How to monitor query usage / query activity in the system?

I am using 0TCT_MC01 to report the number of times the query was executed and by which user.
According to SAP Documentation,
The Technical Content for BI Statistics does not provide any standard queries for doing this. But you can easily create your
monitoring query based on the InfoProvider 0TCT_MC01 or 0TCT_C01 by using the key figures 0TCTQUCOUNT (counts every
navigation in a query) and 0TCTWTCOUNT (counts every call of a BI Application = initial opening of Workbook or Web Template).
0TCTWTCOUNT is a key figure in the cube. How to restrict this KF to display only Initial opening of Workbook or web template ?
Regds,

hi,
Use the follwoing CHARS for restriction in report from cube 0TCT_VC01.
0TCTBISOTYP --> Type of BI Application
0TCTBIOTYPE --> Type of BI Application Object
I hope it will help.
Thanks,
S

Similar Messages

How do I keep iPhoto '09 active on the dock

How do I keep iPhoto '09 active on the dock, similar to itunes when the window is closed...
It's so annoying when I close the window... and then when I open it later on, it has to load all the pictures again!
Is it possible to keep it active, even if there is no window open?
Peace,
JR

You can't.
The rule is simple: if you cannot do anythig with an app without a window, then it quits when you close the last window. So, iMovie, Aperture, Final Cut X, SystemPreferences and others all quit when you close the last window.
Use hiding. Or, if you're accessing files remember iPhoto doesn't need to be running is you use Media Browsers.
Regards
TD

HT201407 how to fix iphone could not activated because the activation server is temporarily unavailable

Dear All,
After I upgrade ios4.1 to ios6.1.3 but my iphone 3gs shows the sentence below:
how to fix iphone could not activated because the activation server is temporarily unavailable
Please give me the ways to fix it
Thanks in advance

Thi is usually a symptom that the phone has been hacked or jailbroken. Has it?

CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
AT the beginning I wanted to download In design program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
Have a nice day.
Sincerely, Jean-Pierre BRETHES
De : kglad
Envoyé : dimanche 6 juillet 2014 23:33
À : Jean Pierre BRETHES
Objet : CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
created by kglad <https://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

How to Identify incoming and outgoing IDOC in the system for last one year.

Dear All,
How to Identify incoming and outgoing IDOC in the system for last one year.
Regards
Ashok

Dear Anindya,
I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
This is only the way to identify?
Thnx
Ashok
Edited by: ashok singh on Oct 22, 2009 8:40 AM

Missing Fonts when fonts are activated on the system.

I created an Indesign CS6 document (334pg book) and used ITC Garamond Bold for the document subheads. This was done with a paragraph style. After editing the document I get a missing font warning for ITC Garamond Bold. The font is activated on the system using Suitcase Fusion 4. If I create a new document the font is available. Both documents open. One shows the font missing. On a Mac OSX 10.6.8. Any ideas on fixing this missing font error?

Why not obtain FontFingler or FontNuke and run these font cache burping utilities and see if the problem goes away? Is it installed in more than one place? Does one of your documents have a Document Fonts subfolder and the other doesn't? Did you maybe try to Export the afflicted document to IDML, and then turn around and re-open that file?

HT1379 Summary: how to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards.

How to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards?
Insert the SD card.
System opens iPhoto with SD contents.
Want to transfer files from SD card to system drive. iPhoto closes
SD card directory removed from the Finder window and is not available again.
I don't want to have to reboot the system every time I want to perform this option.
What's wrong here.
The support columns show this isn't an isolated incident with all sorts of solutions possible.
This is a simple task - there should be a simple method for the system to recognize SD cards.
What's the answer?
I've reviewed a recommendation to reset the SMC.
https://discussions.apple.com/message/18500187#18500187
and
http://support.apple.com/kb/HT3964
and another thread that says, basically, you must buy extra hardware to perform this simple task,
https://discussions.apple.com/message/16911326#16911326
another one that has the same problem with OS Mountian Lion,
https://discussions.apple.com/message/21919740#21919740
another one with the problem that says SD cards can't be read by Apple unless the card is formatted specifically for Apple, ie. that Apple is not compatible with other cards, but the problem maybe something else that requires Apple service - (bad SD card reader?).
https://discussions.apple.com/message/18711818#18711818
there are probably more discussions, but I dont' want to spend my entire sunny in Seattle day working this.
thanks for the help!

