How to modify a variant

How to modify the variant for a batch job, which is to include 2 countries for a job. Please let me know the tcode.

use t.code SM37.
Enter the job name and execute. Then in the output, check the job and click on step button. Keep the cursor on the program name for which you want to change the variant. Then go to menu Goto->varinats.
Click on the values button at the top. There you can change the values. Once changed click on save button.
Alternatively you can use t.code SE38, enter the program name here. Then execute. Click on the variants button and select the variant. Then change the values and click on save button. By this way you can overwrite the variant value.
Regards

Similar Messages

How to use Transaction Variant

Hi all,
Pls tell me how to us Transacton Variant step by step. I have just created Transaction Variant from TCode PB10 but I don't know how to use it.
I want to change some fields on PB10 screen.
Thanks so much for your supports,
Quang,

Hi,
See if this link helps.
http://www.mhn-consulting.com/Security/transactionvariants.htm
Creating a variant transaction is a better option. If PB10 now works like the modified screen try to deactivate the transaction and create and variant transaction.
Regards,
Soujanya.

FP-CTR-500 and Frequency Measurement: How to modify it to report the frequency (0-10 Hz) every one minute?

How to modify "Frequency Measurement" to report the frequency every one minute?
The signal frequencies vary from 0 to 10 Hz (see the analog output plot and attached sample data file), so I want record the average frequency every one minute.
Software: Labview 8.5
Hardware: FP-CTR-500
Program: "Frequency Measurement" --build in and under "NI example finder", It was attached with this message.
Physical wiring: (1) The signal I want to measure to count input 1 (pins 2 and 18). it is a pulse signal (range from 0 to 1 V, see the plot and attached data file).
(2) Wire Output 0 (pin 130 to gate 0 (pin 9). Do com pins 26 and 30 need to wire together?
FP-CTR-5000 was set up in Max based on the program instructions. I have tried different gating pulse frequency, my readings are always "0".
Attachments:
H2O_20130809.xlsx ‏18 KB
Frequency Measurement.vi ‏35 KB

CTR-500 high pulse is >=10V. Hence, it always read your pulse as low. With this low voltage pulse, you must use analog input module, and write a program to read pulse from analog level. You must also make sure that you pulse is not so narrow that cFP loop is not fast enough to capture voltage change.

MMPV - Close period - How to create a variant

Hello all,
Transaction MMPV is used to close the MM period and open a new one. Currently, we run this transaction every month MANUALLY.
We would like to create a variant that will open the new period automatically every month. The only problem is the period / year that changes every month (I do not know how to create a variant with changed values - if it is at all possible).
How can we create a variant that will run every month to close the MM period ?
Thanks for your help,
Isaac

Hello Isaac
It is possible......But to make it happen you need to go with date field and not with Period and year.
Steps -
1 - Enter field FROM Comp Code and TO Comp Code
2 - Enter the date (E.g - 05-Mar-2007)
3 - Save as varient....Give the varient names as required.
4 - Activate the 4th checkbox (Selection variable) in front of date field
5 - Click on button 'Selection variable' at the top of screen.
6 - Click on YELLOW light. This will turn it GREEN. Now you have 1st light as YELLO which was previously yello.
7 - Click on the down arrow just below the yello light.
8 - Select the appropriate option and save the varient.
The day of batch job scheduling depends upon the options you selected in the 8th step.
I hope it clarifies your dought and will allow you to create the varient as per your requirement.
Best Regards
Avinash

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

How to modify a pdf?

how to modify a existing pdf document?

Hi kewme5798,
You can edit a PDF file if you have the Adobe Acrobat software
1. Open Adobe Acrobat. From the File menu select "Open." Browse to the document you wish to edit and double-click the file to open it.
2. Add or remove pages by selecting the "Tools" menu on the right-hand side of the page. Select the "Pages" option. Choose the appropriate action: "Insert from file," "Delete," "Extract" or "Replace," to name a few options. For example, to add pages from another PDF file, click the "Insert from file" option and select the file you wish to insert. Follow the prompts to tell Acrobat where to insert the additional pages (before or after the existing pages) and click "OK." Delete pages by the clicking the "Delete" option and highlighting the pages you wanted deleted from the PDF file.
3. Edit the text within the pages by selecting "Tools," "Content," "Edit Document Text." Highlight the text you need to edit and type in the new text.
4. Click on "Tools," "Content" and "Edit Object" to move objects around on the page, resize them, flip or rotate them. You can also edit the size and orientation of images and text boxes using this option.
5. Complete the necessary editing, proofread your changes and click "Save As" from the File menu. Name your document something to indicate that it is a revised version of the original document and click the "Save" button.

