How to monitor and manage apps_undots1?

Hi
Our Production ERP single node instance (Apps: 12.0.6,DB: 10.2.0.3 & OS: AIX 5.3.7) is running since 4 (almost) years. The database was behaving perfectly. Since last week i am observing that 'apps_undots1' is growing rapidly. It has 2 datafiles of size 7Gb each. Day before yesterday, i have added one datafile of 7GB but today it shows as full. What causing the apps_undots1 to grow so rapidly? What precaution to be taken?
Please shed some light?
Regards
Arizuddin

Hi Ariz,
arizuddin wrote:
Hi
Our Production ERP single node instance (Apps: 12.0.6,DB: 10.2.0.3 & OS: AIX 5.3.7) is running since 4 (almost) years. The database was behaving perfectly. Since last week i am observing that 'apps_undots1' is growing rapidly. It has 2 datafiles of size 7Gb each. Day before yesterday, i have added one datafile of 7GB but today it shows as full. What causing the apps_undots1 to grow so rapidly? What precaution to be taken?AFAIK since 10gR2 onwards, undo tablespace will always be full what ever size it may be .
MOS Doc 413732.1 - Full UNDO Tablespace In 10gR2
this is normal behavior.
Correct me if Im wrong
Do you see any error in the alert log file ?
AppsmAsti
Sharing is Caring

Similar Messages

VoIP Monitoring and Management Tools

Does anyone have suggestion on VoIP monitoring and management tools for large enterprise voip infrastructure?
We are in the final phase of 8000 phone cut-over across 2 location (2clusters) and need some advice on choosing the right monitoring system.
I saw Qovia have Cisco approved monitoring tools.
Does anyone ever use this? any suggestions or advice?
Thanks in advance
Bonaldi Kresnanto

Bonaldi,
Monitoring voice quality is just one aspect of ongoing operations. It is equally (if not more) important to have the ability to remotely troubleshoot end-user problems, manage configuration changes, and perform active testing on a regular basis before users are impacted.
In addition, whenever you make changes to your IPT system (e.g. CallManager upgrades/patches, IOS upgrades, power outages) you'll definitely want the ability to verify the system is still operating as design. Using the active tests you can do this easily and in an automated fashion.
ClarusIPC Operations is the only product that addresses these needs. It is also just as valuable during the deployment as ongoing operations to help you make changes and deploy new phones with the same product you day-to-day.
I'd like to talk to you more about the product and how it can be used in your environment.
David Roberts
[email protected]

Develop application for java Monitoring and Management

hi
i would like to develop an application that enables me to monitor and manage Java applications and instead of using jconsole ormc4j
please can you tell mz how to start

The various general JMX clients such JConsole, [MC4J|http://mc4j.org/confluence/display/mc4j/Home] (the tool referenced with "or mc4j" above), VisualVM, and jManage all use the same approach for remote JMX management that you can use ([JSR 160|http://jcp.org/en/jsr/detail?id=160]).
Some useful resources include the [Java Tutorial on JMX Remote Management|http://java.sun.com/docs/books/tutorial/jmx/remote/index.html], [Remote JMX: Connectors and Adapters|http://marxsoftware.blogspot.com/2008/08/remote-jmx-connectors-and-adapters.html], and [Remote JMX: With and Without Spring and Proxies|http://marxsoftware.blogspot.com/2008/06/remote-jmx-with-and-without-spring-and.html] (focus on non-Spring clients with and without proxies).

How to monitor and handle SM35 ?

Hi,
Please tell me how to monitor and error handling at SM35.
how we can use this SM35 exactly?
Regards,
Gayathry.

here is the detailed explanation of batch jobs:
SM35
Abhi

How to view and manage hidden files in folders.

Hi all, my question is: How to view and manage hidden files in folders?. I see hidden files in other computer but no in my Mac.
Some of you can help me?
Thanks..

Most hidden files are hidden for a reason. Tampering with them can seriously affect the stability of the system.
The software Tinkertool can
http://www.bresink.com/osx/TinkerTool.html
Can manage the invisibility, which I would only do after backing up your system.

