How to modify Date fields in Canada- ROE
Hi Experts,
I have a requirement to change the Block 10 ( First day worked) and Block 11 (Last day for which paid) logic in the ROE letter in Canada Payroll.
Can anyone please let me know how to customize the ROE fields in Canada payroll.
Thanks in advance,
Saurabh
use CMOD
tcode if u want to change feild Label
can u be some wht little clear
Similar Messages
-
Looking for a third party utility to replace a file's "modified Date" field
For video files, apparently the organizer displays the thumbnails with the date taken from the file's "modified date" field. For some wierd reason (which I'm discussing with Adobe CS) the organizer changed the date of all my videos in the "modified date" field, so now the chronology of all my video clips in the organizer went down the drain.
Is there a third party utility to replace the "modified date" field of a file with the original shot date? (which in W7 is shown in the "Date" field).
In other words: for every video file in my library, I want to take the date from the "Date" field and put it in the "Modified Date" field
Thanks for your help.OK thanks.
I've found a utility that modifes several of the date fields.
Now, I just want to be sure that I don't screw this up...
Which of the several date fields of a file holds the actual shot date?
Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
Thanks for your help -
Does Address book has a Last Modified Date field?
Hi
Please can you let me know if Address book has a Last Modified Date field? I'd like to know what date I have last modified my address book records. I checked Preferences but not able to find it there.
Thank you.Sorry, but there is no such field in Address Book. If you select an individual entry in Address Book, you will see to the lower-right an "Updated" field with the date that entry was last updated. This is not true for all entries, but nearly all. There seems to be a point after which you've entered text in the Note field that the "Updated" field will no longer appear when you select an entry, but it's not documented.
-
How to modify the field lengh of file upload
Hi All,
I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
RECEIVING
Element = lv_fileup.
bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.AHi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy -
How to make date fields in CRMD_ORDER as GRAY (i.e non editable)
hi Experts,
i am new to SAP -CRM ,, here i have one queiry related to CRMD_ORDER.
In my requirement at the time of creating the leases in the CRMD ORDER The date option for Build up period should be grayed out means non editable, and it should be available to amend later means when user want change the order in CRMDORDER it should be editable..
is it possible in CONFIGURATION level or we need to modify any BADi's..
please suggest..
thanks in advance..
Best regards,
pradeep.Hi Pradeep,
If u are talking about the date field which are from date pfofile then i date profile u can set the date types as a non-editable (display only) the the user will not able to edit the dates.
Date Profile->Date Types->Screen Areas: Dates->tick checkbox(only display field)
Regards,
DD's -
How to modify Data Template ARXSGPO.xml
We are on EBS 12.1.1. My client want to customize AR Customer Balance Statement Letter. They need rtf to be modified as well as some additional info for which I need to modify Data Template ARXSGPO.xml .
But I am not able to modify above xml file. Update File button has been disabled. Could someone tell me how I can update existing xml file ?
Thanks in AdvanceHi
You could use the XDOLoader command to upload data templates.
http://bipublisher.blogspot.com/2008/01/bi-publisher-xdo-loader.html
But it would be better if you could create a custom report and attach the new date template, instead of modifying the standard report.
Regards
Nishka -
How to modify the field symbol
Hello Every1,
I have a internal table and field symbol with the below structure.
Data : begin of itab occurs 0,
matnr like mara-matnr,
ersda like mara-ersda,
End of itab.
FIELD-SYMBOLS: <Matnr> TYPE STANDARD TABLE.
I have the field symbol with 10 records similar to the structure of itab. (Only matnr is populated and date as initial). Now I need to transfer the date value from itab to the field symbol for the matching matnr.
Please let me know how to do it.
Thanks,
Siva.Sivaprakash,
To my knowledge, a field-symbol cannot hold values on its own. It refers to a field or a table and work directly with the values.
Your scenario cannot be achieved unless there is another internal table besides itab.
Create a field-symbol of type itab2 and compare matnr with itab-matnr.
If a record is found then move the date field to <fs>.
