many thanks,
Wes

Resolved.
Found the syntax in another post with a different topic.
Re: ADF Model : Refresh and RefreshCondition on methodIterator and invokeAc
RefreshCondition="#{ (processScope.editRecord) and (!adfFacesContext.postback) }"

How to mix percent sizing and pixel sizing (height)?

My Flex 4 MXML application that has mainly two components: first is a canvas that takes up as much as space as possible (100% - 30px), the other is some buttons and text input fields in the bottom that takes only 30 pixels.
Is there an easy way to do this other than adding an event handler to listen to window resizing?

Thank you. This is very similar to what I have right now - but
apparently the canvas object goes out of bound. I realize this when I
drag the buttom bar, the mouseup/down event also triggers my drag
handler in canvas.
     <s:layout>
          <s:VerticalLayout/>
     </s:layout>
<s:Group width="100%" height="100%">
     <flare:FlareVis id="fvis" backgroundColor="0xffffff" width="100%"
height="100%"> -- this is a canvas object
     </flare:FlareVis>
     <s:VSlider id="zoomslider"
          height="160" x="14" y="14" value="50" valueInterval=".25" /> -
visually this goes on top of the FlareVis object - but I have to place
it outside the FlareVis. When I placed this as a child object in the
FlareVis tag, the rendered Sprites in the canvas goes above VSlider
and I can't drag the slider
</s:Group>
<mx:Form id="highlightForm"
     width="100%" height="27">
     <s:HGroup width="100%" height="100%" verticalAlign="middle">
          <s:SimpleText id="highlightSummary"></s:SimpleText>
     </s:HGroup>
</mx:Form>
Is there any other way to do this?

How does mix and match works in ECC6.0?

How does mix and match works in ECC 6.0?
Can some shared on this topic?
Thanks in advance

It;s a term used in Retail for combination of sales item eg buy 3 get 1 any other @ xx price.

How to fix my converted files which come out unlegible mixed with letters and symbols?

how to fix my converted documents which look unlegible, mixed with numbers and symbols?

Suggest you first validate the code
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2F&charset=%28detect+auto matically%29&doctype=Inline&group=0
The Float drop issue on the News page could also be related to invalid code
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2Fnews.php&charset=%28det ect+automatically%29&doctype=Inline&group=0
Fix lots of similar odd code like
<p span class="BlueType">
which should read
<p><span class="BlueType">\
The code for the sidebar photos reads
<img src="images/photos/2012DOKSpringAssembly/Bishop-Susan-Boat.jpg" align="center" width="190" height="" />
where height="", IE seems to rendering them at a height of 0px (i.e. invisible).

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

How can I have podcasts and music in the same playlist in iOS7?

How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
I can only think of these solutions:
Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast.
Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
I can only think of these solutions:
Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast.
Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

ColdFusion 11: cfclient ... how does normal CFML code and cfclient code interact?

