How to modify the timescale on the Timeline view in MSP 2010

I created Timeline's for some projects using MSP 2010.  Some Tinelines display quarters and others display months.  I can't find an option to change the Timeline timescale.  I tried switching the timescale onthe Gantt view but it
had no effect on the Timeline view. 
Is there a direct or indirect way to change the timescale units on the Tineline view time scale?

Click in  the Timeline view and the ribbon bar for Timeline will be activated.  On the left side you should see Date Format.  Use this to select the date format you would like to view.
As i adjust the timescale using the zoom in the lower right corner it seems to be adjusting the date density.  Keep in mind that this view will also adjust to the density necessary to show the entire project in the view.  When you click on the
View tab (ribbon) you can use the option for the entire project.  Note that the Timescale options are not available.
I suggest for the best use of this view to use it at a high level.  What I recommend is to show summary and milestone taaks only. 
Ellen Lehnert
www.lehnertcs.com
Ellen Lehnert, MVP, PMP, MCT Training/Consulting/Author [email protected], www.lehnertcs.com Author "Managing Projects using MS Project 2010 desktop" courseware, www.MVP-Press.com

Similar Messages

  • How do change the timeline view in PE9 to see all frames?

    In PE9 I notice that many frames in timeline view appear blank. at the clip transitions the frame have images.   How do I change this to see all the frames?  In PE 2 I never had the "feature".  I assume that most are blank to reduce file handling,etc.   But I'd like to toggle the frame images on/off on command.
    p.s.  when I imported a short 8 munutes series of clips direct from my HD sony camera the timeline frames were complete... but most video i'm using is old anlaog tape conversions to DVD...than dvd files imported for PE editing.
    thanks
    david

    I was only half-correct. In PrPro, there is a drop-down menu, while in PrE, it's a toggle through the three possible display states:
    Sorry for that, and good luck,
    Hunt

  • How to modify the coding part of KE30 reports ?

    How to modify the coding part of KE30 reports ,
    so that I can be able to restrict report output based on sales office.
    I am unable to find out the program name also.
    Regards
    Anubhav

    >
    Venkat Reddy wrote:
    > Hi,
    >
    > If u want to know the program running for KE30 just go to SE93 and give KE30
    > and click on display you can see the program running for KE30 will be SAPMKCEE.
    > I think this is much simpler :-).
    >
    > Rather than change the standard report try to prepared your own that will be more
    > comfortable since it will be complex task to achieve editing the standard program.
    > Good Luck
    >
    > Regards
    > VEnk@
    >
    > Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
    Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it?? 
    P.S: Just a thought.
    Regards.
    Vishwa.

  • How to modify the field lengh of file upload

    Hi All,
       I am facing a problem with u201Cuploadu201D filed length in BSP application.
    When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
    Now this field is appearing 20 char length
    Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
    In the current application the file upload is being done through a structure (attributes)
    In this structure the fields are like this
    PAGE_NAME
    ID
    FOR
    TAGS
    ROW_INDEX
    COLUMN_INDEX
    OTR_NAME
    REQUIRED_NAME
    MAXLENGTH
    SIZE
    TABLE_NAME
    ON_SELECT
    VALUE
    DISABLED
    ONCLICK
    TEXT
    TYPE
    Using this method:
    CALL METHOD cl_htmlb_fileupload=>factory
              EXPORTING
                Id      = ls_form_save-id
              RECEIVING
                Element = lv_fileup.
            bee_table->add ( level = 2 element = lv_fileup ).
    This cl_htmlb_fileupload is named as class interface.
    Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
    In this class it has the attribute u201CSIZEu201D by default string 20.
    Now I need to change this attribute length from 20 to 100
    For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
    This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
    Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
    This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
    And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
    Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
    Thanks in advance
    Rambabu.A

    Hi,
    Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
    As per your requirement, you can use the SIZE parameter of method factory:
    ls_form_save-size = '100'.
    CALL METHOD cl_htmlb_fileupload=>factory
    EXPORTING
    Id = ls_form_save-id
    Size = ls_form_save-size
    RECEIVING
    Element = lv_fileup.
    Regards,
    Tanguy

  • Can any one tell how to modify the PO that is being sent as an email?

    Hi,
           Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
    My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
    I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
    First of all I would like to know the name of the userexit where this PO is being sent as an email.
    It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
    Thanks,
    Krishna

    Eswar,
                Thanks for your email.Can you please be bit clear.I am new to this area.
    Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
    Please give me clear solution.
    Thanks,
    Krishna

  • In List, How to modify the Link in Quick Edit Mode?

    In List, How to modify the Edit in Quic Mode Link? Instead of opening Quick view mode, to open in InfoPath customized form?

