How to mount a device/filesystem at multiple mount points

Hi, my device /dev/disk1s1 is auto mounted at /Volumes/UNTITLED.
i want to mount the device again on different path like /Volumes/temp.
so that i can have same device mounted at two different place.
When i type " mount /dev/disk1s1 /Volumes/temp" in Terminal , i get the following message : /dev/disk1s1 on /Volumes/temp: Resource busy
Can anyone help me in this?

I know you can do it with linux
Searching the Darwin mailing list revealed this thread;
http://lists.apple.com/archives/darwin-development/2001/Jan/msg00605.html
Seems it's not possible, but I didn't dig deep, sorry.

Similar Messages

How to make a single image with multiple clickable points?

Hi,
I just started using CS4 yesterday, but am pretty confused. I managed my first little achievement with it, but am havign troubles. I'm not even sure of the capabilities of the software to be honest, but I would like to know if I can have a single image, then have sections of it which can be hovered over with a tag and a link to another part of my site. Is this something that can be done?
Thanks!

Hi,
to reach several different links on the image you need to create so-called hotspot (I had to translate the following terms from my German Dreamweaver). How to do?
Click into the image
Open properties window
Open list box orientation.
Surround the image parts in question (look at the green arrow). Feel free/play with chosen forms.
Hans-G.
P.S.
You shouldn't use only images on your site.

[Solved] How to mount multi-device btrfs filesystem under systemd?

I am running full, native systemd. It always has an error during boot trying to mount my new, multi-device btrfs filesystem. There was no problem with mounting the filesystem when it resided on a single disk drive.
When it fails, it allows me to enter my root password and have a console. In this console, I can successfully mount the btrfs filesystem. Then boot continues normally, and then I can use the filesystem with no further problems, until the next reboot.
btrfs filesystem show /dev/sda4
failed to read /dev/sr0
Label: 'TimBTRFS' uuid: 317460bc-5b6a-4dac-acb8-7139dcbcff8b
Total devices 2 FS bytes used 31.67GB
devid 2 size 100.00GB used 2.00GB path /dev/sdb1
devid 1 size 100.00GB used 42.02GB path /dev/sda4
Btrfs Btrfs v0.19
I looked up btrfs in the wiki, and it says I have to run "btrfs device scan" before I can mount the filesystem. "This is the purpose of the btrfs mkinitcpio hook or the USEBTRFS variable in /etc/rc.conf" I do not have an rc.conf. I do not know how to do this with systemd. What do I need to do to resolve this?
Tim
Last edited by ratcheer (2012-09-06 12:12:24)

I added the btrfs hook as per the previous post. I ran "mkinitcpio -p linux". I ran grub-mkconfig. I rebooted and got the exact same problem. I did see the message early in the boot output that the btrfs hook was executed.
Here are the error messages:
[ 203.780864] device label TimBTRFS devid 1 transid 140 /dev/sda4
[ 203.781779] btrfs: disk space caching is enabled
[ 203.790133] btrfs: failed to read chunk tree on sda4
[ 203.790973] btrfs: open_ctree failed
Again, in the root console, I simply mounted the filesystem ("mount -t btrfs /dev/sda4 /btrfs"), typed Ctrl-d, and the bootup continued normally and successfully.
I need help, please.
Tim

How do I manage apple id on multiple devices

How do I manage Apple ID on multiple devices. I changed on my iMac but can't change on my iPhone or iPad.

in addition, if you want to change the iCloud (which you probably do), do
settings->iCloud->Delete Account
Then log in with yours. Be sure to note the settings first, because it will forget them.

How can a calender be synced with multiple apple devices

how can a calender be synced with multiple apple devices so that all the users can be able to access the calender and also the entries done by one of them?

Hi Muneshdm,
Welcome to Apple Support Communities.
See these articles for information on setting up iCloud on multiple iOS devices, as well as how to share calendars:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
iCloud: Share a calendar with others
http://support.apple.com/kb/ph2690
Best,
Jeremy

How I can test an application on multiple devices?

How I can test an application on multiple devices?
Any information about it?
Once I have created the .ipa file that I have to do?

