How to modify the deployed webdynpro applications

Hi,
I need to modify a deployed webdynpro application.
How to do this?
Ram

Hi
use this link to modify ur EAR file
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/cbcad44c54479c8f1bf9683edb2d30/frameset.htm
Thanks

Similar Messages

How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

Dear Experts.
How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
Please help me with a suggestions.
Thanks
Regards
Carmen G.

Dear Kranthi..
The datas of the Application is the following:
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITV_FPM
Window Information: FPM_WINDOW
View Information: Layout_view
Information on Field
Field ID: HELPTEXT
Type of UI Element : Explanation
Attributes of UI Element
TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
Please can give more suggestions for found the method
Thanks in advance
Regards
Carmen G.

Problem asking for username and password when deploy WebDynPro application

Hi,
I try to deploy WebDynPro application to SAP JEE engine. When i deploy there is popup to put the user name and password.
I have on idea that which username should be used as the username because when i'm installing the SAP CE7.2. They just ask me to enter the only password but there is no username to key in. Please suggest me what is the username and password or how do i reset them.
Thanks a lots.

Hi, i restart and try the 'Administrator' again.so it work. thanks

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

What is the path in the filesystem for the deployed Wendynpro application .

What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
Please help..

Hi,
What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
If you search for your component under the /usr/<SID> folder
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
If you have NWDI in place CTS would help in this, else you can deploy your application using sdm.
in CE you can deploy the application from NWDS.
Regards
Ayyapparaj

How to modify the database by Oracle-ridc-client

How to modify the database by Oracle-ridc-client

First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

Deploy WebDynpro application without SDM password

Is it possbile to deploy WebDynpro application without SDM password? I have account with SAP_J2EE_ADMIN role.

hai,
go to server path
open the dos editor
go to this dir
usr/sap/j2e/jcXX/sdm/program
x:usr/sap/j2e/jcXX/sdm/program\>
StopServer
sdm jstartup "mode=standalone" "sdmhome=."
sdm deploy "sdmhome=." "file=xxx.ear" "onerror=stop"
sdm jstartup "mode=integrated" "sdmhome=."
StartServer
use the above commands one by one
regards,
Naga Raju

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to zip the folder in application server?

how to zip the folder in application server?

You can use
open dataset with filter
link:[http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm#!ABAP_ADDITION_2@2@]

Can any one tell how to modify the PO that is being sent as an email?

Hi,
Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
First of all I would like to know the name of the userexit where this PO is being sent as an email.
It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
Thanks,
Krishna

Eswar,
Thanks for your email.Can you please be bit clear.I am new to this area.
Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
Please give me clear solution.
Thanks,
Krishna

How to stop the new health application from Count the steps/ woking background?

how to stop the new health application from Count the steps/ woking background?
I really need your help

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

In List, How to modify the Link in Quick Edit Mode?

In List, How to modify the Edit in Quic Mode Link? Instead of opening Quick view mode, to open in InfoPath customized form?

Hi Eugene,
According to your description, my understanding is that you want to midify the link of "Edit" and set it linking to a InfoPath Form which can bulk edit your List.
You can use the code above to modify the Edit's hyperlink and set it linking to your InfoPath form.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$("#idHomePageNewItem").next("a").attr("href","the URL of your InfoPath form");
$("#idHomePageNewItem").next("a").removeAttr("onclick");
</script>
For more information about bulk updating a SharePoint list using InfoPath form, you can have a look at the blog:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c05983fc-d992-49ff-8d18-fa8f70777d66/using-infopath-2010-to-bulk-update-a-sharepoint-list?forum=sharepointcustomizationprevious
http://infopath.wordpress.com/2013/09/23/infopath-repeating-table-add-edit-delete-sharepoint-list-items-bulk/
http://sharepointknowledgebase.blogspot.com/2011/10/updating-sharepoint-list-by-using.html#.VGFsKHkcSM8
If any misunstanding, please feel free reminding me and provide more detail for your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to modify the search results of the GUI for subscribing to calendars

