How to move a schema from one databes to another on ASM?

Hi All
I have a schema in database A on ASM and I want to move the complete schema to database B on ASM . Both databases are on RAC and on the same server.
Please tell me the steps how to do it or if there is a script to do it.
Thank you.

With the same way on single instance, through utilities like exp/imp, expdp/impdp or insert as select through database link.
Asm can't cause interferance in this task.
Regards,
Rodrigo Mufalani

Similar Messages

How to move a schema from one database to another on ASM?

Hi All
I have a schema in database A on ASM and I want to move the complete schema to database B on ASM . Both databases are on RAC and on the same server.
Please tell me the steps how to do it or if there is a script to do it.
Thank you.

There is nothing special which you need to do for ASM instance. In this case too, you will be required to use export/import utility to do the same.
Cheers
Amit
http://askdba.org/weblog/

How to move a schema from one tablespace to another

I created a new user in a new Tablespace, Then export current user and import to new user(in new tablespace), but I found out that it was stored in previous Tablespace.
How can I move data to new tablespace?
Thanks
Soheil

I created a new user in a new Tablespace, Then export current user and import to new user(in new tablespace), but I found out that it was stored in previous Tablespace.
How can I move data to new tablespace?
Thanks
Soheil Soheil,
Did the data make the transfer to the new tablespace or was it reimported vack into the old tablespace and never made it ot the new tablespace? Are the two users identified by the same name or different names? Did you try to specify which tablespace to import into or did you just use the fromuser and touser parameters? You can try this too:
1. revoke access by the 'old' user to the 'old' tablespace (alter user <user> quota 0 on <old tablespace>
2. grant access to the 'new' user on the 'new' tablespace (alter user <user> quota unlimited on <new tablespace>)
3. point the 'new' user to the 'new' tablespace (alter user <user> default tablespace <new tablespace>.
Then do the import. Then alter the default tablespace back to USERS or whatever if necessary. (thanks to Rita Kirby for this one)

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

How to move SQL database from one location to another location i.e. from C' drive to D' drive

Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
Thanks and Regards, Rangnath Mali

Hi Rangnath,
According to your description, my understanding is that you want to move databased from C drive to D drive.
You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
There are two similar posts for your reference:
http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
Best Regards,
Wendy
Wendy Li
TechNet Community Support

OpenScript: 1. How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

How to move the scripts from one location to another location. Copy, paste or Import, export

Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

How to move database objects from one user to another user

Could someone help how to move database objects from one user to another user
Thanks in advance

Thanks a lot for the reply.
Actually I wanted to know whether there is any command to change the owner ship of the table.
For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
Thanks Billy for letting me know that it is not possible using oracle query.

How to move iMovie project from one computer to another

I have been working on an iMovie 09 project on my desktop at home.
Now I want to work on the same project on my computer at work.
How can I move the project from one computer to another? What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer. It didn't work.
Thanks for your help.

Hello James Snedeker,
After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to Save Projects to Another Hard Disk
To copy an iMovie project to another disk:
1. Quit iMovie if it is open.
2. Locate the project folder in the Finder.
3. Drag the project folder to the other disk.
Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

How to move an instance from one activity to another

Hi all,
Is it possible to move an instance from one activity to another using an external process? Is it possible to do this with PAPI and pass parameters to the instance in order to determine the instance's flow?
Regards

Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
Good Luck
Right Chord

How to move Profit centers from one hierarchy to another.

Hi All - In Standard hierarchy in our Profit center accounting, we have in KCH6N as below and doing posting to these successfully.
1. C1470 - 000001470 Profit center
2. C1472 - 000001472 Profit center
Now for some Business reason, we need to temporarily move above said profit centers in their hierarchy to another one C1410. So Users could post a journal entry and then move the profit centers back to their current location.
After we make the change, It should be
C1410 - 000001470 Profit center
C1410 - 000001472 Profit center
Can you please suggest me how to move the Profit centers from one hierarchy to another. Can you please let me know how to make this change.
Thanks

