How to mix wide variety of footage types in Premiere properly

Hello,
I am wondering what is the best, highest quality workflow in order to mix the following types of footage on a single timeline in Adobe Premiere CS6:
HDV 1080i30 (Canon HV30 _non-square_ pixel aspect ratio (1440x1080))
720p60 square pixel aspect ratio (GoPro footage)
1080p30 (Canon XF100 MPEG2)
I'm guessing that it would be wise to limit my final output to 720p30 to avoid stretching the smaller frame footage. Final output will be to both DVD and the web, if that makes any difference.
Thanks for any assistance,

I am a huge fan of using the Cineform codec. So are the makers of the GoPro cameras. So much so, in fact, that they bought the company.
The GoPro footage can be converted to Cineform for free. The software is on their site. If you want the other formats to be converted, there is a $199 product that can convert HDV and AVCHD as well as most DSLR cameras. They claim to be adding more cameras to their "tested" list every day and will take suggestions as to what they should test next. For more professional requirements, the software is $299. The 3D version is only $999, which is probably reasonable. I don't know. I am not into 3D at all. Yet.
Anyway, the point is that you can convert all of your footage to the same codec, and make it a LOT easier to edit on your computer (Mac or PC). You can even take it all to 24P though their software.
There are so many advantages to using Cineform, I can't begin to tell you about it here. I became a fan back when I bought an HDV camera and Premiere Pro didn't have a way to edit it yet. Cineform saved the day. Adobe used Cineform in Premiere Pro for one or two versions (I can't remember for sure if it was one or two). I highly recommend you take a look for yourself.
http://cineform.com/
There is a free trial available for each product in the downloads section. I have not tried this, but you might be able to download the $299 program and convert all of your footage during the trial period. I know for a fact that Premiere Pro CS6 will continue to allow you to edit and export the Cineform codec because I haven't purchased the new products yet, but the free software allows me to edit my old Cineform files from 2004.
Oh, and yes, drop it all to 720 to make your life easier and maintain the quality.

Similar Messages

Filter plug-in: How to mix my RGB image with source document image properly?

Hi All,
My problem seems to be very common, but I can't find any answers in documentation.
I made Filter plug-in. It composes RGB image and mixes it with user source image in the document.
Now I load FilterRecord->
inData to byte array and recode each pixel with HostCSConvertColor function.
My code looks like that:
byte
*input = (byte*)filter_record->inData;
int
width = filter_record->inRect.right - filter_record->inRect.left;
int height = filter_record->inRect.bottom - filter_record->inRect.top;
byte
*transfer_buffer;
int size = width * height * 4;
transfer_buffer = new byte[size];
byte *output = transfer_buffer;
int
planes = CSPlanesFromMode(fpb->imageMode, 3);
int16 color[4];
for(j = 0; j < height; j++) {
 for(i = 0; i < width; i++) {
 for(k = 0; k < planes; k++) {
 color[k] = input[i * align + k]; }
 HostCSConvertColor(filter_record->colorServices, space, plugIncolorServicesRGBSpace, color); *
output = (byte)color[0]; output++; *
output = (byte)color[1]; output++; *
output = (byte)color[2]; output++; *
output = 255; output++; }
// for width
 input += line;
} // for height
After that I mix my RGB image with output buffer and make back transition via
HostCSConvertColor to the document Color Space.It works very slow and looks ugly.
But I can't find any other way to mix my RGB image with photoshop image which can be not RGB Color Mode.
Your help will be very appreciated.
Sofia

Is it important to you to be able to process input color spaces other than RGB?
You can limit your filter to accept only RGB data if you set things up properly in the PiPL resource (e.g., yourfiltername.r file).
Here's an example for a filter that accepts only RGB or grayscale images:
SupportedModes
noBitmap,
doesSupportGrayScale,
noIndexedColor,
doesSupportRGBColor,
noCMYKColor,
noHSLColor,
noHSBColor,
noMultichannel,
noDuotone,
noLABColor
EnableInfo { "in (PSHOP_ImageMode, RGBMode, GrayScaleMode, RGB48Mode, Gray16Mode, RGB96Mode, Gray32Mode)" },
With the above, the filter will be disabled (grayed-out in the menu) for modes other than those listed.
-Noel