In creating the IPA you would have used a provisioning profile. If that is a development one, or a distribution ad hoc one, you will have chosen what devices the IPA is allowed to work on.
So, make a distribution ad hoc profile that includes all of the devices on your iPhone developer account, and make the IPA using that profile. Now when you have made the IPA you can give it to the people who own those devices.
If they are all your own devices (or people who you see each day) you could connect each one to your Mac, and use Xcode's Organizer or Devices window (depending on which version of Xcode you use) and drag the IPA into the Applications list for the device.
If the devices are owned by other people you don't get to see, you can either send the IPA to them and they would use iTunes to get it onto their device, or if you can post the IPA online you can send a link to them, and they can install the IPA directly from the web page.
The web server will have to be HTTPS, you can't use HTTP services since iOS 7.1 came out. To post the IPA online you can use this utility:
Mac App Store - BetaBuilder for iOS Apps

How can i organize my contacts on multiple devices

how can i organize my contacts on multiple devices

What I ment was: How can I organize my contacts into groups without leaving the "Contacts" app.

How to mount usb device?

$rmformat :
Volmgt Node: /vol/dev/aliases/rmdisk0
        Logical Node: /dev/rdsk/c2t0d0p0
        Physical Node: /pci@0,0/pci1462,7210@1d,7/storage@5/disk@0,0
        Connected Device:          USB FLASH DRIVE 34CH
        Device Type: Removablemounting:
mkdir /mnt/usb
mount -F pcfs /dev/rdsk/c2t0d0p0 /mnt/usbget
mount: Block device requiredand try this
volrmmount -i rmdisk0maybe it must be here /rmdisk?
but
# ls -l /rmdisk/
total 0how to mount flesh device in Solaris 10???
Message was edited by:
[email protected]
null

i found the problem
this is output of dmesg
Jun 7 09:45:00 unknown pcfs: [ID 403951 kern.info] NOTICE: pcfs: FAT size error
Jun 7 09:45:00 unknown pcfs: [ID 132729 kern.info] NOTICE: pcfs: illegal disk formatand i do this
# mkfs -F pcfs /dev/rdsk/c2t0d0p0:cthen my device mount automaticaly

How do you mount a device like normal unix?

Hi,
I'm trying to secure some files by encrypting a disk image (DMG file). I'm doing everything through the terminal so that I can script it.
For the first step I want to mount the disk image file. But, I'm struggling to find a way to mount the disk image so that it becomes a normal part of the file system. Under Linux I would do something like this:
$ mount -t ext3 /dev/hda1 /home/steve/projects/privatemount
Under Mac OS X, I can't get it to work. I found a hdiutil command but there are all sorts of issues between it and the Finder. The closest I've got is this:
$ hdiutil attach -verbose -nobrowse -mountpoint /Users/steve/Projects/privmount /Users/steve/Projects/private-encrypted.sparseimage
Which mounts it as a directory from terminal (great), and doesn't show it up in the Finder as a removable device (great). But, the problem is that you can unmount it (hdiutil detach) while you're accessing the directory i.e editing a file. This is no good because I could lose files (seems like a bug to me). If I edit the file from vim from the command line then lsof shows the file being used. But if you access the file through the Finder i.e edit it with textmate, then lsof doesn't see the file access!
Does anyone know what the magic incantation is to mount a device from the terminal as you would a normal UNIX, have the Finder not show it as a removable device, and ensure that you can't unmount it while a user is accessing the contents?
Thanks,
Steve

Hi Bill,
Yeah that works but it shows it as a removable disk (as your second post pointed out). I'm hoping there's a solution where it won't show up as a removable disk. It's just annoying not being able to stitch together a seamless file system from a bunch of disk images!
Thanks,
Steve

How do I mount an airport drive for multiple logged in users

I have a large shared drive for itunes storage. I have 4 users and if I mount the drive for one user, if another user logs in it gets -1 appended. Is it possible to mount the drive for a single mount point for all users?

Hi,
Old thread I know, but I'm having a very similar problem. Did you find a solution?
For anyone else that could possibly help:
I have a network attached storage with a shared drive on it (call it 'shared'). I have an iMac (Mavericks) with two user logins (call them 'me' and 'her'). I have the drive auto mounting on first login for each user with a basic script:
tell application "Finder"
mount volume "smb://me:[email protected]/shared"
end tell
All good so far. The problem is whoever logs in first after a reboot gets the drive named "shared" whoever logs in second gets "shared-1". Doesn't seem like a problem except programs reference the drive, so whoever has "shared-1" gets an ! next to every song in the shared iTunes library.
Does anyone know of a way to get two users on the same machine to mount the same drive (with different credentials) and not have OSX append the "-1"?
Cheers.

