How to modify and create delivery FM

Hi,
i want create and modify delivery´s with FM or BAPI, is posible? existing this functions?
now i modify and create by Batch-input but is very slow.
Thanks,

There is function module BAPI_DELIVERYPROCESSING_EXEC.

Similar Messages

How to modify and Run Dashboards

Hi Friends,
As per the requirement I have to do small modifications and run dashboards , I never work with dashboards.
Kindly suggest me how to modify and run dashboards
Regards
Anjali

Hi Anjali,
We can definitely create dashboards using WAD. We are so involved with BO now a days that I forgot about this option :).
Anyways, there is an article which gives a lot of ideas regarding how we proceed using WAD to create dashboard -
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60af3f6c-8501-2c10-57bc-e11d9f6d69b6?QuickLink=index&overridelayout=true]
Hope this helps.
Regards,
RahulM

IPhoto won't open. Modified and created dates say 12/31/69

iPhoto won't open. Modified and created dates say 12/31/69. Help! OS is Tiger. Older G4 Powerbook.

As a test launch iPhoto with the Option key held down and try to create a new, test library. Can you? If you can then your current library is damaged and needs to be repaired.
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download IPhoto Library Manager 4 for OS XC 10.6.8 and iPhoto 8.1.2 and later or iPhoto Library Manager 3 (for OS X 10.5.8 and iPhoto 7.1.5 and earlier) and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu (iPLM 3) or Library ➙ Rebuild Library menu (iPLM 4) option.
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

Modify and create new partner function in MM

Hello to everybody = )
Recently I was asked to copy from one cliente to another most of the customizing for the MM module. When I arrived to the PF step for vendors I had a couple of problems.
First, some of the standard Partner Functions were modified and some other were created. When I try to delete and then save the PF
AP Contact Person AP
TO
PC Contact Person AP
The systems tells my that the PC value is not valid in the V_TPAR table.
How should I change this PF in order to continue with the customization steps.
Regards.

I just find our the answer to my question = )
Regards!

Migrate from File Server Shared Drives to Document Libraries, while Keeping Modified and Created Date

I am doing some file migration for a client, using SharePoint 2013 on prem.
Whether copying files from a local or network drive, to a Document Library, or from Document Library to other Document Library, I want the option of
preserving file dates and created/modified by fields.
I am developing a pretty cool tool in Excel to analyze files and directory names for restricted characters, large file sizes, and long path names...and then
it generates copy commands or rename commands as desired. I will share this with you if you like. This little glitch is the last remaining barrier.
Can we copy and retain Modified/Created Data and time? Can I do this using xcopy or robocopy or do I need to use powershell, ShareGate, or some other tool?
I have tried Windows Explorer drag-n-drop, "robocopy /COPY:DAT" and "xcopy /k"
and these seem to work great in th CMD window until you display the resulting files in SharePoint...and the modified date shows as now and modified by
shows as me.
Any suggestions you can provide are most welcome.

Hi Gerry,
try content matrix it gives you free 25 GB and it keeps metadata
http://www.metalogix.com/Products/Content-Matrix/Features.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

How to delete and create the CCM MASTER CATALOG in Catalog Content?

Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
Any help provided will be really appreciated.

Hi,
Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
Regards,
Jason

How to compile and creat JAR with native function

Hi there,
I wrote some native function for J2ME. But it seems like using J2ME wireless Toolkits, we can not compile native function. Is it right?
Is anyone knowing how to compile and make JAR with J2MEWTK or command line?
Thanks,
Merry Christmas!!

[zack327],
JNI like or native interfaces APIs is not supported in the CLDC/MID Profile 1.0 specification. If you have J2ME code that includes JNI code, the J2MEWTK tool will not compile successfully for you.
To package the compiled code to a MIDlet suite .jar file, use the 'Package' command in the J2MEWTK toolkit. It is found on the top menu bar 'Project' option as item on the dropdown list.
To package the MIDlets into a MIDlet suite .jar file from the command line, you can execute the usual jar file command:
jar cf MyMIDletSuite.jar Midlet.class
You will also need to create a MIDlet .jad Application Descriptor file as well.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to modify and compile SDK 4 frameworks file in Flash Builder 4

Hi,
I would like to modify \Program Files\Adobe\Adobe Flash Builder 4\sdks\4.0.0\frameworks\projects\framework\src\mx\core\ScrollControlBase.as file for testing of my application. How do I get FlashBuilder 4 to compile that file and include it into my build.
Thanks
Jerry

You can actually just take the source for that file and put it in your project in the correct package. So create the mx/core/ folders inside the src folder. and then create a new ScrollControlBase.as file with the contents you wish to run.
This is often called monkey patching because the files in your project folder have higher precedence over the ones in the sdk. Allowing you to override them.
Simeon Bateman
Principal Instigator
PNW Rain LLC
[email protected]
503-616-4405

Changing computers but not external hard drive, how to modify and delete catalogs?

