How to modify a face with Motion 5

How do I add a tooth which moves and disappear when the mouth is closed?
And how do I change the colour of the teeth, so that looks better.
How do I make a face younger? And with some makeup as well.
The video that has to be modified, is the face of a old woman.

Thank you, mhm ya I think that post-editing the movie frame by frame could be a solution, but it would be 7700 frames...
Anyone does have a better idea? I think that Motion can at least do something to make the teeth transparent and then I can add a back layer which can add a white kind of colour everywhere this black hole appears, does somebody knows how to do that?

Similar Messages

How to use ADF Faces with struts1.3.8

Hi
Can anybody guide us how to use ADF faces with Struts 1.3.8.
Your help will be appreciated.
Thanks
Chetan

Xpp,
Have a look at the ADF Developer's Guide for specific instructions on menus (the ADF Developer's Guide for Forms/4GL Developers has the information in section 19.2).
You can put javascript handlers on the components to get keyboard event handling.
John

Hi, I just watched a Collin Smith How to Hide a Face with AE video. I'm stuck on mask movement size

I created the mask successfully and I can get it to follow the face while hiding it... but as the person moves away, I'd like to change the mask to a smaller size to avoid covering more than the head.
Here's the video: http://tv.adobe.com/watch/no-stupid-questions-with-colin-smith/how-to-hide-a-face-in-after -effects/
Here's the question I left for Collin Smith:
Hi, your video was extremely clear and I followed along well. My one question is... what if the person moves closer and further away. When the person is close my mask is perfect, but as they move away it becomes too large and covers shoulders and back. Is there anyway to adjust the size of the mask like we do the position as he moves? Thanks again.

AE Basics
Keyframe the mask path.

How to modify Fileadapter filename with val from JMS msg using xsl?

In my case I need to name the file based on information received in a JMS message.
I would like to receive an xml document from a JMS queue, the document will contain content as well as the name of a file to be saved off. I found references to something similar in the BPEL and ESB documentation for the file adapter by using "ehdr:setOutboundHeader(" as a means to set the outbound header value but I cannot find the mechanics of how to accomplish getting that set with a value that is selected from an incoming message in XSL code.
The examples shown indicate the creation of a pass through mechanism that would take a message from a request header and pass it along to the outbound header which is great but I need a snippet of code to get me through setting the outbound header with an element value that is sourced from the inbound message.
I also found an incomplete reference in a "Oracle SOA Suite Enterprise Server Bus" powerpoint presentation that indicates JMS custom properties support for "Property[@name="Country"]/@value" but no details were provided to assist further.
I would greatly appreciate any information you can provide.
Thank You,
John

Ok I was able to get fileadapter filenames modified.
First you cannot do this after a dbadapter query as that functionality seems to be broken. The best way to solve it for me was to simplify the problem, I started with placing the setoutbound header data after reading a simple file and ignoring the files content altogether. I do the set inside a match of the xslt using a constant value, again for simplicity. For the test just put in 'ateststring.txt' in the setoutbound header call, no need to select data from the document at this point; we will get to that. Now get that to work.
Once you have that working take a value from the incoming document and select it into a variable named myvariable then replace the 'ateststring.txt' with $myvariable. So basically its a three step process for the final solution. Select the data of interest from the document into a variable. add a select statement to make the method call just after that. Make the method call inside the select statement and prepend the variable name with the $ symbol.
So far I have only tested this file to file and file to ftp, I suspect that jmsadapter to file will work fine too. So the trick for me was to understand that if an incoming document is the result of a query that just wont do. My requirement was to take an input JMS request, use that to drive a query, take the data from the query and write it to a filename as defined in the JMS request. No matter what I did to set the frustrating fileadapter/ftpadapter filename in the header I was unable to do so. I used constant strings etc in every part of the document ( before select, inside select, outside select etc ). It wasnt until I went file to file that I was able to get this to work at all. And then not in the xslt header etc, it MUST be in an area of the document that resulted in a select match, which after review makes sense.
To work around the query to file issue, I place the results of the data query into a temporary filename%SEQ%.tmp, along with the query results I add the real filename inside the document. I have a file listener that listens for the filename using wildcards filename*.tmp, it takes the file reads it in, pulls the permanent filename from the incoming document, and sets that filename in the header using the steps worked out above by selecting the filename into myvariable.
You cannot ( to my knowlege ) store variables in ESB so I found I had to put them inside the documents to move the data around. When I am all done with the work through the routing service I strip out the variable data fields that I needed to carry along with the data.
I hope this saves someone else a bit of frustration!
John

How to modify hierarchical data with JavaAPI?

