How to monitor SM50 spool work process wait time from RZ20

Hello All,
I want to monitor the SM50 spool work process wait time from RZ20 (like dialog response time from rz20). Please help me to how to do this.
Regards
Subbu

Hi Subbu,
You may refer SAP help on CCMS to get the list of MTEs to be configured for spool monitoring.
MTE
Description
SpoolNumbers
Spool numbers that every output request is assigned
UsedNumbers
Percentage usage of the spool numbers; you must delete old output requests before this number reaches 100 percent
Status
Is only displayed if the spool service belongs to an SAP application server
WaitTime
Wait time in the spool service in seconds
Monitoring the Spool System (SAP Library - SAP Printing Guide (BC-CCM-PRN))
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Working with multiple spool work process

    We have around 2500 spool request generated every day on an average.we had only 1 spool work process,last week we increased it by 1 and now 2 spool work process there in the system
    But we are not getting any help from second spool work process as all spool request are handled by any one at a time and other w/p is in waiting mode.
    Is there any way to make both work process work together within sap policy of "Printu2013inu2013orderu2013ofu2013generation"
    I created new output device hoping that spool request created for this will go to other but no help
    Regards
    Shahnas.S

    Hi ,
    I think we can't manage the spool work process(infact any work process) ,It is  SAP internal Mechanisam
    Please have a look on
    Note 108799 - How many spool work processes for each instance
    Regards,
    Srini Chapa.

  • On RZ04 (I am not able to see my spool work process in the list...)

    Hi Friends,
    I am using ECC6. I have defined 7 (4 dialog, 2 background, 1 spool) work processes on dialog instance.
    Now I am trying to define operation mode using rz04. But when I define the number of dialog and background work porcess according to day time or night time. I am not able to see my spool work process in the list. It looks like:
    OP Mode______________Dia______BP______BPA______Spo______Upd______Up2______Enq______Sum
    B30_AS_Day____________4______3________________________________________________________7
    B30_AS_Night___________3______4________________________________________________________7
    Please ignore the underline ( It is just for formatting the output).
    Please tell me how can I resolve this issue.
    Thanks

    Hi Tiago,
    Yes, I have set the rdisp/wp_no_spo on the instance profile and restarted the instance after update.
    Now, I check the value of rdisp/wp_no_spo in RZ11.
    It shows like:
    Dift value______   0
    ProfileVal______    1
    Current value____   1
    So, Plesae tell me how to resolve this issue.
    Thanks & Regards
    Ajay Saini

  • Maximum work process hold time exeeded

    HI ALL,
    My user is running one Report painter report. He is getting the values in the report with out any issue. But after trying to filter the data, he is getting the error as "Maximum work process hold time exeeded".
    And some times he is getting the same error while exporting the data to the local file from the report.
    Is it because of SAP GUI version and patch level?
    Kindly let us know.
    Thanks & Regards
    Shankar

    HI Pradeep,
    Thanks for your reponse.
    Could you please give me some details of that technical step, where i have to set the time , where can i get that parameter ID etc...
    Thanks In advance.
    shankar

  • Maximum work process hold time exceed

    Dear all,
    One of my SAP user got the below error in SAP PROD server , kindly check below logs .
    u201CIRP maximum work process hold time exceed. This may be caused by network problems or slow front-end-systems.u201D
    Note : SAP Gui also latest installed , still the user got the above error .
    Kindly suggest

    This error message means that the SAP server (a workprocess) wanted to send data to the frontend (SAPGUI) but the frontend didn't either confirm that the data could be sent or the data didn'T reach the frontend at all.
    As already specified in the error message itself this can be caused by a slow (swapping) frontend or by network problems.
    Another reason can be local firewalls or firewalls between the server and the frontend.
    Markus

  • How do i delete  multiple emails at one time from iphone Mail account with iphone 4s?

    how do i delete  multiple emails at one time from iphone Mail account with iphone 4s?

    Better than that!
    http://www.youtube.com/watch?v=fKa-KFjUIGE
    Select a message, hold the move button, deselect the message while still holding the move button.
    A new window appears allowing you to move all messages to the trash.
    Bingo!

  • How do I delete  one item at a time from trash?

    How does one delete one item at a time from trash?

    In general, one doesn't.
    I suggest you create a new folder (I use "Trash Soon") on the desktop near the trash icon. Move all the stuff out of the Trash bin into the Trash Soon Folder. Then move the things you really want to eliminate to the Trash can. Empty Trash.
    DO NOT store anything you want to keep in the real Trash can. There are many activities that may cause "Empty Trash" a a side-effect.
    If you have multiple drives, The Trash is an illusion created for your convenience. The actual Items may be on several different drives, but all marked as "in Trash". Moving them to a folder on a different drive may cause unexpected copying.

  • How to get process start time from BI BPM Data Source

    Hi,
    I would like to get the process start time using the VC data source BI_BPM_MY_PROCESSES_DS.
    The return parameter BI_START_TIME_VALUE returns numbers like 1.271.858.563.350,00. This seems to be ms beginning from 1970.
    I tried the following to get the current date/time but it didn't work:
    =DTADD(DATETIME(1970,01,01,00,00),@BI_START_TIME_VALUE,'Z')
    Any idea how to do this?
    Thanks,
    Kevin

    Hi Experts,
    Do you have ideas for this SQL query ?
    Regards.

  • How does the Delta functionality works while updating Infocube from PA

    Hi Gurus
    How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
    As I have weekly based planning, every week we have to update the forecast into the Cube. If I update  every week into the Cube , then the values are going to append  in the Info cube.
    Shall I create ODS in between the Planning area  and the Info cube .
    (or)
    Any other method ?
    Please Suggest.

