How to modify installed profile?

I created a profile to our apple users, However, I confirmed a bug about password policy, so I need to remove the password policy, There are someother payloads like mail and calendar account in the profile, and I don't want to remove them.
if I install the updated profile(I am using shell command to install the profile), user mail and other setting will re-initiate , user have to download all email from server. Is there any way to modify the installed profile?

The usual approach is to define the profiles in Profile Manager. Once a device has been 'enrolled' in to Profile Manager you then make it a member of a group to which the profile is to be applied. This causes the profile to be sent to the client device. If later you modify that profile then Profile Manager will automatically send a new version of that profile to the same member devices. When you save the changes it should show a message saying this will cause updated profiles to be sent to devices.
It is therefore not normally necessary to do anything extra to get updates sent to devices.
If however you create profiles using iPhone Configuration Utiltiy or Apple Configurator then these require you to manually copy the profiles to the devices and then you would have to arrange to send them again to the devices. This could be by simply emailing the approriate mobileconfig file.
It sounds like your using Profile Manager so this should not be necessary.

Similar Messages

How do I install profiles 6.6 DNG converter ?

I downloaded the 6.6 DNG converter and when I try to open it I get the following message."Error writing temporary file make sure your temporary files is valid. How do I check temp files and install DNG converter profiles?

See if right clicking on the DNGConverter_6_6.exe and choosing Run as Administrator makes any difference.
(i just tried installing on windows 7 and didn't get that message)

How to modify .bashrc .profile or .bash_profile?

Hi, I'm just getting familiar with unix like systems so excuse me if I annoy anybody!
I'm trying to modify something like the .bashrc, or .profile files in my mac to include some lines that would allow me to run a compiler properly, but I cannot find these files in my directories... (yes I'm using the command ls -a) so I looked it up in the internet and I found some references to modifying the etc/paths file with vim, except that vim won't let me modify it argumenting that it is a readonly file, so I guess I should change permissions with chmod over this file or maybe do it as the root user, but wanted to check if somebody knows a better way or if I'm just doing it wrong!
Thanks in advance.

if they are not there, they dont exist. you can safely create them yourself, in plain text format. the files in /etc are sourced by the shell first, before the files in your home directory, you probably dont need to edit them.

How to modify my profile to get Apple in french

Hi
I would Like to make changes to my profile (pût m'y keyboard. In english)
Thank. You

Settings>General>Keyboard>International Keyboards>Add New Keyboard

How do I install icc profiles? I keep getting message that folder can't be modified.

How do I install ICC profiles on Lion? I keep getting an error message that the folder can't be modified. Any help is greatly appreciated.

If the profiles need to be accessed by all user accounts on that Mac, follow Martin's instructions for getting the main Library folder to appear. In order to place items into the folder, you need the admin name and password before the OS will allow you to add (or remove) any items. It's either that, or you have to copy the same profiles into every individual user account.
If the only user of the Mac is you, then the Profiles folder in your user account will work just as well.

How to modify my linux profile

Good morning all,
I have created a user CSadmin and install collaboration suite under this user.
How can I modify my profile so that when I log in as CSadmin, I get options to choose from (either the infrastructure or the middle tier)?
Thanks in advance.
Message was edited by:
user505765

hi
This seems to be a incomplete question. Please expand more on your query.
How is infra / apps tiers related to CSadmin user.
Above are 2 diff homes. Is this a single box install or multi box install?
Do you want to set homes as soon as u logg on as CSadmin user?
Thanks
Rahul

How do I install a new printer profile on CS4?

Folder system has changed from CS3, and instructions I find on Web don't sync with CS4. I'm working with an Epson R1800 and trying to get illford papers' profiles installed. Suggestions including possible web link for me to follow would be much appreciated.

Hook it up and see if it works. If it is one of the more common printer brands/models, it could very well have it's drivers installed, depending on how your OS was installed. If not, you can always go to the support site for your printer and download the drivers, if necessary.
What kind of printer do you have? What OS and how was it installed?