[solved] Permissions issue - can't mount usb device as user, just root

In my last post I learned how to mount a secondary HDD from the command line. Problem is I did it as root. Now I have xfce4 running and I need mount permissions as user.
Here's my fstab:
[dennis@archlinux media]$ cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sdb /media/disk0 ext4 rw,user,noauto 0 0
/dev/sdb1 /media/disk1 ext4 rw,user,noauto 0 0
/dev/sdb3 /media/disk3 ext4 rw.user,noauto 0 0
UUID=1f813152-615e-41a1-b3e7-ce2b5b6836a5 / ext4 defaults 0 1
UUID=aba18f0f-5f37-4ab0-8241-5a271dc3dddb swap swap defaults 0 0
UUID=c4332450-df9e-4571-8256-8e1b10b4d162 /home ext4 defaults 0 1
UUID=f0a6eca0-9668-454b-b444-371566663510 /boot ext2 defaults 0 1
[dennis@archlinux media]$
....and these are the system messages I got when I plugged the device:
Unable to mount "74G Volume":
mount: only root can mount /dev/sdb3 on /media/disk3
Unable to mount "4G Volume":
mount: must be superuser to use mount
What do I do here?
Last edited by dennola4 (2010-06-28 00:56:51)

Karol:
# Cmnd alias specification
# Defaults specification
# Runas alias specification
# User privilege specification
root ALL=(ALL) ALL
dennis ALL=(ALL) ALL
%users ALL=(ALL) NOPASSWD: /usr/sbin/pppd
%users ALL=(ALL) NOPASSWD: /usr/sbin/hibernate
%users ALL=(ALL) NOPASSWD: /usr/sbin/standby
# Uncomment to allow people in group wheel to run all commands
%wheel ALL=(ALL) ALL
# Same thing without a password
%wheel ALL=(ALL) NOPASSWD: ALL
# Samples
# %users ALL=/sbin/mount /cdrom,/sbin/umount /cdrom
# %users localhost=/sbin/shutdown -h now
Mr. Elendig:
Why not use automounting instead?
To install Arch packages I needed an Internet connection, which required use of a Sierra Wireless card, which required chatscripts stored on another filesystem. In my first Arch forum post ever, the one preceding this one, I learned to mount a device by creating a mountpoint in /media then invoking #mount. After installing all packages and creating a user name, I signed on with xfce4 and plugged in the usb device again. It didn't mount. So I did it manually using sudo. Since that worked I had the idea that adding the mountpoints to /etc/fstab would be useful, so I did. When that didn't work I decided to just ask for help.
So sure, I'm down for some automounting action. How do I do it?

Can't mount usb devices as a normal user

Hi.
I woud like to ask for help. I've been struggling with some "bug" that i came with Arch and usb devices (disks, pendrives). I can't mount it as a normal user using KDE default mounting software (Dolphin, for an exmample). I can mount it only in therminal by using sudo privileages. Is there a way to fix it? I read it, the same problem:
https://bbs.archlinux.org/viewtopic.php?id=180025
I tried to check everything according this topic, also with udisk2 archwiki thread but on my desktop machine i just can't mount usb devices without root password. This is how the error looks like for a Dolphin:
<Over sized Image removed. URL link preserved>
This is the error, from picture
Error when trying to use acces to "removable device 7,5GB". System showed: The requested operation has failed. Error checking authorization:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
Could somebody help me? I even installed udisk mounting tool to mont without root password, added 50-udisks.policy and it just does not work.
Help.
I can mount it wit terminal by typing
sudo mount /dev/sdXY /mnt/usb
than i'm asked for password and it is mounted. Don't know why i can't mount it without password when connecting usb devices to usb port.
moderator edit [ewaller]Removed link to over sized image.. Note, you set up a click through thumbnail correctly, but the "Thumbnail" was the same image and was too large
Last edited by ewaller (2014-09-28 16:37:41)

