How to modify the Generic Delta in Standard Data Source...?

Hi BW Guru's,
We have one issue like all values are coming from customer master data data source 0CUST_COMPC_ATTR which is delta capable. Recently the functional guys done some modification on customer by remapping the field to sales rep. this will be impact on collector field (this is generic field - ZZ field). Now there will be frequent changes for collector field and the delta is not able to pick up the changed values in to BW system.
I have tried in different ways but not resolved finally i got some clue which as follows:
Data source 0CUST_COMPC_ATTR shows delta process as 'E' Unspecific Delta
Using Extractor (Not ODS-capable) in RSA2.
Now i would like to change the option to delta process to D unspecified delta using delta queue (not ODS-capable).
Can any one give advice me on this. Your help will be appreciated.
Thanks in Advance,
Venkat

Hi Olivier,
Thanks for quick response.
I am sorry for not mentioning the module on which i am working.
I am working on FI-CO extraction. I heard that In FI-CO the delta queue does not support because it won't support V3 Delta mechanism.
But any how i will try with ROOSOURCE and let you know the status of it.
If any advices please revert back with suitable suggestions.
Thanks and Regards,
Venkat

Similar Messages

How to set the POV in WebAnalysis when data source is HFM?

Hi Every one..
Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
Thnaks in advance
Rao

yeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this.

How to modify the layout and coding for 'RVORDER01' after copying ..

Hi all,
I am trying to modify standard script layout SALES ORDER for Quotation,
i.e. I had copied standard form 'RVORDER01' to 'ZBAT_RVORDER01'.
and now I am trying to compress the information box. But no box in the layout was selecting while trying to resize it. Can any one help in this issue.
And I also want to know, how to modify the coding in that standard script. i.e. to add a perform statement and etc..
Thanks in advance,
Surender.

GOTO SE71, and give the form name as 'ZBAT_RVORDER01' and Language as DE, try to compress the box according to your requirement, save activate and return to SE71, now change the language to EN, you will see the compressed window in EN.
The casue of your problem is the original language is in DE so window changes, character formats etc can be done in DE language or change original language to english,
TO change original language to EN, SE71 ,FOrm name Language DE click change, goto utilities--> change Language.
Regards,
Sairam

ABAP code to enhance a standard data source

Hi BW experts,
I am a novice in BW and I need to append a standard datasource 0DAT_SRC with a field FLD1 from table TABL1.Extract structure: EX0001.
Can anybody please suggest how this can be done?I guess it requires some ABAP coding to be done in the conversion exits.
Many,many thanks in advance!!

Following are the steps to enhance Standard Data source.
1. goto tc RSA6.
2. Select the Data Source which you want to enhance.
3. Select display Data Source (Ctr+f2)
4. Double click on the Extract structure.
5. click on the Append Structure.
6. Add the required fieds starting with ZZ*.
7. Avtivate the Append Structure.
To populate the data into this field you must have a project created to access the FM 'EXIT_SAPLRSAP_001'.
to Create Project code goto tcode: CMOD
1. Enter the Project name and click on create
2. go to components select the required function module.
EXIT_SAPLRSAP_001 for Transactional DS (RSR000
EXIT_SAPLRSAP_002 for Master DS
Goto SE37 and enter the Respective Function module (ex . EXIT_SAPLRSAP_001) and click on the include zxxxxx. then write the code to populate the extra fields added to the DS.
Sample code:
CASE i_datasource.
WHEN '2LIS_11_VAITM'.
loop at c_t_data into work_ar.
do some selections, some calculations ....
append work_ar to c_t_data. " add a new record
modify c_t_data from wa. " change the existing record
endloop.
endcase.

How to modify the standard script in scripts?

how to modify the standard script in scripts?

Nagaraju,
Standard scripts cant be modified.
Only thing is you need to copy it to z-form and have to do modifications as per ur requirements.
Here is the procedure to copy standard form to z-form.
goto SE71 t-code, then select the menu path : Utilities -> Copy from Client
then it will take to another screen, give the form name as Standard form name, if u r copying a stadard invoice means, type RVINVOICE01 and target form, ZRVINVOICE01. Now press execute button, it will copy the form into 25 languages. Now come back to se71, enter Z-form name and do the required changes.
Hope this hint may help you, Pls close the thread if u met with correct answer.
Regards,
Sujatha.