G'day:
I am reposting this from my blog ("ColdFusion 11: ... how does normal CFML code and code interact?") at the suggestion of Adobe support:
@dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Another quick one. I'm raising these quick-fire questions here because Adobe have declined to suggest a better place to raise them, other than as comments on one of their blog entries. Well that was Ram's suggestion (which I don't think is terribly-well thought out). He declined to react to my suggestion that the Adobe ColdFusion forums might be a good place. Anit suggested Twitter or just emailing him, but I think there'd be public interest in this stuff, so don't want to resort to email.
As I'm the master of what goes on on this blog: I'll clutter this thing up.
Say I want to have a mix of "normal" CFML and <cfclient>-based CFML in the same file. I can only presume the intent is to allow this, otherwise having <cfclient> as a tag rather than just a file extension seems like a poor approach. Obviously if one can have a start tag and an end tag, then code can come before (and I guess after) the <cfclient> tags themselves.
So I'd expect this to work:
<cfset message = "G'day World"> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
However all I get is an error in JS:
Uncaught ReferenceError: message is not defined variablesScopeVariable.cfm:4
And, indeed, the only mention of message in the JS source is the one that's erroring (as it's on the right-hand side of an assignment).
So I thought perhaps <cfclient> worked like <cfthread> and I needed to pass attributes into it:
<cfset message = "G'day World"> <cfclient message="#message#"> <cfoutput>#message#</cfoutput> </cfclient>
This doesn't compile:
Attribute validation error for the client tag.
The tag does not have an attribute called message. The valid attribute(s) are ''.
ColdFusion cannot determine the line of the template that caused this error.This is often caused by an error in the exception handling subsystem.
Note also there's an error in the error message itself. It's not the <client> tag, it's the <cfclient> tag.
Rightio then, so I tried just using the request scope instead (the code's the same as the variables-scoped example, except using the request scope). No dice: same JS error.
As a last ditch effort, I just tried to see if <cfclient> was aware of anything going on around it, by passing a value on the URL, and seeing if <cfclient> saw that, eg:
<cfclient> <cfoutput>#URL.message#</cfoutput> </cfclient>
This behaved differently from the variables- / request- scoped examples, in that I didn't get a JS error, I just got this on the screen:
undefined
And no JS error. It pains me to have to do this, but let's look at the generated JS to see why the behaviour is different:
Variables scope example:
<script type="text/javascript" src="/CFIDE/cfclient/cfclient_main.js"></script> <script type="text/javascript" src="/CFIDE/cfclient/cffunctions.js"></script> <meta name="viewport" content="width=device-width"> <script type='text/javascript'> globalDivStruct=null; var _$variablesScopeVariable_func=function(){ var self=this; var variables={}; self.__init=function(){ var localdivstruct=globalDivStruct; var __output_var=""; var tmpVarArray={}; localdivstruct.outputvar+=message; return"" } }; function __startPage__$variablesScopeVariable(){ document.write("\x3cdiv id\x3d'__cfclient_0'\x3e\x3c/div\x3e"); window.ispgbuild=false; var clientDivStruct={ divId : "__cfclient_0", outputvar :"" }; globalDivStruct=clientDivStruct; try{ _$variablesScopeVariable=new _$variablesScopeVariable_func; _$variablesScopeVariable.__init() } catch(__eArg){ if(__eArg!=="$$$cfclient_abort$$$") throw __eArg; } __$cf.__flush(clientDivStruct) } __startPage__$variablesScopeVariable(); </script>
The only significant difference (other than function names, based on the file names) between this and the URL-scoped example is the indicated line above is replaced by this in the URL example:
localdivstruct.outputvar+=__$cf.__arrayGet(URL,"message",true);
So it's like it's trying to do the right thing, but just failing. I thought it might be because CF does stupid thinks with scope-key casing, and changed the <cfclient> code to expect URL.MESSAGE not URL.message, but this didn't work either.
So I'm flummoxed. I can't find anything in any documentation which might point me in the right direction, so anyone know what the story is here?
Update:At Joel's suggestion I tried this:
<script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
Thisworked. Which elicits from me a mixture of "heh: cute" and "this is an abomination".
Adam

PaulNibin wrote:
Hi Adam,
When you write code inside <cfclient>, it is translated to java script. It cannot access server side variables(defined outside cfclient).
<script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
The above code works because, message is defined in a script block and client side CFML is interoprable with javascript. So client side CFML can use variables, functions defined in javascript blocks.
Thanks,
Paul
So you're saying you did not provide a mechanism for transferring the variables from the server-side part of a file's code to the client side part? Is this not a bit of an oversight?
And what - in your mind - is the point of having a file with blocks of both normal CFML, and then a <cfclient> block, then more CFML, then another <cfclient> block (for example) if the code cannot interact?
Adam

How do I set domain and range in grapher.app?

Hey, I'm brand new to this program, and i can't figure out for the life of me how to set the domain and range of an equation.
For example, if i had the equation y=x^2 , how would i go about setting the x values>0?
Any quick replies are very appreciated! Its rather urgent.

Apple's Grapher does, in fact, have this capability. It's a shame that Apple's documentation is very poor. Grapher is a wonderful application. In any case, here is how to do it:
The general syntax is:
y = condition(s) ? expression
So for example, if you only wanted to graph the positive x values of x^2, you would enter:
y = x > 0 ? x^2
You can also have multiple conditions, separated with an ampersand (&). For example, the sinx graph from -pi to pi:
y = x > -π & x < π ? sinx
You can even limit the range. Example:
y = y < 5 ? x^2
This only shows the parabola up to the y = 5 line.
Again, you can mix and match any set of conditions you desire with the ampersand, including limits on the domain and range within the same set of conditions. Example of x^2 only showing positive x values up to the y = 5 line:
y = y < 5 & x > 0 ? x^2
Hope this helps.

Outbound Delivery Processing - mix of serialized and non-serialized product

Has anyone configured the outbound delivery processing scenario in AII to handle a mix of serialized and non-serialized products? How do you handle packing & loading transactions where you have a mix of serialized and non-serialized products in the same shipment?