Your code may look like this.
loop at itab2 assigning <fs>.
read table itab into wa_itab with key matnr = <fs>-matnr.
if sy-subrc = 0.
<fs>-date = wa_itab-date.
endif.
endloop
Thanks, -
Hi
I am trying to subtract date fields on oracle 7 database. It is giving me the result as days but I need to have it as day-mon-yyyy hh:mi:ss.
The query is as folllows
select (table2.date2) - (table1.date1) from date2,date1 where table1.order_id = table2.order_id and table1.accession=0110500001 and table2.ord_pend_type_cd = 12300
Both of the date filelds are in Date data type
Some body could help me on this.
Chowdhury<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by MD Chowdhury ([email protected]):
Hi
I am trying to subtract date fields on oracle 7 database. It is giving me the result as days but I need to have it as day-mon-yyyy hh:mi:ss.
The query is as folllows
select (table2.date2) - (table1.date1) from date2,date1 where table1.order_id = table2.order_id and table1.accession=0110500001 and table2.ord_pend_type_cd = 12300
Both of the date filelds are in Date data type
Some body could help me on this.
Chowdhury
From the search, it only returns two matches and it didn't help me. It talked about how to return as day but I need to know how to get days as well as hour, min,ss, month,yy.
Somebody could help me on this
<HR></BLOCKQUOTE>
null -
How to make Date fields Editable or Non-Editable based on Call Staus
Hi,
We are using CRM2007 Web GUI for Service call creation. We are using date profile to populate the dates. Here my requirement is if call status is 'Call created' then some set of date fields to be appeared in display mode(Non Editable) and some set of date fields to be appeared in change mode(Editable). How to achieve this. Kindly suggest me.
Regards,
SteveHello,
Kindly check the following thread which is giving many solutions for your requirement:
Re: how to make field non-editable (display mode)
Kind regards,
Nicolas Busson. -
Hi
I want to reset the Date field of the form.
I hava a search cirtaria in that i have the folling fields
1. Indent No
2. Start Date and End Date:
when i select Indent No: the Start and End Date should be null;
When i select Start Date and End Date the Indent No Should be null.
When i first select Start Date and End Date select search the data displaying between dates
one again i select Indent No the Start date and End date will be like that only
now i want to set Start data and end Date with null or Empty values.
and let me know what is the default value of the Date
regards
mmukeshHi Mukesh ,
To set date to null..
Date d = null;
wdcontext.<Element>.set<dateAttribute>(d);
Regards,
Sunitha -
How to display date field in ALV in format 'YYYY-MM-DD'?
Hi experts,
I am not getting displayed the date field in ALV in the format 'YYYY-MM-DD' if it is different than my user setting's format (DD.MM.YYYY).
Tried with the edit mask
LVC_S_FCAT-EDIT_MASK = '____-__-__' but it does not work.
I could not find the conversion routine for this. Is it possible to write customer conversion routine?
I have to use DATE field, otherwise if I display this format in CHAR10 field , sorting in ALV does not work for this field.
PLEASE ANY HELP!
Kind regards,
DanijelaHi,
Use FM FORMAT_DATE_4_OUTPUT.
TYPE-POOLS : slis, KKBLO.
TYPES: BEGIN OF t_data,
sel TYPE char1,
matnr TYPE matnr,
bldat type char10,
END OF t_data.
DATA: it_tab TYPE STANDARD TABLE OF t_data,
it_fcat TYPE slis_t_fieldcat_alv.
DATA: wa_tab TYPE t_data,
wa_fcat TYPE slis_fieldcat_alv,
wa_layout type SLIS_LAYOUT_ALV.
data: lv_repid TYPE syrepid.
data : lv_date type NLEI-IBGDT,
lv_outdate type RN1DATUM-DATEX,
lv_format type RN1DATUM-FORMAT value 'YYYY-MM-DD'.
lv_repid = sy-repid.
lv_date = sy-datum.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000001'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 1.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000002'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 2.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000003'.
APPEND wa_tab TO it_tab.
wa_fcat-fieldname = 'SEL'.
wa_fcat-ref_fieldname = 'XCHPF'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-edit = 'X'.
wa_fcat-checkbox = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'BKPF'.