Bucky Fullmeister wrote:
When I plug in an SD card, the finder window shows it under the DEVICES section. At this point, I can drag the contents to the hard drive. However, when I screw up and click the character on the right side of the name - it apparently closes the SD card and I can't find any command to reload or re-recognize the card. I have to remove and reinsert the card and then sometimes it recognizes the card. Other times I reboot and it will recognize it.
What does that character on the right side of the SD card name do? Is it an eject function - with no way to subsequently reread the drive?
It ejects or unmounts the card. When the SD card mounts click on it once to highlight it and then drag the files shown within it to the new folder.
Pete

Infoobject 0CEPRCS5 not active in the system

hello all,
When I am trying to install anything from BI Content. I am getting these pop ups:
Infoobject 0CEPRCS5 not active in the system and is being deleted"
And it keeps on going for alot of infoobjects, a few of them being 0CEBQRQM,0CERVSVOL,0CECLSM ...all are starting with 0CE.
I need to hit ok to get through all these pop ups and then my objects continue collecting.
What is this pop up for, is any one else seeing these pop ups?
Thanks,
Kiran

For the sake of discussion, I have the same issue for e.g. 0VKAPPSID and 0VKDLGID, when collecting the <i>not assigned characteristics</i> IOCatalog and the related objects before the data flow.
Davide

How to monitor CPU usage and performance on a Hyper-V server with several VM's

I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system.
I have set up three Virtual Machines, all running Windows 2008 32 bit.
Build server, running Team City
Staging server
SQL Server, running SQL Server 2005
I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.)
So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

First, you have to remember that in Hyper-V that the "host" is called a parent partition and it really just like a virtualized guest with special permissions and roles. Just like any other child/guest, when you open up Task Manager, you can not see the CPU
usage of the other children on the server.
Ben Armstrong has a good explanation of this here:http://blogs.msdn.com/virtual_pc_guy/archive/2008/02/28/hyper-v-virtual-machine-cpu-usage-and-task-manager.aspx
To summarize his post, you need to check three things to get an accurate picture of CPU utilization:
View the CPU usage on each guest - this is available through Hyper-V Manager or Performance Monitor.
CPU usage due to context switching - this is the perfmon counter called % Hypervisor Run Timeunder Hyper-V Hypervisor Virtual Processor
Child partition worker process - vmwp.exe running on the parent partition (1 per child). This handles Hyper-V operations like saving
state.

How to monitor memory usage of "Memory-based Snapshot" executable (MRCNSP) in Linux?

We have noticed in the past that MRCNSP/Memory-based Snapshot program executable consumes around 3.8 GB of memory on the linux VM. I understand that value change planning is 32 bit executable so 4 GB is the limit. I want to monitor the memory usage of the executable when the program runs. The program usually runs overnight. I wanted to check with you experts if you have any MRP executable memory usage monitoring script that I could use.
I found the metalink note OS Environment and Compile Settings for Value Chain and MRP/Supply Chain Planning Applications (Doc ID 1085614.1) which talks about "top -d60 >>$HOME/top.txt". Please share your ideas for monitoring this process.
We do not use Demand Planning or Demanta or Advanced Supply Chain Planning which are 64 bit application. That is our future direction.
Environment:
EBS : R12.1.2 on Linux. The concurrent manager is on 64 bit linux VM, web services on 32 bit VMs.
DB: Oracle DB 11.2.0.3 on HP UX Itanium 11.31. Single database instance.
Thanks
Cherrish Vaidiyan