Closed..
Thanks

Mixing Non JSF and JSF components

Hi All,
I wanted to mix non jsf and jsf components and I able to do this
<f:verbatim>
                                <input type="radio" name="selectBidder" value="#{currentRow['BID_ID]}"/>
                            </f:verbatim>But the problem is bean value is not getting binded.
The rendered output is containing same string i.e.
value="#{currentRow['BID_ID]}"
How to bind bean value to non jsf component.
And No Javascript please
Thanks
Sudhakar

Basically I am trying to implement something like below
<h:dataTable binding="#{consumer$Select_Provider.dataTable1}" headerClass="list-header" id="dataTable1"
                        rowClasses="list-row-even,list-row-odd" style="left: 48px; top: 48px; position: absolute"
                        value="#{consumer$Select_Provider.dataTable1Model}" var="currentRow">
                        <h:column binding="#{consumer$Select_Provider.column6}" id="column6">
                            <h:outputText binding="#{consumer$Select_Provider.outputText11}" id="outputText11" value="#{currentRow['USER_LNAME']} #{currentRow['USER_FNAME']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText12}" id="outputText12" value="Bidder"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{consumer$Select_Provider.column1}" id="column1">
                            <h:outputText binding="#{consumer$Select_Provider.outputText1}" id="outputText1" value="#{currentRow['BID_PRICE']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText2}" id="outputText2" value="Bid Price"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{consumer$Select_Provider.column3}" id="column3">
                            <f:verbatim>
                                <input name="selectBidder" type="radio" value="#{currentRow['BID_ID]}"/>
                            </f:verbatim>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText6}" id="outputText6" value="Select Bidder"/>
                            </f:facet>
                        </h:column>
                    </h:dataTable>Thanks
Sudhakar

ITunes home mix of French and English

In iTunes 7 just noticed at the store home page I have a minor mix of French and English on the same page.
Checked preferences and set for english
How do I report?

the language setting does not effect the language of the music store it simply changes the language of the menus and tool bars of itunes

How to remove ticking noise and doing audio effects?

I have a snippet of code I got for generating delay effects. After editing the appropriate things, I ran the application. It produces delays but (if i hear it correctly), the delayed sounds do not fade. It sounds like a mix of sounds. Does it depend on feedback? And there's this ticking noise accompanying the output. I just want to know how "ticking sounds" are produced (and probably how to remove them) and how to produce a correct delay.Here's my program.
public void delayProcessor(double[] data, int sampleRate, int delayInMs){
        //initialization
        int delayOffset = (int) ((delayInMs * sampleRate * 1) / 1000);
        double[] buffer = data;
        int k = 0;
        delayBufferSize = data.length + delayOffset;
        delayBuffer = new double[delayBufferSize];
        // Index where dry sample is written
        writeIndex = 0;
        // Index where wet sample is read
        readIndex = data.length;
        for (int i=0; i < data.length; i++)
            double inputSample = data;
double delaySample = delayBuffer[readIndex++];
double outputSample = (inputSample * dryLevel) + (delaySample * wetLevel);
// make sure output is in range
if (outputSample > 1)
outputSample = 1;
else if (outputSample < -1)
outputSample = -1;
// Store in output sample
data[i] = outputSample;
// Calculate feedback
inputSample += (delaySample * feedbackLevel);
// make sure input is in range
if (inputSample > 1)
inputSample = 1;
else if (inputSample < -1)
inputSample = -1;
delayBuffer[writeIndex] = inputSample;
writeIndex++;
// Update indices
readIndex %= delayBufferSize;
writeIndex %= delayBufferSize;
My sample rate depends on the user's desired setting but I'm currently testing on 11025. It's also mono, 16-bits if that information helps.
Thanks in advance! :D

Hi. Updated my code from the one above to this:
public void echoProcessor(double[] samples, double decay, int sampleRate){
     int delayOffset = (int) (10 * sampleRate)/1000;
     int delayBufferSize = samples.length + delayOffset;
     double[] delayBuffer = new delayBuffer[delayBufferSize];
     int writeIndex = 0, readIndex = delayOffset;
     int i =0;
     for(i = 0; i < delayBufferSize; i++)
          delayBuffer[i] = 0;
     for(i = 0; i < samples.length; i++){
          double oldSample = samples;
          double delay = delayBuffer[readIndex];
          double newSample = oldSample + (decay * delay);
          delayBuffer[writeIndex] = outputSample;
          readIndex++;
          writeIndex++;
          if(readIndex == delayBufferSize)
               readIndex = 0;
But I still get the continuous ticking sound but now I hear the sound output which somehow produces an echo.
The double[] samples has a length of 512 then I convert it to bytes before writing to the SourceDataLine. Any ideas?

