How to monitor transactions in OEM

Hi All,
Can anyone please tell me how can I monitor transactions in OEM 12c Cloud Control?
Thanks in Advance!!

You can manage them with the Java Console but with limited functionality. It will be best to use Grid Control if you have the license.
Metalink Note:277066.1 shows features available in the different EM versions.

Similar Messages

How to monitor a specific transaction in Solution Manager ?

Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How to monitor a transaction that is doing rollback

Hi gurus,
I need to know how to monitor a transaction that is doing rollback. I want to see the status of the database just in that moment.
My version is 8i. The upgrade is comming, but I have a problem that is urgent.
Thanks in advance

My version is 8i. The upgrade is comming, & so is the 22nd Century. Which will occur first?
but I have a problem that is urgent.
SQL> desc v$rollstat
Name                            Null?    Type
USN                                  NUMBER
LATCH                                  NUMBER
EXTENTS                             NUMBER
RSSIZE                              NUMBER
WRITES                              NUMBER
XACTS                                  NUMBER
GETS                                  NUMBER
WAITS                                  NUMBER
OPTSIZE                             NUMBER
HWMSIZE                             NUMBER
SHRINKS                             NUMBER
WRAPS                                  NUMBER
EXTENDS                             NUMBER
AVESHRINK                             NUMBER
AVEACTIVE                             NUMBER
STATUS                              VARCHAR2(15)
CUREXT                              NUMBER
CURBLK                              NUMBER

How to monitor disk space in BW

can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?

When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA     ARFC Call Data (Callers)
BALDAT          Application Log: Log data
BSRWBSTORE     Storage for binary large objects (Excel)

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

How to monitor oracle 11g database sessions on Windows 2008 server?

Hi Experts
How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence. i never tested it but seems impresive. It is free and i think it would be use ful to you.
http://myorasql.com/
You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

How to monitor RFC processing in XI

Hi Friends,
In the IDoc to RFC scenario please tell me How to monitor RFC processing in XI..
Thanks and Regards
Sri

Sri,
You can monitor in SXI_MONITOR/SXMB_MONI. If its Syncronous then u can see the request and response messages in the above mentioned transaction.
To get more details you can go for RWB and select ur message and check for audit log's.
Best regards,
raj.

Monitoring Transactions by name

Hi,
when monitoring transactions by name, the name is the class and method
of the called ejb. This does not make a sense if the same physical bean
is deployed several times with different jndi names. Is there any
possibility or plan to distinguish transactions rather by their logical
name (jndi name or name in the deployment descriptor) than by the
classname?
Thanks,
Daniel

Hi Rogerio
I've spent the day investigating the same thing and it appears it is simply how the ALSB ReportingMDB gets invoked. Every time it checks for a message it creates a new Transaction and then rolls it back without so much as a whimper. I have no idea it would work like this but I've got about 12 OSB installations and they are all doing the same thing with no clue as to why it is behaving this way.
I think it is messy but it doesn't seem to be an issue in and of itself.
Cheers
Brock

How to monitor idoc in PI

Hi Gurus,
how to monitor idoc and how many IDOC s come to in XI /PI ?
Regards
sreeni

Hi Sreeni,
How to monitor the idocs:
To monitor the idocs we have many transactions in R/3
we02: Gives the list of idocs based on your selection criteria
we05: Gives the list of idocs based on your selection criteria
BD87: List of idocs which are ready to be sent out of R3
SM58: If the idocs are sent out of R3 but still in the TRFC queue
Coming to XI/PI:
You can check the idoc in trnsaction IDX5 which is the idoc mionitoring tool.
How to check the count of idocs in XI/PI:
The direction of the IDOCs which are sent out of R3 is always 1. Hence if you can go to transaction we02 and give the appropriate selection parameters and select direction as 1 you would get all the IDOCs sent out of R3 to respective receivers.
Hope this helps.
Regards,
Sarvesh Desai

How to Monitoring of BPM?

How to Monitoring of BPM?

