How to modify transmit power output in my WRT1900AC ?

Hi Guys, I just opened up my new WRT1900AC, I love it so far. However I have one or two problems, that someone can help me resolve 1. I want to adjust the transmit power, on 2.4 and 5.0, like I can in my old Airport Extreme. Can I do this on a WRT1900AC ? Can someone suggest this as a frimware update ? 2. SUGGESTION TO LINKSYS :->I think instead of confusing people by telling them to go to linksyssmartwifi.com , perhaps it would be better to tell them to connect to the router's default wireless network SSID/password, and open a browser to 192.168.1.1 . This is not clear to new users whom have never used a wifi before.

I forgot that there is a hidden advanced wireless setting page on Smart Wifi Routers When accessing the router replace the end of the URL with the "advanced-wireless.html". Ex:http://www.linksyssmartwifi.com/ui/1.0.99.166845/dynamic/home.html Change to: http://www.linksyssmartwifi.com/ui/1.0.99.166845/dynamic/advanced-wireless.html

Similar Messages

How to modify this query to get the desired output format

I hv written a Query to display all the parent table names and their primary key columns(relevant to this foreign key of the child table).The query is given below...
SELECT DISTINCT(TABLE_NAME) AS PARENT_TABLE,COLUMN_NAME AS PARENT_COLUMN
FROM ALL_CONS_COLUMNS
WHERE CONSTRAINT_NAME IN (SELECT AC.R_CONSTRAINT_NAME
FROM ALL_CONSTRAINTS AC
WHERE AC.TABLE_NAME=TABLE_NAME
AND AC.TABLE_NAME='&TABLE'
AND AC.R_CONSTRAINT_NAME IS NOT NULL);
This query will display all the parent tables and their primary key columns.Now my problem is that how to modify this query to also display the foreign key column name of the child table.
I want the query result in the following format.The query should display the following columns.1)child table's name,2)child table's foreign key column name,3)the corresponding parent table's name,4)the parent table's primary key column name(which is the foreign key in the child table).
For Example I want the output as follows...
TAKE THE CASE OF SCOTT.EMP(AS INPUT TO YOUR QUERY)
CHILD_TABLE CHILD_COLUMN PARENT_TABLE PARENT_COLUMN
EMP DEPTNO DEPT DEPTNO
In this result I hv used alias name for the columns.The query should display this only for the foreign keys in the child table.In the query which I sent to you earlier will give the parent table and the parent column names,But I also want to append the child table and child column names there.
any help on how to tackle would be appreciated.

Try this query
SELECT c.table_name child_table,
     c.column_name child_column,
     p.table_name parent_table,
     p.column_name parent_column
FROM user_constraints a,user_constraints b,user_cons_columns c,
     user_cons_columns p
WHERE a.r_constraint_name=b.constraint_name and
      a.constraint_name=c.constraint_name and
      b.constraint_name=p.constraint_name and
      c.position=p.position
ORDER BY c.constraint_name,c.position
Anwar

How to modify fbz5 standard program output form

Hi friends
I need to modify the output print form of the standard program FBZ5 how to modify it.
where is the driver program for this form.

Selva,
Below is the path in SPRO to find the Driver Program and the Form for the respective Company Codes based on the Correspondence types.
SPRO>>Financial Accounting (New)>>Financial Accounting Global Settings ( New ) >> Correspondence
or
You can put a break point on the FM FORM_CHECK and run FBZ5 in D or Q.
K.Kiran.

How to adjust power output of time capsule

I was told that the power output of the time capsule is adjustable and that Apple does not ship the units at full power. Is this correct?

All of them are defaulted to 100%.. and you cannot adjust the actual power output.. You can reduce the wireless in steps of 25%.
Click on Transmit power.. you are offered.. 10% 25% 50% 75% and 100%. Yet to see anyone set to a lower value.. their wireless output is to be frank.. low.. at the best of time.
Max wireless output is regulated in different markets.. so each TC is set to a region to ensure it complies to local regs. And you cannot change the region (you can change between a few countries in a region.. like european ones.. but all follow Euro ETSI codes) on a TC .. it is locked into firmware.

Will the Ipad power adapter operate safely from the modified sine-wave output from a 12VDC-240VAC inverter?