Moving my relatively new 2012 Mac Mini from office back home that has LR4 and PS CS6 installed. It has a small LR catalog that I want to delete completely.
Presently at home, I use my MacBook Pro which I want to take "offline" in regards to photo editing, which also has LR4 and PS installed and is attached to an external drive with all my pictures that I want to have recognized by the Mac Mini LR4.
1) Can I just delete (from the Mac Mini) the Lightroom folder which contains the Backups folder, and the following files: LR4 Catalog Previews.Irdata, LR 4 Catalog.Ircat, LR4 Catalog Ircat-journal, and LR4 Catalog.Ircat.lock?
2) How do I create a new LR4 catalog on the Mini to existing picture folders on the old hard drive, which were previously associated with the MacBook Pro?

1) Yes
2) You don't create a new catalog in this situation; you simply move the catalog file from the MacBook Pro to the Mini, then double-click on it.

Completely messed up Raid-Array and Partition! How to delete and create new Raid-Array?

Hello,
I am using Ideapad U310 and tried to clean install Windows 8 and use my SSD as CACHE and Hibernate-Partition.
So, I was able to get to the Intel CTRL+I-RAID Config Menu and there I was able to create and delete my RAIDS.
Unfortunately I did not setup the Partition Size correctly, thus I only have a 50 GB Partition combined with my SSD and my HDD. This is what it looks like in the Intel Storage Manager:
As you can see both, my SSD and HDD appears, but only have small partitions on the right. And Windows 8 only recognizes this small partitions, as you can see here:
And now I am NOT able to get to the Intel RAID CTRL+I-menu before Windows starts, where I could delete this array.
My Partitions are "empty", so I dont care if anything is delete. I just want to use raid with FULL CAPACITY of my harddrives. But how can I delete the RAID Arrays and reconfigure them correctly?
When I change in the BIOS from RAID to AHCI I am able to install Windows 8 again with the whol CAPACITY of my SSD and HDD. But then I will not be able to use the RAID via Intel Storage Manager...
Hopefully someone could help me.
Thank you in advance.

Hi
Please see this thread
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/The-Guide-on-How-To-Reformat-Repartition-AN...
Hope this helps
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

How to modify or create an xml file from a xml dataset

Hi,
I'm using spry framework with xml data sources. It works
nice.
My question :
The user can change some parameters inside my dynamic data
regions. I would like to change these data in the maching xml
files. I didn't find any sample explaining how to do this.
Thank's for your help

B2B adapter? I just want some test data. Finally the setup is going to be such that some xml is going to be posted to the B2B internal channel and then on it will translate and send to Trading Partner.

How to learn and create animation with CC

I need to learn 2D animation to tell stories and lessons on the web. Which apps doI need to learn in CC and where do I start?
I have to say that for a beginner, there is little information on which app does what in CC. I'm talking about without jargon a beginner wouldn't know. Lots of lovely videos praising CC etc. but nothing that says "If you want to create a basic animation use these and start with this one, then to add more setup to this because it adds this and that". At least as far as I can find. I know Creative Cloud is aimed at the professionals., but still, clearer explanations of which app does what would be very nice. Instead you have to click on each one and try to figure out if it does what you are looking for. It would be nice to have groupings, also, like for animations, use these and what each one does. I'll probably be told it doesn't work that way, but justI had to ask.
Thank you.

take a look here:
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Ingo

How to read and create TDM Files in a Java Application?

Hi,
I want to read and write TDM-Files in a Java-Application.
I found the TDMHeaderWriter for Java, that can write TDM-Files, but the reading part is still missing.
Perhaps anyone knows an equivalent in Java to the TDM C DLL and the TDM C Header DLL?
Thanks Verena

Cool
Can you please give me feedback on this project if you have finished it?
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

How do I dynamically name and create arrays?

I need to create arrays dynamically based on user's input. For example, if user enters 5, I have to create 5 arrays. Can anyone please tell me how to name and create them?

So, if you don't know how many arrays to create when you're writing the code, you wouldn't name them. You'd create an ArrayList (or some other collective data structure) and name that, and then put the 5 arrays into that structure.

How to modify and create delivery FM

Similar Messages

Maybe you are looking for