How to move ALL my images to a new SSD in laptop

Howdy,
I am adding a new SSD to my laptop (ran out of room) and want to move ALL my images (25,000) from my current Drive C to the new Drive D on my Alienware laptop. How do I do "adjust" LR4 so that it sees the images on the D Drive versus the C Drive? I can't find an answer and I do NOT want to make a mistake here to say the least
Thanks,
Mel

This explains how to connect to your images on a different drive
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Similar Messages

How to move library only (not data) to new SSD

I currently have an iMac with a 2TB drive which contains my OS, application and all data (iTunes etc). However, I am about to install a 240GB SSD as an additional drive which I intend to use for the only for the OS and applications. I would like my iTunes library files to reside on the new SSD but to leave the data(music, video etc) on the existing 2TB drive and wonder what is the best way to achieve this.
Any help much appreciated.
Regards

The details of the answer will depend upon how you intend to have to drives set up. If you're not changing drive structure in any way, try copying the iTunes folder to the SSD but do not copy the media folder. On the SSD start iTunes with the option key held own and guide it to the new location of your library files. I believe (but cannot test this) it will still know to look for the files on the other drive. If it doesn't you will have to take additional steps.
Typically the easiest thing to do is not split library and media files. It gets messy when moving between drives and if all your media is on another drive there's not really much point in having the library files on the main drive with no media. You can just leave it all on the 2TB drive, then start iTunes with the option key held down and guide it to the library location on the external drive.

How to move all my library to a new computer??

Well, I need some help, cause I just bought a new computer and I know I need to erease all the content from my old library in my iPhone to use the content of the library of this computer. So what can I do to save all my settings, media, apps and so on...

Copy the ENTIRE iTunes folder from the old computer to the new computer.

How do i move my itunes image to a new PC? Without losing my Data

How do i move my itunes image to a new PC? Without losing my Data

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

How to move all files from a folder for a user to a centralized folder on a core server with a GP

Hello,
I was curious if someone know how to move all the files of a user "local" profile on a Terminal Server to that of a centralized server where the "local" profile of like the user desktop, favorites, setting, etc are stored in the event
the local profile on the TS become corrupt it can pull from this server...
The problem I have is no matter what I tell users to save there files to our Y drive that is a folder that is synced
across all 6 of our TS servers, users still store files on there desktops, so as you can imagine if one day they are on one server, then next day they could be on another and there files aren't the same.... hence the reason why I want to move all there files
to the centralized server so when I redo the profiles from scratch on the TS server in the farm they suck files from the core server and have all of the files they are used to having....
So I was curious and I've heard from some this is possible in a GP, but I'd like to move the contents of all 6 TS for
each user or if I have to d this on per user basis I will, just looking for a way to move the files....

Hi Trevor,
To move all users’ desktop to a server, we can use Folder Redirection to do this. The path for Folder Redirection is:
[Group Policy Object Name]\User Configuration\Policies\Windows Settings\Folder Redirection
In this situation, we can choose to redirect desktop to the root of a network file share or a folder on a network share.
Regarding how to configure this, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

Can I move all my images to a different folder?

I started out my project just having the images automatically saved in the same folder as the website (using dreamweaver cs6). Now I'm realizing that I'm probably going to want all those images in an images folder inside my site project because when I move the project to my online server I don't want all the images there in the root.
Obviously, if I just move the images in windows explorer to a folder the pages I created won't be able to find them. Does DW have a way to move all the images so that it automatically changes the references with it?

Use DW's Files Panel (F8) to create a new folder. Right click on site root and select New Folder.
Then then click and drag your .jpg and .png files to that new folder. Assuming your site is properly defined, DW will prompt to update link paths for you. Click yes.
Nancy O.

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

How to delete all those images of an event "in one go" which were not used in a foto book of that event?

How to delete all those images of an event "in one go"
which were not used in a foto book of that event?

To select multiple photos in an event for deletion hold down the Command key and click on those you want to delete.
OT

How to move all files but X to Y

It doesn't really matter if it's in the terminal or if it's a applescript but I need to know how to:
Move all files in a dictionary but a few named.

Could you pleas explain more?
If you do not understand the shell while loop, it is possible that using shell commands is a bit more dangerous than you might want to try.
The explanation:
ls -a | grep -v "X" | while read file
do
    mv "$file" "Y/"
done
ls -a will list all the files in the current working directory (including the invisible files that start with a leading period. Thinking about this, maybe you do not want to include -a. You could cd /path/to/the/desired/directory as a way to set your current working directory as the directory you wish to move things from
cd "/path/of/the/from/directory"
ls | grep -v "X" | while read file
do
    mv "$file" "Y/"
done
The ls command's output is piped (the vertical bar | ) into the grep command (general regular expression parser). The -v option tells grep to throw away any lines (filenames) that match the regular expression "X". So if the regular expression X matches all the files you do not want to move, the filenames send to the next pipe will be the files you wish to move.
The while loop will read the filenames grep has selected and invoke the mv (move) command for each file selected by grep and move them to the destination directory Y
The bigest risk is that you will execute this in the wrong directory and move the files that you need somewhere else. OR WORSE, if "Y" is NOT a directory, and you DO NOT put a trailing / the mv could move easy file to the destination file, deleting the previous file for each file moved, so effectively deleting every file in the directory except the last one.
This is why I said if you do not understand what is going on with the shell commands, you could do damage to your system.
ls could have the /path/of/the/from/directory instead of using the cd command. The grep command could be replaced with egrep that allows using alternate matching strings:
ls /path/of/the/from/directory | egrep -v "abc.txt|def.jpg|xyz.mp3|etc..." | while read file
do
    mv "$file" "/path/to/the/destination/directory/" # notice the trailing slash for safety
done
Good luck. I hope you do not destroy your system

How to move all contacts from phone to sim card?

Could someone advise me how to move all contacts in my Treo 500 from the phone to its SIM card, and what is the capacity of the SIM card as I have approx 700 contacts in the phone.
Thanks,
Stuarp77
Post relates to: Tungsten E

You cannot, in one pass.
Sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In pages,how do I copy an image to a new location by click & drag?

in pages,how do I copy an image to a new location by click & drag?

To MOVE an image to a new location, Click and Drag the image.
To move a COPY of the image to a new location, leaving the original in place, pres and hold the Option key as you Click and Drag the image.
Regards,
Barry

My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

The old Apple ID (presumably your dads) owns those songs and your new Apple ID does not. However, your dad can authorize your iD to use the songs by going to Store > Authorize This Computer from your iTunes menu and entering his Apple ID and password.

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

How to move my online number to a new Skype accoun...

How to move my online number to a new Skype account?

Are you sure the Online Number(s) are still active, if so you should be able to change your caller id settings here: https://secure.skype.com/account/caller-id/settings
Note: Not knowing the country you are in, please see this as well: http://www.skype.com/intl/en/features/allfeatures/caller-identification
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

How to move my iPhoto library to a new iMAC?

how to move my iPhoto library to a new iMAC?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

How to move ALL my images to a new SSD in laptop

Similar Messages

Maybe you are looking for