How to monitor Hyperion services
Hi Experts,
Some of the services stop working/not responding randomly which we come to know when user inform us.
We find this is due to Hyperion services (like workspace and Planning) stop working.
Is there any workaround (or better way to monitor) so that user continue access all features without any trouble?
Normally we restart Hyperion services and everything again working normally.
Regards
Kumar
Hi,
Try this link below. It describes how to get alerted when a service stops.
http://www.eggheadcafe.com/software/aspnet/31303233/you-will-need-to-create-a-bat-file-to-do-the-emailing-and-in-the-properties.aspx
Cheers,
Alp
Similar Messages
-
How to monitor RAC services and nodeapps in Grid Control
Hi,
I have created a number of RAC service names such as GL on a 2-node RAC and would like to use Grid control 10.2.0.2 to monitor the availability of those services and nodeapps. I was not able to find anything in Grid Control that would allow me to configure that. What are being monitored now are the listeners, database instances and nodes. Would it be possible to monitor more than just the RAC listeners, instances and nodes?
thanks.I don´t think that there is an out-of-the-box metric. However, CRS monitors your services and Grid Control monitors CRS errors. If you need more granular monitoring, I have 2 suggestions:
1) user callouts:
[http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/hafeats.htm#RACAD7133]
2) extending oracle enterprise manager
I have written a paper on how to extend oem at [http://www.ora-solutions.net/web/papers/]
"Extending Oracle Enterprise Manager to collect HP-UX glance data"
You can follow the instructions to build a new target type called "RAC_SERVICE" and add your serivces as targets, e.g. S_BATCH, S_ONLINE, S_HR.
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 2, 2009 10:57 AM
Edited by: mdecker on Jan 2, 2009 10:59 AM -
How to monitor Radius services on ACS 5.4
Hi All,
I want to monitor Radius services of ACS 5.4, In case of failure any radius service on ACS.
ACS should send alert to Syslogs or email notification
Is there any way to monitor Radius services ? Anyone have any idea how to monitor.
Regards.Hi Narinder,
I dont think so there is any particular way you can do that, Because ACS 5.x doesnt have any particluar Radius service.
The services which are available and can be viewed through CLI and GUI are following:
Database
Management (ACS management subsystem)
Ntpd
Runtime (ACS runtime subsystem)
View-alertmanager
View-collector
View-database
View-jobmanager
View-logprocessor
htt https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-ususer/guide/acsuserguide/viewer_sys_ops.html#pgfId-1052845
Cheers
Minakshi -
How to monitor radius service in ACS 5?
Hi to all,
I have an ACS version 5 and the radius authentication is not working, i did a port scan to the ACS and I can't see the radius port open.
I tried to verify if the radius service is running but i can't find "where to" check that in this ACS 5 version, does anyone know where is that or what should i verify to see what the problem could be??
I also checked in the monitoring section but there is nothing matching radius authentication.
Thanks in advance for your help.Hi Narinder,
I dont think so there is any particular way you can do that, Because ACS 5.x doesnt have any particluar Radius service.
The services which are available and can be viewed through CLI and GUI are following:
Database
Management (ACS management subsystem)
Ntpd
Runtime (ACS runtime subsystem)
View-alertmanager
View-collector
View-database
View-jobmanager
View-logprocessor
htt https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-ususer/guide/acsuserguide/viewer_sys_ops.html#pgfId-1052845
Cheers
Minakshi -
Alert on Hyperion services down
Hi,
Could you please advice how to monitor Hyperion services if get down due to any reason?
Will it possible to get email/alerts?
Edited by: Kumar 1 on Dec 23, 2011 1:43 AMwe are handling it using shell script ...which keeps an eye on the respected services. once that services goes down we get an email
-
Manage hyperion services with OEM
is anyone know how to config OEM to monitor Hyperion services?
I knew this a patch for OEM 10 which can maike OEM to monitor hyperion financial management serivce. I want to know how to monitor other hyperion services
thanksI have the same issue finding documentation.
I'm aiming for GC 11g and the target Hyperion is 11.1.1.3
If i find same, I'll update -
RE: How to monitor who has what service objectconnection?
