How to monitor a RAID-1 in Mac mini Server 10.6.8

Morning.
I've configured the two internal HDDs as an RAID-1. Now I'ld like to be alerted if one of the drives is running to fail, so that I can early enough change this drive.
Does the operating system offers such functionality, or is there a third party application to monitor the RAID and send alerts by email if something goes wrong?
Thanks in advance! Kind regards, Friedrich

http://www.hanynet.com/raideye/

Similar Messages

How can I create RAID 1 on Mac mini server just now from box.

I bought my Mac mini server two days ago and decided that 1Tb + 1Tb HDD are very good for RAID 1 (mirroring).
Thinking - doing ... Open Disk Utility, try to change and create RAID. Nothing. Try to reinstall OS X - recovery part are on disk all time.
Does anybody can help me to create what I want and how to do this with minimum energy. Thanks a lot.

Start from an Internet Recovery which boots you into it's own Recovery Partition. From there use Disk Utility to put your 2 drives into RAID 1. Reinstall OS X from the Internet Recovery once you have done that and install everything else as you need to.
Be aware that RAID volumes do not have their own Recovery Partition so you will need to either have an external drive with an RP to boot into else you will need to use Internet Recovery each time (which is around a 650MB download).

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

How to use webmail address book on Mac Mini Server with Lion Server.

I have a Mac Mini Server with Lion Server installed; the webmail is setup and working but I can not get the address book to work.
I have followed an instruction from this website on how to activate the address book icon in webmail but can not add any addresses. Is there something that needs to be activatied before it will work?

No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

How to access second TB HD on Mac Mini Server?

I've loaded up the first TB of my 2TB Mac Mini Server HD but for some reason I can't access the second TB. I checked Disk Utility and it didn't seem as though it was a partition issue because isn't there two separate 1TB HD's? How do I access it? How do I begin saving to it? The new episodes of SUITS won't be able to fit into 4.46 GB's of space

Your are correct SSR . . . I realized that after I made the post. Question is, how do I break the RAID. I've got it all backed up to the Time Machine if I need to wipe it, but I'm wondering if there is another option.

Can I set up RAID 1 in Mac Mini Server?

Sorry if I am in the wrong forum, but would like to know if the new Mac Mini server can be set up as RAID 1 or 0 and does it require reinstalling OS after formatting, or it comes already in RAID?
thanks,

Officially, yes, you need to off-load to a backup, configure the RAID-1, and reload onto the mirrorset.
If you're feeling lucky, you can potentially [activate RAID-1 without the archive|http://www.afp548.com/article.php?story=20040827122302975]; on-line. Search for (other) discussions of using the DiskUtil tool and enabling disk mirroring for various of the previous discussions.
But if something goes wrong with the on-line conversion, a bug or a power drop-out or a disk glitch or or... ?
RAID-0 is striping; two disks together presented as one bigger disk; targets I/O performance.
RAID-1 is mirroring; two disks together presented as one; targets reliability.
RAID-0 and RAID-1 (and the other RAID levels) can be hardware-based or software based.
The Mac Mini Server uses software-based RAID.
And for completeness, neither RAID-0 nor RAID-1 is an archival strategy.
As for the other question, do you have one disk showing, or two? If two, you're not running RAID-1. All of the Mac Mini Server boxes I've seen have arrived not configured for RAID-1. They've arrived as two single disks; as what the RAID folks tend to call JBOD; Just a Bunch Of Disks.

Setting up RAID on a Mac Mini Server

I just bought a new Mac Mini server with two 750GB drives. I'd like to use the RAID utility to set them up in a RAID 1 array so I have 1 logical 1.5TB drive. However, the utility won't allow me to drag the primary drive into a configuration. I assume this is because it's the boot drive.
Is there any way to do what I'm trying to do?
Thanks!
David

David,
Does it allow it if you boot to the Restore Partition with CMD+r ?
If not,do you have an external drive to Restore to & boot from?

How do i wipe a late 2012 mac mini server for resale?

I am wanting to sell my late 2012 Mac Mini Server and i would like to wipe and reset it.

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How do i make HD2 on my mac mini server useable by my networked macbook pro for time machine?

What do I need to do to make HD2 on my new Mac Mini server useable for Time Machine on my MacBook Pro? I can access the server, but HD2 is not visible, although I have set it up to let everyone have read/write permission.

