How to modify the some data which is in German words along with the english

I have a file which contains some German words among English sentences in the flat file. I am trying to convert them using BDC but It has been showing some special characters like * or ? in the sap system.
How can I modify the German words at the time of transferring and After transferring they should be in the same German format only.
Please help to get it asap.

dont change anything in the code
log onto SAP in GERMAN language ..then run ur BDC ... let ur flat file content remain same .....
ur german charaters will be reflceted ..once BDC is finished...
try & let me know
otherwise i have other solutin

Similar Messages

Can any one tell how to modify the PO that is being sent as an email?

Hi,
Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
First of all I would like to know the name of the userexit where this PO is being sent as an email.
It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
Thanks,
Krishna

Eswar,
Thanks for your email.Can you please be bit clear.I am new to this area.
Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
Please give me clear solution.
Thanks,
Krishna

How to modify the search results of the GUI for subscribing to calendars

How to modify the search results of the GUI for subscribing to calendars
Note:
<OL>
<LI>The following information applies only to iPlanet Calendar Server 5.0
Patch 3.
<LI>All of the cases for which the XSLT changes will work have not been
verified.
<LI>The following is only an example of an XSLT customization.
</OL>
The example below shows a sample customization of the
search_for_calendars
dialog. This customization will result in the Display Name being included as
part of the search results in the GUI, which would normally show just the
calendar ID. It will render the returned calendars in the following format:
<P>
Display Name - <I>description</I>
<P>
Normally, the format would be as follows:
<P>
Calendar-ID - <I>description</I>
<P>
</A>
The example consists of the following two files:
<P>
<OL>
<LI>search_for_calendars_common.xsl
(the entire XSLT file)
<P>
<LI>diffctx.txt
(the context sensitive diff patch file,
which basically shows only the changes that need to be made)
</OL>
<P>
<HR>
</A><B>
search_for_calendars_common.xsl</B>
<?xml version="1.0" ?>
<!DOCTYPE xsl:stylesheet (View Source for full doctype...)>
- 
- <xsl:stylesheet xmlns:xsl="http://www.w3.org/XSL/Transform/1.0">
- 
<xsl:output method="html" encoding="ISO-8859-1" />
<xsl:include href="data/common.xsl" />
<xsl:include href="data/i18n.xsl" />
<xsl:include href="data/date_format.xsl" />
<xsl:include href="data/dialog_tabs.xsl" />
- <xsl:template match="/">
<xsl:apply-templates select="calendar" />
</xsl:template>
- <xsl:template match="calendar">
- <xsl:choose>
- <xsl:when test="@top='true'">
- <xsl:variable name="Frame1">
<xsl:value-of select="frame[1]" />
</xsl:variable>
- <xsl:variable name="Frame2">
<xsl:value-of select="frame[2]" />
</xsl:variable>
- <xsl:variable name="Frame3">
<xsl:value-of select="frame[3]" />
</xsl:variable>
- <xsl:variable name="tab_value">
<xsl:value-of select="@tab" />
</xsl:variable>
- <HTML>
- <HEAD>
<xsl:call-template name="contextJavascript" />
<TITLE>Calendars Search: Calendar Express - iPlanet</TITLE>
</HEAD>
- <FRAMESET border="0" frameborder="0" rows="77,*,71">
<FRAME name="tab" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" src="{$Frame1}" />
<FRAME name="main" frameborder="0" src="{$Frame2}" />
<FRAME name="button" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" frameborder="0" src="{$Frame3}" />
</FRAMESET>
</HTML>
</xsl:when>
- <xsl:when test="@view='searchProperties'">
- <xsl:for-each select="group">
- <xsl:if test="@name='searchProperties'">
<xsl:call-template name="search_toolbar" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='main'">
- <xsl:for-each select="group">
- <xsl:if test="@name='main'">
<xsl:call-template name="main" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='button'">
- <xsl:for-each select="group">
- <xsl:if test="@name='button'">
<xsl:call-template name="button_root" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:otherwise>
