How to Mix Export and Burn  5.1 Surround in Premiere CS4

Ok I'm attempting my first 5.1 mix in Premiere CS4.  I have a couple of basic questions about mixing and exporting in 5.1.
I have created my 5.1 master sequence in premiere and have broken out my 5.1 track to 6 mono audio files.  Right now they are all .wma with a very high bitrate because that's the only format I was able to rip off the Blu-ray disc I'm experimenting with.  I have also learned to change my audio hardware to run off of my Matrox Driver to utilize my hardware for my matrox axio LE.  The end result I'm trying to produce is a 720p 23.967fps H.264 Blu-ray disc with 5.1 sound.
Questions:
Should I use wma files for audio or something else?  At first I noticed a little bit of a lag in performace before switching my audio hardware to the Matrox Driver.
Do I have to use Dolby Surcode upon export to burn in Encore?  When I first upgraded to premiere CS4 I  used my 3 free encodes while testing our the program, is there any way to get them back?
When importing the Audio into Encore is there anything special I need to do or can I just drop the Dolby 5.1 track onto the timeline as I would normally with at stereo track?

Should I use wma files for audio or something else?
PCM WAV 16 bit stereo @ 48 KHz.
Do I have to use Dolby
Surcode upon export to burn in Encore?  When I first upgraded to
premiere CS4 I  used my 3 free encodes while testing our the program, is
there any way to get them back?
Yes, no.
When importing the Audio
into Encore is there anything special I need to do or can I just drop
the Dolby 5.1 track onto the timeline as I would normally with at stereo
track?
No, yes.

Similar Messages

  • I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

    I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?  Presently after exporting and burning each photo is identified by the file name rather than each individual title description.  

    File name and Title are not the same thing.
    Filename is attached to the Jpeg file in the Finder.
    Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
    So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
    You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
    Regards
    TD

  • Itunes keeps telling me "the registry setting for importing and exporting and burning cds are missing" reinstall itunes.  I have reinstalled itunes about 30 times and still get the same message.  I do not have another cd burning software loan

    I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer"  I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs.  All of my drivers and firmware are up to date. Please help

    Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
    The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

  • Audio gets out of sync after export and burn to iDVD - works in iMovie

    I've burned my DVD show twice on iMovie and iDVD and the audio music tracks slowly get displaced over the course of the show (15 min) after exporting and burning to iDVD. It gets pushed back so that it starts later each new track...I've locked the audio to the playhead for each new audio track - however, there are some empty gaps between the tracks, does this have anything to do with the displacement? Or should it not matter since the tracks are locked?
    I had it all synced up in the playback on iMovie and had it aligned with visuals, however, after burning, it gets displaced and everything gets off...
    Any help would be appreciated, thank you
    Chris

    The problem:
    http://www.dvformat.com/htm/features/2000/800/dv_formatfaq.htm
    (Scroll down about two thirds to "What's the difference between locked and unlocked audio?" )
    The solution:
    Always use 16-bit/48kHz audio.
    iMovie: Audio and Video Lose Synchronization
    http://docs.info.apple.com/article.html?artnum=61636
    A few possible solutions here:
    http://www.danslagle.com/mac/iMovie/audio/1001.shtml
    iMovie: Improving audio and video synchronization
    http://docs.info.apple.com/article.html?artnum=42974

  • How do you save and burn a movie to play on a dvd player to show on your tv

    I finished a movie, and saved it as a MP4 file. How do you save and burn a movie to play in a dvd player and show on your tv.

    I found an iDVD program through Softonic. Do you know anything about reliability and if it is safe to download this one? If not do you have any suggestions for one I might download.

  • ? Export and burn project in .avi format

    How do you export a FCP project to disc so that it is just an .avi file. My video clip needs to be uploaded to a website and the site requires an .avi file. I tried emporting it as an .avi file from FCP but after I burned it in DVDSP it comes up as audio TS and video TS. Any help would be much appreciated.
    Thanks,
    Glenn

    There may be other ways but I export things as Animation or Intermediate and then just throw them into VisualHub for web conversions like that. It may be good enough for you, I'm not sure.
    If I'm understanding you correctly you need to dump it onto a Data DVD for delivery? Toast will do that or burning a disc from the Finder.
    Message was edited by: W. Raider

  • Project screen when exported and burned becomes tiny

    Hello,
    I am working on a project in Adobe Encore CS4. The project appears to be fine when we preview in the program, though there is a thin black border around it. When we export it and burn it to a dvd something changes. We play it on regular dvd player and tv and the picture becomes tiny and there is a huge black border around it. My boss and I cannot for the life of us figure out what setting is causing this. My boss has done projects before and not had this problem. We have compared previous projects to this one and can't find any settings that are different. Any help you can offer would be appreciated.