Hi,
   You can use the following tcodes to monitor BPM.
   1) SXI_CACHE - Check for the Return Code. It should be 0. Otherwise there is some problem in your BPM Scenario.
   2) SXMB_MONI_BPE - Entry point for the following transactions.
          SWF_XI_SWI1
          SWF_XI_SWI14
          SWF_XI_SWI6
          SWF_XI_SWI2_DIAG
          SWF_XI_SWPR
Thanks,
Vivek LR

How to monitor Alert file large in EM Grid

Hello,
In Enterprise Manager 9 we used to monitor Alert File Large.
I am not able find this in Grid Control.
Can anybody tell me how to monitor this metric in OEM 10 GRid?
Best regards,
Jvries

You must to select the host target and metric and policy issues
Select all metrics and search File or Directory size MB
You can to add the file when you want to monitor the size and
you must to enable a response action when the critical theshold appear
The response action must be a shell script like this
#/bin/ksh
#if you want backup
cp /directory/file.log /backup_destination/file.log.bak
#for clean the file and his size was empth
/directory/file.logRemember that you want enable the credentials for host and the owner of agent had rights of read and write in the location of file
Regards

Services Monitoring Dashboard in OEM

when I tried to run Service Monitoring Dashboard in OEM, one of the screen ask for the "Web Application to included in this report" so I was trying to picl the web site "EM WEbsite" (the only one target type that I have in my GRID), two questions
1. what is this EM Website for?
2. right now it show as down, do I need for it to be up? everything in my GRID seems to work ok but this guy is down and I don't know what it's for.
Thanks,

The EM website is EM's user interface - i.e. <hostname>:<port number>/em.
Service Leve Management (SLM) in Enterprise Manager is designed to help you model the service level agreement or operational level agreement that you define between your business users and IT, and between IT groups. To monitor the service level of applications, SLM is typically used with EM's synthetic transaction monitoring capabilities. For example, you may want to define synthetic transactions to simulate end users logging into your application, issuing queries, clicking on links, etc... in order to collect controlled measurements of application performance and availability.
Since Enterprise Manager itself is an application, we decided to set up a test to monitor it at well. What you typically want to do is to take the base setup that we provide to you, and add more beacons. Beacons are synthetic transaction "robots" that are used to send these synthetic transactions to the applications. For example, if your data center where EM is located is in the U.S., and you have administrators logging in from the U.K., you may want to deploy a beacon at their location so that the beacon can test from their location whether they can access EM or not. I am not sure why your EM website is down. Chances are something changed in your EM setup and the synthetic transaction is no longer valid. All you have to do is replace the existing test with a new one. At any case, the EM website being down is not going to affect your use of SLM in EM.
Hope this helps.
Chung Wu
[Application Management Blog|http://www.appmanagementblog.com]

Excessive database timeouts. How to monitor?

Hi
There are excessive Timeouts being recorded on the database. using db console or OEM what is the best way to investigate this, and the reasons behind it?
Thanks.
Oracle 10.2.0.2.0.
DA

not sure how you would monitor this in oem or dbcontrol. it may not be oracle timing out the session. from a troubleshooting aspect I would look at client sqlnet trace or maybe setup dead connection detection by setting / tuning sqlnet_expire_time in your sqlnet.ora which should help reduce timeouts.

How to monitor the performance of EBS iAS?

Hello All,
I am looking for your advise on how to monitor the performance of EBS (11i/R12) iAS
How to measure iAS worload during a certain period?
How to know the number of iAS hits/requests?
How to the iAS response time?
Regards,
Tareq

Thanks EBSDBA and Helios for your time.
Are there any scripts/reporting tool that helps me monitor iAS performance other than OEM for EBS?
Note:370583.1 is very helpful in monitoring JDBC connections. Are there any similar Notes/scripts that can answer my questions:
How to measure iAS workload during a certain period?
How to know the number of iAS hits/requests?
How to the iAS response time?
Appreciating your cooperation,
Tareq

How to monitor service failover in RAC?

Ok, I'm sure I'm being thick here, but i've been looking all morning and I can't figure out how to monitor when a service fails over from a preferred to available node.
I can't see any way to do it in OEM, and nor can I work out if it's supported by FAN
Does anyone have any suggestions before I start screaming/clawing at the screen?
Thanks
Rup

Hello Buddy,
One of your users are using FAILOVER cause values SELECT and BASIC on query output. Another users connected on that moment no able to use FAILOVER probably caused by misconfigured TNSNAMES.ora file. Check it on client or apps server machines.
I hope this help u.
Sample of Tnsnames.ora
PRD =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC2-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC3-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC4-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = your_service_name)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 10)
(DELAY = 1)
Cheers,
Rodrigo Mufalani
http://mufalani.blogspot.com

How to monitor transactions in OEM

Similar Messages

Maybe you are looking for