- <html>
What's this view? (search_for_cals.xsl) -
<xsl:value-of select="@view" />
</html>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
- <xsl:template name="search_toolbar">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0" onload="window.focus()">
- <FORM>
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:attribute name="onSubmit">document.forms[0]['find'].click(); return false;
</xsl:attribute>
<xsl:apply-templates select="formdata" />
- <CENTER>
- <TABLE border="0" cellpadding="2" cellspacing="0" width="100%" height="100%">
- <TR>
- <TD align="center">
- <TABLE border="0" cellpadding="3" cellspacing="1">
- <TR>
- <TD colspan="4">
<FONT size="{$font_size_big_2}" face="{$font_name}">Find all calendars where
the calendar</FONT>
</TD>
</TR>
- <TR>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="which">
<OPTION value="name;calid">name or ID</OPTION>
<OPTION value="name">name</OPTION>
<OPTION value="primaryOwner">primary owner</OPTION>
<OPTION value="calid">ID</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="how">
<OPTION value="0">contains</OPTION>
<OPTION value="1">begins with</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
<INPUT type="text" name="what" />
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <INPUT type="button" name="find" value="Find">
- <xsl:attribute name="onClick">
<xsl:value-of select="./button[@name='find']" />
</xsl:attribute>
</INPUT>
</FONT>
</TD>
</TR>
</TABLE>
</TD>
</TR>
</TABLE>
</CENTER>
</FORM>
</BODY>
</HTML>
</xsl:template>
- <xsl:template name="main">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0">
- <FORM name="form" method="post">
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:apply-templates select="formdata" />
<INPUT type="hidden" name="how" value="0" />
<INPUT type="hidden" name="which" value="name;calid" />
<INPUT type="hidden" name="what" value=" />
<INPUT type="hidden" name="selectedGroup" />
- <xsl:if test="(./calsearchresults/nomatch)">
- 
&nbsp;
&nbsp;
No Match Found
</xsl:if>
- <xsl:for-each select="./calsearchresults/searchresultcal">
- <P>
&nbsp;
&nbsp;
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <FONT size="{$font_size_big}" face="{$font_name}">
Owner:
<xsl:value-of select="@owner" />
<FONT size="{$font_size_big}" face="{$font_name}" color="{$bgcolor_wend_mid}">|
</FONT>
Calendar ID:
<xsl:value-of select="@id" />
<BR />
</FONT>
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <xsl:choose>
- <xsl:when test="@subscribed='false'">
&nbsp;
&nbsp;
- <INPUT type="checkbox" name="calendar">
- <xsl:attribute name="value">
<xsl:value-of select="@name" />
</xsl:attribute>
</INPUT>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
</xsl:when>
- <xsl:otherwise>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
&nbsp;
(Subscribed)
</xsl:otherwise>
</xsl:choose>
- <xsl:if test="string-length(@description) > 0">
&nbsp;
&nbsp;
- <FONT size="{$font_size_big}" face="{$font_name}">
<xsl:value-of select="@description" />
</FONT>
</xsl:if>
</FONT>
</FONT>
</P>
</xsl:for-each>
</FORM>
</BODY>
</HTML>
</xsl:template>
</xsl:stylesheet>
<P>
<A HREF="#back">Back</A>
<P>
<HR>
</A>
<B>diffctx.txt</B>
Index: search_for_calendars_common.xsl
===================================================================
RCS file: /m/src/ns/server/msg/calendar/core/html/search_for_calendars_common.xsl,v
retrieving revision 1.1.2.14
diff -c -r1.1.2.14 search_for_calendars_common.xsl
*** search_for_calendars_common.xsl 2000/12/12 23:10:43 1.1.2.14
--- search_for_calendars_common.xsl 2001/03/15 23:55:19
*** 182,188 ****
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@id"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
--- 182,188 ----
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@name"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
*** 190,196 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
</xsl:when>
<xsl:otherwise>
--- 190,196 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
</xsl:when>
<xsl:otherwise>
*** 199,205 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
--- 199,205 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
<P>
<A HREF="#back">Back</A>

Maybe on the Google API s page?

