How to move all images in a version set

I have found need to re-arrange some of the pictures in my Organizer (PSE 3.01, Windows). I have found that if I move an image that is the top of a version set, only that top image is moved. All the older versions remain in the old folder.
Of course one can get around this by opening the version set and moving all the pictures from there, but I was moving a bunch of images, some of them version sets. This meant that I had to treat all the version sets a bit different. Would have been nice if everything went as a package to the new destination folder.
Any suggestions?

Sorry Larry, but I also found that in PSE 3.0.1 the only thing that worked for me was to expand each version set (one at a time), select all of the photos in that version set and do the Move.
Before starting my Moves, I had done a test (with an insignficant photo version set) of moving with Windows Explorer and then doing Reconnect. My moves were to a different physical hard drive and Reconnect was not automatically finding the new location. So I decided that expanding each of the version sets was the lesser evil for moving and updating the Catalog.
>Would have been nice if everything went as a package to the new destination folder.
Definitely agree.
Does anyone have feedback on what happens in Elements 4 for doing a
b Move
to a different physical hard drive when
b Version Sets
are involved?
Barb O

Similar Messages

How to move all images from a site to a new folder and not lose links?

I have always wondered this.....tried a few things with no success..Whenever I take over a site from someone, a lot of time the previous designer did not make folders for ANYTHING including images.....so in thier main directory they have 20 html pages, 200 images and css files etc.....I can not think this way.....I want to just make a folder for images...put all the images there.....a css folder....etc. Once I do this all my links are lost and it is to much work to replace each one with the broken link finder in Dreamweaver......In some other applications like Logic Studio ( a music production application as an example ) it is very similar. Your main song file is pointing to linked audio files all over your hard drive....If you decide you want to move that drive it will search for the linked audio files and when it can not find them it asks you to specify the new folder or search manually for them.....if I had moved 200 audio files it comes in quite handy because I can just point to that new folder and im done.......finally, my question is what would you guys recommend for doing this? Moving hundreds of image files so that I can organize things...........any help would be GREATLY appreciated...I have googled but found no great technique...

I'm having the same or similar issue... I think... trying to do a little house cleaning in the file structure. For example, in our events folder I'm creating archive folders (i.e. - 2004, 2005, ect...) and when I use the Files Panel to drag and drop the past event pages into the newly created archive folder, the pages loose all their links.
Image link prior to and after moving are the same (../images/logo1.gif)
It does ask me to confirm that I want to move the file but nothing about updating the links. Is it due to the way the files are linked in the original files?
Thanks in advance for any help!!!

How to get all images from folder in c#?

I am trying to get all images from folder. But it is not executing from following:
string path=@"C:\wamp\www\fileupload\user_data";
            string[] filePaths = Directory.GetFiles(path,".jpg");
            for (int i = 0; i < filePaths.Length; i++)
                dataGridImage.Controls.Add(filePaths[i]);
Please give me the correct solution.

How to display all images from folder in picturebox in c#?
private void Form1_Load(object sender, EventArgs e)
string[] files = Directory.GetFiles(Form1.programdir + "\\card_images", "*", SearchOption.TopDirectoryOnly);
foreach (var filename in files)
Bitmap bmp = null;
try
bmp = new Bitmap(filename);
catch (Exception e)
// remove this if you don't want to see the exception message
MessageBox.Show(e.Message);
continue;
var card = new PictureBox();
card.BackgroundImage = bmp;
card.Padding = new Padding(0);
card.BackgroundImageLayout = ImageLayout.Stretch;
card.MouseDown += new MouseEventHandler(card_click);
card.Size = new Size((int)(this.ClientSize.Width / 2) - 15, images.Height);
images.Controls.Add(card);
Free .NET Barcode Generator & Scanner supporting over 40 kinds of 1D & 2D symbologies.

How to move all files from a folder for a user to a centralized folder on a core server with a GP

Hello,
I was curious if someone know how to move all the files of a user "local" profile on a Terminal Server to that of a centralized server where the "local" profile of like the user desktop, favorites, setting, etc are stored in the event
the local profile on the TS become corrupt it can pull from this server...
The problem I have is no matter what I tell users to save there files to our Y drive that is a folder that is synced
across all 6 of our TS servers, users still store files on there desktops, so as you can imagine if one day they are on one server, then next day they could be on another and there files aren't the same.... hence the reason why I want to move all there files
to the centralized server so when I redo the profiles from scratch on the TS server in the farm they suck files from the core server and have all of the files they are used to having....
So I was curious and I've heard from some this is possible in a GP, but I'd like to move the contents of all 6 TS for
each user or if I have to d this on per user basis I will, just looking for a way to move the files....