Hi Hoysala,
This is not the best practice, to change profit center hierarchy node to another node, just for the sake of JV.
If you have to allocate a cost/revenue from one cost center/profit center to another, I would advise you to use manual allocation/distribution process, as per your business reason (Profit Center Allocation/Cost Center Allocation), rather than changing hierarchy nodes.
You can use 3KE5-Execute Actual Assessment and 4KE5-Execute Actual Distribution from Profit Center 1470/1472 to the profit center under node C1410, without moving profit center from one node to another.
http://veritysolutions.com.au/2012/07/03/overhead-allocations-in-sap-new-gl/
Regards
Javed

How to move CRM_UI_FRAME component from one box to another box

Hi All,
Need help about this task.
Background:
- CRM Dev Box
- CRM QC Box
- CRM Prod Box
Problem:
- CRM_UI_FRAME component on the QC Box is not working properly. When we are going to the BSP Workbench, an error comes out that there is an unclosed tag; '>' or '/>' expected entity: "<<document>>" Offset : 0000003376 Error Severity: error.
- BSPWD_BASICS/WorkAreaHostViewSet is not loaded
- This problem never occurs on both Dev and Prod Box
Our Solution:
- To copy the whole CRM_UI_FRAME component from Dev to QC
Our Question
- Is the solution possible?
- If it is, how could we transfer/copy the whole CRM_UI_FRAME or any component from one box to another box
- Could we just attach this to a transport? Or is this a BASIS task?
- Other suggestions on how to do this?
Thanks in advance!
Regards,
Marc

Hi,
Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
You should ensure that your CIM Model and CR Content on your SLD are updated as
per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
Regards,
Aidan

How to Move a file from one Directory to another directory.

Hi All
i am having a Java standlone Application reqiurements are
1---->Connection pool To be Created.
2---->Using Thread to read Multiple Files Simulatneously.
3----->After Reading Those file I have to Move it to another folder.
Plz help me.If possible give me sample code .
I am in deep trouble for this project.

Use java.io.File.renameTo(...) (look it up in the API documentation).
Renaming a file doesn't work if you're trying to move files from one disk to another disk. In that case, you have to copy the file and delete the original.

I need step by step instructions on how to move an object from one photo to another photo - in Photoshop CC 2014.

How do you move an object in one photo to another photo in Photoshop CC 2014

In the document with the object select the object and use copy (Crtl|CMD+C) then in the other image document use paste (Crtl|CMD+V).
However its not a move its a copy the object is still in the original image. (Crtl|CMD+X) instead of (Crtl|CMD+C) would cut the object out of the first image but leave a hole there that you would need to fill with a replacement to complete a move.

How to move the dock from one display to another with multiple monitors?

Sometimes the dock will switch from one monitor to another just by clicking in the dock area of the second montor. Other times it does not.

I found out that I have to keep moving downward on my trackpad after the cursor hits the bottom of the screen. It works now.

How to move the script from one env to another

Hi
I have a database where i have two schemas.
1)Owner and 2) User . User schema contains all synonyms for the objects present in Owner schema and the application will connect to user schema only.
Now i have 2 script files 1) create tables in the owner + giving grant access for user 2 ) create synonyms for objects in the owner
I have to move the code from Dev environment to QA . For QA i dont have privileges hence have to give the script file to DBA to run it
My DBA says....give the scripts through clearcase. only 2 script files should be there and environment information should not be hardcoded. i.e
for statements in the script file like : grant access for <table_name> to USERSCHEMANAME and create synonym <table_name_alisa> for OWNERschemaNAME.table_name
how do i give the scripts to my DBA with out hardcodiing. How do you have this code movement in your project ?
Should i use any placeholder for OWNERNAME ( environment spefcific informationn) and should ask them to replace it by the corresponding env name while executing
What should i do?
Hope i am clear please let me know if iam not clear
regards
raj

how do i give the scripts to my DBA with out hardcodiing. How do you have this code movement in your project ?
Should i use any placeholder for OWNERNAME ( environment spefcific informationn) and should ask them to replace it by the> corresponding env name while executing
Use a variable for schema names or create public synonyms.
And document how the DBA should implement your changes.
Your DBA should have his own "su'ish"/ "@ conn.sql'-ish" scripts for that.
Passwords can be reset runtime temporarily, and set back after the implementation completed successfully.

How to move a schema from one databes to another on ASM?

Similar Messages

Maybe you are looking for