Streamclip and mixing AVCHD with .264 footage

I have an AVCHD camcorder for land shots and a .264 waterproof camcorder for on water and want to mix footage in FCE4. I cannot upload the .264 and would have to use streamclip.
1/Which version do i download the 19.2 or 19.3.b version?
2/ It also says on the site there are MPEG2 issues with snowleopard which worries me as I don't yet have the understanding to fix it if it causes an issue. Is this a real problem or resolved now?
3/ Would i be better (or can I) rough edit the .264 footage on imovie then burn to DVD and re import to FCE 4 from DVD to then mix with the AVCHD footage?
4/ Can I import from un-encrypted DVD's?
Thanks A Mac newbie

Tom, thanks for the quick response. Your books has arrived and is great but these questions are a little Off Piste in relation to FCE4 so thanks for your help
1/ I think I have Snow Leopard as this is a new (1 week old) I Mac from Apple UK. How do I tell?
2/ If i convert the .264 will i definitely be able to mix the footage from both my camcorders in FCE4?
3/ Is the workaround re installing the MPEG2 component or something else I have to do ?
As i am new to Mac if it is not an in built workaround I am concerned i will mess it up and lose MPEG2 playback ability (although not sure how that would actually effect me with the Audio Video media I use).

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

New Effective CAL essay: How do I create an abstract data type in CAL?