Hi Trevor,
To move all users’ desktop to a server, we can use Folder Redirection to do this. The path for Folder Redirection is:
[Group Policy Object Name]\User Configuration\Policies\Windows Settings\Folder Redirection
In this situation, we can choose to redirect desktop to the root of a network file share or a folder on a network share.
Regarding how to configure this, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

How to move multiple images in applet

Hi,how to move multiple images in applet or random images in applet .
Means moving images.gif around the applet with different starting point ,help me to create that move method ..

why don't you check the tumbling duke applet as provided free in this site? :-)

How to get all images in indesign CS5 with javascript?

Hi,everybody,
How to get all images in indesign CS5 with javascript?I want to delete them.
Anyone can give me some example codes?
Thanks,
Bridge

Hey!
This will remove all images from your InDesign document:
var myLinks = app.activeDocument.links.everyItem().parent;
for(var i = 0; i < myLinks.length; i++)
myLinks[i].remove();
Hope that helps.
tomaxxi
http://indisnip.wordpress.com/
http://inditip.wordpress.com/

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

How to move all files but X to Y

It doesn't really matter if it's in the terminal or if it's a applescript but I need to know how to:
Move all files in a dictionary but a few named.

Could you pleas explain more?
If you do not understand the shell while loop, it is possible that using shell commands is a bit more dangerous than you might want to try.
The explanation:
ls -a | grep -v "X" | while read file
do
    mv "$file" "Y/"
done
ls -a will list all the files in the current working directory (including the invisible files that start with a leading period. Thinking about this, maybe you do not want to include -a. You could cd /path/to/the/desired/directory as a way to set your current working directory as the directory you wish to move things from
cd "/path/of/the/from/directory"
ls | grep -v "X" | while read file
do
    mv "$file" "Y/"
done
The ls command's output is piped (the vertical bar | ) into the grep command (general regular expression parser). The -v option tells grep to throw away any lines (filenames) that match the regular expression "X". So if the regular expression X matches all the files you do not want to move, the filenames send to the next pipe will be the files you wish to move.
The while loop will read the filenames grep has selected and invoke the mv (move) command for each file selected by grep and move them to the destination directory Y
The bigest risk is that you will execute this in the wrong directory and move the files that you need somewhere else. OR WORSE, if "Y" is NOT a directory, and you DO NOT put a trailing / the mv could move easy file to the destination file, deleting the previous file for each file moved, so effectively deleting every file in the directory except the last one.
This is why I said if you do not understand what is going on with the shell commands, you could do damage to your system.
ls could have the /path/of/the/from/directory instead of using the cd command. The grep command could be replaced with egrep that allows using alternate matching strings:
ls /path/of/the/from/directory | egrep -v "abc.txt|def.jpg|xyz.mp3|etc..." | while read file
do
    mv "$file" "/path/to/the/destination/directory/" # notice the trailing slash for safety
done
Good luck. I hope you do not destroy your system

How to move all contacts from phone to sim card?

Could someone advise me how to move all contacts in my Treo 500 from the phone to its SIM card, and what is the capacity of the SIM card as I have approx 700 contacts in the phone.
Thanks,
Stuarp77
Post relates to: Tungsten E

You cannot, in one pass.
Sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to remove "all day" as the default setting in iCal?

How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie

Need advice on how to export ALL images including any changes (Versions)

I have well over 15000 RAW ORF Olympus images in Aperture with approximately 10000 of them in the database and the rest as references to the file on the file system.
My problem is 'many' fold...
First I am frustrated with using Aperture only because it doesn't seem to perform well anymore either because I have too many files, the database is corrupted, DB IO is slow... I don't know but its not performing as it did when I started using it and I don't know what to do to fix it... so with that said here are a few options I am pursuing and the problems I am having doing so.
I am moving to Adobe Bridge and Photoshop CS4, however with most of the files in the Aperture database I need to have them exported... however the only options are Master and or Version, which is frustrating because if I choose Master I get the original RAW file less all the changes done to any versions and if I choose the version I get customized JPEG's less the RAW master file. huh! I would like if possible some other options but I can understand if they don't exist.
1. One option would be to get all the masters (which I can do now) but only if they are in the database and not referenced.
2. Second option only would be to get all the versions if the RAW was modified and not export a version for a selected image if it does not exist.
3. Third, have some way to only selected actual modified version images and not every image in a folder or in the database.
4. Export to Photoshop .psd format with layers instead of versions?
5. Filter by files in the database and files that are referenced.
6. ... I'm open to other suggestions.
Is there a way to move all the database files back to file referenced to shrink the Database or do I need to export everything and then re-import them as references?
The export process for so many files is killing me as its taking me days and days and I have no way to cross check to ensure all the files and versions are retained when exported - I'm not sure what I have or how to rebuild them in Aperture at a later time once exported?
I am exporting the sidecar file with every image but am not sure the value or significances of this file - can this file help when moving to Photoshop/Bridge?
BTW. Another reason I wish to move from having Aperture manage my files in its database is I have now lost a few hundred unrecoverable pictures for no known reason in aperture, once after a trap as I was processing a image, I lost all of my sisters funeral shots - so so sad.
Help!!!