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • How do i export and import Contacts from and to to Iphone4 and Windows PC

    How do I export Contacts from Iphone to windows XP pc
    and import already exported contacts to Iphone 4

    doesn;t it work what i wrote in above comment?
    if you just want to backup your iphone cantacts in windows ( and not vice vera)...then
    1- delete all contacts from windows ( i used win7 so ther's a "contacts" system folder....but in iwnXP , i guess it is called Address Book)
    2- Connect iphone to PC
    3- in iTunes, select your device, go to "Info" tab.
    4- mark checked -- >Sync Contacts with
    5- From the dropdown options, select "Windows Contact"
    6- click "SYNC: button.
    that's it...you should see your iPhone contacts in windows.

  • How I can Export and Import tables using BRTOOL ?

    Dear All,
    Since we upgrade the oracle from 9.0.2 to 10.2.2 we not using SAPDBA any more.
    please help me if you now how to export and import tables in sapr3 using brtools?
    thanks and Best regards,
    Chrisna

    Dear Chrisna,
    first of all you should get the recent version of the BRTOOLS (currently it's BRTOOLS 7.00 (<b>26</b>)). The developers are working hard on making these tools more reliable and usable so you should not deny the improvements to yourself.
    Now to your problem:
    Try this call:
    brspace -f tbexport -o SAPR3 -t SSF_PSE_D,SSF_PSE_H,HTTPURLLOC
    You don't need to specify a tablespace; it's just a additional option to select what tables you like to export.
    You may also want to check these notes for further "enlightment"
    <a href="http://service.sap.com/sap/support/notes/976435">#976435     Support for Oracle Data Pump in BRSPACE</a>
    <a href="http://service.sap.com/sap/support/notes/713497">#713497 - New BRSPACE options for "Reorg", "Rebuild" and "Tablespace"</a>
    <a href="http://service.sap.com/sap/support/notes/647697">#647697 - BRSPACE - New tool for Oracle database administration</a>
    <a href="http://service.sap.com/sap/support/notes/646681">#646681 - Reorganizing tables with BRSPACE</a>
    <a href="http://service.sap.com/sap/support/notes/12741">#12741 - Current versions of BR*Tools and SAPDBA</a>
    <a href="http://service.sap.com/sap/support/notes/651812">#651812 - FAQ: BR*TOOLS and SAPDBA</a>
    KR Lars

  • How to correctly export and share an ADF project?

    We are having some trouble with our SVN, so for the moment I am trying to share an ADF application I started developing with another developer by making a zip file of the entire application directory. We are both using JDeveloper 11.1.1.6.
    My colleague extracts the zip file and opens the application jws file, but JDeveloper on his machine does not seem to be recognizing that it is an ADF application. Many of the ADF libraries are missing in the project classpath, and the design editor does not open JSF files correctly, and shows lots of errors.
    Why might this be happening? What is the correct way to export and share an ADF application workspace?

    First thng to try is to rename the system11.1.1.x.x.x.x folder and start jdev again. Jdev will recreate the folder, but any bad configuration inside the folder are gone and this might help to get it running again. However, all customization done in jdev are gone. It's like jdev is freshly installed.
    If you try this and get the question if you like to migrate from an older version answer 'no' as you might get the error back this way.
    Timo

  • How would I edit and burn HD 3D home movies at 1080i/60i to a Blu ray player on an iMac?

    I own a Sony HDR-TD30V HD 3D Camcorder and would like to edit and burn my 3D home videos (1080i/60i) to a Blu ray capable of playing on a home blu ray player or PS3 using iMac software.

    Well, you won't be doing 3D with Final Cut Express!  (With FCE you could edit 2D filmed with your camcorder @ 1080i60 but not 3D.)
    For that matter, Final Cut Pro X doesn't even handle 3D out of the box.  But there is a third-party plugin called Stereo 3D Toolbox that works with Final Cut Pro X. 
    As for BluRay, you will need an external BluRay burner and software that supports it ... like Roxio Toast Titanium.
    Also, I noticed that your profile says you are using OS X 10.6.8 - I strongly suggest upgrading to 10.7 (Lion) or 10.8 (Mt. Lion) before investing in FCP-X and other video software.