APPEND wa_fcat TO it_fcat.
call 'REUSE_ALV_GRID_DISPLAY'' after this
Edited by: Ankur Parab on Oct 1, 2009 2:50 PM
Edited by: Ankur Parab on Oct 1, 2009 2:51 PM -
How to load date field from a remote Oracle DB with DB Connect
Hi,
Does any one have experience extracting Date field from a remote Oracle database through DB Connect to BW? I am experiencing data format issue. The extracted data shows '04-Oct-0' for '10/4/05'. It works fine if I create a view in Oracle database to preformat the data to '20051004'. But, I am not allowed to create view in Remote DB.
Any suggestion is very appreciated.
Regards,
FrankYou have to change it to a varchar2 field. YYYYMMDD. I do not know of any other option.
-
How to validate date fields in the flash form
i want to validate the date fields to make sure the values
are not greater than today's date and from-date is less than or
equal to to-date in the flash form. Does the actionscript have a CF
DateDiff function for the validatation?
ThanksI finally (after much reading up on actionscript) figured out
my problem with date validation...which was similar to yours...
I posted the solution I found for my AS date validation issue
here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=22&threadid=1232361
I hope it helps!!! -
How to read data/fields of the pdf form
Hi,
i want to orchestrate a process where input is interactive forma and output is xml data.
i mean i want to read data/fields of the pdf form.
Which activity do i use on workbench.
Regards
SunilDieter,
I am talking about 3rd senario, where we create one process on workbench, and pass filled pdf as input and then output of process is xml file.
What is the process name here (Like renderPDF process) which extract data from pdf.
regards
Sunil -
How to manipulate Date Fields of MSSQL server
I build a database link from my oracle Database to an sql Server , i can run any select statement that i want with no problem but when i try to run the above :
select empl."emp_id", "emp_code", "emp_first", "emp_last" ,
"empio_dtin", "empio_dtout", "section_id",
to_date ( "empio_dtin" , 'dd/mm/yyyy hh24:mi:ss')
from "dbo.employees"@ATERMON empl INNER join "dbo.empio"@atermon empio on empl."emp_id" = empio."emp_id"
where "empio_dtin" > '05/01/09'
order by "section_id", "emp_code"
i took the message :
ORA-02070: database ATERMON does not support TO_DATE in this context
The problem is the time because when i run the select statement the date fields brings as value only the dates values for example "01/05/09" without the time value that i need most,
i try to insert the values into an oracle table with Date format fields but i take only the dates values again.Is the empio_dtin field defined with a date datatype or a character datatype?? If the field is a date, try using TO_CHAR instead of TO_DATE:
to_char ("empio_dtin" , 'dd/mm/yyyy hh24:mi:ss')
Assuming that empio_dtin is defined as a date datatype, you might want to try directly converting the string '05/01/09' to a date rather than letting Oracle impliciting covert the string to a date.
"empio_dtin" > to_date('05/01/2009', 'MM/DD/YYYY')
Edited by: user1983440 on Jun 24, 2009 9:58 AM
Edited by: user1983440 on Jun 24, 2009 9:59 AM
Edited by: user1983440 on Jun 24, 2009 10:00 AM
Edited by: user1983440 on Jun 24, 2009 11:30 AM
Maybe you are looking for
-
How can i see the opening stock , reciepts , consumption , closing stock for a particular material between a particular period ??/ pls help
-
SVG image does not appear in mobile version but does in desktop version
Hi, I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having. I have used Illustrator to create the following logo image that I save out as an SVG file: As you've probably guessed,
-
I've googled this problem and I can't find anything that seems to apply to me. I'm sure it's come up here, so here is my problem. I keep getting the error that says "Server Busy" "because the other program is busy." I can either press the "Switch To
-
Sample movie order: The Adventures of Buckaroo Bonzai Bella No Country for Old Men Breach
-
Hello Experts, my points are not updating. 3 months before the points were auto updating but its not updating now. I dont know what went wrong. Could you pls suggest what shall I do to update the same. Thank you & BR Venkat...