How to move all clips in one click&drag?

I am new to the Mac world and must be just missing how one does this.
After importing my minidv into iMovie HD 06 I find I have 140 clips from the tape.
I just want to move them all into the project and then burn a dvd (through iDVD).
How can I select them all and move them down in one drag?
Click each one and drag down one at a time (140 times) is obviously what I don't want to do.

You need to hold the mouse button down as you drag the cursor down the left edge of the clips pane window. and then move to the right while holding the button down. That should create an expandable box that encloses the clips and selects the enclosed clips. If it doesn't work, your iMovie program is not functioning correctly and you need to delete preferences and do a permissions repair.
The "select all" works fine if you in fact want to select all, but not if you want to select, say, half of your clips.
Glad you resolved the problem, however.

Similar Messages

  • How to move all clips over

    Is it possible to move all audio/video clips over to insert a new clip for example.  Right now, I'm highlighting all the clips and dragging them.
    For the above, is there a way to get more precise by using the keyboard?

    Thats weird.
    Why would anyone want that behaviour for a ripple insert edit.
    When I use it (CS4) ....it inserts the clip and ripples the  clips to the right..towards the right.  ie later in the program.
    I dont understand why it would want to change the start time of a program.
    Wondering if I have the wrong grasp of what the OP is wanting to do.
    Maybe its because I am in the Southern Hemisphere

  • How to delete all emails in one click

    I did a search but couldn't find anything. Is it possible to "select all" in the email application when you want to delete a bunch of unwanted emails? Instead of having to click edit edit and click each one individually?
    Thanks so much for your time in reading this

    Yes you can by tapping each one after you have opened your mailbox. There is a circle to the left of the message and at the bottom there is a delete box. 

  • Have multiple accounts, how can I move all products into one account?

    have multiple accounts, how can I move all products into one account?

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How can I move a clip from one movie to another

    How can I move a clip from one movie to another?

    If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
    But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

  • How to move all contacts from phone to sim card?

    Could someone advise me how to move all contacts in my Treo 500 from the phone to its SIM card, and what is the capacity of the SIM card as I have approx 700 contacts in the phone.
    Thanks,
    Stuarp77
    Post relates to: Tungsten E

    You cannot, in one pass.
    Sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to move a report from one account to another account

    Dear all ,
    How to move a reports from one account to another account.
    These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
    Puru

    Hi,
    You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
    The data should be present in a Transport and you can import to Transport to any client using SCC1.
    Contact the Basis team to know how to use SCC1.
    Regards,
    Aj

  • How to move all files from a folder for a user to a centralized folder on a core server with a GP

    Hello,
    I was curious if someone know how to move all the files of a user "local" profile on a Terminal Server to that of a centralized server where the "local" profile of like the user desktop, favorites, setting, etc are stored in the event
    the local profile on the TS become corrupt it can pull from this server...
    The problem I have is no matter what I tell users to save there files to our Y drive that is a folder that is synced
    across all 6 of our TS servers, users still store files on there desktops, so as you can imagine if one day they are on one server, then next day they could be on another and there files aren't the same.... hence the reason why I want to move all there files
    to the centralized server so when I redo the profiles from scratch on the TS server in the farm they suck files from the core server and have all of the files they are used to having.... 
    So I was curious and I've heard from some this is possible in a GP, but I'd like to move the contents of all 6 TS for
    each user or if I have to d this on  per user basis I will, just looking for a way to move the files....

    Hi Trevor,
    To move all users’ desktop to a server, we can use Folder Redirection to do this. The path for Folder Redirection is:
    [Group Policy Object Name]\User Configuration\Policies\Windows Settings\Folder Redirection
    In this situation, we can choose to redirect desktop to the root of a network file share or a folder on a network share.
    Regarding how to configure this, the following article can be referred to for more information.
    Configuring Folder Redirection
    http://technet.microsoft.com/library/cc786749.aspx
    Hope it helps.
    Best regards,
    Frank Shen

  • How to move all the standard and adhoc reports from cube to multi provider

    How to move all the standard and adhoc reports from the basic cube to multi provider?
    i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
    what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
    Thanks in advance sdn experts!