    Hi Eugene,
    According to your description, my understanding is that you want to midify the link of "Edit" and set it linking to a InfoPath Form which can bulk edit your List.
    You can use the code above to modify the Edit's hyperlink and set it linking to your InfoPath form.
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(document).ready(function () {
    $("#idHomePageNewItem").next("a").attr("href","the URL of your InfoPath form");
    $("#idHomePageNewItem").next("a").removeAttr("onclick");
    </script>
    For more information about bulk updating a SharePoint list using InfoPath form, you can have a look at the blog:
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c05983fc-d992-49ff-8d18-fa8f70777d66/using-infopath-2010-to-bulk-update-a-sharepoint-list?forum=sharepointcustomizationprevious
    http://infopath.wordpress.com/2013/09/23/infopath-repeating-table-add-edit-delete-sharepoint-list-items-bulk/
    http://sharepointknowledgebase.blogspot.com/2011/10/updating-sharepoint-list-by-using.html#.VGFsKHkcSM8
    If any misunstanding, please feel free reminding me and provide more detail for your issue.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • How to modify  the search results of the GUI for subscribing to calendars

    How to modify the search results of the GUI for subscribing to calendars
    Note:
    <OL>
    <LI>The following information applies only to iPlanet Calendar Server 5.0
    Patch 3.
    <LI>All of the cases for which the XSLT changes will work have not been
    verified.
    <LI>The following is only an example of an XSLT customization.
    </OL>
    The example below shows a sample customization of the
    search_for_calendars
    dialog. This customization will result in the Display Name being included as
    part of the search results in the GUI, which would normally show just the
    calendar ID. It will render the returned calendars in the following format:
    <P>
    Display Name - <I>description</I>
    <P>
    Normally, the format would be as follows:
    <P>
    Calendar-ID - <I>description</I>
    <P>
    </A>
    The example consists of the following two files:
    <P>
    <OL>
    <LI>search_for_calendars_common.xsl
    (the entire XSLT file)
    <P>
    <LI>diffctx.txt
    (the context sensitive diff patch file,
    which basically shows only the changes that need to be made)
    </OL>
    <P>
    <HR>
    </A><B>
    search_for_calendars_common.xsl</B>
    <?xml version="1.0" ?>
    <!DOCTYPE xsl:stylesheet (View Source for full doctype...)>
    - <!--
    set the output properties
    <xsl:stylesheet
    xmlns:xsl="http://www.w3.org/XSL/Transform/1.0"
    result-ns="http://www.w3.org/TR/REC-html40">
    -->
    - <xsl:stylesheet xmlns:xsl="http://www.w3.org/XSL/Transform/1.0">
    - <!-- set the output properties
    -->
    <xsl:output method="html" encoding="ISO-8859-1" />
    <xsl:include href="data/common.xsl" />
    <xsl:include href="data/i18n.xsl" />
    <xsl:include href="data/date_format.xsl" />
    <xsl:include href="data/dialog_tabs.xsl" />
    - <xsl:template match="/">
    <xsl:apply-templates select="calendar" />
    </xsl:template>
    - <xsl:template match="calendar">
    - <xsl:choose>
    - <xsl:when test="@top='true'">
    - <xsl:variable name="Frame1">
    <xsl:value-of select="frame[1]" />
    </xsl:variable>
    - <xsl:variable name="Frame2">
    <xsl:value-of select="frame[2]" />
    </xsl:variable>
    - <xsl:variable name="Frame3">
    <xsl:value-of select="frame[3]" />
    </xsl:variable>
    - <xsl:variable name="tab_value">
    <xsl:value-of select="@tab" />
    </xsl:variable>
    - <HTML>
    - <HEAD>
    <xsl:call-template name="contextJavascript" />
    <TITLE>Calendars Search: Calendar Express - iPlanet</TITLE>
    </HEAD>
    - <FRAMESET border="0" frameborder="0" rows="77,*,71">
    <FRAME name="tab" marginheight="0" marginwidth="0" scrolling="no"
    scrollbars="no" src="{$Frame1}" />
    <FRAME name="main" frameborder="0" src="{$Frame2}" />
    <FRAME name="button" marginheight="0" marginwidth="0" scrolling="no"
    scrollbars="no" frameborder="0" src="{$Frame3}" />
    </FRAMESET>
    </HTML>
    </xsl:when>
    - <xsl:when test="@view='searchProperties'">
    - <xsl:for-each select="group">
    - <xsl:if test="@name='searchProperties'">
    <xsl:call-template name="search_toolbar" />
    </xsl:if>
    </xsl:for-each>
    </xsl:when>
    - <xsl:when test="@view='main'">
    - <xsl:for-each select="group">
    - <xsl:if test="@name='main'">
    <xsl:call-template name="main" />
    </xsl:if>
    </xsl:for-each>
    </xsl:when>
    - <xsl:when test="@view='button'">
    - <xsl:for-each select="group">
    - <xsl:if test="@name='button'">
    <xsl:call-template name="button_root" />
    </xsl:if>
    </xsl:for-each>
    </xsl:when>
    - <xsl:otherwise>
    - <html>
    What's this view? (search_for_cals.xsl) -
    <xsl:value-of select="@view" />
    </html>
    </xsl:otherwise>
    </xsl:choose>
    </xsl:template>
    - <xsl:template name="search_toolbar">
    - <HTML>
    <xsl:call-template name="emit_frame_head_tag" />
    - <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
    marginwidth="0" marginheight="0" onload="window.focus()">
    - <FORM>
    - <xsl:attribute name="action">
    <xsl:value-of select="./formdata@action" />
    </xsl:attribute>
    <xsl:attribute name="name">form</xsl:attribute>
    <xsl:attribute name="onSubmit">document.forms[0]['find'].click(); return false;
    </xsl:attribute>
    <xsl:apply-templates select="formdata" />
