How to monitor gbic SFPs metrics using SNMP?

i have
Vendor Name           :   CISCO-FINISAR
Vendor Part Number    :   FTRJ1319P1BTL-C
Vendor Revision       :   0x42 0x20 0x20 0x20
and when i try to get info from telnet i get normal information
#sho interfaces transceiver
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
                                           Optical   Optical
           Temperature Voltage Current   Tx Power Rx Power
Port       (Celsius)    (Volts) (mA)      (dBm)     (dBm)
Gi0/26       52.5       3.25      26.9      -5.7     -13.8
but i couldnot get from snmp can someone tell me if is some configure in device or oid .

Similar Messages

How to monitor self signed certificates using scom 2007 R2

How to monitor self signed certificates using scom 2007 R2. i need to monitor specifically self signed certificates expiration. if possible in two state monitor...please suggest me the best way..
B John

Hi,
Based on my understanding, that you want to create a monitor to monitor certificate expiration, with two state, when the certificate is about expiration for 21 days,, send warning, when the certificate is about expiration for 10 days, then send
alert. I think we need to create scripts to do so, hope the below links can be helpful:
Monitoring Certificates In SCOM
http://blogs.technet.com/b/omx/archive/2013/01/30/monitoring-certificates-in-scom.aspx
Monitoring Expiring Certificates using SCOM
http://blogs.technet.com/b/sgopi/archive/2012/05/18/monitoring-expiring-certificates-using-scom.aspx
Regards,
Yan Li
Regards, Yan Li

How to monitor Data downloaded, bandwidth used, Url hit in Client machine through SCOM

Hi,
Is there is any way which can monitor Data downloaded, bandwidth used, Url hit in Client machine(windows 7 and Windows 8.1) through SCOM.

adawson wrote:
Hi,
I installed and running ebusiness suite 12.1.1 in Oracle Linux server 6.3, below is the url I used to run ebs in the Linux Server,
http://aserver.localdomain:8000/OA_HTML/AppsLogin
Can you access this URL on the server itself? Do you see the login page on the server?
I need to access the ebs from my laptop which is having windows 7 operating system.
My laptop (with IP Address 10.0.0.4) is connected to network and I can ping with my linux server's IP Address- 10.0.0.2 (ping 10.0.0.2 works)
but when I ping from my laptop with the server 's hostname ( ping aserver.localdomain) it says "ping request could not find host aserver.localdomain" .What if you access http://10.0.0.2/OA_HTML/AppsLogin from the client, can you see the main login page then?
when I tried to access the url "http://aserver.localdomain:8000/OA_HTML/AppsLogin" from the laptop ebs page is not opening.
Please post the contents of the hosts file on the server and the client.
Is there any configuration to be made in Linux server where ebs is installed or tell me what things to be done to access ebs from another system.Just make sure the firewall is disabled on the Linux server.
I also have static ip configured in my router, So tell me what settings to be made to access this same ebs through internet.You do not need an internet access here since your server and client on the same network.
Thanks,
Hussein

Does anyone know how to monitor a microphone when using Voice Over tool?

I use Final Cut studio in conjunction with an AJA Kona LHe card. Audio inputs are via the AJA. I monitor the output from FCP through the AJA card via a Samson C-Control (monitor matrix). Here's my problem. When I'm recording voice over, I am unable to monitor the sound from the microphone through the headphones (or speakers). There is definitely an audio feed being routed to the headphones as I am able to hear the audio cue countdown. The microphone is working fine too - when it comes to playing back the voice over through the headphones (or speakers), I can hear the track absolutely fine. Has anyone experienced the same problem... and do you know how to solve it? Many thanks, AW

its not that you've anything screwy going on .. this is the way it is engineered to work.
the pre-existing audio (and cues) is routed to the headphones but not the voice being recorded.
the solution is to use an audio mixer to monitor both the voice over and the timeline

How to monitor bandwidth on Catalyst via SNMP?