How to create and manage the log file

Hi,
I want to trace and debug the program process.
I write the code for creating log file and debugging the process.
But i am not able get the result.
please help me how to create and manage the log file.
Here i post sample program
package Src;
import java.io.*;
import org.apache.log4j.*;
import java.util.logging.FileHandler;
public class Mylog
     private static final Logger log = Logger.getLogger("Mylog.class");
     public static void main(String[] args) throws Exception {
     try {
       // Create an appending file handler
        boolean append = true;
        FileHandler handler = new FileHandler("debug.log", append);
        // Add to the desired logger
        Logger logger = Logger.getLogger("com.mycompany");
        System.out.println("after creating log file");
          catch (IOException e)
               System.out.println("Sys Err");
        }Please give the your valuable suggesstion... !
Thanks
MerlinRoshina

Just i need to write a single line in log file.

Color Management - How get monitor and printer to match?

We have not been able to get what we see on our monitor and what we get out of our printer to reasonably match - the prints are always significantly darker than the monitor. It makes working on Photoshop Elements (both 5 and Trial 7) virtually worthless, as we can't rely on getting out what we see after making adjustments to our photos. We bought a Colormunki to calibrate the monitor and create paper profiles, but that didn't solve the problem. We have worked with the Colormunki people for weeks and haven't made any progress. We are sure that we are using the correct settings in both Elements and the Printer to have Elements control color and apply the ICC profile. We have an Epson Stylus Photo R2400 printer and a Samsung SyncMaster 2253BW monitor. We think, at this point, that the monitor maybe the problem. Apparently it is known for its excessive brightness - as even with the calibration set for very low brightness, the problem remains. Anyway, our question is whether anyone can think of a solution or, if not, can recommend a monitor more likely to give us a reliable match to the printer - what photographers/photoshop users use?? alternatively, any ideas where we can contact people who might be able to help???? Thanks in advance for your help.

I'm having the same problem with a Syncmaster 226CW Elements 7 and a Spyder3. I've cal'd the monitor to 6500 K and 90 cd/SQM but the prints are still very dark on my Canon MP520. I've also tried letting Elements manage the color and selected one of the Canon profiles -- again no luck. Several emails to Canon just gave me advice to clean nozzles and ck patterns -- no help from Canon so far. Pondering what to try next....

How to handle and manage a multi Database access in runtime with LCDS?

Hello there
I got several customer working with the same application and I wonder how, with LCDS, to manage in a runtime a multi dataBase access; without creating a configuration "mxl" file in
the folder catalina for each database.
Indeed, each customer have their own dataBase, and so far, I did not find out how to avoid creating a config xml file in catalina for every single database; which force me to create as well for each customer a folder application, since the name of the config file in catalina require a folder application to be ran under tomcat....
Thus, my question is :
Is there anyway to create only one configuration mxl file in catalina (in the server side) and then from the client side (application) let the user select its environment (meaning its database) to run the application.... this technic can be also used for multi database environment such as : Dev / Test / Prod environment (or database) where the same application can access to.
Please if any one have an idea or already delt with; just let me know, because I'm entering in a bootle neck and the situation is getting serioulsy critical....
Regards

Hello Ulrich,
with compact and repair I mean the MSAccess function "Compact and Repair".
Please follow the link below for more details:
http://office.microsoft.com/en-us/access-help/compact-and-repair-an-access-file-HP005187449.aspx
Normally you can execute this function directly in Access or with the Windows ODBC Data Sources Administrator => "Control Panel" => "Administrative Tools" => "Data Sources (ODBC)"...
I want to execute this function via cvi code and not by hand ;-).
Thank you for your support.
Frank

How to handle and Manage Multi DataBase access with LCDS in runtime ?