    - <CENTER>
    - <TABLE border="0" cellpadding="2" cellspacing="0" width="100%" height="100%">
    - <TR>
    - <TD align="center">
    - <TABLE border="0" cellpadding="3" cellspacing="1">
    - <TR>
    - <TD colspan="4">
    <FONT size="{$font_size_big_2}" face="{$font_name}">Find all calendars where
    the calendar</FONT>
    </TD>
    </TR>
    - <TR>
    - <TD valign="baseline">
    - <FONT size="{$font_size_big_2}" face="{$font_name}">
    - <SELECT name="which">
    <OPTION value="name;calid">name or ID</OPTION>
    <OPTION value="name">name</OPTION>
    <OPTION value="primaryOwner">primary owner</OPTION>
    <OPTION value="calid">ID</OPTION>
    </SELECT>
    </FONT>
    </TD>
    - <TD valign="baseline">
    - <FONT size="{$font_size_big_2}" face="{$font_name}">
    - <SELECT name="how">
    <OPTION value="0">contains</OPTION>
    <OPTION value="1">begins with</OPTION>
    </SELECT>
    </FONT>
    </TD>
    - <TD valign="baseline">
    <INPUT type="text" name="what" />
    </TD>
    - <TD valign="baseline">
    - <FONT size="{$font_size_big_2}" face="{$font_name}">
    - <INPUT type="button" name="find" value="Find">
    - <xsl:attribute name="onClick">
    <xsl:value-of select="./button[@name='find']" />
    </xsl:attribute>
    </INPUT>
    </FONT>
    </TD>
    </TR>
    </TABLE>
    </TD>
    </TR>
    </TABLE>
    </CENTER>
    </FORM>
    </BODY>
    </HTML>
    </xsl:template>
    - <xsl:template name="main">
    - <HTML>
    <xsl:call-template name="emit_frame_head_tag" />
    - <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
    marginwidth="0" marginheight="0">
    - <FORM name="form" method="post">
    - <xsl:attribute name="action">
    <xsl:value-of select="./formdata@action" />
    </xsl:attribute>
    <xsl:attribute name="name">form</xsl:attribute>
    <xsl:apply-templates select="formdata" />
    <INPUT type="hidden" name="how" value="0" />
    <INPUT type="hidden" name="which" value="name;calid" />
    <INPUT type="hidden" name="what" value=" />
    <INPUT type="hidden" name="selectedGroup" />
    - <xsl:if test="(./calsearchresults/nomatch)">
    - <!-- print no match found
    -->
    &#38;nbsp;
    &#38;nbsp;
    No Match Found
    </xsl:if>
    - <xsl:for-each select="./calsearchresults/searchresultcal">
    - <P>
    &#38;nbsp;
    &#38;nbsp;
    - <FONT size="{$font_size_big_2}" face="{$font_name}">
    - <FONT size="{$font_size_big}" face="{$font_name}">
    Owner:
    <xsl:value-of select="@owner" />
    <FONT size="{$font_size_big}" face="{$font_name}" color="{$bgcolor_wend_mid}">|
    </FONT>
    Calendar ID:
    <xsl:value-of select="@id" />
    <BR />
    </FONT>
    - <FONT size="{$font_size_big_2}" face="{$font_name}">
    - <xsl:choose>
    - <xsl:when test="@subscribed='false'">
    &#38;nbsp;
    &#38;nbsp;
    - <INPUT type="checkbox" name="calendar">
    - <xsl:attribute name="value">
    <xsl:value-of select="@name" />
    </xsl:attribute>
    </INPUT>
    &#38;nbsp;
    &#38;nbsp;
    - <A target="_blank">
    - <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand" />
    </xsl:attribute>
    <xsl:value-of select="@name" />
    </A>
    </xsl:when>
    - <xsl:otherwise>
    &#38;nbsp;
    &#38;nbsp;
    - <A target="_blank">
    - <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand" />
    </xsl:attribute>
    <xsl:value-of select="@name" />
    </A>
    &#38;nbsp;
    (Subscribed)
    </xsl:otherwise>
    </xsl:choose>
    - <xsl:if test="string-length(@description) > 0">
    &#38;nbsp;
    &#38;nbsp;
    - <FONT size="{$font_size_big}" face="{$font_name}">
    <xsl:value-of select="@description" />
    </FONT>
    </xsl:if>
    </FONT>
    </FONT>
    </P>
    </xsl:for-each>
    </FORM>
    </BODY>
    </HTML>
    </xsl:template>
    </xsl:stylesheet>
    <P>
    <A HREF="#back">Back</A>
    <P>
    <HR>
    </A>
    <B>diffctx.txt</B>
    Index: search_for_calendars_common.xsl
    ===================================================================
    RCS file: /m/src/ns/server/msg/calendar/core/html/search_for_calendars_common.xsl,v
    retrieving revision 1.1.2.14
    diff -c -r1.1.2.14 search_for_calendars_common.xsl
    *** search_for_calendars_common.xsl 2000/12/12 23:10:43 1.1.2.14
    --- search_for_calendars_common.xsl 2001/03/15 23:55:19
    *** 182,188 ****
    &#38;nbsp; &#38;nbsp;
    <INPUT type="checkbox" name="calendar">
    <xsl:attribute name="value">
    ! <xsl:value-of select="@id"/>
    </xsl:attribute>
    </INPUT>
    &#38;nbsp; &#38;nbsp;
    --- 182,188 ----
    &#38;nbsp; &#38;nbsp;
    <INPUT type="checkbox" name="calendar">
    <xsl:attribute name="value">
    ! <xsl:value-of select="@name"/>
    </xsl:attribute>
    </INPUT>
    &#38;nbsp; &#38;nbsp;
    *** 190,196 ****
    <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand"/>
    </xsl:attribute>
    ! <xsl:value-of select="@id"/>
    </A>
    </xsl:when>
    <xsl:otherwise>
    --- 190,196 ----
    <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand"/>
    </xsl:attribute>
    ! <xsl:value-of select="@name"/>
    </A>
    </xsl:when>
    <xsl:otherwise>
    *** 199,205 ****
    <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand"/>
    </xsl:attribute>
    ! <xsl:value-of select="@id"/>
    </A>
    &#38;nbsp;(Subscribed)
    </xsl:otherwise>
    --- 199,205 ----
    <xsl:attribute name="href">
    <xsl:value-of select="@viewCommand"/>
    </xsl:attribute>
    ! <xsl:value-of select="@name"/>
    </A>
    &#38;nbsp;(Subscribed)
    </xsl:otherwise>
    <P>
    <A HREF="#back">Back</A>

