How to modify the actual person in the picture?

Well my question is that I have pictures of me and my friends that are taken in dark places. How can I make them more vibrant or brighter per say. I have looked around everywhere for this type of help, but I couldn't seem find any tutorials on it. Basically I just want them to be more brighter in the picture, because the picture is taken with only a 5 megapixel camera aka my iPhone.

LOL - There must be some sort of book, that only wives are allowed to read - maybe secretly handed down from mother to daughter?
To the OP
I use Chris' method often. Because of the way that Shadow & Highlight works, I will first Duplicate Layer (Ctrl+J), apply and adjust Shadow & Highlight there, and then experiment with both Opacity and Blending Modes for that Duplicate Layer.
Then, I will apply Adjustment Layers (usually starting with Levels) to the Background Layer (I always convert that to a regular Layer).
If the Image is underexposed, then you might find that you start really seeing noise (looks a bit like film grain), and I have had great results with Neat Image, a 3rd party stand-alone, or plug-in (your choice). It also works quite well with real film grain (don't see much of that nowadays).
Good luck,
Hunt
PS - note that you can create Masks (starting with the various Selection Tools), to restrict adjustments to JUST an area of the Image.

Similar Messages

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

How to fetch the contact person of the Vednor in SRM

Hi All,
   I need to display the Contact Person of the vendor which is maintained in XK03(contact person(view)).
     ->How to fetch that name in the SRM ?
    ->Is any FM exists ?
Thanks and Regards
Channappa

Hello Channappa,
Contact person is only significant for Bid Invitations.
For Bid Invitations, you don't have a Vendor but a Bidder with one or several Contacts Persons.
So, when you are in BBP_BID_INV transaction, when you look for bidders to link to your bid invitation, you will find their contacts: this is standard process.
In SAP GUI transaction BP, you will see bidder contacts if customizing done to use BBP_VENDOR_SYNC report to replicate vendors is correctly maintained.
Regards.
Laurent.

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

How to set the default person to the person lov

Dear all
i have 2 lov's 1.Customer Lov 2.Person Lov
person lov depend on customer lov9person name should be based on customer id)
in my requirement is i have customer-X is there in these customer i have 10 persons are there
in 10 persons only one primary person is there remaining 9 are not primary persons
when i select the customer X from customer lov at the same time i need to set the primary person to the person lov
if user need to change he will click on person lov he can change the person
in my case companyid and personid's are both unique
how can i proceed
Thnaks & Regards
Sreekanth

Hi Sree,
As per our discussion, you can take following steps:
1. create required LOVs
2. in PFR of the co(base page Co), handle event of first LOV
3. on the basis of the value selected by LOV, run a query to get required Primary Person and assign it to second LOV field.
Hope this will give you some clue.
Regards,
Reetesh Sharma

How can i extract a person from a picture and then animate the person

how can i extract a person from a picture and then animate the person

Basically you select the person using the various selection tools, copy the selection to the clipboard, and paste the selection onto the destination picture. Then use the Move tool to resize/reposition the person as necessary. Here is a tutorial demonstrating this as well as some advanced techniques.
http://home.earthlink.net/~msand42/PSE/composite/

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

TC has not been lost...skimmer shows source TC.
Nanoflash external recorder via SDI on a Sony PMW-EX3.
Ok so Compressor will show source TC on an individual clip, good I didn't know this and it will be helpful.
My scenario. I build a timeline with a whole days shooting involving many different clips and build a Sequence from that-editing out the off camera questions/mistakes etc. In the past I would export with source TC with a Timecode Reader filter applied. Now, it is a TC Generator filter that is available that starts from 00:00.
1. Possible solution, forget the source TC since I have a timeline built with (counter) TC on it and send that to client or get Apple to add it in the future.
2. Apply TC Generator on a clip by clip basis and manually change the TC to match source material. Probably too, much effort though.
Chris

How do I read the actual height of the panel title bar (or actual total panel height)

In Flex 4.5:
I have panel which is reading panel.height as 159, however it contains a swf in a swfloader which is 400 in height so it should be more than 400.
I need to know what the actual height of the panel is so I can scaleX and scaleY it to full screen height eg. scale=screenheight/panelHeight.
I know the content container will be 400 (the size of the movie) but can't read the height of the titleBar, and the overall panel height is returning the wrong value.

Spark Panels don't clip. Maybe that's what is going on? Also check the
measuredHeight of the Panel.

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

Getting the actual size of the result of a query

Hi,
I would like to ask if someone knows on how to get an estimate size of the result of a query on a table. To make it more specific, here is an example.
Let us say I have this table called EMP and it has a column called DATE. I have issued a query like this:
select * from EMP where DATE < to_date('01-AUG-08');
I want to get the actual size of the result of the query in bytes or MB. How would i achieve this without creating another table and transferring the data on it.

You can use SQL*Plus Autotrace to have the data size sent between client and database session:
SQL> set autotrace traceonly statistics;
SQL> select * from employees where hire_date < to_date('01/08/08');
107 rows selected.
Statistics
        430 recursive calls
          0 db block gets
        123 consistent gets
         11 physical reads
          0 redo size
       9405 bytes sent via SQL*Net to client
        457 bytes received via SQL*Net from client
          9 SQL*Net roundtrips to/from client
          3 sorts (memory)
          0 sorts (disk)
        107 rows processed
SQL>Edited by: P. Forstmann on 25 janv. 2011 18:55

[svn:fx-trunk] 9127: Fixes bug in Slider animation where we would set the actual value during the animation , ignoring any snapInterval setting.

Revision: 9127
Author:   [email protected]
Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
Log Message:
Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
QE notes: None
Doc notes: None
Bugs: SDK-21776
Reviewer: Hans
Tests run: checkintests, Mustella (gumbo/components/Slider)
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21776
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

Revision: 9127
Author:   [email protected]
Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
Log Message:
Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
QE notes: None
Doc notes: None
Bugs: SDK-21776
Reviewer: Hans
Tests run: checkintests, Mustella (gumbo/components/Slider)
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21776
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

If someone really wants to do something, it won't take them long to find out how to do it.
http://pondini.org/TM/17.html
Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

Previewing the actual size of the print

I have the image in resolution 2848x4288
i want to print it in 20x30 size
can i preview and see the actual magnification of the image how it is going to be printed?
I am aware i cannot see the whole image cause my screen is too small by i want to see at least part of the image in real print size?
thx
Bart

I've asked for this feature for a very long time (since before LR 1 came out). The answer is no, other than to do it manually and even that is restricted by the limited and discrete magnification levels provided in LR.

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

How to modify the actual person in the picture?

Similar Messages

Maybe you are looking for