Hello there
I got several customer working with the same application and I wonder how, with LCDS, to manage in a runtime a multi dataBase access; without creating a configuration "mxl" file in
the folder catalina for each database.
Indeed, each customer have their own dataBase, and so far, I did not find out how to avoid creating a config xml file in catalina for every single database; which force me to create as well for each customer a folder application, since the name of the config file in catalina require a folder application to be ran under tomcat....
Thus, my question is :
Is there anyway to create only one configuration mxl file in catalina (in the server side) and then from the client side (application) let the user select its environment (meaning its database) to run the application.... this technic can be also used for multi database environment such as : Dev / Test / Prod environment (or database) where the same application can access to.
Please if any one have an idea or already delt with; just let me know, because I'm entering in a bootle neck and the situation is getting serioulsy critical....
Regards

Hello Ulrich,
with compact and repair I mean the MSAccess function "Compact and Repair".
Please follow the link below for more details:
http://office.microsoft.com/en-us/access-help/compact-and-repair-an-access-file-HP005187449.aspx
Normally you can execute this function directly in Access or with the Windows ODBC Data Sources Administrator => "Control Panel" => "Administrative Tools" => "Data Sources (ODBC)"...
I want to execute this function via cvi code and not by hand ;-).
Thank you for your support.
Frank

How to control and manage several microsoft accounts and have control

Windows 8 has brought many unique challenges, and very few IT people seem to be able to answer questions like this.
I am a mechanical engineer for a small company who wishes to install Windows server2012 on a new server with new laptops for each user, and some users are intended to have windows tablets in addition to having laptops.
We have written policy in place with regard to using office equipment only for business use, not personal, and that all information is confidential, and only free applications may be downloaded or else they will be paid for by the company for all
who require to use them, so there are no issues with regard to who owns what.
Please reply to the question below in simple language, I understand computers and software and how they work, but I am not an IT guy, and our company cannot afford to employ a permanent IT person, so I need to be able to ensure that certain controls
are in place and effected properly by the IT contractor we employ.
The company must at all times have control over and access to all data on laptops and the server, as it is all intellectual property of the company. How do we create Microsoft accounts that allow us to remain in control despite employees using their
mail address and personal pin numbers as an alias to operate ?

Hi,
As I know, SCOM (system Center Operations Manager) can do some monitor jobs which is close to your goal. It is a cross-platform data center management system for operating systems and hypervisors. It uses a single interface that shows state,
health and performance information of computer systems. It also provides alerts generated according to some availability, performance, configuration or security situation being identified.
Operations Guide for System Center 2012 - Operations Manager
http://technet.microsoft.com/en-us/library/hh212887.aspx
If you want more information about this product, you can open a further discussion in the forum below
System Center Operation Manager Forum
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Yolanda Zhu
TechNet Community Support

Tree from XML (JMX monitoring and management application)

I am trying to create a tree structure from XML. I am setting
the below XML as the dataProvider for the tree.
Now I only want to see the "element" labels in the tree
structure. But I also see the operationList and the operations
under it too. Is there any way I can filter these out from the tree
structure ?
The reason why I have the operations is that I have to
display them on the right hand side, i.e whenever someone clicks on
an element the operations corresponding to that have to be
displayed on the right hand side.
If you see the "flex-admin" application under the livecycle
data services ... my applications is exactly similar to that.
If anyone needs more information, I would be happy to
provide.
<?xml version="1.0" encoding="UTF-8"?>
<centralmbeanserver>
<element label = "FMC-DropCopies-QA" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA" >
<element label = "Cache Manager" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache Manager"
>
<element label = "SACFixFilterRulesCache" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache Manager,DB
Cache=SACFixFilterRulesCache" >
<operationList>
<operation name = "reloadDBCache" returnType =
"java.lang.String">
</operation>
</operationList>
</element>
<element label = "SACFIXExecBrokerMapCache" canonicalName
= "CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache
Manager,DB Cache=SACFIXExecBrokerMapCache" >
<operationList>
<operation name = "reloadDBCache" returnType =
"java.lang.String">
</operation>
</operationList>
</element>
</element>
<element label = "Source Manager" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source Manager"
>
<operationList>
<operation name = "enableAllMsgSources" returnType =
"void">
</operation>
<operation name = "disableAllMsgSources" returnType =
"void">
</operation>
<operation name = "listMsgSourceNames" returnType =
"java.util.List">
</operation>
<operation name = "reloadSources" returnType = "void">
</operation>
</operationList>
<element label = "CS-SACFIX6-SS" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source
Manager,Msg Source=CS-SACFIX6-SS" >
<operationList>
<operation name = "enableMsgSource" returnType = "class
java.lang.String">
</operation>
<operation name = "disableMsgSource" returnType = "class
java.lang.String">
</operation>
</operationList>
</element>
<element label = "CS-SACFIX1-SS" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source
Manager,Msg Source=CS-SACFIX1-SS" >
<operationList>
<operation name = "enableMsgSource" returnType = "class
java.lang.String">
</operation>
<operation name = "disableMsgSource" returnType = "class
java.lang.String">
</operation>
</operationList>
</element>
</element>
</element>
</centralmbeanserver>