Hi
we have a hierarchical structure for "Categories" of products. Its a simple Table of type "Hierarchy".
Now I need to add new entries to the Tree, or move existing entries to some different parents. But I can neither find a command like ModifyHierarchyTree nor is there a method to set the parent record on a HierNode instance.
How can I set the parent node of a hierarchy node with JavaAPI 2?
(Patch level is 5.5.42.65)
Thanks in advance!

Hi Roger,
I think you can modify the Data Groups hierarchy directly from within the Add Objects dialog, by clicking the Edit button to open the Edit Data Groups dialog and then using the context menu as in any editable tree to add siblings and children, and to delete and rename existing nodes
You can also edit the Data Groups hierarchy by choosing Objects ® Edit Data Groups from the main menu.
Whereas other trees allow non-unique node names as long as sibling nodes do not have the same name, data group names must be unique across the entire Data Groupshierarchy.
Hope it helped.
Regards,
Krutarth

How to modify master data with BPS

Hi experts,
Our customer would like have the posibility to enable/disable the materials they are using for planning.
Disabled materials should not be available for planning.
To do that we are thinking in adding another characteristic into the cube as a flag to determinate which material is enable or disable, and later use that infoobject to filter the planning layout.
We wonder how can we change the values for a characteristic using BPS. Is that possible? So far, we are only able to modify keyfigures.
Thanks in advance,
Pablo

To disable a material from getting planned, proceed as follows:
1. Have material in the area and also in level and package.
2. Create a data slice on material and set the material that you wish not to be planned by the planners and save the model.
This configuration will meet your requirements.
Ravi Thothadri

How to modify an infotype with a tax number

Hi,
I need to implement a newly introduced personal tax number to our employees. Using the tx SE16 I have examined the table PA0002 containing the "Personal data 0002" infotypes and found that there's a field PERID of type CHAR 20 that we're not using and that can serve well to contain the new tax number.
As instructed elsewhere on this forum I tried to use the tx PM01, 3. tab - enhance standard infotypes, clicked on button "create all", confirmed to create CI_P0002, new entry: short text "...", component PERID, component type PRDNI. The activation resulted in an error "Field PERID in table PS0002 is specified twice. Please check". Now the tx SE16 started to crash until I renamed PERID to ZOIB, but clicking on the button "assign enhancement" still doesn't seem to produce any result (the test button still displayes the same user interface).
I will appreciate any suggestion, (except "call your abaper"), since I don't have one.

Marko,
Please do not modify the standard fields in the standard infotype like that.
If you are not currently using the field PERID foer any purpose, you can just start using it without any further modifications using PM01. Please undo all you have done to ZZOIB fields.
It is a configuration to hide or unhide fields in T588M.
Go through the IMG for best results.
Personnel M<anagement> Personnel Administration>Customizing User Interfaces> Screen modifications
the above from memory, so the names of the nodes may be slightly different from what I have written.
Hope this helps.

How to modify DTS packages with minimal changes?

Hello All,
Our client have around 500 DTS packages. Each package loads the data in a file into SQL Server 2000 database. Due to some changes in thier transaction systems, now we will receive more than one file (as of now 2 files) with same structure (and different
file name) that needs to be loaded into same table in SQL Server 2000. In the destination we are expected to add a new column which identifies from which file the particular record was loaded. Currently, the DTS packages have a configurator task which is configured
with file name (using INI file).
We are expecting to do this with minimal change in DTS packages so that the existing functionality is not affected.
Please suggest me with some inputs to achieve this?
Thanks in advance.
Ganesh S

AFAIK, only manual changes available in DTS for its packages being binary objects.
Arthur My Blog

How to modify internal table with new value after data processing

Hi,
My code is as below:
LOOP AT i_raw INTO wa_raw.
   IF ( wa_raw-/BIC/ZOUASCLS = 'BA') OR ( wa_raw-/BIC/ZOUASCLS = 'CO' ) .
      LOOP AT i_crrs INTO wa_crrs.
        IF wa_raw-/BIC/ZOUIDCIF = wa_crrs-ZCBGCIFNO.
          wa_raw-/BIC/ZOUINDAP = '03'.
        ELSE.
          wa_raw-/BIC/ZOUINDAP = '02'.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDLOOP.
Initially column /BIC/ZOUINDAP is empty and I want to populate either value '02' or '03' as shown above.
How do I insert those values into each i_raw records ?
Pls help!

