How to monitor XI scenarios? Kindly help!

Hi Experts,
      I have two scenarios:
      1. (.Net application)webservice - XI - RFC(SAP R/3)
      2. (TIBCO)JMS - XI - RFC(SAP R/3)
       How do I monitor if SAP R/3 is down? I need to trigger an email alert.
       How do I monitor if .Net application is down? I need to trigger an email alert.
       How do I monitor if TIBCO is down? I need to trigger an email alert.
       How do I monitor if XI itself is down? I need to trigger an email alert.
      Kindly help!
Thanks
Gopal

How do I monitor if SAP R/3 is down? I need to trigger an email alert.
If data is send to R3 and if the system is donw then thru alert config u will be able to montior it. if r3 is down u can find some BASIS components that will do this job. for this u need to check with ur basis team
How do I monitor if XI itself is down? I need to trigger an email alert.
check for the basis components that mails the admin abt the system failure.
How do I monitor if .Net application is down? I need to trigger an email alert.
How do I monitor if TIBCO is down? I need to trigger an email alert.
if data is pulled by xi adapts then configuration of alerts will just do. for any adapts that is based on polling method mail can be send by configuration of alerts. for trigger event methods like http and proxy (sender) then we need to check for other workarounds....remember bhavesh commenting on alerts for intimating r3/xi failure without any workarounds but dont have the link now

Similar Messages

Kind help on Revenue Recognition

Friends I need some help on revenue recognition.
Example of a bundle solution that includes product license, education and consulting services. One parent SKU that auto-explodes into three child SKUs – product, education, consulting.
1. Booked revenue is allocated to one PL (based on parent SKU). Do we need to create a new unique PL? Can this be re-allocated to 3 PLs? How is this done?
Example of a Education blended offering which includes different delivery methods – ILT, video-ILT, eLibrary (WBT modules) and certification. One parent SKU that auto-explodes into the child SKUs. Each child SKU will trigger the appropriate behavior similar to the standalone offering. Customer will need to get a voucher for each component to redeem against.
2. Can we still track revenue for each delivery method and certification by the child SKU? If not, why not and how can this be done?
3. Will revenue recognition be handled separately for each component (child SKU) or as part of the bundle, by the parent SKU. For example, we send the customer a voucher for each component, sometime revenue can be recognized when the voucher is sent to the customer (eg. WBT can recognize revenue immediately once the voucher is sent to the customer).
4. Issues/requirements we need to be aware when setting this up?
If some one know how to deal with these kindly help me out...
Thanks for all the help...

An invoice cancellation would reverse all the FI entries hence the revence would be reduced by the revenue amount posted by that invoice...
Actually all the entries posted to FI would be reversed
Further use your imagination....
Regards

How to test system down in XI? Kindly help!

Hi Experts,
 I have a JMS -> XI ->SAP R/3 scenario.
 If the remote SAP R/3 is down then I have to trigger an alert.
 In the runtime workbench, i have configured the alert in Alert Configuration.
 In this I have given the alert category, receiver service, interface and namespace.
 How do I test the system down scenario without actually making the system down?
I have tried to test it via runtime workbench test tool and stopping the receiver communication channel. But SXMB_MONI shows the message successfully processed.
 Why the XI message is not in error?
 How do I actually test this scenario?
 Kindly help me!
Thanks
Gopal

> 1. The report RSARFCEX to restart this message from
> SM58.
Correct.
> 2. Executing report RSQIWKEX restarts errored msg in
> SXMB_MONI.
It restarts the error messge from the Queue in SM58. If the message is deleivered successfully from Sm58, the message in MONI gets updated. It does not restart the message from MONI.
> 3. Msgs are processed in tRFC queues only in IDOC
> scenarios.
Ths blog has answers ,
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Further in asynchronous communication, the calls can be executed either by tRFC (Transactional RFC) or qRFC (Queue RFC). In tRFC, RFC calls are stored in database along with corresponding data under a unique transaction id (TID). However in tRFC, LUW (Logical Unit of Work) are executed independently of each other and the sequence specified by sending application is not maintained. And this particular requirement leads to qRFC communication wherein all LUWs are processed in the same sequence as determined by sending application.
Not only Idoc's used by other Interfaces as well.
Regards
Bhavesh

How does RFC adapter with EO/EOIO work? Kindly help!