RAM on the controller is not the same as the C: drive. With respect to the controller, you can think of it in the same terms as your computer. RAM is volatile memory and your C: drive is non volatile flash memory.
Depending on the frequency of the temperature excursions above and below your 70C threshold, the service life of the controller and the method you used to append to the file, there could be a number of issues that may creep up over time.
The first, and the one you brought up is the size of the file over time. Left unchecked this file could grow continuously until the system literally runs out of flash memory space and chokes. Depending on how your are appending data to this file, you could also use more than a trivial slice of processor time to read and write this big file on disk. While I have not personally ever run one of the RT controllers out of "disk space", I can't imagine that any good could come of that.
One thought is to keep a rolling history of say the last 3 months. Each month, start a new file and append your data to it during the course of the month. Each time a new file is created, delete the data file from something like 3 months ago. This will ensure that you will always have the last 3 months of history on the system, however the monthly deletion of the oldest data file will limit you to say 3 files at whatever size they happen to be. Unless there are hundreds of thousands of transitions above and below your threshold this should keep you in good shape.
I also eluded to the method you use to write to this file. I would ensure that you are appending data using the actual file functions and not first reading in the file, appending your data as a string then writing the entire file contents back to disk. In addition to causing the highest load on the file system this method also has the largest system RAM requirements.

Prevent user defined query from being activated with the CopyTo function

Hi, I have a user defined query defined in one of the quantity field (in the grid) in the goods receipt PO window.
The query updates the quantity depending on the number of another line field. The query works great, but I dont want it to be activated when a user clicks the "Copy From" purchase order. When this happens the query gets activated and changes the quantity.
The query is defined to be activated "when exiting altered column", i have not selected the "Refresh Regulary"
Please help!

Thank you so much for replying,
this is my query, depending on the column U_Empaque (type of package), I look for the right conversion in the OITM table of the item. Then I use the number from the column U_Cantidad_Empaque (Quantity Of the Type of package) to multiply by the conversion factor that I have defined for the Item in the OITM user fields. The conversion is a standard conversion, so It needs to be modified by the user to set it to the real quantity of the unit of measure (or unit of inventory). The query works great, except for the CopyTo and CopyFrom functions.
Iam using 2007 A patch 45.
México's settings.
SELECT
CASE
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE1 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION1 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE1 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE2 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION2 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE2 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE3 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION3 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE3 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE4 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION4 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE4 = $[$38.U_Empaque.0])
END

How to monitor memory usage in a cRIO controller?

I have an application where I suspect the customer is operating in a hotter environment than they are claiming. I prepared the RT host vi to log a simple text file directly on to the RT's C: drive. In this case I'm only logging the transition of events when the chassis temperature exceeds 70C and then becomes less than 60C along with a date and time stamp. (It's not continually logging data.) However, I'm concerned that over time (i.e months from now after I've long forgotten the project) the file will get overly large and affect system operation. There are articles that deal with memory management but I'm not sure how to interpret them. They talk about RAM. Is RAM the same as the C: drive on the controller? How do I determine the available memory on the C: drive; like using "dir" in the old DOS days? What is the best Knowledge Base article that deals with this issue. This system is a stand alone application. (The host PC is not normally connected.) I am using a cRIO-9012 controller and LV v.8.6.
Dave

RAM on the controller is not the same as the C: drive. With respect to the controller, you can think of it in the same terms as your computer. RAM is volatile memory and your C: drive is non volatile flash memory.
Depending on the frequency of the temperature excursions above and below your 70C threshold, the service life of the controller and the method you used to append to the file, there could be a number of issues that may creep up over time.
The first, and the one you brought up is the size of the file over time. Left unchecked this file could grow continuously until the system literally runs out of flash memory space and chokes. Depending on how your are appending data to this file, you could also use more than a trivial slice of processor time to read and write this big file on disk. While I have not personally ever run one of the RT controllers out of "disk space", I can't imagine that any good could come of that.
One thought is to keep a rolling history of say the last 3 months. Each month, start a new file and append your data to it during the course of the month. Each time a new file is created, delete the data file from something like 3 months ago. This will ensure that you will always have the last 3 months of history on the system, however the monthly deletion of the oldest data file will limit you to say 3 files at whatever size they happen to be. Unless there are hundreds of thousands of transitions above and below your threshold this should keep you in good shape.
I also eluded to the method you use to write to this file. I would ensure that you are appending data using the actual file functions and not first reading in the file, appending your data as a string then writing the entire file contents back to disk. In addition to causing the highest load on the file system this method also has the largest system RAM requirements.