How to modify the timestamp in a msg file?

Hi All,
Do you know how to modify the timestamp in a msg file which was saved from Outlook Inbox. The mail subject and body are able to be modified by selecting
Actions - Edit Message. But it looks like the mail timestamp and the To/Cc are not able to be modified.
Thanks,
高麻雀

You can convert your MSG file(s) to EML format, edit Date: header in EML file with any plain text editor (like Notepad) and then convert it back to MSG.
You can use free
Convert Outlook MSG to EML Files and
Convert EML Files to Outlook MSG utilities to perform the conversion.
Alexey Kuznetsov,
Relief Software
More than 100 free add-ins for Outlook

CJ31 - How to modifying the assigned budget

Hi gurus,
We have checked that in our system we have incorrect values in the Budget database. this is because we have posted invoices directly in FI by a batch input calling to the tcode FB01. We post this with reference to Purchase orders populating the field "purchase order". I mean, the FI invoice has the field PO document filled out with the PO number. We close the PO number manually.
The problem is that even the invoice is with the same amount than the PO, the assigned budget in transaction CJ31 is being modified in the value for instead remaining without changes. Transaction MIRO makes a check in the PO when being posted but FB01 not. In fact in MIRO if the amount is greater than PO, the assigned value is increased.
SAP has indicated that FB01 is not connected to the commitment system as MIRO so this is the correct behavior of system. At this point we are going to start using the standard procedure. However we need to correct the current data we assigned to the .
Therefore we have the in budget database corrupted since they are duplicated or even more than duplicated.
My question is how to modify the assigned budget?
-Is there any way from a functional point of view (executing some transaction or program) to reduce the assigned budget for errors like this?
-In case that this is not possible by t-code or program, is there any idea of tables we need to adjust? We know that the table PJPA registers the annual records and assigned values are displayed in fields WTJHR and WLJHR but we cannot modify only this table in case there are other tables linked.
Many thanks in advance and kind regards

Hi Varun,
Thanks for replying. I checked the note you linked. However I didn't find a solution
CJEN and CJBN are not an option for us. With these transaction we can rebuild the data but the wrong data is already imputed in my system. Just to clarify. My requirement is getting a way to amend the values we have in the assigned value. From the system point of view the assigned budget is correct because it was imputed from FI. But in terms of my business we are duplicating the assigned (Purchase orde an FI document). Therefore we are searching for modify the assigned value in order to represent the real budget state.
Kind Regards

How to modify the names of existing Pages styles?

In Pages 5.5.2 under Yosemite 10.10.2.
1. How to modify the name of an existing style in both the Main styles list, and also in the Bullets & Lists styles list?
2. How to delete unwanted styles from both styles lists?
3. How to modify the default formulas for Bullets & Lists styles and make them stick for future documents?
Appreciated.

Click on it and you get the Formatting options for the selected text.
If I had meant the Menus, I would have added that, but all the above is what you see when you have a document open in Pages 5.5.2.
The > are clearly progressive steps. Except for the ">" which appears in the pop up menu, so I put it in quotes.
I always assume that people on the forum will make some effort themselves, but can bring it down a notch if needed.
Peter

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

In List, How to modify the Link in Quick Edit Mode?

In List, How to modify the Edit in Quic Mode Link? Instead of opening Quick view mode, to open in InfoPath customized form?