    Maybe on the Google API s page?

  • How to modify the blob size, or how to set the size?

    i want to know how to modify the blob size, or how to set the size?
    what's the default size of blob?
    Thanks in advance.

    Blob datatype can contain binary data with a maximum size of 4 GB.
    when you enter 10kb file, the database will only use 10kb to store the file (depending on block size etc)
    if you want to modify the blob size, you may do like this:
    SQL> create materialized view t_mv refresh fast on commit
    2 as select id, dbms_lob.getlength(x) len from t;
    Materialized view created.
    SQL> alter table t_mv add constraint t_mv_chk check (len < 100);
    Table altered.

  • How to modify the timestamp in a msg file?

    Hi All,
    Do you know how to modify the timestamp in a msg file which was saved from Outlook Inbox. The mail subject and body are able to be modified by selecting
    Actions - Edit Message. But it looks like the mail timestamp and the To/Cc are not able to be modified.
    Thanks,
    高麻雀

    You can convert your MSG file(s) to EML format, edit Date: header in EML file with any plain text editor (like Notepad) and then convert it back to MSG.
    You can use free
    Convert Outlook MSG to EML Files and
    Convert EML Files to Outlook MSG utilities to perform the conversion.
    Alexey Kuznetsov,
    Relief Software
    More than 100 free add-ins for Outlook

  • How to modify the layout  and coding for 'RVORDER01' after copying ..

    Hi all,
       I am trying to modify standard script layout SALES ORDER for Quotation,
    i.e. I had copied standard form 'RVORDER01' to 'ZBAT_RVORDER01'.
    and now I am trying to compress the information box. But no box in the layout  was selecting while trying to resize it. Can any one help in this issue.
      And I also want to know, how to modify the coding in that standard script. i.e. to add a perform statement and etc..
    Thanks in advance,
    Surender.

