How to mount a sharepoint server from the finder

Can anyone help me with how to mount a microsoft sharepoint services server from the finder. I need to do this because I want to use the collaboration features in Acrobat 8. In order to create a shared review I need to be able to open the document from the sharepoint site with the full version of acrobat and I cannot do that from the web browser. From a PC I would choose to add a network location and the wizard creates a network location in the explorer, then I can access the sharepoint site (across the internet) like another file folder on my local network. I cannot seem to figure out how to accomplish the same thing on the mac. When I put in the URL for the share point site in the connect dialog from the finder it opens a webdave dialog box asking for a domain name and I have no idea what that is and it tells me the password or user name is not correct. Any help would be appreciated

You might want to pose this question in the networking forum too.

Similar Messages

  • TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

    I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
    <Email Edited by Host>

    Hi, what is the no boot directory found about???
    Can you give details step by step of what you're trying?

  • How to remove a Sharepoint list from the Powerpoint app on iPads??

    Hello,
    I have added a Sharepoint "place" in Powerpoint app on an iPad and cannot find a way to remove it, the address of the SharePoint page/place/list has been changed so it is no longer relevant to me. Any tips?

    Hello Scott,
    I did post a question but for some reason it didn't post. What I typed was removed for some reason. So I'm trying again. I'll keep trying until it posts. I had installed a 3rd party sound editor program which added a sound device to the list with Mic and line in. It's also in the output list. All I need to do is remove the device and then AU will allow me to select line in as an input device. Right now AU is confused by the extra device and wont let me select an input device. AU is a developer app. But that's not the problem. The problem is removing the device from the list of sound devices.
    If someone knows where this device might be and how to remove it, please let me know.
    Thanks,
    Dave

  • How to hide a network resource from the Finder sidebar?

    Hi everyone,
    I'd like to hide a network drive from my Finder sidebar.
    Googling around, I only found how to hide all of them, but nothing about a specific one...
    Could anyone help me getting the proper Terminal commands?
    Thanks

    It didn't work It seems I can't drag a network device out of the sidebar... I think I need some Terminal commands, but I'm not able to write them myself.
    Thanks anyway for your reply

  • How do I remove dead shortcuts from the finder favorites menu?

    I just bought a new Macbook Pro with Lion OS to replace my old macbook running snow leopard.  To transfer my old data, I use the migration assistant and time machine backup.  For the most part everything went smoothly.  However, now when I open finder, there is a dead shortcut on the favorites menu.  On my old laptop, it linked to a folder on my bootcamp partition, but I don't have a partion on my new computer.  I am unable to move or delete the shortcut from the list.  It's cluttering up my finder sidebar and I would love to get rid of it. 
    Any suggestions?

    yamkirschenbaum wrote:
    Thanks, but I've tried that.  It works for removing other shortcuts, but not for the shortcut to the bootcamp partition.
    It worked after all ?

  • Adding multiple songs to iTunes from the Finder

    The way I usually add songs to iTunes is to select multiple songs at once from the Finder and then add them all to iTunes. Now in Lion when I have two or more items selected it only adds and opens one of them instead of copying all of them to the iTunes folder. How do I add them all from the Finder into iTunes to save me some time.
    Also the default file opener for .m4a, .mp3 etc. was changed to Audacity for no reason when I upgraded to Lion. I had to manually change it back to iTunes.

    Can you do it the other way?
    Open iTunes and on the File menu is Add to Library where you can choose which ones to import.
    Regards,
    Colin R.

  • How to Invoke tasks created in FrameMaker Publishing Server from the Windows command line

    Hi All ,
    i would like to know how can we Invoke tasks and schedules created in FrameMaker Publishing Server from the Windows command line.
    we used publishing server mainly to convert Frame maker files into PDF and that should be do progarmatically without manual intervention on Demand.
    so could you please let us know how can i invoke rthe task creted to convert FM file to PDF in FrameMaker Publishing Server from the Windows command line.
    please let me know the command to execute .
    thank you and waiting for valuable response.
    best regards
    Ramesh babu

    Please see http://blogs.adobe.com/techcomm/2011/03/adobe-framemaker-server-10-and-its-command-line-ca pability.html for the same.
    Harish Dhawan

  • How do shutdown the weblogic server from the command line prompt using web logic 8.1

    I%u2019m currently using weblogic 6.1, but I will upgrade to weblogic 8.1. In weblogic 6.1, the following statements will shutdown the weblogic instance from the command line:
    java weblogic.Admin -url t3://hostname:port -username system -password abc SHUTDOWN
    How do I shutdown the weblogic server from the command line prompt using web logic 8.1.
    Any help will be greatly appreciated.
    Maria

    Maria <[email protected]> wrote:
    How do I shutdown the weblogic server from the
    command line prompt using weblogic 8.1?Greetings Maria! Use this document, located here:
    http://edocs.bea.com/wls/docs81/admin_ref/cli.html#1131733
    Hope this helps...
    Brian J. Mitchell
    Systems Administrator, TRX
    email: [email protected]
    office: +1 404 327 7238
    mobile: +1 678 283 6530

  • I have an alias of one of my external hard drives in my trash. When I click on "show original" all my external H D 's and my Mac hard drive show up. How do I delete this icon from the trash without loosing all my files?