Hello,
try this code:
IF ( i_raw-/BIC/ZOUASCLS = 'BA') OR ( i_raw-/BIC/ZOUASCLS = 'CO' ) .
LOOP AT i_raw INTO wa_raw.
WHERE wa_raw-/BIC/ZOUIDCIF = i_crrs-ZCBGCIFNO.
IF SY-SUBRC = 0.
wa_raw-/BIC/ZOUINDAP = '03'.
ELSE.
wa_raw-/BIC/ZOUINDAP = '02'.
APPEND wa_raw INTO i_raw.
ENDLOOP.
ELSE.
i_raw-/BIC/ZOUINDAP = ' '.
ENDIF.
Hope it helps.
Best regards.
Simone.

How to modify DataBase Table with an internal Table

Hi, Friends.
I am coping Data from a Database table to an internal table after modifying data in the internal table I want to modify the db table according to the modification in the internal table. can some one help me out in this way, i am doing this modification in Table Control in Screen programing.
My Code is as follow.
MODULE zfsl_stinf_tc_init OUTPUT.
IF tc_copy IS INITIAL.
    SELECT * INTO CORRESPONDING FIELDS OF TABLE it_zfsl_stinf FROM zfsl_stinf.
    tc_copy = 'X'.
    REFRESH CONTROL 'TC_FOR_ZFSL_STINF' FROM SCREEN '0001'.
ENDIF.
ENDMODULE.                 " zfsl_stinf_init OUTPUT
*&      Module zfsl_stinf_tc_move OUTPUT
      text
MODULE zfsl_stinf_tc_move OUTPUT.
MOVE-CORRESPONDING wa_it_zfsl_stinf TO zfsl_stinf.
ENDMODULE.                 " zfsl_stinf_tc_move OUTPUT
*&      Module STATUS_0001 OUTPUT
      text
MODULE status_0001 OUTPUT.
SET PF-STATUS 'ZFSL_SCREEN_1ONLY'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module zfsl_stinf_tc_modify INPUT
      text
MODULE zfsl_stinf_tc_modify INPUT.
MOVE-CORRESPONDING zfsl_stinf TO wa_it_zfsl_stinf.
MODIFY it_zfsl_stinf FROM wa_it_zfsl_stinf INDEX tc_for_zfsl_stinf-current_line.
_*"" here i have the modified internal table " it_zfsl_stinf "*_
ENDMODULE.                 " zfsl_stinf_tc_modify INPUT
Kind regards,
Faisal

Hi
Here you are modifying your dbtable in module pool programming
so better to use work area to modify the database table
example:
data: itab type table of zfsl_stinf .
data: wa_itab type itab.
select single * from zfsl_stinf INTO itab WHERE <condition>
(pass your values to wa_itab.)
modify zfsl_stinf from values of wa_itab.
Regards
Srinivasu

How to stop frequent crashing with motion

I am working in Motion 4 on a complex video graphic animation. The program has begun to crash more and more frequently. Last week I could not enen open the file I was working on without crashing the program. I reverted to an earlier version of the file, but now it bas begun to crash almost as soon as I begin to work. I already deleted and re-installed Final Cut, but that has not cleared the problem.
I am working wit this system set-up:
Model Name:          Mac Pro
Model Identifier:          MacPro4,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.93 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          8 MB
Memory:          22 GB
Processor Interconnect Speed:          6.4 GT/s
Boot ROM Version:          MP41.0081.B07
SMC Version (system):          1.39f5
SMC Version (processor tray):          1.39f5
Serial Number (system):          H09362KX20H
Serial Number (processor tray):          J593004ZP1LUE
Hardware UUID:          19EB3603-F036-55A8-8CFF-1BDCE5548C18
ATI Radeon HD 4870:
Chipset Model:          ATI Radeon HD 4870
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x9440
Revision ID:          0x0000
ROM Revision:          113-B7710F-176
EFI Driver Version:          01.00.318
Displays:
Cinema HD:
Resolution:          2560 x 1600
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          CY608068UG1
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Adapter Type:          Apple Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version:          1.01
Cinema HD:
Resolution:          2560 x 1600
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          CY9230TRXMP
Mirror:          Off
Online:          Yes
Rotation:          Supported