    GOTO SE71, and give the form name as 'ZBAT_RVORDER01' and Language as DE, try to compress the box according to your requirement, save activate and return to SE71, now change the language to EN, you will see the compressed window in EN.
    The casue of your problem is the original language is in DE so window changes, character formats etc can be done in DE language or change original language to english,
    TO change original language to EN, SE71 ,FOrm name Language DE click change, goto utilities--> change Language.
    Regards,
    Sairam

  • How to modify the database by Oracle-ridc-client

    How to modify the database by Oracle-ridc-client

    First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
    While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

  • How to modify the standard script in scripts?

    how to modify the standard script in scripts?

    Nagaraju,
    Standard scripts cant be modified.
    Only thing is you need to copy it to z-form and have to do modifications as per ur requirements.
    Here is the procedure to copy standard form to z-form.
    goto SE71 t-code, then select the menu path : <b>Utilities -> Copy from Client</b>
    then it will take to another screen, give the form name as Standard form name, if u r copying a stadard invoice means, type RVINVOICE01 and target form, ZRVINVOICE01. Now press execute button, it will copy the form into 25 languages. Now come back to se71, enter Z-form name and do the required changes.
    Hope this hint may help you, Pls close the thread if u met with correct answer.
    Regards,
    Sujatha.

  • How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

    Dear Experts.
    How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
    I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
    http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
    The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
    Please help me with a suggestions.
    Thanks
    Regards
    Carmen G.

    Dear Kranthi..
    The datas of the Application is the following:
    General Information About the Application and Component
    Application: FITE_REQUEST
    Web Dynpro Component: FITV_FPM
    Window Information: FPM_WINDOW
    View Information: Layout_view
    Information on Field
    Field ID: HELPTEXT
    Type of UI Element : Explanation
    Attributes of UI Element
    TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
    I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
    Please can give more suggestions for found the method
    Thanks in advance
    Regards
    Carmen G.

  • How to modify the table control?

    Hi all,
    How to modify the table control after setting the lines  = 1. ie tbl_ctr-lines = 1.(tbl_ctr is the table control).
    Can anyone explain this with an example?
    Thanks.

    hi
    http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
    Regards
    pavan

  • NMP random crashes when modifying the timeline.