Hi Experts,
How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
In my Async RFC - XI scenario sometimes XI is able to receive the messages but sometimes it doesnot even though the sender system is UP and running.
I cannot see any messages in SXMB_MONI even though the sender has sent the messade.
Why RFC adapter is behaving like this? What could be the issue?
Kindly help!

EOIO: How does this queueing work? Does it use FIFO logic?
>> yes it uses FIFO logic in EOIO.
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
>>>noof rfc connections we are using for connecting to XI to RFC minmum is 1 maximum is 50 bydefault. you increase this value by changing the default setting.
How does RFC adapter with EO/EOIO work? Kindly help!
Posted: Mar 21, 2007 4:15 AM
Hi Experts,
How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
Why RFC adapter is behaving like this? What could be the issue?
>>check ur sender RFC adapter. chekc whether data is sent from RFC . see logs in R/3.

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

I have amny duplicate contact numbers under various names , coz when i syncronised my i phone with facebook this happened , now i want to identify them and delete them kindly help how i can save my time

i was using blackberry earlier and when i syncronized it with facebook and gmail it added many contacts to my phonebook leading to duplication , now i have got all thoes contacts transfered to my i phone and even downloaded appliciation to delete duplicates in i phone though it is paid application but of no use as it has not recognised the duplicate contact numbers in phonebook but it recognise only exact duplicates kindly help me how i can delete duplicate contact numbers with diffrent names

Just go ahead and go to settings>Facebook> Contacts OFF and do the same with Gmail. THe contacts related to those acct will dissapear. Then when you sync again with Gmail be carefull BCS IT SAYS IF YOU WANT TO JUST ADD THE CONTACTS OR MERGE THEM!!!!

How to send HTML email using alert framework? Kindly help!

Hi Experts,
      I am using alert framework (alert category) to send email. In the email message I want to use HTML content along with some hyperlinks.
     How can I do this?
     kindly help!
Thanks
Gopal
Message was edited by:
        gopalkrishna baliga

Hi,
To send hyper links, you can add the links in the FollowUp Activity.
The content of the mail from the alert framework will be a text mail.
One option would be to check in your SCOT settings if it would be possible to set the Content Type as TEXT/HTML . If yes, then maybe this should be possible.
Regards
Bhavesh

How to map one element to multiple target nodes? Kindly help!

Hi Experts,
 I have a source XML:
 <Inventory>
 <MaterialNo>Z001</MaterialNo>
 <InventoryLineItem>
 <BatchNo>B001</BatchNo>
 <Quantity>100</Quantity>
 </InventoryLineItem>
 <InventoryLineItem>
 <BatchNo>B002</BatchNo>
 <Quantity>120</Quantity>
 </InventoryLineItem>
 <InventoryLineItem>
 <BatchNo>B003</BatchNo>
 <Quantity>50</Quantity>
 </InventoryLineItem>
 </Inventory>
I want the target output as: This is a RFC function module which has an internal table ITAB_STOCK as the input parameter.
 YGET_STOCK
 ITAB_STOCK
 Item
 MM - Z001
 Batch - B001
 Qty - 100
 Item
 MM - Z001
 Batch - B002
 Qty - 120
 Item
 MM - Z001
 Batch - B003
 Qty - 50
 What I am getting is:
 YGET_STOCK
 ITAB_STOCK
 Item
 MM - Z001
 Batch - B001
 Qty - 100
 Item
 Batch - B002
 Qty - 120
 Item
 Batch - B003
 Qty - 50
 The MaterialNo (MM) is not coming in all the items. What could be the problem in my graphical mapping? How to achieve the expected target uisng graphical mapping?
 Kindly help!
Thanks
Gopal

Hello,
Just do the below mapping you will get it...
Map InventoryLineItem to Item in your table.
Then MaterialNo--->CopyValue---->MM
 [0]
You will get it let me know if not.
Regards,

Kindly help how to inlcude a menubar in a existing web page....