I've got c3750g with 12.2(55)SE.
When I try ifSpeed (1.3.6.1.2.1.2.2.1.5), i've got 1 peak 999999999 and then only 0. Polling is 1 second.
When I try ifHighSpeed (1.3.6.1.2.1.31.1.1.1.15), I've 0 also.
When I try ifInOctets from snmp-v2 MIB (1.3.6.1.2.1.2.2.1.10), I've got results, but since it summary - my software cannot do calculations and I cant get instant interface bandwidth.
Is there any solutions for catalyst?

Hi,
Are you saying ifSpeed. is changing value from one poll to the next? What kind of interface is it? Sounds like a bug, or an error in polling. Please post the snmpwalk of ifDescr, ifType, and ifSpeed.
For the ifHighSpeed issue, from the IF-MIB entry about that object: "For a sub-layer which has no concept of bandwidth, this object should be zero." Are you polling ifHighSpeed on a sub-layer interface?
Bandwidth utilization is always calculated by taking multiple readings of in or out counters. There will not be a separate counter kept in our snmp agent, when separate values already exist and can be calculated. Thus, since you can use ifSpeed and poll ifInOctets to get the delta, and then calculate the result, our snmp agent will not contain the utilization number.
If you want a graph of bandwidth utilization over time, I would suggest obtaining MRTG. It is available free of charge over the web, just search for MRTG download.
Hope that helps,
Curtis

How to monitor Message Bridge runtime using WLST

Hi Readers,
I would like to monitor Message Bridge runtime on weblogic 8.1 using WLST script.
Can anybody tell if there is any possibility? Is there a MBEAN avaialble for Messaging Bridge.?
Edited by: user13254842 on 09-Sep-2010 23:17

Hi,
I don't recall whether the console provides a way to monitor the bridge, or whether the MessagingBridgeRuntimeMBean hangs off of some parent mbean, but you can obtain arbitrary mbeans using standard JMX query calls.
Some scratch code that I have:
private static MBeanServerConnection getConnection(
    String urlStr,
    String username,
    String password,
    String mbeanServer
) throws Exception {
    // This code implicitly requires weblogic classes to be in the classpath
    // in order to run efficiently, but its possible to get it to work without
    // any WL at all.   See
    //   http://e-docs.bea.com/wls/docs90/jmx/accessWLS.html#1118690
    // The code could be changed to automatically detect if WL is in
    // the classpath, and switch to "iiop" mode if it isn't.
    URI url = new URI(urlStr);
    Hashtable h = new Hashtable();
    h.put(Context.SECURITY_PRINCIPAL, username);
    h.put(Context.SECURITY_CREDENTIALS, password);
    h.put(
      JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,
      JMX_PROTOCOL_PROVIDER
    JMXServiceURL serviceURL = new JMXServiceURL(
       url.getScheme(), url.getHost(), url.getPort(), JMX_JNDI_ROOT + mbeanServe
    JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);
    return connector.getMBeanServerConnection();
conn = getConnection(url, user, pass, "weblogic.management.mbeanservers.domainruntime")
String type = "JMSServerRuntime";    // not sure may need to add "MBean" or strip off "Runtime", bridge = "MessagingBridgeRuntime"
Set xxx =    conn.queryMBeans(new ObjectName("*:Type=" + type + ",*"), null);Hope this helps,
Tom
Edited by: TomB on Jun 10, 2009 2:57 PM

How to monitor perticuler sql statement using the INDEX or not?

I am running on a long running quary, and the output is comming very late. So i want to know the sql quary is using the index or not? How to know that?