    FCPx is crashing/exiting when modifying the timeline.  Happens randomly few times an hour - sometimes more.  I updated all apps except going to YOSEMITE and it still crashes.
    I`ll paste a log report below for what its worth.
    Is there any apple staff that look at logs or is it just community aid?
    Thanks anyone who can advise!
    Process: Final Cut Pro [274]
    Path:          
    /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:    
    com.apple.FinalCut
    Version:       
    10.1.3 (251130)
    Build Info:    
    ProEditor-25113000038000000~1
    App Item ID:   
    424389933
    App External ID: 668174963
    Code Type:     
    X86-64 (Native)
    Parent Process:
    launchd [140]
    Responsible:   
    Final Cut Pro [274]
    User ID:       
    501
    Date/Time:     
    2014-10-28 22:19:51.027 -0400
    OS Version:    
    Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:
    BBE9B781-E2B2-6063-20AA-75CAA4074303
    Crashed Thread:
    0  Dispatch queue:
    com.apple.main-thread
    Exception Type:
    EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: EXC_I386_GPFLT
    Application Specific Information:
    objc_msgSend() selector name: respondsToSelector:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0 
    libobjc.A.dylib                 0x00007fff892e5097 objc_msgSend + 23
    1 
    com.apple.proapps.MIO           0x000000010c9eef71 -[MIOOutputCore outputDroppedFrames:] + 97
    2 
    com.apple.proapps.MIO           0x000000010c9cdf25 -[MIOOutputDevice
    setCMIODroppedFrames:] + 213
    3 
    com.apple.proapps.MIO           0x000000010c9cc8f9
    outputBufferUnderrunCountListenerProc(unsigned int, unsigned int,
    CMIOObjectPropertyAddress const*, void*) + 89
    4 
    com.apple.CoreMediaIO.FCPX.Lion 0x00000001102552b3
    CMIO::DAL::PropertyListener_Call_Helper(int, void*, void*, unsigned int,
    unsigned int, CMIOObjectPropertyAddress const*) + 123
    5 
    com.apple.CoreMediaIO.FCPX.Lion 0x00000001102550b5
    CMIO::DAL::PropertyListener::Call(unsigned int, unsigned int,
    CMIOObjectPropertyAddress const*) + 601
    6 
    com.apple.CoreMediaIO.FCPX.Lion 0x000000011025086b
    CMIO::DAL::Object::PropertiesChanged(unsigned int, CMIOObjectPropertyAddress
    const*) + 501
    7 
    com.apple.CoreMediaIO.FCPX.Lion 0x0000000110256efc
    CMIO::DAL::System::CMIOObjectPropertiesChanged(CMIOHardwarePlugInInterface**,
    unsigned int, unsigned int, CMIOObjectPropertyAddress const*) + 236
    8 
    com.apple.cmio.DAL.AJA          0x0000000139c4ca6b
    CMIO::DP::Object::PropertiesChanged(unsigned int, CMIOObjectPropertyAddress
    const*) const + 93
    9 
    com.apple.cmio.DAL.AJA          0x0000000139c59825
    CMIO::DP::Property::OutputBuffers::BumpUnderrunCount(bool) + 65
    10
    com.apple.cmio.DAL.AJA          0x0000000139c5f2c8
    CMIO::DP::AJA::Stream::UpdatePropertyState(CMIO::PropertyAddress const&,
    bool) + 1056
    11
    com.apple.cmio.DAL.AJA          0x0000000139c5b226
    CMIO::DP::AJA::Device::UpdatePropertyStates() + 752
    12
    com.apple.cmio.DAL.AJA          0x0000000139c59b13
    CMIO::DP::AJA::Device::Event(__CFMachPort*, mach_msg_header_t*, long,
    CMIO::DP::AJA::Device&) + 81
    13
    com.apple.CoreFoundation        0x00007fff8b0c89c4 __CFMachPortPerform + 388
    14
    com.apple.CoreFoundation        0x00007fff8b0c8829
    __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 41
    15
    com.apple.CoreFoundation        0x00007fff8b0c879e __CFRunLoopDoSource1 + 478
    16  com.apple.CoreFoundation        0x00007fff8b0b97d6
    __CFRunLoopRun + 1830
    17
    com.apple.CoreFoundation        0x00007fff8b0b8e75 CFRunLoopRunSpecific + 309
    18
    com.apple.HIToolbox             0x00007fff92ebda0d RunCurrentEventLoopInMode +
    226
    19
    com.apple.HIToolbox             0x00007fff92ebd685 ReceiveNextEventCommon +
    173
    20
    com.apple.HIToolbox             0x00007fff92ebd5bc
    _BlockUntilNextEventMatchingListInModeWithFilter + 65
    21
    com.apple.AppKit                0x00007fff8bea424e _DPSNextEvent + 1434
    22
    com.apple.AppKit                0x00007fff8bea389b -[NSApplication
    nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
    23
    com.apple.TLKEventDispatcher    0x000000010e808668 -[TLKEventDispatcher
    _startTrackingLoop] + 399
    24
    com.apple.TLKEventDispatcher    0x000000010e8097a6 -[TLKEventDispatcher
    _evaluateEventDescription:withEventContext:] + 492
    25
    com.apple.TLKEventDispatcher    0x000000010e8091b0 -[TLKEventDispatcher
    dispatchEvent:] + 335
    26
    com.apple.TLKEventDispatcher    0x000000010e806c76 -[TLKEventDispatcher
    mouseDown:] + 156
    27
    com.apple.AppKit                0x00007fff8c0a4aea forwardMethod + 122
    28
    com.apple.AppKit                0x00007fff8c0a8a58 -[NSWindow sendEvent:] +
    11296
    29
    com.apple.prokit                0x000000010ac119a4 -[NSProWindow sendEvent:] +
    236
    30
    com.apple.AppKit                0x00007fff8c0475d4 -[NSApplication sendEvent:]
    + 2021
    31
    com.apple.prokit                0x000000010abefd29 -[NSProApplication
    sendEvent:] + 129
    32
    com.apple.Flexo                 0x000000010b1c1404 -[FFApplication sendEvent:]
    + 548
    33
    com.apple.AppKit                0x00007fff8be979f9 -[NSApplication run] + 646
    34
    com.apple.prokit                0x000000010abf05d5 NSProApplicationMain + 333
    35
    com.apple.FinalCut              0x000000010a8a508b main + 1355
    36
    libdyld.dylib                   0x00007fff89cf15fd start + 1
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0 
    libsystem_kernel.dylib          0x00007fff91d77662 kevent64 + 10
    1 
    libdispatch.dylib               0x00007fff91d9b421 _dispatch_mgr_invoke + 239
    2 
    libdispatch.dylib               0x00007fff91d9b136 _dispatch_mgr_thread + 52
    Thread 2:: com.apple.ProGL.object-deletion
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b
    _pthread_cond_wait + 727
    2 
    com.apple.progl.framework       0x000000010cefa490 (anonymous
    namespace)::threadFunc(void*) + 71
    3 
    com.apple.procore.framework     0x000000010aa1f03f PCThread::startup(void*) +
    29
    4 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    5 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    6 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 3:: MIO Mounting Thread
    0   libsystem_kernel.dylib          0x00007fff91d76716
    __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c77 _pthread_cond_wait + 787
    2 
    com.apple.Foundation            0x00007fff8d702fc0 -[NSCondition
    waitUntilDate:] + 344
    3   com.apple.Foundation            0x00007fff8d6f9e68
    -[NSConditionLock lockWhenCondition:beforeDate:] + 232
    4 
    com.apple.proapps.MIO           0x000000010c9d2dcd -[PluginLockPair scanPaths]
    + 189
    5 
    com.apple.Foundation            0x00007fff8d731dfb __NSThread__main__ + 1318
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 4:: MIO Mounting Thread