How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

Dear Experts.
How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
Please help me with a suggestions.
Thanks
Regards
Carmen G.

Dear Kranthi..
The datas of the Application is the following:
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITV_FPM
Window Information: FPM_WINDOW
View Information: Layout_view
Information on Field
Field ID: HELPTEXT
Type of UI Element : Explanation
Attributes of UI Element
TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
Please can give more suggestions for found the method
Thanks in advance
Regards
Carmen G.

How to modify the window name and field name in standard oracle forms

Hi All,
I am new to the forms. I would like to ask how to modify the standard form window name "Subinventories" to "INV Subinventories" in EBS.
Please help.
Thank you.
Regards,
Diane

hi
plz move your thread to EBS forum.
sarah

How to Modify the standard layout set for Sales Order

Hi all,
Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
Thanks in advance
Santosh R

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00 Price 130.00000 TEST 100
 Gross Value 20.12 USD 100 <-how to
 Discount Amount 0.00 USD 100
 Rebate Basis 20.12 USD 100
 Net Value for Item 20.12 USD 100
 Net Value 2 20.12 USD 100
 Net Value 3 20.12 USD 100
VPRS Cost 27.22 HKD
 Profit Margin 16.61 USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
The system asks for access key only of two reasons:
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
the steps to get access key
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
or
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
or
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
reward if usefull

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

How to modify the database by Oracle-ridc-client

How to modify the database by Oracle-ridc-client

First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

CJ31 - How to modifying the assigned budget

Hi gurus,
We have checked that in our system we have incorrect values in the Budget database. this is because we have posted invoices directly in FI by a batch input calling to the tcode FB01. We post this with reference to Purchase orders populating the field "purchase order". I mean, the FI invoice has the field PO document filled out with the PO number. We close the PO number manually.
The problem is that even the invoice is with the same amount than the PO, the assigned budget in transaction CJ31 is being modified in the value for instead remaining without changes. Transaction MIRO makes a check in the PO when being posted but FB01 not. In fact in MIRO if the amount is greater than PO, the assigned value is increased.
SAP has indicated that FB01 is not connected to the commitment system as MIRO so this is the correct behavior of system. At this point we are going to start using the standard procedure. However we need to correct the current data we assigned to the .
Therefore we have the in budget database corrupted since they are duplicated or even more than duplicated.
My question is how to modify the assigned budget?
-Is there any way from a functional point of view (executing some transaction or program) to reduce the assigned budget for errors like this?
-In case that this is not possible by t-code or program, is there any idea of tables we need to adjust? We know that the table PJPA registers the annual records and assigned values are displayed in fields WTJHR and WLJHR but we cannot modify only this table in case there are other tables linked.
Many thanks in advance and kind regards

Hi Varun,
Thanks for replying. I checked the note you linked. However I didn't find a solution
CJEN and CJBN are not an option for us. With these transaction we can rebuild the data but the wrong data is already imputed in my system. Just to clarify. My requirement is getting a way to amend the values we have in the assigned value. From the system point of view the assigned budget is correct because it was imputed from FI. But in terms of my business we are duplicating the assigned (Purchase orde an FI document). Therefore we are searching for modify the assigned value in order to represent the real budget state.
Kind Regards

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.

How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

How to Modify the Seeded REQAPPRV Workflow?

Hi All,
Iam new to workflow.I have a minor change in workflow( REQAPPRV ).In " Messages" PO_REQ_APPROVED_JRAD .I need to edit the subject.Could you please give me the steps how to modify the standard workflow? After changes done how do we migrate to another instances WFT files?
Thanks,
Sandeep

Pl post details of OS, database and EBS versions.
Workflows are modified by using the developer tool Workflow Builder. You can migrate workflows from one instance to another using the server-side WFLOAD executable or using WF Builder itself.
How To Obtain Oracle Workflow Builder (Doc ID 401288.1)
How To Update and Move Workflow From One Instance to Another? (Doc ID 398460.1)
HTH
Srini

How to modify the Generic Delta in Standard Data Source...?

Similar Messages

Maybe you are looking for