How is the WebSphere node connected to the cluster? Is it using TCMP? Extend?
Local, Distributed, Replicated, Near, Overflow, External and Optimistic cache statistics appear in the Coherence JMX server. However, near and local caches created on extend nodes do not appear. Therefore the -Dtangosol.coherence.management.remote=true on an Extend client will not register the near or local caches.
Thanks,
Everett

Jconsole - J2SE Monitoring and Management Console

Where is jconsole ?
According to the documentation, the jconsole tool is come installed with J2SE 1.5
Does anyone know how to get jconsole ?

Does it slow applications down
1) when JConsole is not running/connected to the JVM but the application is still started with -Dcom.sun.management.jmxremote
2) when JConsole is connected to the JVM and traces the resources
?

Monitoring and Management

Is there any software available for Lenovo servers like Dell's OpenManage to monitor fans, power supplies, disks, and RAID controllers? I could find anything on the support site or Google and spent 45 minutes on the phone with a lot of clueless people that just kept transfering me between Lenovo and IBM.
Solved!
Go to Solution.

I have the same question...
I called support and I told the rep that we are jumping the Dell ship and require a monitoring soultion like Open Manage the guy had no clue on what to use to monitor the server.
I found LSI megaRAID app for the onboard RAID but it appears that I need to purchase the advance option for alerts... Really
Jeremy

Monitor and manage small broadband link

Hi all,
Recently my company setup a broadband link external to all enterprise network. This is a simple ISP connection they pay for separate. Business reason justify such installation.
Now they have expanded this link to a small lan. and got it wireless. Because these now accommodates more than 1 user they ask me to look after. But I have no clue how should I manage bandwidth and control who uses the resources...
The design is ISP modem connected to Linksys router connected to Cisco Switch Catalyst 2960 C Series which is connected to 4 cisco Wireless APs. The Cisco Switch also has a port connected to a Cisco 2500 Series Wireless controller.
I have been exploring the capabilities of this wireless controller but I get only general statistics about traffic... I can not see if what each IP is using from the bandwidth and for what is it using..
Because I have no servers or firewalls in the middle I am a bit loss on how to administer this...
Is there any tool that would help me?
Any one with similar experience?
Many thanks

If the switch supports netflow then you can obtain software from many vendors that will analyze the netflow data.
http://www.cisco.com/en/US/prod/iosswrel/ps6537/ps6555/ps6601/networking_solutions_products_genericcontent0900aecd805ff728.html
Sent from Cisco Technical Support iPad App

How to connect and manage multiple devices against one computer/account?

I have 2 i phones, 2 i Pads and 2 i Touches and need to maintain unique photos/music/apps on each device. How do I do this using 1 i tunes account and 1 computer?

Open itunes, connect iphone, select what you want, sync, disconnect iphone.
Connect other iphone, select what you want, sync, disconnect iphone.
Connect ipad, select what you want, sync, disconnect ipad.
Connect other ipad, select what you want, sync, disconnect ipad.
Connect ipod, select what you want, sync, disconnect ipod.
Connect other ipod, select what you want, sync, disconnect ipod.

How to monitor and manage apps_undots1?

Similar Messages

Maybe you are looking for