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c77 _pthread_cond_wait + 787
    2 
    com.apple.Foundation            0x00007fff8d702fc0 -[NSCondition
    waitUntilDate:] + 344
    3   com.apple.Foundation            0x00007fff8d6f9e68
    -[NSConditionLock lockWhenCondition:beforeDate:] + 232
    4 
    com.apple.proapps.MIO           0x000000010c9d2dcd -[PluginLockPair scanPaths]
    + 189
    5 
    com.apple.Foundation            0x00007fff8d731dfb __NSThread__main__ + 1318
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 5:: MIO Mounting Thread
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c77 _pthread_cond_wait + 787
    2 
    com.apple.Foundation            0x00007fff8d702fc0 -[NSCondition
    waitUntilDate:] + 344
    3 
    com.apple.Foundation            0x00007fff8d6f9e68 -[NSConditionLock
    lockWhenCondition:beforeDate:] + 232
    4 
    com.apple.proapps.MIO           0x000000010c9d2dcd -[PluginLockPair scanPaths]
    + 189
    5 
    com.apple.Foundation            0x00007fff8d731dfb __NSThread__main__ + 1318
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 6:: MIO Mounting Thread
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c77 _pthread_cond_wait + 787
    2 
    com.apple.Foundation            0x00007fff8d702fc0 -[NSCondition
    waitUntilDate:] + 344
    3 
    com.apple.Foundation            0x00007fff8d6f9e68 -[NSConditionLock
    lockWhenCondition:beforeDate:] + 232
    4 
    com.apple.proapps.MIO           0x000000010c9d2dcd -[PluginLockPair scanPaths]
    + 189
    5 
    com.apple.Foundation            0x00007fff8d731dfb __NSThread__main__ + 1318
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 7:: MIO Mounting Thread
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c77 _pthread_cond_wait + 787
    2 
    com.apple.Foundation            0x00007fff8d702fc0 -[NSCondition waitUntilDate:]
    + 344
    3 
    com.apple.Foundation            0x00007fff8d6f9e68 -[NSConditionLock
    lockWhenCondition:beforeDate:] + 232
    4 
    com.apple.proapps.MIO           0x000000010c9d2dcd -[PluginLockPair scanPaths]
    + 189
    5 
    com.apple.Foundation            0x00007fff8d731dfb __NSThread__main__ + 1318
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 8:: com.apple.dvdplayback-DDPTask
    0 
    libsystem_kernel.dylib          0x00007fff91d72a56 semaphore_wait_trap + 10
    1 
    com.apple.AVCHDPlugin           0x0000000132ebf787
    semaphore_wait(viona_semaphore_t*) + 39
    2 
    com.apple.AVCHDPlugin           0x0000000132ecafba
    WinPortServer::ProcessMessages() + 90
    3 
    com.apple.AVCHDPlugin           0x0000000132e7b3d8 0x132e19000 + 402392
    4 
    com.apple.AVCHDPlugin           0x0000000132ebfd52
    ST20Thread::Run(PThreadRunParams*) + 34
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    Thread 9:: com.apple.helium-texture-finish
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e8f0497
    textureFinishThread(void*) + 183
    3 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    4 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    5 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 10:: com.apple.helium.rq.gpu-ru0.vs0
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8   libsystem_pthread.dylib         0x00007fff93e22fc9
    thread_start + 13
    Thread 11:: com.apple.helium.rq.gpu-ru1.vs0
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 12:: com.apple.helium.rq.gpu-cu2.vs0
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6   libsystem_pthread.dylib         0x00007fff93e1e899
    _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 13:: com.apple.helium.rq.pbo-rbu0.vs0
    0   libsystem_kernel.dylib          0x00007fff91d76716
    __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 14:: com.apple.helium.rq.pbo-rbu1.vs0
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3   com.apple.Helium.HeliumRender
      0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 15:: com.apple.helium.rq.pbo-rbu2.vs0
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6   libsystem_pthread.dylib         0x00007fff93e1e72a
    _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 16:: com.apple.helium-texture-finish
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1   libsystem_pthread.dylib         0x00007fff93e20c3b
    _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e8f0497
    textureFinishThread(void*) + 183
    3 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    4 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    5 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 17:: com.apple.helium.rq.gpu-ru3.vs1
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 18:: com.apple.helium.rq.gpu-ru4.vs1
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6   libsystem_pthread.dylib         0x00007fff93e1e899
    _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 19:: com.apple.helium.rq.gpu-cu5.vs1
    0   libsystem_kernel.dylib          0x00007fff91d76716
    __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86b1b2
    HGRenderQueue::GetRenderJob(HGRenderExecUnit*, HGRenderJob**) + 498
    4 
    com.apple.Helium.HeliumRender   0x000000010e859857
    HGRenderExecUnit::RunLoop() + 183
    5 
    com.apple.Helium.HeliumRender   0x000000010e859794
    StartRenderExecUnitFunc(void*) + 20
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8   libsystem_pthread.dylib         0x00007fff93e22fc9
    thread_start + 13
    Thread 20:: com.apple.helium.rq.pbo-rbu3.vs1
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 21:: com.apple.helium.rq.pbo-rbu4.vs1
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 22:: com.apple.helium.rq.pbo-rbu5.vs1
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.Helium.HeliumRender   0x000000010e96362e
    HGSynchronizable::Wait() + 46
    3 
    com.apple.Helium.HeliumRender   0x000000010e86dab7
    HGRenderQueue::GetPBOReadbackJob(HGPBOReadbackExecUnit*, HGPBOReadbackJob**) +
    87
    4 
    com.apple.Helium.HeliumRender   0x000000010e857f3f
    StartPBOExecUnitFunc(void*) + 143
    5 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    6 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    7 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 23:: com.apple.coremedia.scheduledfileio
    0 
    libsystem_kernel.dylib          0x00007fff91d76716 __psynch_cvwait + 10
    1 
    libsystem_pthread.dylib         0x00007fff93e20c3b _pthread_cond_wait + 727
    2 
    com.apple.CoreMedia.ProAppsSupport    0x000000010ab7fc37
    WaitOnCondition + 11
    3 
    com.apple.CoreMedia.ProAppsSupport    0x000000010ab7fa4b
    FigSemaphoreWaitRelative + 133
    4 
    com.apple.CoreMedia.ProAppsSupport    0x000000010ab7ad0e
    FigScheduledFileIOThread + 141
    5 
    com.apple.CoreMedia.ProAppsSupport    0x000000010ab8058b
    figThreadMain + 382
    6 
    libsystem_pthread.dylib         0x00007fff93e1e899 _pthread_body + 138
    7 
    libsystem_pthread.dylib         0x00007fff93e1e72a _pthread_start + 137
    8 
    libsystem_pthread.dylib         0x00007fff93e22fc9 thread_start + 13
    Thread 24:: CVDisplayLink