How do I install Windows 8 via ISO onto a modified MBP 2010 without an optical drive?

I have a modified 2010 MBP without an optical drive. I'm trying to install Windows 8 through bootcamp by creating a USB disk, but Startup Disk does not recognize this USB. How do I install my Win 8 ISO? Thanks in advance

I can kind of help you here. First you will need to find out if your computer can install Windows 8. The following computers can install Windows 8
MacBook Air (Mid 2011 or newer)
MacBook Pro (15-inch and 17-inch, Mid 2010 or newer)
MacBook Pro (13-inch and 15-inch with retina display, Mid 2012 or newer)
Mac Pro (Early 2009 or newer)
Mac Mini (Mid 2011 or newer)
iMac (27-inch, Mid 2010 or newer)
iMac (21.5-inch, Mid 2011 or newer)
Your computer MUST have Boot Camp 5 running on Mac OS X 10.8.3 Mountain Lion or later other wise Windows 8 will not work.
If you don't have one of those computers it won't allow you to install Windows 8. You can try getting a Windows 8 install disc and an external optical drive that supports Mac OS X. I reccomend the Soniq Slim DVD-RW Drive becuase it works with almost every disc including install discs. But before trying to use an install disc with an external optical drive make sure you go into boot camp assistant and remove the partition that you made for Windows. If this didn't help you go to Apple's Boot Camp FAQ for Windows 8. The link is below.
http://support.apple.com/kb/HT5628?viewlocale=en_US&locale=en_US
Hope this helped!

How to install Profiles?

I am a apple developer for Safari, Mac and iOS and I need help with installing profiles. I would like to have my users click a button then it will take them to the settings app and ask if they want to install there devices on my servers. How do I do this? What code do I add to my php page?
I have an iPad 3rd/4th Gen. Xcode and iTunes can't find out which one.
Thanks,
TyCap123

you probably stand a better chance of an answer here
https://discussions.apple.com/community/developer_forums

How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
OT

How do I install a language XPI globally and make it the default language?

I am using Firefox on unices and various Linux distributions (the less common ones). Installing Firefox is easy, but it is always in English. I get most of my interfaces (gnome, libreoffice, gimp, etc) in my preferred translation simply by setting the proper locale (export LANG=xy_XY.UTF-8) before starting Xorg. I found and downloaded my preferred language pack for firefox, which comes in an XPI archive. Opening that XPI file in Firefox (via an URL of file:///path/to/file/langpack.xpi) works smoothly, the translation gets installed under the user's own profile and it shows up in the add-ons (under the new category: Languages). Unfortunately, I still see no way in Firefox preferences to set this added translation as the default. Firefox still starts with the English interface. On SeaMonkey, there is a combobox on the Appearance panel that allows me to select the language of the interface from the list of installed/available languages. I cannot find such option on the panels of Firefox. So far, I had to install a language-changer add-on to be able to set the interface to my native locale. Even though my users never need to switch to any other locales.
Q1., Once a language xpi is installed, how do I set the interface to use that language?
Q2., How do I install the language xpi and make it the system-wide default, so that all my users see Firefox starting with the native (non-English) interface?
I found a handful of description for Q2, but they appear to be outdated and do not work. These include the -install-global-extension argument to Firefox, placing the xpi file as it was downloaded into the "extensions" folder, placing the xpi file renamed to the extension ID into the "extensions" folder, unzipping the contents of the xpi into a subfolder of the "extensions" folder named as the extension ID. Please note, these attempts might have failed because I placed the extension NOT where it was supposed to go. The instructions refer to the global extension folder as <installation folder>/extensions, but on my system no such folder exists. Firefox seems to get installed into /usr/local/lib/firefox and there is no "extensions" subfolder there in. However, there is a "browser/extensions" subfolder, but placing my XPI there did not trigger any effect. Also, I manually created the "extensions" subfolder in /usr/local/lib/firefox and moved the xpi there (on various names, unzipped and in a whole) without the expected result.
Any suggestion is very much appreciated!
My goal is to install the firefox package, then run something from the command line resulting the non-English translation in the downloaded XPI becoming the system-wide default for all users. A step forward would be to know for certain where that "extensions" folder must be on my specific OS. How do I query that?