Info please...control surface and mixer for fcp and audio recording

i'm looking for a control surface for final cut pro and also xlr/line inputs for recording guitar and vocals in cubase or audacity.
read all the info here after numerous searches. still some questions.
was looking at the tascam 1082 but not sure of the build quality...i saw one and it looked a bit cheaply built. the two demos at guitar center were falling apart. didn't look nearly as well built as the mackie. also i have been reading here and elsewhere about bugs/problems etc.
was looking at the m-audio...not sure about that one...$1250...
was also looking at mackie control surface...but no firewire...how do you hook it up to a mac? also no audio inputs. what would i need to buy to work in conjunction with that for recording audio? if i bought the mackie, i'd still have to buy an audio inpur device and that would end up costing as much as the m audio.
i know i could just buy a mixer for recording and forget the control surface...i already have a shuttle pro which works fine and i have gotten used to using the mixer in fcp...no problems. but the motorized faders on a control surface sure would be nice
so questions:
how does the mackie connect to a mac and what other device(s) would i need to record audio and how would they hook up...would they play nice together?
ppl who own the tascam...happy with it? used the mic and line preamps? are they noisy?
do i need an additional firewire bus reguardless of which control surface i get?
how does one route the audio for these when in fcp? i currently route my audio through my dsr 11 deck. will the control surface just go through firewire or would i have to actually jack into the control surface with additional cables and have to remove my present cables from my speakers everytime i want to use the control surface?
sorry so many questions. it's really tough to make an informed decision in buying something if you don't understand the mechanics of it.
btw, appreciate the info so far that i found doing my searches.
thanks
carl

I've got the Tascam FW1082 and I absolutely love it. I can't believe I ever edited without it. I'm considering upgrading to the 1884 in the future.
As for the mic preamps, they sound great. Nice and clean. There's no such thing as a line preamp, but the line inputs are clean as well.
For routing, I go to the 1082 via firewire until I turn on my external video monitor, at which point I send both video & audio to the deck and route the audio from the deck into a pair of the mixer's analog inputs. That way you avoid the delay of external monitoring. The 1082 allows you to listen to both the computer & the inputs at the same time, so switching back and forth is seamless.
As for durability, I've had it out on a few location recordings, but most of the time it's on my desk. It's still in mint condition. I'm sure if it was on a display where any 10 year old could come mess with it, it wouldn't be in as great of shape, but then again, a Neve console wouldn't look that great if every little brat that walked in the door could play with it. If you take care of your stuff, you'll have no issues with this mixer.

CVP supports mixed G.711 and G.729

"CVP supports mixed G.711 and G.729"
Where do you configure the allowed codec(s)?
Also, if the ingress gateway is also the vxml gateway and the ingress is SIP with g729 only (so no midcall renegotiation) but the vxml call leg is g711 -- how do you specify the transcoding resource to be used? If I change the vxml call leg to use g729 (flat codec) also, do I still have to go through the whole hex editing thing mentioned here (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp8_0/release/notes/cvp_801_rnotes.pdf)? I couldn't find any mention of this in the later CVP release notes, so not sure if it's still needed.
thanks,
will

Thanks for the quick reply Chris!
"You configure them on your dial-peers and region setting in CUCM."
CUCM isn't involved yet though unless I'm missing something (which isn't as rare as I'd like). CVP sets up the VXML call leg from the ingress gateway to the VXML gateway (same device here) right? Does it just use the same dial-peer level codec(s) as you are allowing in your cube->cvp call server dial-peer? Is that what you mean?
LTI looks pretty slick, but I can't find any info regarding compatibility with CVP although I'm not entirely sure how that codec selection (ingress gw to vxml gw) works. Codec renegotiation is out unfortunately. It's g729 ingress with every call transcoded at the CUBE to g711. Trying to retroactively fix this and other design flaws and we'll have to move the agents to g729.
Looks like we either transcode for the VXML call leg or migrate that to g729 as well. Seems like transcoding gives us the flexibility to add asr/tts at a later date if/when requirements change. On the other hand, using a flat codec end to end makes troubleshooting easier and frees up those dsp's. Any advice/experience to share one way or the other?
thanks,
will

How to mix 4:3 and 16:9

Similar Messages

Maybe you are looking for