    Hi Preetham,
    Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
    if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
    regards
    ravi

  • How to transfer phone contacts(all at a time) from...

    hi friends, first of all, i have a nokia6280, motorolaL6 & Ericsson W810i ..................................................​... ............ "IS THERE ANY POSSIBILITY TO TRANSFER CONTACTS (IF POSSIBLE OTHER STUFF TOO) FROM ONE TYPE OF PHONE, SAY NOKIA TO ANOTHER TYPE OF PHONE, SAY SONY ERICSSON,AND VICE-VERSA" .................................. i tried to use pc suite, but it only transfers from one nokia to another (as it is meant to be, ofcourse) ................... ......... ........................................... to transfer it by sims is easy. but in my case 3 network phones do not accept any other network(o2,orange)sims, so it is not working that way too. ............................................. transfering by bluetooth is not working in my case(from nokia 6280 to motorola L6 and Sony Ericsson k810i) when i try it , it only transfers one contact at a time, and that really kills time and is ridiculous too .................................... .................please help

    Is the MQ Queue local or remote?

  • Wait time from WIP to finished product

    Dear PP experts,
    I have a case need your help:
    We're a construction company, we have a concrete factory.
    Our product (called spun pile) is made from concrete and mixture.
    In put: concrete + admixture
    Out put: spun pile (WIP)
    usually, it takes 7 days for a spun pile (WIP) becomes a finished product.
    in other cases, we have to speed up the progress, so, we put the spun pile (WIP) into heat oven. It only takes 1 or 2 days for a spun pile (WIP) becomes finished product.
    In total, we have production date, called A (date)
    We have wait time, called T (days)
    We have the date that we can sales finished product, call B (dates) = A + T
    Can we manage it in SAP PP? We expect after T days, stock in finished product will be increased, automatically, instead of manually do the stock transfer in SAP MM module.
    Please consult me on this. Thanks in advance.
    Regards,
    Gent
    Edited by: Nguyen Phuoc Toan on Jun 18, 2011 9:15 AM

    Hi Toan,
    Can you explain your business in this case? If you want to check available in SO, you need to setting waiting time in routing, if you need to receipt into stock, it impossible.
    KietNVT

  • How to monitor Print Spool folder in Business Objects XI R2 - Crystal report

    Hi Guru's
    We recently had a issue where disc space was full in BO server and it was down. The reason was there was one job in print spool folder which was eating up whole space in C drive.
    We had to stop the print spool service and delete the jobs and restart it back.
    In order to prevent this from happening what can be done??.
    One way that my client suggested is to write a script where in it will send us the size of print spool folder every hour so we can find the report which is causing this. I have no idea how this can be done.
    This happened once and I dont have an answer when my manager asks will it happen again. Is there a way where we can monitor this or stop this from happening.
    My current environment is
    BOXI R2 , crystal report XI is the reporting tool.
    Thanks.

    Normally you should run your CR reports in the INfoView. You can start a report either by double clicking on it or by selecting View in the context menu. Still in order to fetch data you have to press the Refresh button in the CR viewer window (in the InfoView).
    In the CMC I assume that you are using the Run now option in the context menu. Please note that this will just schedule your report immediatelly. hen the report is scheduled a new instance is created hich is available in the History of the report. In order to see a report in the CMC select again View in the context menu and you can again fetch data by pressing the Refresh button.
    Regards,
    Stratos

  • How many Maximum number of work process supported by one application server

    Friends,I have one confusion about the WP number:
    how many maximum WP supported by one applicaiton server?
    the appication server ENV is ECC6.0aix5.3oracle 10g on p595,if the supported maximum WP number is determined by number of CPU?if yes,what ratio between WPs and CPUs,thanks
    Edited by: qz sun on Apr 8, 2008 10:47 AM

    Hi Sun,
    Please click on below link and you will get the solution.
    http://help.sap.com/saphelp_erp2004/helpdata/en/19/da1c3d2b058c4ce10000000a114084/content.htm
    Regards,
    Anil

  • How to generate a spool extsion. txt or. dba from Application Express- Apex

    ?:| I am new in the management of Oracle Express seems an excellent tool to
    work, when I have a difficult to generate the flat files (. txt,. dba,.
    csv, etc) ..
    {color:#0000ff}*I know that I must configure Oracle Express to generate the flat files in that folder and find the results are stored?*
    {color}Example: I have the following query:
    {color:#0000ff}{color:#000000}spool pagos.txt
    select *
    from pagos
    order by id_pagos;
    spool off;{color}
    If the generated file (. Txt,. Dba,. Csv, etc.) in which folder holds the result?{color}
    I appreciate your cooperation ..._

    You don't need to spool a file. You could:
    1. create a report,
    2. enable .csv output (report attributes / report export)
    3. and you will see a link for downloading the results from your report.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    ------------------------------------------------------------------------------

  • No audio in source monitor but it works on the time line

    Hi
    I just started to use a Canon XF300 and I have noticed that when I double click on a file and it opens in the source monitor the video plays but I get no audio. If I drop that same clip onto the time line I get video and audio.
    Is there a setting I am missing?
    Thanks
    Dennis

    Hi
    Yes both Channel 1 and 2.
    Also I just came across another funny thing. After opening the first clip in the source monitor I can not open any other clips unless I open them from the time line. Double click a clip in the time line so it opens in the source monitor and then THE SOUND WORKS!  Weird.
    Dennis

Maybe you are looking for