Hi,
I am a beginner in Dreamweaver and learning.I am using Dreamweaver CS5 version.i have a created a vertical menu bar with submenus in dreamweaver.i already have a webpage which contains a menu which is not browser compatible.
For the reason , i used the dreamweaver menu bar.Is it possible to include just the menu bar in to an existing webpage which is generated at run time.
Truncate.jsp is a page which loads the whole page at run time.previously i have used XML mapping to load the menus.Kindly help on how to include the menu.jsp / menu.html created in dreamweaver.
Thanks a lot....

Jegadees_b wrote:
Hi,
I am a beginner in Dreamweaver and learning.I am using Dreamweaver CS5 version.i have a created a vertical menu bar with submenus in dreamweaver.i already have a webpage which contains a menu which is not browser compatible.
For the reason , i used the dreamweaver menu bar.Is it possible to include just the menu bar in to an existing webpage which is generated at run time.
Truncate.jsp is a page which loads the whole page at run time.previously i have used XML mapping to load the menus.Kindly help on how to include the menu.jsp / menu.html created in dreamweaver.
Thanks a lot....
Use SSI (Server Side includes)
Wherever you want the menu to appear in the pages of your website add:
<?php include ('menu.html'); ?>
<?php include ('menu.jsp'); ?>
If you you are not running a local sever then you will only see the results when you upload to your remote server providing it is set up to use php.
or if you prefer to work with html files you can use:


But you must change the page extention to .shtml for any page in which you insert the includes.

Kindly help me how to view html file in swing using jbutton

hello..im a begginer at j2se language and im working on my school project..kindly help me how to view html files by clicking button at javax.swing..thanks

Here you go:public class HTMLViewer implements Runnable, ActionListener
     public void run() {
          JFrame frame = new JFrame("View HTML");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JButton button = new JButton("Click me!");
          button.addActionListener(this);
          Container cp = frame.getContentPane();
          cp.add(button, BorderLayout.CENTER);
          frame.pack();
          frame.setLocationRelativeTo(null);
          frame.setVisible(true);
     public void actionPerformed(ActionEvent e) {
          if (Desktop.isDesktopSupported()) {
               Desktop d = Desktop.getDesktop();
               try {
                    d.browse(new URI("www.google.com"));
               } catch (IOException ex) {
                    ex.printStackTrace();
               } catch (URISyntaxException ex) {
                    ex.printStackTrace();
     public static void main(String[] args) {
          EventQueue.invokeLater(new HTMLViewer());
}If that's not what you're looking for you need to ask more specific questions.

How to filter data in message mapping?Kindly help! URGENT

Hi Experts,
I have a source XML as shown below:
<Inventory>
<InventoryItem>
<InventoryQty>
<MaterialNo>X001</MaterialNo>
<ItemCode>InTransit</ItemCode>
<Quantity>1000</Quantity>
</InventoryQty>
<InventoryQty>
<ItemCode>Available</ItemCode>
<Quantity>1500</Quantity>
</InventoryQty>
<InventoryQty>
<ItemCode>UnRestricted</ItemCode>
<Quantity>1250</Quantity>
</InventoryQty>
</InventoryItem>
<InventoryItem>
<InventoryQty>
<MaterialNo>X002</MaterialNo>
<ItemCode>InTransit</ItemCode>
<Quantity>1500</Quantity>
</InventoryQty>
<InventoryQty>
<ItemCode>Available</ItemCode>
<Quantity>1600</Quantity>
</InventoryQty>
<InventoryQty>
<ItemCode>UnRestricted</ItemCode>
<Quantity>1200</Quantity>
</InventoryQty>
</InventoryItem>
</Inventory>
My Target XML is mapped to a RFC Fnction module (YGET_STOCK). The target function module has a internal table (ITAB_STOCK) as input:
YGET_STOCK
ITAB_STOCK
item
 - <Material>X001</Material>
 - <AvailableStock>1500</AvailableStock>
 - <IntransitStock>1000</IntransitStock>
item
 - <Material>X002</Material>
 - <AvailableStock>1600</AvailableStock>
 - <IntransitStock>1500</IntransitStock>
</Inventory>
So how to get the desired target XML using graphical XI mapping?
I have tried using graphical mapping and I am getting the following:
YGET_STOCK
ITAB_STOCK
item
 - <Material>X001</Material>
 - <IntransitStock>1000</IntransitStock>
 - <AvailableStock></AvailableStock>
item
 - <Material>X001</Material>
 - <IntransitStock></IntransitStock>
 - <AvailableStock>1500</AvailableStock>
</Inventory>
As shown it is reading only the first <InventoryItem> and splitting the Available and InTransit quantity into two separate items of the internal tables instead of putting them into one item.
Kindly help me! URGENT!
Thanks
Gopal
Message was edited by:
 gopalkrishna baliga
Message was edited by:
 gopalkrishna baliga
Message was edited by:
 gopalkrishna baliga
Message was edited by:
 gopalkrishna baliga
Message was edited by:
 gopalkrishna baliga