How do I create an abstract data type in CAL? An abstract data type is one whose internal representation can be changed without needing to modify the source code of client modules that make use of that type. For software maintainability, it is a good idea to make a type that is subject to change or enhancement into an abstract data type. Another reason to create an abstract data type is to enforce invariants for values of the type that can only be ensured by using constructor functions (i.e. functions that return values of that type). In principle it is simple to create an abstract data type in CAL. For an algebraic data type, make the type constructor public and all data constructors private. For a foreign data type, make the type constructor public and the implementation scope private. If a scope qualifier is omitted, the scope is taken to be private. For example, the Map algebraic data type has the public type constructor Map and the data constructors Tip and Bin are each private, so it is an abstract data type. /** A map from keys (of type {@code k@}) to values (of type {@code a@}). */ data public Map k a = private Tip | private Bin size :: !Int key :: !k value :: a leftMap :: !(Map k a) rightMap :: !(Map k a); There are a number of invariants of this type: the size field represents the number of elements in the map represented by its Bin value. The keys in leftMap are all less than key, which in turn is less than all the keys in rightMap. In particular, non-empty Map values can only be created if the key parameter type is a member of the Ord type class. Values of the Map type can be created outside the Cal.Collections.Map module only by using constructor functions such as insert: insert :: Ord k => k -> a -> Map k a -> Map k a; public insert !key value !map = ... The owner of the Cal.Collections.Map module must ensure that all invariants of the Map type are satisfied, but if this is done, then it will automatically hold for clients using this function. Some examples of foreign abstract data types are Color, StringNoCase and RelativeDate: data foreign unsafe import jvm private "java.awt.Color" public Color; data foreign unsafe import jvm private "java.lang.String" public StringNoCase; data foreign unsafe import jvm private "int" public RelativeDate; The private implementation scope for Color means that a foreign function whose type involves Color can only be declared in the Cal.Graphics.Color module where the Color type is defined. A foreign function declaration involving the Color type relies on the compiler knowing that the Color type corresponds to java.awt.Color to resolve the corresponding Java entity i.e. it must know about the implementation of the Color type. Having a private implementation scope means that the Color type can be changed to correspond to a different Java class, or indeed to be an algebraic type, without the risk of breaking client code. In all these three cases there are useful, and different, design reasons to adopt a private implementation scope: For RelativeDate, the Java implementation type int represents a coded Gregorian date value in the date scheme used by Crystal Reports. Not all int values correspond to valid dates, and the algorithm to map an int to a year/month/day equivalent is fairly complicated, taking into account things like Gregorian calendar reform. Thus, it is desirable to hide the implementation of this type. For StringNoCase, the implementation is more straightforward as a java.lang.String. The reason to adopt a private implementation scope is to ensure that all functions involving StringNoCase preserve the semantics of StringNoCase as representing a case-insensitive string value. Otherwise it is very easy for clients to declare a function such as: foreign unsafe import jvm "method replace" replaceChar :: StringNoCase -> Char -> Char -> StringNoCase; which does not handle case-insensitivity correctly, but is a perfectly valid declaration. This declaration results in a compilation error when it is placed outside the module in which StringNoCase is defined because of the private implementation scope of StringNoCase. For Color, the issue is somewhat more subtle. The java.awt.Color implementation type is semantically the same as the CAL Color type. The problem is that java.awt.Color is mutable (since it can be sub-classed to create a mutable type). It is preferable for a first-class CAL type to not be mutable, so we simply make the implementation scope private to ensure that this will be the case. A somewhat less encapsulated kind of abstract data type can be created using friend modules and protected scope. For example, if an algebraic type is public, and all its data constructors are protected, then the data constructors can be accessed in the friend modules of the module in which the type is defined. Effectively this means that the implementation of the semantics of the type stretches over the module in which the type is defined, and all of its friend modules. These must all be checked if the implementation of the type is modified. Given the merits of abstract data types discussed above, it is perhaps surprising that most of the core types defined in the Prelude module are not abstract data types. For example: Boolean, Char, Int, Double, String, List, Maybe, Either, Ordering, JObject, JList, and all record and tuple types are non-abstract types. There are different reasons for this, depending on the particular type involved. For example, Boolean, List, Maybe, Either and Ordering are all rather canonical algebraic data types with a long history in functional languages, with many standard functions using them. They are thus guaranteed never to change. In addition, their values have no particular design invariants that need to be enforced via constructor functions. Exposing the data constructors gives clients some additional syntactic flexibility in using values of the type. For example, they can pattern match on the values using case expressions or let patterns. Essentially the same explanation holds for record and tuple types. Although non-tuple record types are less canonical, they do correspond to the fundamental notion of an anonymous named-field product type. The "anonymous" here simply means that the programmer can create an entirely new record type simply by creating a value; the type does not have to be declared anywhere prior to use. Char, Int, Double, String, JObject and JList are foreign types where in fact part of the semantics of the type is that we want clients to know that the type is a foreign type. For example, we want clients to know that Prelude.Int is essentially the Java primitive unboxed int type, and has all the semantics you would expect of the Java int type i.e. this is quite different from RelativeDate which is using int as its implementation type in a very tactical way that we may choose to change. One can think of a public foreign type declaration with public implementation scope as simply introducing the Java type into the CAL namespace. One interesting point here is with CAL's naming convention for public foreign types. We prefix a type name by "J" (for "Java") for foreign types with public implementation type such that the underlying Java type is mutable. This is intended as mnemonic that the type is not a pure functional type and thus some caution needs to be taken when using it. For example, Prelude.JObject has public Java implementation type java.lang.Object. In the case where the underlying Java type is not mutable, we do not use the prefix, since even though the type is foreign; it is basically a first class functional type and can be freely used without concern. For example, Prelude.String has public Java implementation type java.lang.String. In the case where the implementation type is private, then the fact that the type is a foreign type, whether mutable or not, is an implementation detail and we do not hint at that detail via the name. Thus Color.Color has as its private Java implementation type the mutable Java type java.awt.Color. When creating abstract data types it is important to not inadvertently supply public API functions that conflict with the desired public semantics of the type. For example, if the type is publicly a pure-functional (i.e. immutable) type such as Color, it is important not to expose functions that mutate the internal Java representation. A more subtle case of inadvertently exposing the implementation of a type can occur with derived instances. For example, deriving the Prelude.Outputable and Prelude.Inputable type classes on a foreign type, whose implementation type is a mutable Java reference type, allows the client to gain access to the underlying Java value and mutate it
(by calling Prelude.output, mutating, and then calling Prelude.input). The solution in this case is to not derive Inputable and Outputable instances, but rather to define a custom Inputable and Outputable instance that copies the underlying values.

