How to mount back a hard drive

i installd vista in my mac.. after i del the all the vista files.. now i want to make my harddisk to gether

http://www.mymacosx.com/tricks-and-tips/macosx-delete-boot-camp-partition.html

Similar Messages

How to Mount a Portable Hard Drive in redhat linux 5.3

i have a 300 gb WD hard disk. I want to attch this portsble hard drive on my server.
I want to generate my backup tar files on this attached hard drive.
please tell me how i can do this.
my current partition is as follows:
[oracle@testing tmp]$ df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d1p2 16G 476M 14G 4% /
/dev/cciss/c0d0p6 9.5G 4.8G 4.3G 53% /usr
/dev/cciss/c0d1p5 3.9G 137M 3.6G 4% /usr/local
/dev/cciss/c0d1p3 9.7G 172M 9.1G 2% /tmp
/dev/cciss/c0d0p5 9.7G 521M 8.7G 6% /var
/dev/cciss/c0d0p2 76G 43G 30G 59% /home
/dev/cciss/c0d1p1 1.3T 1.1T 172G 87% /opt
/dev/cciss/c0d0p1 2.0G 42M 1.8G 3% /boot
tmpfs 7.9G 4.3M 7.9G 1% /dev/shm
Edited by: user13376823 on Mar 7, 2011 11:44 AM

user13376823 wrote:
i have a 300 gb WD hard disk. I want to attch this portsble hard drive on my server.
I want to generate my backup tar files on this attached hard drive.
please tell me how i can do this.
my current partition is as follows:
[oracle@testing tmp]$ df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d1p2 16G 476M 14G 4% /
/dev/cciss/c0d0p6 9.5G 4.8G 4.3G 53% /usr
/dev/cciss/c0d1p5 3.9G 137M 3.6G 4% /usr/local
/dev/cciss/c0d1p3 9.7G 172M 9.1G 2% /tmp
/dev/cciss/c0d0p5 9.7G 521M 8.7G 6% /var
/dev/cciss/c0d0p2 76G 43G 30G 59% /home
/dev/cciss/c0d1p1 1.3T 1.1T 172G 87% /opt
/dev/cciss/c0d0p1 2.0G 42M 1.8G 3% /boot
tmpfs 7.9G 4.3M 7.9G 1% /dev/shm
Edited by: user13376823 on Mar 7, 2011 11:44 AMWhile many people here have nix skills, and I see Kamran has graciously offered to help, you need to be aware that this is an Oracle Database* forum and your question has nothing to do with Oracle databases. It would be better asked in a Linux forum. There is one located in this very family of forums, at Oracle Linux

How do I mount my internal hard drive?

Can anyone tell me how to mount my internal hard drive? I have a macbook air late 2010 model. 128gb flash storage. I was having problems because it would freeze on me after sleep. I ran disk utility and repair disk. It says everything is fine. But it is unmounted. Clicking on mount didn't do it. I already backed it up before it was unmounted. I did the hardware test too. It said there were no hardware issues. I see the apple brand hd but the "macintosh Hd" is grayed out. Please help!

Try doing this:
Drive Preparation
1. Boot from your Snow Leopard Installer flash drive. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Mount an external hard drive in single user mode

Do any know how to mount an external hard drive in single user mode:
I've issue the following command:
/sbin/mount -uw /
mkdir /Volumes/ex1
/sbin/mount_hfs /dev/disk2s3 /Volumes/ex1
(I've checked my external hard drive using df -k showing the device is disk2s3)
Result:
Permission denied

Hi leung wai,
   I wouldn't mind knowing the answer myself. I think the problem with doing it in the manner you attempted is that the device tree hasn't been created yet so the mount command is certainly not going to work. I assume that the answer is to start up enough of the system to have the device tree created. Unfortunately, I don't know where in the startup process that occurs. You could try the following command after making the boot volume writable:
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
Then check to see if the /dev virtual filesystem has been created. Of course it wouldn't surprise me if that didn't also mount your disks. If not, try the following:
/sbin/SystemStarter
It should have been created after that because at that point almost the whole system has started.
Gary
~~~~
   You've been telling me to relax all the way here, and
   now you're telling me just to be myself?
         -- The Return of the Secaucus Seven

I mounted my external hard drive to a pc and now I don't have edit or write permissions on my Mac (read only). How do I get them back without erasing the drive?

Hello all, I am a photographer and have my portfolio, edited and raw images backed up on a Seagate Free Agent External Hardrive. I mounted my external hard drive to a pc recently and now I don't have edit or write permissions to it on my Mac (read only). How do I get them back without erasing the drive and loosing my valuable work?

If you re-format it you will lose all the data on it!!!!! So make sure you have backed up the drive or moved all the data on it to another external HD or the internal HD on your iMac.
Below is an Apple Advice letter that explains how to format an external HD, it's written for Aperture but you can use the instructions to formate any external HD.
http://support.apple.com/kb/HT3509

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

HT201250 how do i add external hard drive to my time machine back up

how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?

To elaborate on above. I am looking to add about 300gig of photos on an external hard drive to TC.
Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac?
Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please?

I am looking to back up my MAC, and I need to know how big of an external hard drive I need

I am looking to back up my MAC, and I need to know how big of an external hard drive I need. How do I determine this?

Well, they recommend at least 2 - 3 times the size of your hard drive if you are using Time Machine because that keeps making backups until it runs out of space (and then deletes the oldest to make room for the newest).
However, if you prefer to have a bootable clone as a backup, you need about the same size as your hard drive since it is a perfect copy of your system (unless you want to partition and keep an older clone separately).
So, check to see how large your hard drive is and go from there.

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

Laptop no longer can mount my external hard drive

After updating to Mavericks, my laptop no longer can mount my external hard drive. What on earth is going on here and how can I fix this?

The drive is spinning and I was using it the night before I updated my macbook. It is viewable in disk utility but not in finder, and attempts to mount it are thwarted. The problem is literally coincident with updating the mavericks. When I click verify it didn't appear to have any problems but I will retry when I am back at home and report the findings.
It is a Toshiba 1GB external hard drive and has adequate power. Lights are on, etc.
I have not checked on another computer as do not have one available, but that will be my next step.

How do i repair a hard drive?

I bought my ipod at best buy and paid with cash i put the receit in my wallet but i got stolen at the movie theatre the point is that i don't have a recit anymore and don't know how to replace my ipod now. it apears the apple icon with the back lights off then the icon with a ipod sad face apears telling me to go to apple.com/support.ipod and the back light turns on then everything goes off you can hear it that the driver it's working hard to start but it does not turn it on at all i went to the web site that they show i spent more then 2 days reading and doing what they say but nothing works at all. i just wants to know how do i get my ipod back to normal. i went to best buy they told me i have to came here again but since i already did all of this i could not do it again right.they said it needs a new hard drive what do i have to do to get a new one? how much do i have to pay?. i don't know how to get a new hard drive because i don't have the receip.
Ipod 80GB Windows XP

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

Recovering erased data from a back-up hard drive

Hello,
I erased a folder full of data on my back-up hard drive (Western Digital), and need to recover if it possible. I deleted it and then emptied my Trash, but have not written over it yet. How can I recover this folder? Thanks.

Try using an application such as Data Rescue or FileSalvage.
(29668)

How to mount back a hard drive

Similar Messages

Maybe you are looking for