How to mixdown in Logic Express?

I've searched and searched and have probably just missed it--but where is the button or whatever is used in Logic Express that creates a file of your final mix, test mix of your project located?

Appreciate the info.
Feel like an old dog trying to learn a bunch of new tricks as I am a longtime Cakewalk/Sonar user who "switched" in the last month.
Thanks for the accurate and timely answer:)

Similar Messages

  • How do you use Logical Expressions in the RTF?

    How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
    For example:
    if (conditionA and conditionB) then...
    Regards,
    Smita

    Thank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
    Thanks again, and best regards:)

  • How do I install Logic Express without CD

    Just got a new mac and it has no CD drive. So how do I go about installing Logic Express that I own? I only see updates listed in the downloads sections of apple pages.

    Thank you, this is a good suggestion. But for some reason I coulnd't get it to work. I followed the steps as described but the drive never showed up under "devices" on the computer without the drive.
    Anyway, I created a disc image of the installation disc and all ended well.
    Thx.

  • How to work with Logic Express 8 and Garageband 11 v.6.0.4?

    I just installed Logic Express 8 and I don't know what it's done to my existing Garageband files - they seem to have been overwritten into Logic folders. I don't seem to be able to open them in either program. I'm sure there are answers buried in the files here, but I'd appreciate a quick How To, please! Can't work.

    You need more to be sure the Digidesign core audio drivers are installed for your MBox, which are separate from the firmware upgrade.
    A standalone installer for the OS X (10.4) drivers can be found at:
    http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=24268
    While I'm glad to hear you're using Logic, your iMac should have no problem running ProTools LE. The current version, 7.3, has universal binary support for the new intel Macs .... dependign on the version you have, though, you may need to pay a small amount to upgrade to 7.3 The updaters for 7.3 also include the core audio driver package I mentioned above, and the ProTools LE 7.3 updaters can be found at:
    http://www.digidesign.com/index.cfm?navid=3&langid=100&eid=170&categoryid=36

  • How to open a Logic express project in Logic Pro7

    Hello All,
    I am not sure if this is possible or not. I am working in Logic Express 8 and my buddy has Logic Pro 7. We would like to be able to take what I'm recording and bring the project into Logic Pro7 but I can't seem to be able to do so. Any suggestions? I've tried just coping a whole project folder onto a thumb drive and opening it on his system but it doesn't seem to like my project file.
    Thank you

    http://www.lafcpug.org/Tutorials/basicfcp5_to4.html
    Open FCP5 projects in FCP4 with XML Export/Import
    by Nick Meyers

  • How to pass dynamic logical expression to function module

    Hi,
    I'm using FM META_READ_TABLE as below:
    As mentioned above im using META_READ_TABLE FM to get company codes from CSKS table of ECC. Below is the code im using:
       DATA:i_opt type STANDARD TABLE OF RFC_DB_OPT, i_fld type STANDARD TABLE OF RFC_DB_FLD,
           i_res type STANDARD TABLE OF TAB512.
    Constants:   c_expr(72) TYPE c VALUE 'KOSTL EQ COST_CTR', c_fld(5) TYPE c VALUE 'BUKRS'.
      w_opt-text = c_expr.
    w_fld-FIELDNAME = c_fld.
    append: w_opt to i_opt,
            w_fld to i_fld.
    data i_control type STANDARD TABLE OF BBP_CONTROL_RECORD.
    **&&--Get Co code from ECC (CSKS table)
    CALL FUNCTION 'META_READ_TABLE'
      EXPORTING
        QUERY_TABLE          = c_table
    *   DELIMITER            = ' '
    *   NO_DATA              = ' '
    *   ROWSKIPS             = '0'
    *   ROWCOUNT             = '0'
        LOGICAL_SYSTEM       = v1_logsys
      TABLES
        OPTIONS              = i_opt
        FIELDS               = i_fld
        DATA                 = i_res
        CONTROL_RECORD       = i_control.
    however it is giving me 'Communication Error' while executing this piece of code. I guess the problem here is with passing query to i_opt table. obviously the way im doing this is wrong and it has to be dynamic. Could anybody please give me idea how to execute fm with dynamic query i.e., 'KOSTL EQ COST_CTR' where COST_CTR is cost center and an importing parameter to this.please advise.
    Rgds