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

How do I install an Airport card on a G3?

I bought this Powerbook G3 a while ago, with only Ethernet connection, and I finally broke down and bought an Airport card, after trying some of the other stuff! I have the card 90% into the slot on the left back side of my Powerbook but how do you get it all the way in? Without a hammer? LOL It came with an install disc but it says, "you cannot install Airport on this volume (my Macintosh HD). Your Airport software is currently up to date" but in System Profiler "No information found" under Airport card?
My Imac I'm waiting on reinstall discs, from Apple, the 'book hasn't froze in at least 2 - 3 weeks! I have music playing on that I want to migrate here!
Thanks, Willy

WillyBlues,
Please identify your powerbook G3:
http://docs.info.apple.com/article.html?artnum=24604
If you have the Powerbook G3 FireWire M7572 "Pismo", there is an original AirPort card available, but it installs ONLY under the keyboard, not the PCMCIA/CardBus slot on the left side of the 'book, plus it works only in the Pismo. Here is what it looks like and how it is installed:
http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=10061
http://docs.info.apple.com/article.html?artnum=58581
If you have a WiFi PC card, please identify the card and software in addition to what version software you are using.
The PC card on the left side will always extend beyond the frame about 1". You should feel resistance in the last 1" of travel, then you may have to push hard to fully seat it. A PC card icon will then appear in the menu bar. It's possible the PC card slot is in the locked position; read this article on how the slot works.
http://docs.info.apple.com/article.html?artnum=16167

After upgrading to firefox 7, I can't use many of the features on my schools secure website. So, how do I install a previous version of firefox?

After upgrading to firefox 8, I can't use many of the functions on my schools website like opening the textbook and sending emails. I spoke the school's tech. support & they informed me that my version of firefox was not compatible with their system. So, how do I install a previous version of firefox (firefox 6 to be exact)?

You can download Firefox 6.0.2 for Mac OS X 10.5 from ftp://ftp.mozilla.org/pub/firefox/releases/6.0.2/
Backup your '''Profiles''' folder before new installation.
edit: replaced random third-party download site link.

