How to Monitor APNS Health?

What are ways to monitor the performance of the Push Notification system? Is there a way to avoid getting into code? Is there a way to script it? Any diagnostic or monitoring applications, or a tricky way to set something off when a notifcation is sent or received?
Thanks!

Okay, except for the fact that I have no idea how to do that :-) I'd imagine there would be a way to access a primitive to wait for receipt of a notification, to send a notification. Would it use the UID of the device?
If these are too newbie-like, feel free to point me to a reference. It's admittedly a pretty general question, but I'm open to all input.
Thanks!

Similar Messages

How to Monitor RAC "Health" and how to Administer

Now, we are using the RAC that we have setup... i am managing now 11.2.0.3 RAC on windows and 10.2.0.5 RAC on OEL...
Can I ask, what are the things that needs to be checked in these setup...like what are the logs that I need to check.. how do i monitor well the Clusters...
its like what are the things that I have to constantly monitor in RAC..sort of RAC "health" monitoring....
thanks!

Hi
There are lots of options...
Enterprise Manager Database Control/Enterprise Manager Grid Control
CRSCTL Utility Reference
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/crsref.htm
Database Health Reports
AWR
ADDM
ASH
Logs
AlertLogs/ClusterLogs
Cheers

How to monitor on disk i/o on healthcheck and awr report on biweekly health

can you explain how to monitor from disk i/o and awr report from old snap shot to new snap shot
how to check and analyze .,,,,,,,,,,,,,,,,,,,,,can any one tell few points which we can **regularly maintain for health check**
thanks in advance
SQL> SELECT group_number ,disk_number ,mount_status ,total_mb/1024 ,free_mb/1024
2 ,reads, (bytes_read / (1024*1024*1024)) mb_read ,read_errs ,read_time,writes
3 ,write_errs ,write_time FROM v$asm_disk;
GROUP_NUMBER DISK_NUMBER MOUNT_S TOTAL_MB/1024 FREE_MB/1024 READS
MB_READ READ_ERRS READ_TIME WRITES WRITE_ERRS WRITE_TIME
2 0 OPENED 199.989258 0 13697147
402.589765 0 44542.38 4358669 0 8883.86
2 1 OPENED 199.989258 0 13653653
405.503195 0 46014.33 4805783 0 11138.13
2 2 OPENED 199.989258 0 15272350
415.620874 0 45524.7 4571038 0 9806.01
GROUP_NUMBER DISK_NUMBER MOUNT_S TOTAL_MB/1024 FREE_MB/1024 READS
MB_READ READ_ERRS READ_TIME WRITES WRITE_ERRS WRITE_TIME
2 3 OPENED 199.989258 0 22713630
533.380945 0 48105.68 4692729 0 9994.31
2 4 OPENED 199.99707 0 23986390
547.804756 0 57601.79 5788565 0 11073.44
1 0 OPENED 199.989258 0 310810
47.4352741 0 9652.12 1877994 0 3490.5
GROUP_NUMBER DISK_NUMBER MOUNT_S TOTAL_MB/1024 FREE_MB/1024 READS
MB_READ READ_ERRS READ_TIME WRITES WRITE_ERRS WRITE_TIME
1 1 OPENED 199.99707 0 137665
44.7837362 0 9155.21 751099 0 3092.96
1 2 OPENED 199.99707 0 139561
44.7904587 0 9424.26 753116 0 2858.23
1 3 OPENED 199.99707 0 141139
44.7718539 0 9506.27 802414 0 2768.22
9 rows selected.
can you please tell me how to monitor on disk i/os which is as shown above and
please tell me AWR report to analyze some basic points for health check
please give some details for health check of database.
thanks in advance

Hi;
What is DB version?
Please check below doc:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28275/tdppt_degrade.htm#CACGCJDC
Also see:
What is AWR( Automatic workload repository ) and How to generate the AWR report? [ID 748642.1]
How To Understand AWR Report / Statspack Report [ID 842884.1]
Regard
Helios

How do i monitor the health of my Raid array?

First, I want to thank Harm, Bill, and all the countless others who continue to give great advice on this forum. My question is how to I monitor the health of my raid array and how to determine which disk is acting up. I am using a 3-disk soft raid 0 off my motherboard (gigabyte ud3p). Seems to work pretty well but occasionally has a hiccup in certain programs. I wonder if it is a sign of an impending problem or if it is just because it is a soft raid. I've tried several HD diagnostics (Crystal Disk Info, Active@, HD Tune, etc.) but aside from temperature, they don't give any info about the impending death of my raid 0. I have the SMART feature turned on in bios.
To premtively address the critics about the raid 0. I only do about one video a week and do a backup every night. So i figured it (and when) it crashes, i'll just lose a days work. The motherboard is suppose to do a raid 5 but it performed really poorly. My system is configured with additional drives (SSD boot, Raid 0 scratch, and final video) as recommended. Any advice would be appreciated.
michael

The problem with almost all raid controllers is that they do not support SMART. So that is out. With software raids you are even more limited.
With hardware raid controllers you have web based interfaces that show some basic information, like this:
but software raids do not. There are two ways to determine possible problems, at least that I know of:
1. Use drive cages with LED's for the individual drives to show activity and inspect them visually.
2. Use old-fashioned manual labour to feel vibrations, temperatures and hear clicks on individual drives.
With only 3 drives in the raid, the chances of guessing correctly are 33.3% to start with and they only increase with manual inspection. A far easier job than in the case of 6 or more disks.
Sorry I can not offer better suggestions.