what is ur mapping def...did u map <InventoryItem> to -
item in rfc?

How to change the order of target message? kindly help

Hi Experts,
I have a source message with fields EmpNo, EmpName, Dept and joining date. The target message has the same structure but fields are in different order. That is, EmpName, Dept, EmpNo and joiningdate.
How to achive the target message with message mapping and without using a different message type for target?
Kindly help
Thanks
Gopal

Hi Gopal,
Try this one.
1. Create Only one message type of target type.
2. Go to XSD tab and export the "XSD" of the message type.
3. Change the <xsd:sequence> element to <xsd:all>
4. Then import the "xsd" in external definitions.
5. Use the imported "xsd" and create Message mapping. Give both source and target the same message type from XSD.
6. just Map one to one.
Now you can get ur required target structure. Since it is <xsd:all> it will accept ur input file.
Regards,
P.Venkat

How to monitor RFC to JDBC scenario?

How to monitor RFC to JDBC scenario
Hello,
I have update_insert scenario from RFC to Oracle database.
In TOC SXMB_MONI I have black and white flag.
In RWB I found for this scenario only successful status.
But in the database I found only 2 records from the 15 that I sent.
How can I monitor this problem?
What are the steps to investigate this situation?
Have a way to see the exact statement that I sent to the database?
Regards
Elad

Hi Elad,
If nothing can be seen in the Adapter monitor...go to the Database.
Oracle has various developer\system tools that can allow you to get information.
For example Oracle has the TOAD tool which allows you to get the SQL trace of the treatment the XI actually send.
see if the SQL interpreted by the JDBC adapter was really what you meant.
Good luck.
Nimrod.G

The GR-based IV is tick marked & it is in grey Field,Kindly help me how to

Dear All
While creating Framework PO,The GR-based IV is tick marked & it is in grey Field,Kindly help me how to remove the tick mark.
Correction did in Vendor master.Kindly let me know whatelse i have to do.

Hi!
If u are using doc. type FO, then see the field slection for that type.
SPRO - MM- purchasing - p.o - define screen lay out at doc. level - slect FOF - details.
Here, you can change GR based invoice verification field from display to optional entry.
Regards
Gopi Chand

How-to handle SRM scenarios in Bi 7.0---any help ???

Hi,
BI 7.0 is being implemented for a client.He is trying to use SRM 5.0.Can u provide me some how-to handle SRM scenarios in BW guides or documents please.
Regards,
Joy

Hi ,
I need to retract data from BW-BPS 7.1 to SRM.I am new to BW
(4 months experience)
Can anyone send me documentation , links or steps by steps guide to explain how
to do the link please?
Is it more or less the same as with retraction into CO-Pa?Is there a standard retractor?
If there are no standard retractors, what is the solution?
This a challenging task for me and I really need to do it at work.
Thanks in advance for your help.
I'll surely assign points if one can help me.
My mail is [email protected]
Nevil

How to monitor XI scenarios? Kindly help!

Similar Messages

Maybe you are looking for