    Hi Les,
    This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
    Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
    After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
    Hope this helps...

  • Move all clips to the right of the crt in cs5

    this shortcut used to be shift-m, but that no longer seems to work on cs5.
    how do you move all clips to the right of the crt?

    It's been moved to the A key.

  • How to move multiple clips with transitions?

    Im still transitioning from FCP7 to FCP 10.1.2 and can't believe I have missed the lesson that explains how to move multiple clips with transitions.
    Up till now I have tried several work arounds including deleting all the transitions then using the (P) Position tool to move the clips from the primary track to some track above it then re adding all the transitions.  This is a function I do on a daily basis.  Am I missing something?  Please help!
    Thank you

    With some further investigation, the transitions have nothing to do with my problem.  In my case there was a tiny “Black gap slug” within the group that was preventing me from being able set it on top of another group of clips or gap someplace.  But even with the gap removed… I can move the clips on top of another group but the transitions stay behind on the primary (Magnetic)
    In the screen shot you can see what happens when I move a group out of the primary (magnetic) timeline onto a gap.  All the transitions get left behind. 
    Ive notices that Cutting and pasting will only paste the sequence some other place on the primary (magnetic) timeline for me.
    An example of why I would want to put a cropped/ resized group on top of another group is to do picture in picture effects or if I wanted to create a background behind a set of adjusted clips.

  • How to move all files but X to Y

    It doesn't really matter if it's in the terminal or if it's a applescript but I need to know how to:
    Move all files in a dictionary but a few named.

    Could you pleas explain more?
    If you do not understand the shell while loop, it is possible that using shell commands is a bit more dangerous than you might want to try.
    The explanation:
    ls -a | grep -v "X" | while read file
    do
        mv "$file" "Y/"
    done
    ls -a will list all the files in the current working directory (including the invisible files that start with a leading period.  Thinking about this, maybe you do not want to include -a.  You could cd /path/to/the/desired/directory as a way to set your current working directory as the directory you wish to move things from
    cd "/path/of/the/from/directory"
    ls | grep -v "X" | while read file
    do
        mv "$file" "Y/"
    done
    The ls command's output is piped (the vertical bar | ) into the grep command (general regular expression parser).  The -v option tells grep to throw away any lines (filenames) that match the regular expression "X".  So if the regular expression X matches all the files you do not want to move, the filenames send to the next pipe will be the files you wish to move.
    The while loop will read the filenames grep has selected and invoke the mv (move) command for each file selected by grep and move them to the destination directory Y
    The bigest risk is that you will execute this in the wrong directory and move the files that you need somewhere else.  OR WORSE, if "Y" is NOT a directory, and you DO NOT put a trailing / the mv could move easy file to the destination file, deleting the previous file for each file moved, so effectively deleting every file in the directory except the last one.
    This is why I said if you do not understand what is going on with the shell commands, you could do damage to your system.
    ls could have the /path/of/the/from/directory instead of using the cd command.  The grep command could be replaced with egrep that allows using alternate matching strings:
    ls /path/of/the/from/directory | egrep -v "abc.txt|def.jpg|xyz.mp3|etc..." | while read file
    do
        mv "$file" "/path/to/the/destination/directory/"  # notice the trailing slash for safety
    done
    Good luck.  I hope you do not destroy your system

  • OpenScript: 1.     How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

    How to move the scripts from one location to another location. Copy, paste or Import, export

    Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

  • How to move BCS data from one box to other

    Hello Expert,
    Dose any one know how to move BCS data from one box to other box ?
    Thanks & Regards,

    1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
    2)  As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
    Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

  • How to move greenscreen clips around

    Hello, I was just wondering how to move greenscreen clips around the storyboard.
    -Filmmayker

    Drag them by left-clicking the mouse in the middle of the clip and dragging left or right to where you want them.

Maybe you are looking for