    I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
    Rich

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • HT202279 Choose your server from the list that appears

    I administer four Yosemites servers using OS X Server.
    Everytime I launch OS X Server I have to option to Continue, which I do not choose. But I never get a list of other Macs to Adminsiter. I always have to choose "Other Mac" and enter the URL, etc. This happens on two Macs running Yosemite and being used for administrating.
    Where is the list of other Macs? No matter how often I connect to them, they never show up and I can find nothing in the menus to add them.
    According to How to administer OS X Server remotely using Server App - Apple Support it should be there:
    The first time you open the Server app on your admin computer, do not click the Continue button in the "Welcome to Server" window. Instead, choose Connect to Server from the Manage menu.
    Choose your server from the list that appears, or click "Other Mac" and then click Continue.

    I should've noted that these are web servers in various locations. They would not show on Bonjour.
    I'd still expect Server to remember and list them, and certainly the documentation doesn't indicate it's a LAN only feature.

  • Starting the 10G server from the command line

    How do I start the 10G APP SERVER FROM THE COMMAND LINE?

    http://download-west.oracle.com/docs/cd/B10464_01/core.904/b10376/start.htm#1007557
    Documentation library for Application Server 10g. It has a section on starting/stopping

  • [SOLVED] Can't access my home server from the outside

    Hi all,
    I have installed Arch on a Raspberry Pi and am trying to set up a home server. Right now, I am running a simple HTTP server (using node.js, if that matters) on port 8080. From my LAN, I can access the server all right.
    From the outside, it seems that the traffic does actually reach the computer (I conclude this from the blinking diode indicating network traffic). However, all requests time out. Interestingly, if I kill the server while a request is pending, the timeout occurs right away.
    I have no idea what is causing this. I have checked for iptables rules, but there seem to be none. What is blocking the traffic and how can I find out?
    EDIT: Nevermind, I was testing incorrectly -- the traffic did reach the Raspberry Pi, but the return traffic did not reach my test computer because it was blocked by the router's firewall. Testing from TOR works just fine.
    Last edited by MrAllan (2013-12-24 12:01:42)

    I too am having problems accessing Directory server from Netscape Console installed on Winxp.
    If I try to open Directory server it doesn't give any error. No windows nothing.
    If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
    Config details:
    iDS4.13, iMS 5.0, running on Sol 8 box
    Netscape Console 4.2 on WinXP.
    Thanks

  • Is it possible to start a remote server from the IDE?

    I would want to know if it is possible to start a domain that makes reference to a remote server (from the IDE). On this way I could start and stop the server without loading so much the machine that I use to develop my portal applications. If it is possible how I can do it?

    There is no personal Information on a crash Report unless you put something personally identifiable in the comment field. For example, here is a crash report I had on my machine awhile back: https://crash-stats.mozilla.com/report/index/bp-1de8924f-7068-4702-a410-89c492121220.
    You can go to about:crashes in your address bar, and click on the report to view the info there to satisfy yourself that there is nothing in the report. But submitting crash reports is very useful because it gives us the ability to view what crashes are plaguing our users and what we need to fix.

  • How can I mount an SMB share in the Finder? (Leopard)

    In Tiger, I was able to mount a SMB share in the finder and it would be displayed under the "Devices" section. With Leopard, I cant get this to work. Leopard is much easier to browse network shares on my Windows machine under the "Shared" section, but I would still like to have certain folder mounted all the time, preferably on startup.

    Works perfectly for me, so let me make sure we're on the same page.
    I mount the volume manually, using Connect to Server.
    I drag the volume, now appearing in Computer and on the Desktop, to the Devices section of the Sidebar.
    I eject the volume, and it disappears from the Sidebar.
    I mount the volume again (it could be by browsing for it, through Connect to Server, or through an Automount Maker document)
    It appears, without my having to do anything, in the Sidebar.
    As far as I can tell, this is what you were aiming for. Am I missing something?

  • How can i improve sharepoint server farm scalability

    Hi,
    How can i improve sharepoint server farm scalability, like currently 1000 users can access my SharePoint.
    Now i am looking to improve my SharePoint users scalability (1000 to 2000) , How can i
    do this and how can i improve my SharePoint performance  
    Prakash

    Scale up or scale out.
    Either provide your SharePoint servers with more CPU and RAM (scaling up) or add more servers to the farm (scaling out) to allow the load to be shared between the servers.
    The exact breakdown depends on the details of your implementation.

Maybe you are looking for