How to modify the search results of the GUI for subscribing to calendars
Note:
<OL>
<LI>The following information applies only to iPlanet Calendar Server 5.0
Patch 3.
<LI>All of the cases for which the XSLT changes will work have not been
verified.
<LI>The following is only an example of an XSLT customization.
</OL>
The example below shows a sample customization of the
search_for_calendars
dialog. This customization will result in the Display Name being included as
part of the search results in the GUI, which would normally show just the
calendar ID. It will render the returned calendars in the following format:
<P>
Display Name - <I>description</I>
<P>
Normally, the format would be as follows:
<P>
Calendar-ID - <I>description</I>
<P>
</A>
The example consists of the following two files:
<P>
<OL>
<LI>search_for_calendars_common.xsl
(the entire XSLT file)
<P>
<LI>diffctx.txt
(the context sensitive diff patch file,
which basically shows only the changes that need to be made)
</OL>
<P>
<HR>
</A><B>
search_for_calendars_common.xsl</B>
<?xml version="1.0" ?>
<!DOCTYPE xsl:stylesheet (View Source for full doctype...)>
- 
- <xsl:stylesheet xmlns:xsl="http://www.w3.org/XSL/Transform/1.0">
- 
<xsl:output method="html" encoding="ISO-8859-1" />
<xsl:include href="data/common.xsl" />
<xsl:include href="data/i18n.xsl" />
<xsl:include href="data/date_format.xsl" />
<xsl:include href="data/dialog_tabs.xsl" />
- <xsl:template match="/">
<xsl:apply-templates select="calendar" />
</xsl:template>
- <xsl:template match="calendar">
- <xsl:choose>
- <xsl:when test="@top='true'">
- <xsl:variable name="Frame1">
<xsl:value-of select="frame[1]" />
</xsl:variable>
- <xsl:variable name="Frame2">
<xsl:value-of select="frame[2]" />
</xsl:variable>
- <xsl:variable name="Frame3">
<xsl:value-of select="frame[3]" />
</xsl:variable>
- <xsl:variable name="tab_value">
<xsl:value-of select="@tab" />
</xsl:variable>
- <HTML>
- <HEAD>
<xsl:call-template name="contextJavascript" />
<TITLE>Calendars Search: Calendar Express - iPlanet</TITLE>
</HEAD>
- <FRAMESET border="0" frameborder="0" rows="77,*,71">
<FRAME name="tab" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" src="{$Frame1}" />
<FRAME name="main" frameborder="0" src="{$Frame2}" />
<FRAME name="button" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" frameborder="0" src="{$Frame3}" />
</FRAMESET>
</HTML>
</xsl:when>
- <xsl:when test="@view='searchProperties'">
- <xsl:for-each select="group">
- <xsl:if test="@name='searchProperties'">
<xsl:call-template name="search_toolbar" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='main'">
- <xsl:for-each select="group">
- <xsl:if test="@name='main'">
<xsl:call-template name="main" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='button'">
- <xsl:for-each select="group">
- <xsl:if test="@name='button'">
<xsl:call-template name="button_root" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:otherwise>
- <html>
What's this view? (search_for_cals.xsl) -
<xsl:value-of select="@view" />
</html>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
- <xsl:template name="search_toolbar">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0" onload="window.focus()">
- <FORM>
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:attribute name="onSubmit">document.forms[0]['find'].click(); return false;
</xsl:attribute>
<xsl:apply-templates select="formdata" />
- <CENTER>
- <TABLE border="0" cellpadding="2" cellspacing="0" width="100%" height="100%">
- <TR>
- <TD align="center">
- <TABLE border="0" cellpadding="3" cellspacing="1">
- <TR>
- <TD colspan="4">
<FONT size="{$font_size_big_2}" face="{$font_name}">Find all calendars where
the calendar</FONT>
</TD>
</TR>
- <TR>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="which">
<OPTION value="name;calid">name or ID</OPTION>
<OPTION value="name">name</OPTION>
<OPTION value="primaryOwner">primary owner</OPTION>
<OPTION value="calid">ID</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="how">
<OPTION value="0">contains</OPTION>
<OPTION value="1">begins with</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
<INPUT type="text" name="what" />
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <INPUT type="button" name="find" value="Find">
- <xsl:attribute name="onClick">
<xsl:value-of select="./button[@name='find']" />
</xsl:attribute>
</INPUT>
</FONT>
</TD>
</TR>
</TABLE>
</TD>
</TR>
</TABLE>
</CENTER>
</FORM>
</BODY>
</HTML>
</xsl:template>
- <xsl:template name="main">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0">
- <FORM name="form" method="post">
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:apply-templates select="formdata" />
<INPUT type="hidden" name="how" value="0" />
<INPUT type="hidden" name="which" value="name;calid" />
<INPUT type="hidden" name="what" value=" />
<INPUT type="hidden" name="selectedGroup" />
- <xsl:if test="(./calsearchresults/nomatch)">
- 
&nbsp;
&nbsp;
No Match Found
</xsl:if>
- <xsl:for-each select="./calsearchresults/searchresultcal">
- <P>
&nbsp;
&nbsp;
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <FONT size="{$font_size_big}" face="{$font_name}">
Owner:
<xsl:value-of select="@owner" />
<FONT size="{$font_size_big}" face="{$font_name}" color="{$bgcolor_wend_mid}">|
</FONT>
Calendar ID:
<xsl:value-of select="@id" />
<BR />
</FONT>
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <xsl:choose>
- <xsl:when test="@subscribed='false'">
&nbsp;
&nbsp;
- <INPUT type="checkbox" name="calendar">
- <xsl:attribute name="value">
<xsl:value-of select="@name" />
</xsl:attribute>
</INPUT>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
</xsl:when>
- <xsl:otherwise>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
&nbsp;
(Subscribed)
</xsl:otherwise>
</xsl:choose>
- <xsl:if test="string-length(@description) > 0">
&nbsp;
&nbsp;
- <FONT size="{$font_size_big}" face="{$font_name}">
<xsl:value-of select="@description" />
</FONT>
</xsl:if>
</FONT>
</FONT>
</P>
</xsl:for-each>
</FORM>
</BODY>
</HTML>
</xsl:template>
</xsl:stylesheet>
<P>
<A HREF="#back">Back</A>
<P>
<HR>
</A>
<B>diffctx.txt</B>
Index: search_for_calendars_common.xsl
===================================================================
RCS file: /m/src/ns/server/msg/calendar/core/html/search_for_calendars_common.xsl,v
retrieving revision 1.1.2.14
diff -c -r1.1.2.14 search_for_calendars_common.xsl
*** search_for_calendars_common.xsl 2000/12/12 23:10:43 1.1.2.14
--- search_for_calendars_common.xsl 2001/03/15 23:55:19
*** 182,188 ****
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@id"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
--- 182,188 ----
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@name"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
*** 190,196 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
</xsl:when>
<xsl:otherwise>
--- 190,196 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
</xsl:when>
<xsl:otherwise>
*** 199,205 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
--- 199,205 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
<P>
<A HREF="#back">Back</A>

Maybe on the Google API s page?

How to modify the deployed webdynpro applications

Similar Messages

Maybe you are looking for