Best practice on monitoring Endeca health / defining outage

(This is a double post from the Endeca Experience Management forum)
I am looking for best practice on how to define Endeca service outage and monitor the health of the system. I understand this depends on your user requirements and it may vary from customer to customer. Specifically what criteria do you use to notify your engineer there is a problem? We have our load balancers pinging dgraphs on an interval. However the ping operation is not sufficient in our use case. We are also experimenting running a "low cost" query to the dgraphs on an interval and using some query latency thresholds to determine outage. I want to hear from people on the field running large commercial web site about your best practice of monitoring/notifying health of the system.
Thanks.

The performance metric should help to analyse the query and metrics for fine tuning.
Here are few best practices:
1. Reduce the number of components per page
2. Avoid complex LQL queries
3. Keep the LQL threshold small
4. Display the minimum number of columns needed

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

How to monitor Ironport 370 using SCOM

Can someone please let me know how to monitor Ironport using SNMP service?
I have gone through https://supportforums.cisco.com/discussion/11782501/ironport-monitoring but couldnt understand how to configure

Please find the following KB articles to assist you in external monitoring:
Does AsyncOS support SNMP monitoring?
ESA, SMA, and WSA Queries with the snmpwalk Command Configuration Example
How do you test the SNMP trap capability without simulating actual outages or service-impacting events?
For full information regarding XML/SNMP monitoring:
XML, as you have requested more on, is used to monitor the statistics of email processed through the appliance.
For full documentation regarding XML – please see the Daily Management Guide (page 315).
SNMP can be used to monitory overall system health, including the hardware.
For full documentation regarding SNMP monitoring – please see the Daily Management Guide (page 306).
The Daily Management guide can be located at the following link, as is recommended to be downloaded from there due to the size:
http://www.cisco.com/en/US/products/ps10154/products_user_guide_list.html

How to monitor a specific transaction in Solution Manager ?

Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How to monitor an application using JMX

Hi,
How can I monitor the portal application running on portal server by using MBeans (JMX)? For this I need to make a connection between my portal application and MBean class, How to monitor operations? How can I do that? If anybody has come across the same requirement pls explain me with the implementation details.

Hello,
I have done that in a project (not Portal, but pure Java Application, should be no difference), working fine.
The steps are as follows:
- create MBean Server (e.g. MBeanServerFactory.createMBeanServer("test");)
- create your MBeans
- make them accessible to clients (register the MBeans in the server)
- query them from clients
see http://java.sun.com/developer/technicalArticles/J2SE/jmx.html
for very good explanation including sample source code.
CSY

How to monitor OSD TS failure and get alert or report?

How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTech

Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon

How to monitor disk space in BW

can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?

When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA     ARFC Call Data (Callers)
BALDAT          Application Log: Log data
BSRWBSTORE     Storage for binary large objects (Excel)

How many monitors can you use on a new imac with GEForce 780m?

My husband bought a new 27" iMac with the optional GEForce 780m with 4 gig of video ram. He wants to know how many monitors he can run simultaneously, and at what resolutions. He would obviously be using the Thunderbolt ports to do this. I thought this information should be easily found in the technical specs for either the iMac or the video card itself on the NVidia site, but it is not.

Catherine Gramze wrote:
Ok, rkaufman. Can he use two 4k monitors in addition to his iMac display? He wants to know what his options are in terms of number of monitors and the resolution. Yes, I know which monitor you buy will be the limiting factor for the actual display, but he has not yet purchased these additional monitors. If thunderbolt allows him to run 3840x2160, how many of them can he run at once at 32 bpp? How many if he chooses 2560x1600 instead?
To be honest I don't know how many Thunderbolt displays he can run, I would STRONGLY recommend contacting Apple to ask. You can ask the online store (phone number is in upper right of it's home page) or if you have an Apple Store in your area, making an appointment with a business specialist and asking that question.

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

How to monitor oracle 11g database sessions on Windows 2008 server?

Hi Experts
How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence. i never tested it but seems impresive. It is free and i think it would be use ful to you.
http://myorasql.com/
You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

How to monitor partial payment

Dear All:
In my case, I always pay more money for original AR because I forgot partial payment had been done before. How I monitor AR overpayment when past partial payment exist?
Thanks for the help suggestion first. Sorry for error description above.
1.first for specific overdue analysis policy of company, we use partial payment.
2.And then the question comes. According to contract item, we send invoice to customer only once and receive payment in several step. Each time income received, we use partial payment to clear the AR (to relate payment with original AR). But one customer may have some contracts with us, it always pay for all contract in certain amount at one time. We shall manually divide amount for each contract. If user forgot one contract was paid partially before, he may clear the AR totally at sencond time and then the first payment will still outstanding in open item. Finally we can find many partial payments received but can't refered to any invoice.
So we are finding a way to control AR clearing to check whether partial payment exist and if the total amount is over original invoice it couldn't be cleared.
Thanks to give me some suggestion.
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi

Hi...
You always have the otion of displaying vendor/customer balances(FK10N/FD10N) to find out the balances and the vendor/customer line items(FBL1n/FBL5N)
When you pay your vendors select residual payment so that the system will select the residual item remaining to be paid to avoid any confusion.
Its a good business procedure that you should not be paying your vendors more unnecessarily.
Regards
Aravind
Assign points if useful

How to Monitor APNS Health?

Similar Messages

Maybe you are looking for