Will the power adapter for the Ipad Air operate safely on the modified sine-wave output from a 12 VDC-240VAC inverter?

I am not sure why you want to do that...the power adapter takes 100-240 volts AC at 50-60 Hz and converts that to 5 to 5.1 volts DC at about 2 amps. Why are you inverting 12 VDC to 240 VAC then back to 5 VDC?
It should handle that easily, but seems like a long round about way of getting there.

How do I get the 600 ex-rt off of ratios and put in power output?

I can't find it anywhere in my manual or the custom functions. For instance, it is showing the ratio of 1:4 instead of the power output of 1/4 power.
I am using a Mark III.
Thank you!

You have to put it in manual mode, instead of eTTL.

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to modify the search results of the GUI for subscribing to calendars

How to modify the search results of the GUI for subscribing to calendars
Note:
<OL>
<LI>The following information applies only to iPlanet Calendar Server 5.0
Patch 3.
<LI>All of the cases for which the XSLT changes will work have not been
verified.
<LI>The following is only an example of an XSLT customization.
</OL>
The example below shows a sample customization of the
search_for_calendars
dialog. This customization will result in the Display Name being included as
part of the search results in the GUI, which would normally show just the
calendar ID. It will render the returned calendars in the following format:
<P>
Display Name - <I>description</I>
<P>
Normally, the format would be as follows:
<P>
Calendar-ID - <I>description</I>
<P>
</A>
The example consists of the following two files:
<P>
<OL>
<LI>search_for_calendars_common.xsl
(the entire XSLT file)
<P>
<LI>diffctx.txt
(the context sensitive diff patch file,
which basically shows only the changes that need to be made)
</OL>
<P>
<HR>
</A><B>
search_for_calendars_common.xsl</B>
<?xml version="1.0" ?>
<!DOCTYPE xsl:stylesheet (View Source for full doctype...)>
- 
- <xsl:stylesheet xmlns:xsl="http://www.w3.org/XSL/Transform/1.0">
- 
<xsl:output method="html" encoding="ISO-8859-1" />
<xsl:include href="data/common.xsl" />
<xsl:include href="data/i18n.xsl" />
<xsl:include href="data/date_format.xsl" />
<xsl:include href="data/dialog_tabs.xsl" />
- <xsl:template match="/">
<xsl:apply-templates select="calendar" />
</xsl:template>
- <xsl:template match="calendar">
- <xsl:choose>
- <xsl:when test="@top='true'">
- <xsl:variable name="Frame1">
<xsl:value-of select="frame[1]" />
</xsl:variable>
- <xsl:variable name="Frame2">
<xsl:value-of select="frame[2]" />
</xsl:variable>
- <xsl:variable name="Frame3">
<xsl:value-of select="frame[3]" />
</xsl:variable>
- <xsl:variable name="tab_value">
<xsl:value-of select="@tab" />
</xsl:variable>
- <HTML>
- <HEAD>
<xsl:call-template name="contextJavascript" />
<TITLE>Calendars Search: Calendar Express - iPlanet</TITLE>
</HEAD>
- <FRAMESET border="0" frameborder="0" rows="77,*,71">
<FRAME name="tab" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" src="{$Frame1}" />
<FRAME name="main" frameborder="0" src="{$Frame2}" />
<FRAME name="button" marginheight="0" marginwidth="0" scrolling="no"
scrollbars="no" frameborder="0" src="{$Frame3}" />
</FRAMESET>
</HTML>
</xsl:when>
- <xsl:when test="@view='searchProperties'">
- <xsl:for-each select="group">
- <xsl:if test="@name='searchProperties'">
<xsl:call-template name="search_toolbar" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='main'">
- <xsl:for-each select="group">
- <xsl:if test="@name='main'">
<xsl:call-template name="main" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:when test="@view='button'">
- <xsl:for-each select="group">
- <xsl:if test="@name='button'">
<xsl:call-template name="button_root" />
</xsl:if>
</xsl:for-each>
</xsl:when>
- <xsl:otherwise>
- <html>
What's this view? (search_for_cals.xsl) -
<xsl:value-of select="@view" />
</html>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
- <xsl:template name="search_toolbar">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0" onload="window.focus()">
- <FORM>
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:attribute name="onSubmit">document.forms[0]['find'].click(); return false;
</xsl:attribute>
<xsl:apply-templates select="formdata" />