    So a guy goes into his doctors office and tells his doctor "Ya gotta
    help me doc...it hurts when I run my head into the door like
    this...OW!". Then the doctor says:
    "DON'T DO THAT ANY MORE!!!"
    (I promise to keep my day job...oops what job...and not go into
    comedy..)
    Why don't you convert all the old 16 bit code into 32 bit code and
    create one application where the various parts all know about each
    other? I don't think that there's any way to coordinate an old 16 bit
    LV and a new 32 bit LV application so that they don't step on each
    other driverwise like they appear to be doing. I don't think that the
    two LabVIEW's even know that the other exists!
    Alternatively, get a second computer to run the 16 bit code on and
    make the two apps communicate with
    each other using TCP/IP or serial.
    Doug De Clue
    [email protected]
    cincidude wrote in message news:<[email protected]>...
    > I am using 2 versions of Labview at the same time, one is version 4
    > which has a camera and a weigh-in-motion scale attached to it. The
    > second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
    > i'm not sure. The sixteen bit has a data acquisition system attached
    > to it. Its an optim electronics system and the 16-bit Labview drivers
    > for the optim were provided by Optim electronics and so I am stuck
    > with using the same system. When I use both these systems in tandem,
    > the system crashes frequently, but both systems run fine
    > independently. It usually just freezes up or says "Illegal operation
    > performed. Contact program vendor". Its a windows error with a red
    > cross.

Maybe you are looking for

  • Transaction MM60 printing multiple lines for the same information

    Transaction MM60 is printing the same information multiple times, meaning that the same materail is printing multiple times with the exact same information.  Any ideas why?

  • Iphone 5 is stuck in restore mode, How can l fix it?

    Everytime l try to download the current version of itunes (phone is already up to date), it gets half way and then stops due to network connection error? Now my phone is useless and cant be used at all. Is there any way l can get my phone back up and

  • For  David Powers ?

    David, Hope you having a good break from here - as you've not been around for a few days. When you are back - I need a little help please ~Malcolm N.... ~

  • Stock check error message in serial numbers problem

    Dear Experts, In serial number profiles i did the stock check indicator to give an error message if there were incosistinces in stock data, now this is the scenario: after doing an external maintenance order and creating a PO with reference to the ma

  • Export a CS3 InD .inx file in your CS2 for my CS?  Please?

    it is my understanding that to open an .inx file from CS3 in CS it must first be opened and exported as an .inx in CS2.  Correct?  If so, is there anyone out there with CS2 who would be willing to export a file for me?  I greatly appreciate your help