FWIW, I personally would not use any disk drive that is internal
to a Mini for a backup of anything. The reason for that is if something
should happen to the Mini, your backup will be unavailable. And of
course, that is when you will need the backup, Murphy's Law. getting a
drive out of a Mini is no small task.
Personally, I keep any backups on external drives, as they can be
easily moved and replaced.
The only case where I would keep a backup internal to a computer
would be in the case of a Mac Pro where you can easily remove and
swap hard drives.
Just something to consider.

How To Set Up Mountain Lion Server/Point DNS to Mac Mini Server

Hello, First of all I have no experience with setting up servers whatsoever. Below is what I have
- Mac Mini with Mountain Lion Server
- Time Capsule as my router
- Comcast as my service provider
My goal is to set up my MacMini as a sharepoint for files and other data with my other partners.
- I have purchased a domaine name from NetworkSolutions. Does this mean that they are my DNS hosting as well? Not really sure. My biggest question is how to point my DNS to my mac mini server correctly.
1. How do you point the DNS to my mac mini server.
2. I've read somewhere to use the IP address from my mac mini server. The only IP address I see is from my Time Capsule (router). I know what my public IP adress is but I am not sure if that's the one to use. I think once I figure this DNS thing I can figure out the rest.
Thanks - Need lots of help.

Here's a detailed write-up on setting up internal (private) DNS on OS X Server, and no, you're probably not going to be setting up external DNS on your servers. Your public DNS service will be hosted on and served from the Network Solutions DNS servers.

How can i access mac mini server from iPad?

how can i access my files in mac mini server using an ipad2? what apps do i need?

Hi,
I found an App called iTeleport. Have a look.

How do I rename my mac mini server

How do I rename my late 2012 Mac Mini Server?
Processor 2.3 GHz Intel Core i7
Memory    4     GB 1600 MHz DDR3
Graphics   Intel HD Graphics 4000 1024 MB
Software    OS X 10.9.2
I was told that using the command line, type:
sudo -s enter password, next
csutil --set HostName example.com
scutil --set ComputerName whatever
scutil --set LocalHostName whatever
I was also told that this may work well on new installations, but there may be a different procedure for renaming.
Is anyone acquainted with these procedures?
Thanks Everyone.
KeithO Ep

See Transferring files between two computers using FireWire.
Boot the Mini into TDM. Boot the iMac normally. The Mini's startup volume should appear on the iMac's Desktop. You can then treat it as any other disk drive. You can use Disk Utility to erase the Mini's drive. If you boot the iMac from an installer DVD then the Mini's drive should become available in the installer as an available target for the installation.
See:
Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

Mac Mini Server running os X lion general help

hi
just wondered if anyone else was struggling to work out how to set up an os x mac mini server with lion server on it - with no obvious help system, manual etc. Can someone point me at any resources that might help as to be honest I am struggling with this. Many features on how you administer this have changed from the previous version (snow leopard) - and all the books are no use as they all refer to this.

well to be honest I wanted a server to run more aspects of what I do privately (rather tahn at work) rather than use hosted accounts from disparate hosted providers on line. In partcular wanted a mail server to handle multiple mail domains, wiki server, web sever as per mail server and I was interested in what they would provide for iphone ipad etc as I have a few that I wanted to link to a server rather than individual macs and pcs
I also thought that Apple might bring their abilities to creating a great UI for essentially linux operating systems to a server os.
from initial views though it might have been easier (cheaper) to go to ubuntu and just their server version of linux. Anyway I will persist - I will read through the stuff you guys have linked me to - colinsolutions appears to have aimed me at some useful stuff. Looks like a bigger "project" than i imagined - but I havent looked at UNIX since 1986 so if I have to get into the command line it wont kill me I am sure.
thanks for the input - if anyone else can suggets good resources that would be appreciated.
ps simon - i found that the name for the server with the .local extension is visibile from the mac via finder and allows me to connect to the shared folder. so my server is sdhome - the shared resource is sdhome.local ... not sure if this helps but...

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

Hi Craig,
I do think that is your best bet/option...
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

How do I get the camera on my Dell Monitor to work with my Mac Mini?

ow do I get the camera on my Dell Monitor to work with my Mac Mini?

If the camera registers itself as a standard UVC compliant Cameras (UVC = USB Video Class) then the Mac will recognise and use it with nothing else needed as the Mac has a built-in UVC driver. If it does not act as a UVC type device then you could look at the following third-party drivers.
http://webcam-osx.sourceforge.net/
http://www.ioxperts.com/dcam.html
I have seen some reports suggesting that at least some Dell monitor models will act as UVC compatible webcams and should 'just work'.

How to monitor a RAID-1 in Mac mini Server 10.6.8

Similar Messages

Maybe you are looking for