- <CENTER>
- <TABLE border="0" cellpadding="2" cellspacing="0" width="100%" height="100%">
- <TR>
- <TD align="center">
- <TABLE border="0" cellpadding="3" cellspacing="1">
- <TR>
- <TD colspan="4">
<FONT size="{$font_size_big_2}" face="{$font_name}">Find all calendars where
the calendar</FONT>
</TD>
</TR>
- <TR>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="which">
<OPTION value="name;calid">name or ID</OPTION>
<OPTION value="name">name</OPTION>
<OPTION value="primaryOwner">primary owner</OPTION>
<OPTION value="calid">ID</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <SELECT name="how">
<OPTION value="0">contains</OPTION>
<OPTION value="1">begins with</OPTION>
</SELECT>
</FONT>
</TD>
- <TD valign="baseline">
<INPUT type="text" name="what" />
</TD>
- <TD valign="baseline">
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <INPUT type="button" name="find" value="Find">
- <xsl:attribute name="onClick">
<xsl:value-of select="./button[@name='find']" />
</xsl:attribute>
</INPUT>
</FONT>
</TD>
</TR>
</TABLE>
</TD>
</TR>
</TABLE>
</CENTER>
</FORM>
</BODY>
</HTML>
</xsl:template>
- <xsl:template name="main">
- <HTML>
<xsl:call-template name="emit_frame_head_tag" />
- <BODY bgcolor="{$bgcolor_background}" background="imx/tdbg.gif"
marginwidth="0" marginheight="0">
- <FORM name="form" method="post">
- <xsl:attribute name="action">
<xsl:value-of select="./formdata@action" />
</xsl:attribute>
<xsl:attribute name="name">form</xsl:attribute>
<xsl:apply-templates select="formdata" />
<INPUT type="hidden" name="how" value="0" />
<INPUT type="hidden" name="which" value="name;calid" />
<INPUT type="hidden" name="what" value=" />
<INPUT type="hidden" name="selectedGroup" />
- <xsl:if test="(./calsearchresults/nomatch)">
- 
&nbsp;
&nbsp;
No Match Found
</xsl:if>
- <xsl:for-each select="./calsearchresults/searchresultcal">
- <P>
&nbsp;
&nbsp;
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <FONT size="{$font_size_big}" face="{$font_name}">
Owner:
<xsl:value-of select="@owner" />
<FONT size="{$font_size_big}" face="{$font_name}" color="{$bgcolor_wend_mid}">|
</FONT>
Calendar ID:
<xsl:value-of select="@id" />
<BR />
</FONT>
- <FONT size="{$font_size_big_2}" face="{$font_name}">
- <xsl:choose>
- <xsl:when test="@subscribed='false'">
&nbsp;
&nbsp;
- <INPUT type="checkbox" name="calendar">
- <xsl:attribute name="value">
<xsl:value-of select="@name" />
</xsl:attribute>
</INPUT>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
</xsl:when>
- <xsl:otherwise>
&nbsp;
&nbsp;
- <A target="_blank">
- <xsl:attribute name="href">
<xsl:value-of select="@viewCommand" />
</xsl:attribute>
<xsl:value-of select="@name" />
</A>
&nbsp;
(Subscribed)
</xsl:otherwise>
</xsl:choose>
- <xsl:if test="string-length(@description) > 0">
&nbsp;
&nbsp;
- <FONT size="{$font_size_big}" face="{$font_name}">
<xsl:value-of select="@description" />
</FONT>
</xsl:if>
</FONT>
</FONT>
</P>
</xsl:for-each>
</FORM>
</BODY>
</HTML>
</xsl:template>
</xsl:stylesheet>
<P>
<A HREF="#back">Back</A>
<P>
<HR>
</A>
<B>diffctx.txt</B>
Index: search_for_calendars_common.xsl
===================================================================
RCS file: /m/src/ns/server/msg/calendar/core/html/search_for_calendars_common.xsl,v
retrieving revision 1.1.2.14
diff -c -r1.1.2.14 search_for_calendars_common.xsl
*** search_for_calendars_common.xsl 2000/12/12 23:10:43 1.1.2.14
--- search_for_calendars_common.xsl 2001/03/15 23:55:19
*** 182,188 ****
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@id"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
--- 182,188 ----
&nbsp; &nbsp;
<INPUT type="checkbox" name="calendar">
<xsl:attribute name="value">
! <xsl:value-of select="@name"/>
</xsl:attribute>
</INPUT>
&nbsp; &nbsp;
*** 190,196 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
</xsl:when>
<xsl:otherwise>
--- 190,196 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
</xsl:when>
<xsl:otherwise>
*** 199,205 ****
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@id"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
--- 199,205 ----
<xsl:attribute name="href">
<xsl:value-of select="@viewCommand"/>
</xsl:attribute>
! <xsl:value-of select="@name"/>
</A>
&nbsp;(Subscribed)
</xsl:otherwise>
<P>
<A HREF="#back">Back</A>