    The "communication error" would seem more likely to be a problem with an RFC call - does 'META_READ_TABLE" call another function in the remote system?
    We don't have that function module here (is it SRM?) but you should be able to construct your dynamic "where" something like this (p_kostl is the variable in this example):
      data:
        l_where     type text72.
      concatenate
        'KOSTL EQ_'
        p_kostl      "variable
        into l_where.
      translate l_where using '_ '.  "replace underscore with space
    Jonathan

  • SAP Script - Logical expression in multi lines

    Hi Friends,
    How can I write logical expression in more than one lines in SAP script editor?
    Case:
    I have to write:
    IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND &J_1BPRNFHD-SHPUNT& = ' '
    I am writing in first line
    /:  IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND
    and &J_1BPRNFHD-SHPUNT& = ' ' is not coming in the same line. How to write it in more than one line?
    What I mean is that:
    Can I write like:
    /:  IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND
    /:     &J_1BPRNFHD-SHPUNT& = ' '
    In fact, above is not working. Please help.
    Regards,
    Surya
    but the rest of the things, that is, &J_1BPRNFHD-SHPUNT& = ' '

    I'm not an SAP script expert but this is just a suggestion.
    Write 2 seperate conditions.
    You can replace this:
    IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND &J_1BPRNFHD-SHPUNT& = ' '.
    ENDIF.
    by this:
    IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X'.
    IF &J_1BPRNFHD-SHPUNT& = ' '.
    ENDIF.
    ENDIF.

  • How can I get Log Express to recognize my external keyboard? - NEWBIE

    I'm using a Lexicon Lambda phantom powered converter (I think that's what it's called) to run my Left and Right 1/4" cables to, from my Kurweil master out. Then the USB cable from the Lexicon out, to the Mac. How do I get Logic Express to recognize the Kurzweil so I can record the Kurzweil's on-board sounds rather than using it as a Midi controller?
    Very new to Logic and all of this-any help is appreciated in layman's terms.

    OK - got logic to recognize the Kurzweil keyboard on a new track, I can hear the on-board Kurzweil piano sounds, but Logic is not recording it. what gives?

  • Installing Logic Express 9 on a new macbook

    Hello,
    I bought Logic Express 9 pre-installed on my Macbook back in 2010, and would like to install it on my new Macbook Pro retina (it's running the latest version of Mavericks).
    I still have the install DVD and serial number key that originally came with my Macbook, but since my Macbook Pro doesn't read DVDs, I'm a little confused as to how I could install Logic Express there. I looked for it in the App store, but it seems that only Logic Pro is still available there, and since I have never downloaded Logic from the App store before, I can't recover it from there either.
    Is there a way to transfer Logic Express 9 on my Macbook Pro instead of having to purchase Logic Pro?
    Thank you for your help

    If you still have your old Macbook you could use Remote Disc to install Logic to your new MBP. Here's a video to demonstrate.
    If not, you might consider getting an Apple USB Superdrive like I did. It comes in handy and is quite affordable.
    BTW, be sure to run Software Update immediately after installing LE9 on your MBP because it will not work with Mavericks until you update it to 9.1.8.

  • Using Outboard Gear With M-Audio Fast Track Pro And Logic Express

    My Fast Track Pro has 2 insert jacks on the back where you can run a send and return to use outboard gear. The cable you use has 2 female 1/4" jacks (one is send and the other is return) that go to a 1/4" male jack that you plug into the back of the interface.
    My question is this:
    How can I get Logic Express to send a track through the outboard gear connected to my interface? On the track's output settings in Logic there are "Output 1+2", which run to my monitors I think, and "Output 3+4", which don't have anything plugged into them. There don't appear to be any other options for sending the track. How can I get Logic to recognize the Inserts jack on the Fast Track Pro? I'm running all the latest drivers if that means anything. Any help is much appreciated.

    Thanks for helping me on this. I'm still a bit confused on how to send the channel through the insert. The jacks on the back of my interface are "TRS Output 1+2" (my monitors are plugged into these outputs), a RCA "Output 1,2,3, and 4", an S/PDIF out and in, and then 2 TRS inserts jacks, marked 1 and 2. Each jack does it's own separate send and return which is why I had to buy the cable with the 2 female jacks on it.
    I've been able to use the I/O plugin and get the track to accept a signal from the insert on input 1 (I have a looping pedal running in the send chain and was able to get it to play a loop over top of the audio already recorded on the channel), but am unable to send the recorded track through the fx send. What would I need to set the output to to be able to do this? Thanks for your time.