Keychain - OS X Mavericks v10.9.1: Repeated prompts to unlock "Local Items"
Try resetting the original keychain.
Keychain Reset
Keychain Issues - Resolve see post by Kappy

How to modify file name with the press of a radio button

Hello,
I have a simple task that I am having some trouble completing. This is what my program is doing:
My VI takes 3 angles between -180 and 180 and computes the XYZ coordinate using a mathscript node. Then every time I press Trigger, the current 3 angles and their corresponding XYZ coordinate are written to a spreadsheet file.
I need to tweak the VI some more to accomplish the following:
The first time I select the radio button Point (or Line), I would like the spreadsheet file name to be "Point001" (or "Line001"). Then I want to press the Trigger 10 times, write to that file just created, "Point001" (or "Line001"), and after the 10th Trigger, I would like the radio button Point (or Line) to become automatically unselected.
The next time I select the radio button Point (or Line), I would like the spreadsheet file name to now be "Point002" (or "Line002"). Then I want to press the Trigger again for 10 times, write to that file just created, "Point002" (or "Line002"), and after the 10th Trigger, I would like the radio button Point (or Line) to become automatically unselected, again.
And so on...
Basically, I am trying to increment the filename Pointxxx each time I select the radio button. I want to write to that file 10 times, at which point the radio button Point automatically becomes unselected.
I hope it is clear to what I am trying to do. Any help would be appreciated.
r15
Attachments:
Untitled 1.vi ‏67 KB

I attached my working VI.
Now, the problem is that Trigger is saving to a different file each time as opposed to having the 10 Triggers save to one file.
This is what is happening now:
When I have the radio button Point (or Line) selected:
Trigger (1st time) saves to "point1" (or "line1")
Trigger (2nd time) saves to "point2" (or "line2")
Trigger (3rd time) saves to "point3" (or "line3")
Trigger (10th time) saves to "point10" (or "line10")
Then, Point (or Line) is deselected.
What I need is the following:
When the radio button Point (or Line) is selected
Trigger (1st time) saves to "point1" (or "line1")
Trigger (2nd time) ALSO saves to "point1" (or "line1")
Trigger (3rd time) ALSO saves to "point1" (or "line1")
Trigger (10th time) saves to "point1" (or "line1")
Then, the radio button Point (or Line) is deselected.
Next time I select Point, I want the Triggers to write to "point2".
Can you fix this for me?
Thank you
r15
Attachments:
Test.vi ‏71 KB

Can any one tell how to modify the PO that is being sent as an email?

Hi,
Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
First of all I would like to know the name of the userexit where this PO is being sent as an email.
It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
Thanks,
Krishna

Eswar,
Thanks for your email.Can you please be bit clear.I am new to this area.
Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
Please give me clear solution.
Thanks,
Krishna

Did anybody used ADF Faces with Apache Struts?

Hi
Can anybody give some guidelines of how to use ADF Faces with Struts?

I think you'll get a better answer for this on an iBatis forum.
I think I knew one customer who used this combination.
We don't have a specific tutorial that shows you how to use iBatis with ADF Faces, but at the end of the day any of the tutorials we have that shows you how to use POJO or a session facade to front POJO will be applicable to iBatis.

How do I get Faces in iPhoto to appear on my 2ed gen Apple TV. The appear on my 1st gen Apple TV with Photos and Events.

How do I sync Faces in iphoto to iTunes and then to my 2ed gen Apple TV so I can show Events,Photos or Faces on my TV? On another TV which I have connected a 1st gen Apple TV all three appear, so some how the 1st gen is sync'ing with itunes but not so with the 2ed gen Apple TV as I ony get Events and Photos on the TV screen.

To choose which photos to show on your Apple TV
File > HomeSharing > Choose Photos to share with Apple TV
The dialogue box that opens lets you select what photos to send over

How to modify a face with Motion 5

Similar Messages

Maybe you are looking for