Hi Eugene,
According to your description, my understanding is that you want to midify the link of "Edit" and set it linking to a InfoPath Form which can bulk edit your List.
You can use the code above to modify the Edit's hyperlink and set it linking to your InfoPath form.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$("#idHomePageNewItem").next("a").attr("href","the URL of your InfoPath form");
$("#idHomePageNewItem").next("a").removeAttr("onclick");
</script>
For more information about bulk updating a SharePoint list using InfoPath form, you can have a look at the blog:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c05983fc-d992-49ff-8d18-fa8f70777d66/using-infopath-2010-to-bulk-update-a-sharepoint-list?forum=sharepointcustomizationprevious
http://infopath.wordpress.com/2013/09/23/infopath-repeating-table-add-edit-delete-sharepoint-list-items-bulk/
http://sharepointknowledgebase.blogspot.com/2011/10/updating-sharepoint-list-by-using.html#.VGFsKHkcSM8
If any misunstanding, please feel free reminding me and provide more detail for your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to modify the blob size, or how to set the size?

i want to know how to modify the blob size, or how to set the size?
what's the default size of blob?
Thanks in advance.

Blob datatype can contain binary data with a maximum size of 4 GB.
when you enter 10kb file, the database will only use 10kb to store the file (depending on block size etc)
if you want to modify the blob size, you may do like this:
SQL> create materialized view t_mv refresh fast on commit
2 as select id, dbms_lob.getlength(x) len from t;
Materialized view created.
SQL> alter table t_mv add constraint t_mv_chk check (len < 100);
Table altered.

How to modify the database by Oracle-ridc-client

How to modify the database by Oracle-ridc-client

First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

Dear Experts.
How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
Please help me with a suggestions.
Thanks
Regards
Carmen G.

Dear Kranthi..
The datas of the Application is the following:
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITV_FPM
Window Information: FPM_WINDOW
View Information: Layout_view
Information on Field
Field ID: HELPTEXT
Type of UI Element : Explanation
Attributes of UI Element
TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
Please can give more suggestions for found the method
Thanks in advance
Regards
Carmen G.

Urgent : How to modify the line type and table type

I am working on ALV Grid Control, i need to know how to modify the line type values to table type.
             ls_celltab-fieldname = 'ZSAVINGS '.
             ls_celltab-style = l_mode.
        INSERT ls_celltab INTO TABLE pt_celltab.
Here ls_celltab is line type and pt_celltab is table type.
Please give me the suggestion ASAP.
C.Bharath Kumar

Hi,
Here is the example
DATA: BEGIN OF LINE,
        LAND(3) TYPE C,
        NAME(10) TYPE C,
        AGE      TYPE I,
        WEIGHT   TYPE P DECIMALS 2,
      END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE
          WITH NON-UNIQUE KEY LAND NAME AGE WEIGHT.
LINE-LAND = 'G'.   LINE-NAME   = 'Hans'.
LINE-AGE = 20.    LINE-WEIGHT = '80.00'.
INSERT LINE INTO TABLE ITAB.
LINE-LAND = 'USA'. LINE-NAME   = 'Nancy'.
LINE-AGE = 35.    LINE-WEIGHT = '45.00'.
INSERT LINE INTO TABLE ITAB.
Regards
Sudheer

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
<b>The system asks for access key only of two reasons:</b>
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
<b>the steps to get access key</b>
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
<b>or</b>
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
<b>or</b>
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
<b>reward if usefull</b>

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to modify the layout and coding for 'RVORDER01' after copying ..

Hi all,
I am trying to modify standard script layout SALES ORDER for Quotation,
i.e. I had copied standard form 'RVORDER01' to 'ZBAT_RVORDER01'.
and now I am trying to compress the information box. But no box in the layout was selecting while trying to resize it. Can any one help in this issue.
And I also want to know, how to modify the coding in that standard script. i.e. to add a perform statement and etc..
Thanks in advance,
Surender.

GOTO SE71, and give the form name as 'ZBAT_RVORDER01' and Language as DE, try to compress the box according to your requirement, save activate and return to SE71, now change the language to EN, you will see the compressed window in EN.
The casue of your problem is the original language is in DE so window changes, character formats etc can be done in DE language or change original language to english,
TO change original language to EN, SE71 ,FOrm name Language DE click change, goto utilities--> change Language.
Regards,
Sairam

How to modify the some data which is in German words along with the english

Similar Messages

Maybe you are looking for