If you want to check the real execution plan of a running query without waiting for query completion, you can try following steps that you should adapt to your query and your environment:
1. start the query
select
count(*)
from all_objects, all_objects;2. Retrieve in another session the SQL_ID and the CHILD_NUMBER of the running query:
select sql_id, child_number, sql_text
from v$sql
where sql_text like '%all_objects%';3. use DBMS_XPLAN.DISPLAY_CURSOR to get the real execution plan from shared pool using SQL_ID and CHILD_NUMBER from step 2:
select * from table(dbms_xplan.display_cursor(<sql_id>,<child_number>));Actually you don't need to restart the query if it is already running because the hint GATHER_PLAN_STATISTICS is only needed if you want to have current execution statistics.
Edited by: P. Forstmann on 2 mars 2011 10:23

How to reboot Nexi using SNMP (tsMsgSend not supported)

How does one reboot Nexus using SNMP?'
Normally, I reboot IOS gear using:
snmpset -c {private} {switch|router|whatever} tsMsgSend.0 i 2
               tsMsgSend OBJECT-TYPE
                   SYNTAX INTEGER {
                        nothing(1),
                        reload(2),
                        messagedone(3),
                        abort(4)
                   ACCESS read-write
                   STATUS mandatory
                   DESCRIPTION
                           "Sends the message. The value determines what
                           to do after the message has completed."
                   ::= { lts 9 }
But our new Nexi (5000 and 7500) don't support tsMsgSend in various ways:
N5K
Reason: notWritable (That object does not support modification)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
N7K
Reason: wrongValue (The set value is illegal or unsupported in some way)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
Yes, I have the following in the Nexi config files:
snmp-server system-shutdown
How does one reboot a Nexus using SNMP?
--sk
Stuart Kendrick
FHCRC

Hi,
The only way that a device can be reloaded using SNMP is with the SNMP object tsMsgSend
(1.3.6.1.4.1.9.2.9.9).
As per the official Nexus MIB support list, the OID is not supported in NX-OS
Thanks-
Afroz
[Do rate the useful posts]

How to monitor MySQL Server installed in Windows Server using Nagios

You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community

How to use SNMP Agent

Hi All,
Can anybody tell me how to use SNMP Agent to monitor the Access and Identity Servers

Hi Ramesh,
I cannot comment on WebLogic & SNMP - this kind of questions would
probably need to be asked on a WebLogic forum.
If you're looking for an SNMP Manager API though, you may want to have a
look at the Java Dynamic Management Kit (commercial product,
free evaluation):
http://java.sun.com/products/jdmk/index.jsp
Hope this helps,
-- daniel
JMX, SNMP, Java, etc...
http://blogs.sun.com/jmxetc
null

How to monitor Ironport 370 using SCOM

Can someone please let me know how to monitor Ironport using SNMP service?
I have gone through https://supportforums.cisco.com/discussion/11782501/ironport-monitoring but couldnt understand how to configure

Please find the following KB articles to assist you in external monitoring:
Does AsyncOS support SNMP monitoring?
ESA, SMA, and WSA Queries with the snmpwalk Command Configuration Example
How do you test the SNMP trap capability without simulating actual outages or service-impacting events?
For full information regarding XML/SNMP monitoring:
XML, as you have requested more on, is used to monitor the statistics of email processed through the appliance.
For full documentation regarding XML – please see the Daily Management Guide (page 315).
SNMP can be used to monitory overall system health, including the hardware.
For full documentation regarding SNMP monitoring – please see the Daily Management Guide (page 306).
The Daily Management guide can be located at the following link, as is recommended to be downloaded from there due to the size:
http://www.cisco.com/en/US/products/ps10154/products_user_guide_list.html

Use SNMP to monitor the power supply status of stacked switches

Does anybody know how to use SNMP to monitor the status of the internal power supplies of a group of stacked Cisco 3750 switches?
The switch stack has three 3750-48PS-E switches inter-connected by Cisco StackWise cable. IOS ver 12.1(19)EAlc. A single IP address is used to identify the switch stack. Every time I poll the OID chassisPs1Status (1.3.6.1.4.1.9.5.1.2.4.0 in CISCO-STACK-MIB), I only got the status for the Master switch of the switch stack. Is there any way to poll the power supply status of other switches in the switch stack?
Thanks a lot!