Some refresh. I followed this topic:
https://bbs.archlinux.org/viewtopic.php?id=180025
with the same problem. I found errors here:
firekage@arch_desktop ~]$ journalctl -r -u polkit
-- Logs begin at pią 2014-06-13 18:04:12 CEST, end at czw 2014-12-25 20:15:01 CET. --
cze 23 15:59:15 arch_desktop polkitd[306]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.24, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
cze 23 15:29:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:05 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:03 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:00 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:06 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.24 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:19:49 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 22:19:49 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 22:19:49 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Started polkitd version 0.112
-- Reboot --
cze 20 22:15:10 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 22:15:08 arch_desktop polkitd[304]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.23, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:02:59 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:56 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:55 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:54 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:53 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:00:00 arch_desktop polkitd[304]: Registered Authentication Agent for unix-session:c1 (system bus name :1.23 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:59:26 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:59:26 arch_desktop polkitd[304]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:59:26 arch_desktop polkitd[304]: Finished loading, compiling and executing 1 rules
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Started polkitd version 0.112
cze 20 21:59:26 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 21:58:39 arch_desktop systemd[1]: Stopped Authorization Manager.
cze 20 21:58:39 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 21:55:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:47:40 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:47:22 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:47:22 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:47:22 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Started polkitd version 0.112
cze 20 21:47:22 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:56:46 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:56:45 arch_desktop polkitd[310]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:51 arch_desktop polkitd[310]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:16 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 19:55:16 arch_desktop polkitd[310]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 19:55:16 arch_desktop polkitd[310]: Finished loading, compiling and executing 1 rules
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Started polkitd version 0.112
cze 20 19:55:16 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:54:38 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:54:13 arch_desktop polkitd[305]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 16:47:01 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 03:02:19 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 21:32:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:25:08 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:40 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:36 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:35 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:34 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
Could somebody help me? I even checked all rules in /etc/polkit-1/rules.d and /usr/share/polkit-1/actions on my notebook, and all files are the same with the same user permission but on notebook i can mount usb without problem, but on my desktop can't at all.

Multiple mounting of network disk not wanted

I use a MacPro with 10.5.8 and a LaCie network disk. On this machine are several users which I want to give shared access to the information on the LaCie disk.
I kept having trouble with access and found that each user mounts a different device (/Volumes/disk, /Volumes/disk-1, /Volumes/disk-2, etc.). I have had several months of discussions with LaCie help desk without any results and have given up on them.
A possible side effect of the current method of connecting is also that each user has to re-connect after each login
I have looked at the forum entries for multiple mounts and these all seem to be connected to partitioned disks, which is not the case here. And I frankly don't understand enough of these posts to use that information for this specific question.
How to set up a transparent and reliable disk connection with a single mount?
Regards,
Bob

Hey there!
Well now your post is over one year old but recently I had the same problem.
Solution was what you were thinking: Redirect the path. But where??? I searched the registry and there you have it:
Computer\HKEY_CURRENT_USER\Software\Adobe\Common 8.0\Media Cache
There's a key called FolderPath. Set that to a local drive and Premiere should start again.
btw adobe: that's really a bad bad bug or misbehaviour. if something is not working software should ask for another solution instead of just crash...

I lost all of my music on my iPhone and must have separate iTunes account. How do I see if I have multiple accounts?

i lost all of my music on my iPhone and must have separate iTunes account. How do I see if I have multiple accounts?

It may be same computer but if a new, empty, library has been created then it is not the same library your device was synced with...
For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup! For example grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time. And if your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes regardless of drive letter or path.
tt2

Mounting usb devices as non-root user ??

How can a non-root user mount a usb flash device?
As root, the device is mounted as:
mount -F pcfs /dev/dsk/c1tod0s2:c /mnt
The vfstab entry for this is as follows:
/dev/dsk/c1t0d0s2:c /dev/rdsk/c1t0d0s2 /flash pcfs 2 no -
This is running Solaris 8 on a SunBlade150

Hello.
I had the same problem.
If you do not have root rights on the computer the answer is: You cannot mount the device.
I had root access and I wrote a C program that (un-)mounted all possible device files (the "s2" devices as well as the "s2:c" devices because some flash devices come without partition table).
I chowned the file to root and set the "set effective user ID" bit in the file's permissions using chmod after logging in as root - so any user can start the program.
I think this is the most flexible variant because USB devices sometimes are assigned other device names.
Martin

How to mount a device/filesystem at multiple mount points

Similar Messages

Maybe you are looking for