How to modify a lookup field-type to use checkbox instead of radiobutton?

How to modify a lookup field-type to use checkbox instead of radiobutton?
I would like to modify the behavior for the lookup field.
Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are listed as radiobutton items. Therefore you can select only one at the time to be added.
Is it possible to have the items to be listed as checkbox instead? So that you can check multiple items and therefore be able to add multiple items at the time?
For example:
To add the user to 10 different groups on MS-AD.
It is desired to have the ability to check multiple groups to be added instead only one at the time.
My client would like to use this feature in many other situations.

Displaying will not be a big deal but with that you have to customize the action class and its working as well.

How to modify a column name & How to modify a constraint name

How to modify a column name?
How to modify a primary key constraint name if the pk has been referenced by another foreign key?
Thanks.

Hi,
What version of oracle are you using? If it is 9i,
then you can the command
alter table <table_name> rename column <column_name> to <new_column>;
if it is 8i or earlier, you can create a view with the required names.
hth
Always post the oracle version and the platform you are using to get better response.

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to delete the variant in report

Hi Friends ,
i am unable to delete the Variant from the Report.
please find the error in attached screen shot.
Regards,
Muralidhar.

Hi ,
You can check weather variant is protected or not in table VARID and field 'Indicator' by passing your variant name in field 'Variant'..
https://help.sap.com/saphelp_nw70/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
please check this link it shows how to make a variant protected... ex: if you create a variant and make it protected then only you can make the value changes in that variant it won't allow other users to make changes in the values.
RSVARENT this is the program which cancels the protected variants..
Regards,
Nitin

How to use the Variants in SAP Transportation and what is its use ?

Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
Shakti

Hi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan

How to modify the text in login page?

In login page , there are some lines text:
This network is to be used only for legitimate business purposes. If you are not authorized to have access, do not enter this network. By entering the network, you agree to maintain its confidentiality and not to disclose or misuse the information contained in the network and you further agree to our monitoring of your use of this network.
How to modify or delete these words ?
Thanks

This text is not a translation managed in the DB. you can modify the aspx page, directly. web\webcommon\login.aspx

How to create a variant

Hi :
I developed a BDC program using call transaction, and also a tcode for this program.How can i add variants to this tcode.
from se38 when i enter program name and from menu bar im selecting variants tab, here im creating a new variant and saving it.
But when i execute my tcode, in selection screen i am not seeing variant option.
Do i need to add any code for creating a variant in my program?
Thanks.
Raghu

Hello,
CALl the Transaction U have created fro the BDC. It will show the selection screen. There u fill the data for the field and SAVE button will be there in the menu click it will ask for Variant name give it and save.
If useful reward.
Vasanth

How to create a variant and execute a Z-program in background

Hello,
I have created a specific transaction to update relationships between partners (BP).
For this i have create a screen painter, but as the run time is long i want to execute the program in background.
How to save a variant and to execute the report in background ?
Thanks in advance
Christophe

Hi,
Please go to your z-transaction.
Enter your selection criteria. & click on save button to save your your selection criteria as a variant.
Now go to tcode SM36 to shedule your program with saved variant.
Regards,
Narendra

How to create a variant in ecatt?

Hi all,
I am new to Ecatt scripting. I hav a requirement from the user, that one ecatt is used for two sales org using two variants.
I recorded as per the requirement ( first i created one basic script and called it in a master script ). Now I need to create two variants for the master script for the sales org.
So could any one suggest how to create a variant in ecatt?
Thanks in advance.
Vijayakumar.G

Hello Vijay,
After recording parameterize everything whatever you want.
In parameterization table leave the value field as empty, I mean don't give any value.
Select the following in the menu,
Utilities>Test configuration>Create
Now, test configuration name will have the same of the test script name.
Provide the details in the configuration tab. Then in the variants tab select the second radio button "Internal variants".
In the variant table you can see the default variant "ECATTDEFAULT". You can make use of this also. Otherwise you can also create your own variants by clicking "Insert variant" button.
The variables whatever you have created in the test script will be there in the table. Now, Create variant and provide values for each variables.
You can also select the variants which need to be executed.
Now you can run the test configuration. It will be running number of times according to the created number of the variants.
You can also create Test data for your test script and configuration.
Try this, I hope it will help.
Feel free to reward if it helps.
Regards,
Gopi
Edited by: Gopinath K S on Oct 7, 2008 7:37 AM

How to modify a variant

Similar Messages

Maybe you are looking for