Sorry to refresh such an old topic - but I am stuck with exactly this: Monitoring power supplies of a stacked Cisco Catalyst 3750-E.
I'm using the exact same OID's as described, but the problem is, the information shown on the SNMP output is not correct.
This morning, a power supply of the first switch failed and switched to RPS. Here the information I got on SNMP:
snmpwalk -v 2c -c public 192.168.1.50 1.3.6.1.4.1.9.9.13.1
SNMPv2-SMI::enterprises.9.9.13.1.1.0 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1006 = STRING: "SW#1, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.2006 = STRING: "SW#2, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1006 = Gauge32: 41
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.2006 = Gauge32: 40
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.1006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.2006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.1006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.2006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.2006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.1060 = STRING: "Switch#1, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.2059 = STRING: "Switch#2, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.1060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.2059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1059 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2060 = INTEGER: 2
As you see, both PS1 (for both switches) are appearing normal. It doesn't even recognize RPS:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
The first switch's power supply died and now the cable is disconnected. LED's of the power supply are out. And still: The switch happily announces by SNMP it's power supplies are up.
Is this a known bug? If yes, has it been fixed?
Model WS-C3750E-48TD
Firmware 12.2(37)SE1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

Monitor BGP sessions on VRFs with XR 4.2 using SNMP

Hello,
I have an ASR 9006 running IOS XR 4.2 and I want to monitor some BGP sessions under VRFs using SNMP. However, when I poll the device using the OID 1.3.6.1.2.1.15.3.1.2 I only get the BGP sessions on the global VRF. I have read that I have to create 'SNMP contexts' in order to poll information about VRFs but I am not sure how to create them on XR 4.2. Do you know how to do it?
Thanks in advance.
David

Hello,
thanks to the collaboration of the engineers of Dimension Data I have managed to get it working. In case you are interested in the solution. This would be the configuration on the ASR:
; We create the snmp context
snmp-server context test-ctxt
; We associate the context with the VRF
snmp-server vrf vrfTest
context test-ctxt
; We create the community
snmp-server community test-com RO 1500
; We map the community with the context
snmp-server community-map test-com context test-ctxt
Now, when we poll the community associated with the context the peering sessions for that context are returned:
$ snmpwalk -v2c -c test-com 192.168.0.1 1.3.6.1.4.1.9.9.187.1.2.5.1.3
SNMPv2-SMI::enterprises.9.9.187.1.2.5.1.3.1.4.10.10.0.1 = INTEGER: 1
On the ASR:
#show bgp vrf vrfTest sum | b Neigh
Wed Jun 5 08:05:26.286 UTC
Neighbor Spk AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down St/PfxRcd
10.10.0.1 1 65001 0 0 0 0 0 00:00:00 Idle
Regards

CSM-S, how to monitor by snmp.

I'm using a CSM-S module on my 6513 chassis. How can I monitor it with NNM via snmp?
Thanks.
Andrea.

Hi,
See the following. They all can be entered into the global mode.
snmp trap-type enterprise
snmp auth-traps
snmp trap-type generic
snmp trap-type enterprise dos-illegal-attack trap-threshold 1000
snmp trap-type enterprise dos-land-attack trap-threshold 1000
snmp trap-type enterprise dos-smurf-attack trap-threshold 1000
snmp trap-type enterprise chmgr-module-transition
snmp trap-type enterprise chmgr-ps-transition
snmp trap-type enterprise isc-lifetick-failure
snmp trap-type enterprise login-failure
snmp trap-type enterprise reload
snmp trap-type enterprise redundancy-transition
snmp community #@$@# read-only
snmp community #@$@# read-write
snmp trap-host XX.XX.XX.XX #$#$%#%
snmp contact "ABC Company"
snmp name "CSS-$#%$#%"
snmp trap-type enterprise service-transition
snmp location "Sydney L32 MK22"
snmp trap-source specified XX.XX.XX.XX
snmp trap-type enterprise dos-syn-attack trap-threshold 500
thanks

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

How to monitor gbic SFPs metrics using SNMP?

Similar Messages

Maybe you are looking for