We ran into this problem, specifically because we are using a dbsession
connection pattern and the dba's did not like loosing control over
connections. We have 8 subsystem, each with a dedicated connection that
is shared across multiple users. We also have a security pattern in
place that is token based. Since we have to pass a security token
through service objects we can track this information using a
"connection array" on the service object and a system agent to poll the
contents of the array. When a sql statement is invoked on a
persistence object we add the user to the array on the persistence
manager (SO). When the sql is complete we remove the user from the
array. Since the PO has a system agent we can ask the system agent at
anytime, who has an open connection/session with the PO. Since system
agents plug into econsole, the dba can go look any time.
Any questions, please contact
Chris [email protected] or
Gary [email protected]
MCI Systemhouse
From: ADRIAN PEGGY LYNN
To: [email protected]
Subject: How to monitor who has what service object connection?
Date: Tuesday, September 24, 1996 9:12AM
Here at Eli Lilly & Co., we have a customer that would like to know if
anyone out there has successfully
devised a method to be able to tell what user has what service object
connection. Basically, if a customer
calls the system administrator with a problem with the application, the
system administrator would like to
be able to kill certain processes. Right now, the database connections
running on the server all look the same.
Some ideas were generated internally, one referring to setting up agents
but we'd like to see if anyone
has had success in doing this already that we could use as a contact.
Thanks,
Peggy Adrian
Eli Lilly & Co.
[email protected]Hello Peggy,
I suggest that you make contact with Paolo Sidoli at DS Data (Italy). They
have written a very nice package called DORE that includes trouble shooting
utilities, that allow you to monitor what a remote user is doing (you can
actually see their screen!).
You can contact Paolo at [email protected]
Best regards,
Richard -
How to monitor ADFS 2012r2, Commercial services use HEAD and ADFS returns 500 instead of 200
I have set up an on-prim ADFS and an off-prim ADFS.
I want to use DNS Failover to monitor them and switch off-prim as required.
I've tried both Amazon Route 53 and DNS Made Easy monitoring, and both appear to use the HEAD command rather than the GET command. How can I monitor these services? ADFS 2012r2 does not seem to support the HEAD command.
curl -iX GET h t t p s ://fs.redclay.com/adfs/ls/idpinitiatedsignon.htm returns 200 whereas
curl -iX HEAD ... or curl -I ... return 500 or just hangs forever.
Only by the process of elimination have I come to the conclusion that the HEAD command is being used. I don't know how to sniffer SSL, but both DNSMadeEasy and AmazonAWS say the services are down when I know they are up.Hi,
Would you please be more specific about your requirements?
If you want to figure out how to use curl –iX command, you can refer to the Official Scripting forum below:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
If you have doubts about your third-party software, I suggest you contact third-party support to get accurate answers.
If you just want to monitor your ADFS servers, you can configure performance monitoring as this article guides:
Configure Performance Monitoring
http://technet.microsoft.com/en-us/library/ff627833.aspx
Best Regards,
Amy Wang -
How to monitor service failover in RAC?
Ok, I'm sure I'm being thick here, but i've been looking all morning and I can't figure out how to monitor when a service fails over from a preferred to available node.
I can't see any way to do it in OEM, and nor can I work out if it's supported by FAN
Does anyone have any suggestions before I start screaming/clawing at the screen?
Thanks
RupHello Buddy,
One of your users are using FAILOVER cause values SELECT and BASIC on query output. Another users connected on that moment no able to use FAILOVER probably caused by misconfigured TNSNAMES.ora file. Check it on client or apps server machines.
I hope this help u.
Sample of Tnsnames.ora
PRD =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC2-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC3-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC4-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = your_service_name)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 10)
(DELAY = 1)
Cheers,
Rodrigo Mufalani
http://mufalani.blogspot.com -
How to monitor a specific transaction in Solution Manager ?
Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker -
How to monitor OSD TS failure and get alert or report?
How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTechSpecifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon -
How to monitor all SAP Server through solution Manager?
Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
SachinHi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
After that you can include the systems using tcode <b>SMSY</b>.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v -
Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev ParambilHi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog -
Monitor all services on all servers?
Hi all
I'm looking for the easiest way of monitoring all services with startupmode=auto and alerts when state!=running. I found this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/dbb175c4-8ec0-4427-9d10-9382044144e7/monitor-all-windows-services-on-multiple-servers-and-recover?forum=operationsmanagerauthoring
So I took this code
Dim oAPI, oBag
Set oAPI = CreateObject("MOM.ScriptAPI")
Set oBag = oAPI.CreatePropertyBag()
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colListOfServices = objWMIService.ExecQuery _
("SELECT * FROM Win32_Service WHERE StartMode = 'Auto' AND Started = false")
If colListOfServices.Count > 0 Then
For Each objService in colListOfServices
If strDesc = "" Then
strDesc = objService.Caption
Else
StrDesc = StrDesc & ", " & objService.Caption
End if
Next
Call oBag.AddValue("Description", strDesc)
Call oBag.AddValue("State", "BAD")
Else
Call oBag.AddValue("State", "OK")
End if
Call oAPI.Return(oBag)
I used this in a two state monitor I created in our SCOM 2012 environment. For starters it runs every 2 minutes, it's enabled, monitor target is Windows Server 2008 Operating System, it's set to generate alerts on warning, the Unhealthy expression is:
Property[@Name='State'] Equals BAD
And the Healthy Expression is:
Property[@Name='State'] Equals GOOD
Unfortunately I'm getting no alerts at all. And I dont think I have any way of seeing if it's actually discovering all the services? AND I have no previous experience with vb scripting, but do have some powershell experience.
Any suggestions on how to get this up and running please?
Update: I just got alerts from all servers:
Workflow Runtime: Failed to run a process or script
The process started at 11:25:%1 failed to create System.PropertyBagData, no errors detected in the output. The process exited with 1.
Command executed "C:\Windows\System32\cscript.exe" /nologo "Company.ServiceMonitoring"At the first point make sure that you are creating the service monitor in Authoring --> Management Pack Templates --> Windows Service.
The place where we change is within the discovery part and not monitor. Search for the text what you entered as Service Name while creating the service monitor. You should see something similar to this,
<Discovery ID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec.DiscoveryRule" Enabled="false" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec" />
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
<ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<ServiceName>------------ServiceName>
<Frequency>60</Frequency>
<ClassId>$MPElement[Name="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceName$</Name>
<Value>$Data/Property[@Name='Name']$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
<Value>$Data/Property[@Name='BinaryPathName']$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/DisplayName$</Name>
<Value>$Data/Property[@Name='DisplayName']$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/Description$</Name>
<Value>$Data/Property[@Name='Description']$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value> </Value>
</Setting>
</Settings>
</InstanceSettings>
</DataSource>
</Discovery> -
How to monitor MySQL Server installed in Windows Server using Nagios
You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...
I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community
Maybe you are looking for
-
How can I open a keynote file that was made in Keynote Beta and downloaded from the web?
I have Keynote version 5.3 I want to edit a Keynote presentation made originally in Keynote Beta on the web. When I download it in .key it wont let me edit the file because it says I need a newer version of Keynote. When I try to download Keynote 6.0
-
Performance issue with Adobe forms
Dear SAP Experts, We have the following issue/requirement from our client. The client is on SAP ECC 6.0 - production environment. The client is highlighting performance issue while accessing the adobe forms for HR and FI business process ( both stat
-
Will we ever get unlimited data again?
Hi, I'm a semi-happy customer. I'm contemplating buying the Samsung Galaxy S4, but with a phone that great, you really need unlimited data. It gets expensive to purchase more data constantly, especially since my bill is already $125.00. With unlim
-
Create an Application Object schedule from command line?
Hi everyone - long-time lurker, first-time poster here. Is there a way create an availability schedule for an Application Object via a command line (or any other programmatic method)? The utilities I've obtained from Cool Solutions are great for repl
-
I recently downloaded yosemite and am trying to put items from my HD into trash. I keep getting a message "Finder wants to make changes. Type password."