Error 500--Internal Server Error:How to modify req.setReportAbsolutePath

I test a servlet but I get following errors. I use OBIEE 11g and Jdeveloper 11.1.1.3
How to modify the source code and the req.setReportAbsolutePath?
===============error====================
http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
Error 500--Internal Server Error
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
========source code============
package mywebcenter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.DeliveryRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.LocalDeliveryOption;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportService;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceClient;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceService;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportResponse;
import com.oracle.xmlns.oxp.service.publicreportservice.ScheduleRequest;
import java.io.IOException;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.URL;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.xml.namespace.QName;
public class BipServletTest extends HttpServlet {
private static final String CONTENT_TYPE =
"text/html; charset=windows-1252";
private static PublicReportServiceService publicReportServiceService;
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
OutputStream os = response.getOutputStream();
//PrintWriter out = response.getWriter();
String sid = "";
System.out.println("===57===");
publicReportServiceService = new PublicReportServiceService(new URL("http://localhost:9704/xmlpserver/services/PublicReportService"),
new QName("http://xmlns.oracle.com/oxp/service/PublicReportService",
"PublicReportServiceService"));
PublicReportService publicReportService =
publicReportServiceService.getPublicReportService();
//To get a session id
System.out.println("===64===");
try {
sid = this.getSessionID("weblogic", "welcome1", publicReportService);
} catch (AccessDeniedException_Exception e) {
System.out.println("invalid user");
//To generate a report and display it
System.out.println("===72===");
ReportResponse res = this.getReportInSession(publicReportService, sid);
byte[] binaryBytes = res.getReportBytes();
os.write(binaryBytes);
response.setContentType(res.getReportContentType());
public String getSessionID(String username, String password, PublicReportService publicReportService) throws AccessDeniedException_Exception {
String sid = publicReportService.login(username, password);
return sid;
public ReportResponse getReportInSession(PublicReportService publicReportService,
String sid) {
ReportRequest req = new ReportRequest();
ReportResponse res = new ReportResponse();
System.out.println("===89===");
req.setAttributeFormat("pdf");
req.setAttributeLocale("en-US");
req.setAttributeTemplate("Simple");
req.setReportAbsolutePath("E:\\OracleBI_win2008_32_20101206\\user_projects\\domains\\bifoundation_domain\\config\\bipublisher\\repository\\Reports\\Samples\\11g Overview\\W2 2010.xdo");
//req. setSizeOfDataChunkDownload (-1); //download all
try {
System.out.println("99");
res = publicReportService.runReportInSession(req, sid);
System.out.println("101");
System.out.println("===100==="+res.getReportContentType());
} catch (Exception e) {
System.out.println(e);
System.out.println("===107===");
return res;
============Jdeveloper console==================
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application Application4 stopped but not undeployed from Server Instance IntegratedWebLogicServer]
[Running application Application4 on Server Instance IntegratedWebLogicServer...]
[12:45:14 PM] ---- Deployment started. ----
[12:45:14 PM] Target platform is (Weblogic 10.3).
[12:45:14 PM] Retrieving existing application information
[12:45:14 PM] Running dependency analysis...
[12:45:14 PM] Deploying 2 profiles...
[12:45:15 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4\Project4WebApp.war
[12:45:15 PM] WARNING: Connection ApplicationDB has no password. ApplicationDB-jdbc.xml file not generated for connection ApplicationDB.
[12:45:15 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4
[12:45:15 PM] Redeploying Application...
[12:45:17 PM] Application Redeployed Successfully.
[12:45:17 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[12:45:17 PM] http://192.168.1.17:7101/Application4-Project4-context-root
[12:45:17 PM] Elapsed time for deployment: 4 seconds
[12:45:17 PM] ---- Deployment finished. ----
Run startup time: 3547 ms.
[Application Application4 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
===57===
===64===
===72===
===89===
99
javax.xml.ws.soap.SOAPFaultException: oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.xdo.servlet.CreateException: Report definition not found:E:\OracleBI_win2008_32_20101206\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Samples\11g Overview\W2 2010.xdo
===107===
<Dec 8, 2010 12:45:24 PM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 12:45:24 PM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Dec 8, 2010 12:45:24 PM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Dec 8, 2010 12:45:24 PM PST SERVER = DefaultServer MESSAGE = [ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = WIN-IT8WDLG81KH TXID = CONTEXTID = 55211ca27b9d1dfd:bd42a62:12cc7606a10:-8000-000000000000009c TIMESTAMP = 1291841124147
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Dec 8, 2010 12:45:34 PM PST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\administrator\appdata\roaming\jdeveloper\system11.1.1.3.37.56.60\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_12 with a lockout minute period of 1.>

am able to login
http://192.168.75.140:7001/console/login/LoginForm.jsp
from this environment-> servers-> all servers(adminserver,soa_server1, oim_server1, oam_server1) status is running,and health is ok.
I have started these servers from command line <base_domain/bin/sh startManagedWebLogic.sh oim_server1
result is <server started in running mode>
now I shutdown the oam_server1 and oim_server1
again I started the oim_server1 as above
command line result is < <May 30, 2013 7:54:47 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in (http://localhost:7001/console) window oim_server1 status is unknown...

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

How to modify installed profile?

Similar Messages

Maybe you are looking for