  • Export and burn - Final Cut Studio to DVD Studio Pro

    I think I am doing all the right settings when I try and convert material that was filmed with an HDV camera into a suitable format for burning and playing on a traditional SD DVD recorder. But even with encodings of 720 x 576i PAL, the disc once burned is rejected by my DVD player, although it plays fine on the Macbook Pro I amusing for editing and burning. Am I missing something obvious? I looked for a standard MPEG -2 setting in the Quicktime Conversion window, but couldn't find one. I have the first version of Final Cut studio, which I think is really FCP v.5.1.
    Thanks
    Nick

    It sounds as if you are choosing the HD DVD checkbox in DVD SP.
    You shouldn't.

  • How to Run Export and Make Dump and Log File with Dates on NT

    Hi Gurus,
    set ORACLE_SID=ORCL
    set ORACLE_HOME=D:\ORACLE\ora92
    for /f "tokens=2,3,4 delims=/ " %%a in ('date /t') do
    set fdate=%%a%%b%%c
    exp userid=userid/password@connectstring
    file=exp%fdate%.dmp log=exp%fdate%.log full=y
    I am using above script for export and make dump file with dates, but when i am excuting this script with Schedule task i am getting error.
    C:\Documents and Settings\krishna>for /f "tokens=2,3,4 delims=/ " %%a in ('date
    /t') do
    %%a was unexpected at this time.
    Help is highly appriciated.
    Thanks & Regards
    praveen

    HOST('EXP80 MRPAY/MRPAYS FILE=D:\BACKUP\MRPAY'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=MRPAY CONSISTENT=Y');
    HOST('EXP80 SECSYS/SECSYS FILE=D:\BACKUP\SECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SECSYS CONSISTENT=Y');
    HOST('EXP80 SICPA/SICPA FILE=D:\BACKUP\SICPA'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPA CONSISTENT=Y');
    HOST('EXP80 SICPAINVSYS/SICPAINVSYS FILE=D:\BACKUP\SICPAINVSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAINVSYS CONSISTENT=Y');
    HOST('EXP80 SICPAGLSYS/SICPAGLSYS FILE=D:\BACKUP\SICPAGLSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAGLSYS CONSISTENT=Y');
    HOST('EXP80 SICPAPURHSYS/SICPAPURHSYS FILE=D:\BACKUP\SICPAPURHSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAPURHSYS CONSISTENT=Y');
    HOST('EXP80 SICPARECSYS/SICPARECSYS FILE=D:\BACKUP\SICPARECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPARECSYS CONSISTENT=Y');
    HOST('EXP80 SICPASECSYS/SICPASECSYS FILE=D:\BACKUP\SICPASECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPASECSYS CONSISTENT=Y');
    HOST('EXP80 FASYS/FASYS FILE=D:\BACKUP\FASYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=FASYS CONSISTENT=Y');
    HOST('EXP80 ATTSYS/ATTSYS FILE=D:\BACKUP\ATTSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=ATTSYS CONSISTENT=Y');
    HOST('EXP80 ATTENDANCESYSTEM/ATTENDANCESYSTEM FILE=D:\BACKUP\ATTENDANCESYSTEM'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=ATTENDANCESYSTEM CONSISTENT=Y');
    Arshad

  • How do I purchase and download the latest version of Premiere Pro?

    How do I purchase and download the latest version of Adobe Premiere Pro?

    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  • How to mix HTML and XML??

    Hi guys,
    I want to stream some xml content to the browser from a servlet by setting the content-type as 'text/xml' and let IE browser take care of the parsing & formatting. It is important for me to show the formatted (tree structure) xml content in the browser. But I also need to show a text heading in the browser...Something like this ::
    Application XML Message ---> header text
    <xml>
    <id>.....
    <InvoiceDate>.....
    </xml>
    I know that the content has to be 'text/html' for the header text , and text/xml to let IE do automatic formatting of the xml data...How can I mix the contents? I don't want to format the xml file programattically or by using XSLT..Is it possible?
    Thanks guys

    I think it's possible; just create a page containing the header you want to display and an iFrame with the URL set to the address of the service that builds the XML. In fact you'll make two requests to server: one for the page containing the fancy header + the iFrame and one for the XML itself. Main page has text/html content and the contained iFrame will have text/xml content:
    More artistically:
    The header of the message
    The iFrame pointing to the URL that
    generates the XML.
    Be sure to use appropriate HTML styles so the iFrame border will not get displayed.

Maybe you are looking for