Hi Pandra801,
When you create a the external content type, please try to add a filter based on your select statement.
http://arsalkhatri.wordpress.com/2012/01/07/external-list-with-bcs-search-filters-finders/
Or, try to create a stored procedure based on your select statement, then create ECT using the SQL stored procedure.
A step by step guide in designing BCS entities by using a SQL stored procedure
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/10/173-a-step-by-step-guide-in-designing-bcs-entities-by-using-a-sql-stored-procedure.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How can i change a pdf file type to another file type

how can i change a pdf file type to another file type

You can copy the contents and paste it into a Word file. Just don't expect everything to transfer or to retain all of the formatting.

How to restrict material master by material type t-code MM01

Hi,
how to restrict Materilal master by Material type in t-code MM01
I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
Amit

>
sapvinithbasis wrote:
> hi
> plz help me out in solving this issue
> regards vinith
Vinith,
I have explained in great detail exactly what you need to do at every stage. The steps I have outlined are the same that I follow every time that I want to apply material type restrictions.
I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you.
If you have done the following then it will work:
1. Assign auth group to material type via OMS2
2. Verified that check for M_MATE_MAR is active
3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
This is the last comment I will make on this topic.
Cheers
Alex

How to change a label of User Type in OIM 11g

How to change a label of User Type in OIM 11g. If we have to change label of First Name or Last name then we can change in User.xml and some in resource properties file but what is the procedure to change for User Type.

Follow this: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#BABDEGFE
i .Copy the $OIM_ORACLE_HOME/server/apps/oim.ear/admin.war/WEB-INF/lib/IdentityTaskFlow.jar to a local work directory, unzip it and locate UserAttributes.properties at /oracle/iam/resources/IdentityTaskFlow.
ii. Update the userAttributes.properties file in the IdentityTaskFlow.jar/oracle/iam/resources/IdentityTaskFlow and create a new IdentityTaskFlow.jar
iii. Copy the updated IdentityTaskFlow.jar to $OIM_ORACLE_HOME/ server/apps/oim.ear/admin.war/WEB-INF/lib/
For "User Type", try putting the property name as "user_type" or try "role". One should work.
HTH,
BB

How to assigne value in sub record type

Dear below mention record type database,now i want to assigne value in payr_rec type,in this recrocrd type have one column party_id,but how can assigne value int this field ,
TYPE group_rec_type IS RECORD(
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE := G_MISS_PARTY_REC
please guide.

to get the desired default party_rec attribute value, just assign the "sub-record" attribute defaults as desired; PL/SQL will assign a default (non-null) record as the party_rec value using those attribute defaults:
create or replace package P_Test_It
as
     type party_rec_type is record (
          dummy varchar2(1) default 'X'
     type group_rec_type is record (
          group_name VARCHAR2(255),
          group_type VARCHAR2(30),
          created_by_module VARCHAR2(150),
          -- Bug 2467872
          mission_statement VARCHAR2(2000),
          application_id NUMBER,
          party_rec PARTY_REC_TYPE
end;
set serveroutput on
declare
     rec p_test_it.group_rec_type;
begin
     dbms_output.put_line(rec.party_rec.dummy);
end;
X
PL/SQL procedure successfully completed.Hope it helps.
Gerard

How to get keys of a particular type

Following are my objects:
DepartmentKey - primary key is departmentName, a String
Department
EmployeeKey - primary key is employeeId, an integer
Employee
I have 5 DepartmentKey-Department key-value entries in a cache and 2000 EmployeeKey-Employee key-value entries in the same cache.
How do I get all the DepartmentKeys from the cache? In general, how to get keys of a particular type (class name)?
Thanks
Ghanshyam