Maybe on the Google API s page?

How to modify a variant

How to modify the variant for a batch job, which is to include 2 countries for a job. Please let me know the tcode.

use t.code SM37.
Enter the job name and execute. Then in the output, check the job and click on step button. Keep the cursor on the program name for which you want to change the variant. Then go to menu Goto->varinats.
Click on the values button at the top. There you can change the values. Once changed click on save button.
Alternatively you can use t.code SE38, enter the program name here. Then execute. Click on the variants button and select the variant. Then change the values and click on save button. By this way you can overwrite the variant value.
Regards

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

How to modify scripts

I wanna to know how do I modify the standard SAP scripts, I hv to copy the script to my own program starting with z or y, bt after that how to modify the script, plz help me in this regard

Hi
Welcome to SDN forum
See the process of modifying the scripts and do accordingly
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms.
Regards
Anji

FP-CTR-500 and Frequency Measurement: How to modify it to report the frequency (0-10 Hz) every one minute?

How to modify "Frequency Measurement" to report the frequency every one minute?
The signal frequencies vary from 0 to 10 Hz (see the analog output plot and attached sample data file), so I want record the average frequency every one minute.
Software: Labview 8.5
Hardware: FP-CTR-500
Program: "Frequency Measurement" --build in and under "NI example finder", It was attached with this message.
Physical wiring: (1) The signal I want to measure to count input 1 (pins 2 and 18). it is a pulse signal (range from 0 to 1 V, see the plot and attached data file).
(2) Wire Output 0 (pin 130 to gate 0 (pin 9). Do com pins 26 and 30 need to wire together?
FP-CTR-5000 was set up in Max based on the program instructions. I have tried different gating pulse frequency, my readings are always "0".
Attachments:
H2O_20130809.xlsx ‏18 KB
Frequency Measurement.vi ‏35 KB

CTR-500 high pulse is >=10V. Hence, it always read your pulse as low. With this low voltage pulse, you must use analog input module, and write a program to read pulse from analog level. You must also make sure that you pulse is not so narrow that cFP loop is not fast enough to capture voltage change.

Changing power output for Airport Extreme Card

How do you change the power output for the Airport Extreme Card? Is there a program that I can download to change airport's settings or the Airport Extreme Card's settings?
i.e. If the default power output for the Airport Extreme Card is 18mW, I would like to increase it to 25mW.

There is no way for a user to control the power output of the AirPort Extreme card.
Furthermore if the card was manufactured to output 18mW there is no magical way to increase it's physical ability so it can output more power.

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

How to modify smartforms

Hi
I know scripts,I know how to create smartforms, but i don't know how to modify existing smartforms. I want total process like copy the smartform,where we have to write code,where we have to see the output each and every thing.
thankyou

Hi,
See all these links:
This is the Best link:http://www.****************/Tutorials/smartforms
steps:
1.goto smartforms.
2.copy the standard form into the Zsmartform.
utilities --->copy from clients.
3.make changes.
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Regards,
Kumar(Reward if helpful with points).
Edited by: shiva kumar on Apr 15, 2008 1:16 PM

How to modify transmit power output in my WRT1900AC ?

Similar Messages

Maybe you are looking for