  • Mac Mini Core Solo with Logic Express 7.2.1 ?

    Hi
    I am just curious to know how well will perform Logic Express 7.2.1 with the new Mac Mini Core Solo.
    Thanks

    Hi
    Guys thanks for the response. I own a trusty G5 which is doing an AMAZING job at the main studio running Logic Pro 7.2.1. Its just I need a small Mac such as the most basic Mac Mini Solo fully expanded memory to be used as a "Musical Notepad" and wanted to know if the recent advances with Apple Intel Mac Minis with faster bus speeds has actually given this model a boost over the previous Mac Mini G4. Surely there must be performance increases.
    Apple Keep it Up!
    Thanks!!

  • Cannot Record Audio using Logic Express 7.0.0 on 13" Macbook

    Help! I have Logic Express 7.0.0 and am running it in on an Intel model Macbook 1.8Ghz, 13''. I do not have an external soundcard. Will this version of Logic Express allow me to record live audio if I do not have an external soundcard? I only want to be able to record & edit a single audio track, so thought I might be able to. I cannot seem to get the 'R' (Record) button to appear despite activating it in the >View< section, so I cannot arm any tracks, and so cannot record. Is there a bug with this version of Logic and the Intel Macs? Do I need to update? If so, what would be the best way to update?
    Regards,
    Lee
    <br>
    Intel Macbook 1.8Ghz   Mac OS X (10.4.8)   No External Soundcard

    I updated to Logic Express 7.0.1 successfully but the problem wasn't solved. Now if I try to update to Logic Express 7.2.0 it says that it cannot find the correct version of Logic Express. Im not sure how updating works - Can Logic Express 7.0.1 be updated to Logic Express 7.2.0?

  • Loading Logic Express 9 onto replacement MB pro

    I've just had to replace my MB pro through the house insurance after a drink got poured over the old one!
    I have a Time Machine so I'm guessing all my files should be stored but I'm wondering about programs like Logic Express 9 and Microsift Office.
    I'm pretty sure the MS Office disk has 5 licences so no issue there but how do I restore Logic Express 9 as I'm guessing the Time Machine won't copy the program across, only the relevant files?!?
    Thanks

    I appreciate the response!
    I was reading some more and kept having the same problem. I ended up re-installing it a third time, then downloading the update, and finally got it working.
    Something just was weird with this.
    But got it going!
    Thanks!

  • Deleting plug ins + Logic Express

    Hi I have recently bought Logic 8 studio and dont need logic express 7. i cant seem to delete the entire program. does anyone know how to completely wipe Logic express 7 from the system drive?
    also im using Toontrack's DFH Superior drum sample plug in. i dont need this anymore and would like to uninstall this too. how do you unistall audio plug ins on a mac?
    cheers

    Josh since I've never used Logic I really can't say. I did however find this:
    Another approach you might consider is reinstalling Logic Express. To do this effectively, you need to remove the application and its receipts, then install Logic Express and use Software Update to install additional updates. You don't have to remove everything that was installed with Logic Express. Follow the steps below to completely reinstall a fresh copy of Logic Express. Note: Make sure that you have your installation discs and serial number handy before starting this.
    Open the Applications folder.
    Drag the Logic Express application to the Trash.
    Go to /Library/Receipts.
    In the Receipts folder, select the "Logic Express.pkg" file.
    Choose View > as List to view the contents in a list.
    Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Logic Express.
    Drag the Logic Express.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the Logic Express.pkg's modification date.
    Click the Name column header to sort the list alphabetically.
    Drag any other receipts whose names begin with "Logic Express" to the Trash.
    Insert your Logic Express installation disc and install Logic Express.
    When finished, use Software Update (under the Apple menu) to update your software to the latest version.
    It concerns removing Logic Express and reinstalling as a troubleshooting measure. However I would assume you could use it as a guide in just plain uninstalling.

  • How to create an ABAP Query with OR logical expression in the select-where

    Hi,
    In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
    Please help me on this.. Points will be rewarded.
    Thanks a lot.
    Regards,
    Question Man

    Hi Bhupal, Shanthi, and Saipriya,
    Thanks for your replies. But that didn't answer my question.
    Bhupal,
    You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
    Shanthi,
    Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
    Saipriya,
    Like what I have said, this is a standard SAP code so we can't do your suggestion.
    I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
    Thanks a lot.
    Points will be rewarded.
    Regards,
    Question Man

Maybe you are looking for