I guess I am deeply off track regarding the general approach towards storing items in the cache.
Following is my problem domain:
A Merchant is any establishment that accepts credit cards. (It could be the local Subway down the street or Macy's, etc.). A Transaction is a credit card transaction.
public class Merchant implements Serializable{
private String merchantId; // primary key
private double averageTxnAmount;
private double totalTxnAmount;
private long totalTxnCount;
public class Transaction implements Serializable{
private String merchantId; // merchant that originated the txn
private double amount;
private Timestamp txnTime;
private String txnType; // sale, return, etc.
public class MerchantKey implements Serializable, KeyAssociation{
private String merchantId;
public Object getAssociatedKey{
return merchantId;
public class TransactionKey implements Serializable, KeyAssociation{
private String merchantId;
private Timestamp txnTime;
private double amount;
public Object getAssociatedKey{
return merchantId;
I want to update a merchant's average txn amount as transactions come in.
Let's say I have a million merchants in a partitioned cache cluster spread across some machines.
Transactions come into the cluster quite rapidly, say tens in a second. The process that inserts the transaction into the cluster must also update the merchant to which the transaction belongs, as follows:
Transaction t = ...
cache.put(tKey, t); // store the transaction into the cache
MerchantKey mKey = new MerchantKey(txn.getMerchantId());
Merchant m = (Merchant)cache.get(mKey);
// update the merchant's avg txn amt
m.setAverageTxnAmount((txn.getAmount() + m.getTotalTxnAmount())/m.getTotalTxnCount() + 1);
m.setTotalCount(m.getTotalCount() + 1);
// store the updated merchant back into cache
cache.put(mKey, m);
OR
Transaction t = ...
cache.put(tKey, t); // store the transaction into the cache
MerchantKey mKey = new MerchantKey(txn.getMerchantId());
Merchant m = (Merchant)cache.get(mKey);
MerchantUpdater agent = new MerchantUpdater(t);
cache.invoke(mKey, agent);
public class MerchantUpdater implements AbstractProcessor{
public Object process(Entry entry){
Merchant m = (Merchant)entry.getValue();
// update m's avg txn amt, total count using t
entry.setValue(m);
The basic idea is to store all merchants and all transactions (which could be tens of millions in a day) for a day in memory and to update the merchant objects as transactions come in throughout the day. The above example shows updating just the merchant's average txn amount, but in reality, it could be updating a number of things about the merchant.
Am I using the api in the right spirit or is my approach seriously whacked? Can you please comment?
Thanks
Ghanshyam

How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

How do I revert to original footage in Final Cut Pro X version 10.0.9?
For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
Only the edited version which is no good without the audio?
Please Help

What format is your problem clip? Are there wave forms visible in the section without sound?
Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
Russ

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How to create a new 'id and type rect' in _edge.js from your stage in javascript

how to create a new 'id and type rect' in _edge.js from your stage in javaScript

_edge.js is an object file their is any way to create ?
if i run this script "alert(Stage);" in creationComplete
i will get
i have little idea on object example
var obj = {car: "honda city"};
obj.bikes = {model: "suzuki"};
alert(obj.bikes.model);
Anyway thank u vivekuma for ur kind reply!

How to use objects as a message type in WSDL?

How can I use object as a type for the message in WSDL?
For example, I want to achieve something like this:
<message name="DBConnection">
<part name="conn" type="???"/>
</message>
In the above example, for any operation getConnection(), the return type would be an object of the type Connection.
Any suggestions ?
Thanks,
Dhaval

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

How can i include a sampling of type in ps7 type tool?

how can i include a sampling of type in ps7 type tool? i did this in ps3

I guess in my zest to answer your question i had forgotton about Adobe Type Reunion.
What operating system are you using photoshop 7 on?
photoshop 3.05 on mac os 7.6.1

How to mix wide variety of footage types in Premiere properly

Similar Messages

Maybe you are looking for