Something is very very very wrong - 15,000 images are nothing, unless you have them all in one project. I have 300,000+ with no issues in performance. Another indicator is days to export 15,000. Don't blame Aperture - you have a giant problem.
I am not going to address how to do what you want exactly because I do not have the time but here are some hints -
You can search for adjusted versions, and you can search for managed vs. referenced (file status). You may want to think about using relocate master with some clever subfolder options/selections to put all of you original masters and any external edited masters (PSD, etc) into a nice neat hierarchy for you to browse via bridge - Aperture is fantastic at reorganizing directory structures via relocate masters.
There is no way to export adustments+RAW that Photoshop can interpret. If you want the Aperture non-destructive adjustments you must export versions end of story.
Personally I would figure out why you are having such issues with Performance - there is a cause and it will probably give you issues no matter what you are using down the road.
RB

How to move ALL my images to a new SSD in laptop

Howdy,
I am adding a new SSD to my laptop (ran out of room) and want to move ALL my images (25,000) from my current Drive C to the new Drive D on my Alienware laptop. How do I do "adjust" LR4 so that it sees the images on the D Drive versus the C Drive? I can't find an answer and I do NOT want to make a mistake here to say the least
Thanks,
Mel

This explains how to connect to your images on a different drive
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

How to move all graphic files to another hard drive?

Sorry that I do not even understand the program well enough to use the specific terms but my wife is using Photoshop Elements 4 and has thousands of graphic files. She wants to move them all to another hard drive to free up space on C drive.
1 - How do we move all the files without confusing the organizer? My wife found a move function but still has two problems: 1- Can't figure out how to tell the program where to put the files (seems like it may have just created another copy on C drive). 2- the organizer has to reconnect to every single file that is moved - a process that takes hours.
2 - How do we change the settings so that Elements will store files on the new G drive instead of continuing to put everything on C drive? Most of her new files are camera uploads and scans.
3 - After we get the files set up on G drive, is there an easy way to identify and remove the old files on the C drive? (Judging from the amount of space that is filling up on the C drive, it seems that the program must have duplicated the files on C drive in our previous attempts to move files.)

I can help with some of this...
The simple way to move the files is using Folder View. You can then simply drag and drop images - or whole folders - to the new drive. It will take a little while to sort out the catalog, but nothing painful. No reconnecting is necessary.
Go to Edit/Preferences. There is a setting there that determines where image files are stored.

How to move original images to another datastore?

Hello,
I have all my original images on a USB external drive. I want to move these images to a new harddisk but I do not know how to update my libraries. I know how to manually set the new path for each images, but I want A3 to make it automatically as I have thousand of RAW files.
Thanks in advance.

Select target images that you want to move the masters for and use - File->Relocate Masters.
There is a bunch of stuff on my site about this. Check it out.
RB

How to get all image files from a folder to wwv_flow_files?

Hi there!
Is it possible in apex to show, in a report look-a-like, all image filenames from a folder in another machine (i enter in that machine by ip) and insert all files into wwv_flow_files?
I want to see all files, then pick one and open a image...
But it can't be by browse item... it has to show all filenames as a list...
If it is possible, how can i do it?
Thanks!
Best regards,
Luis Pires

Hi,
you can connect to the server using UTL_HTTP.
Then for each files you copy the response into a BLOB to be able to show it or to store it in a table.
A piece of code :
begin
   -- initialize the BLOB.
   dbms_lob.createtemporary(l_blob, false);
   -- path to the file
   l_url := 'http://your_server/your_file.jpg';
   -- begin retrieving the target.
   l_req := utl_http.begin_request(l_url);
   -- identify ourselves (some sites serve special pages for particular browsers)
   utl_http.set_header(l_req, 'User-Agent', 'Mozilla/4.0');
   -- start receiving the response.
   l_resp := utl_http.get_response(l_req);
   -- copy the response into the BLOB.
   begin
      loop
         utl_http.read_raw(l_resp, l_raw, 32767);
         dbms_lob.writeappend (l_blob, utl_raw.length(l_raw), l_raw);
      end loop;
      -- stop when exception end_of_body is raised
   exception
      when utl_http.end_of_body then
         utl_http.end_response(l_resp);
   end;
end;It's a minimal example, you may need authentication, check l_resp.status_code, etc...

How to move all images in a version set

Similar Messages

Maybe you are looking for