Paralled query taking all slaves in the system

This query takes all the slaved in the system...
i tried using the not exists, still takes all slaves.. although it shd take only 8 (/*+ Parallel(b,8) */)
any help?
how to tune this? reduce the number of slaves?
SELECT /*+ Parallel(a,4) */ distinct a.dept, a.location
FROM Hist a
WHERE date_pos between (select eom_date+1 from system_variables)
and (select next_eom_dt from system_variables) AND tran_code= 11
MINUS
SELECT /*+ Parallel(b,8) */ distinct b.dept, b.location
FROM reference b WHERE tran_code= 11

We need sample data to evaluate SQLs
*009*

Z87-GD65 - how to make E2200 network port active in S5 system power state?

My question is how do I make the E2200 network port active in the S5 system power state on the MSI Z87-GD65 motherboard?
I require Wake on LAN (magic packet) for my computer but after shutdown the network port is inactive hence the WOL packet can not wake the computer. I have checked and activated the following items:
On the motherboard
- EuP 2013 = disabled
- Resume by PCI-E device = enabled
In Windows 8.1 E2200 network port settings
- Wake on Magic Packet = enabled
- Energy efficient network = disabled
After I shutdown (power state S5) the network port activity lights go dark so I assume the port has shutdown as well. On my previous Gigabyte motherboard the network port stayed active allowing WOL packets to be transmitted to turn on the pc. Have I missed a setting on this new motherboard? My workmate also bought the same motherboard and has the same issue.

Success!
MSI support responded and listed the correct settings and it is working!
So the correct settings are:
In the motherboard BIOS:
- LAN Option ROM = Enabled
- EuP 2013 = Disabled
- Resume by PCI-E device = Enabled
In Windows 8.1 E2200 network port settings:
Under Power Management:
- Allow this device to wake the computer = ON
- Only allow a magic packet to wake the computer = ON
Under Advanced:
- Energy Efficient Ethernet = Disabled
- Shutdown Wake Up = Enabled
- Wake on Magic Packet = Enabled
All working fine now. All I was missing was the "Shutdown Wake Up" setting. I hope this helps anyone else who has this excellent motherboard.

Tracking of user activity in the system

i'm currently on a project which i need to use BI to track the user activity on the SAP System example like the time they log in or out, the transaction thay made etc. was juz wondering if anyone can give me some idea, solution or a head start in my project. thanks.

Hi,
You could use the tables USR01.....thru USR07 etc. These tables contain user information like name,login times etc.
eg .USR07 gives the tcode etc.
You could create a view to extract the appropriate fields. Then create a datasource using either the view or a function module. You'll have to decide your requirement. Then the rest in BI is pretty standard. The only point should be what data to extract from which tables and how...
Assign points if useful
Regards.

How to see who are currently logged in the system through in EP

hi,
I want to see , who are currently logged in the system through in EP , like al08 or sm04 in r3.
Please guide me

Hi,
Portal activity reports will help you in getting all the user details who are logged on to the portal.
Portal activity reports help you which page or iview the users visited.
There may be many content in the portal. But the monitoring people mainly wants what content people are mostly visiting. This can help them to update that content frequently. Not only that the content people are not visiting can be made more attractive or it can be removed also.
using portal activity you will not get what content the user is accessed, but you can get the what content(iview/page) most users are visiting.
Raghu

How to monitor query usage / query activity in the system?

Similar Messages

Maybe you are looking for