How to move back & forth from main iview to nested iview vice versa

I have application that have Main iview which have 4 forms and 8 nested iviews(Each iviews have multiple forms). All the forms in main iviews and nested iviews are in layesrs. I can able to move back and forth with in the forms from the main iviews. But I can not able to go back and forth from main iview forms to nested iview forms.
For example I have a button "NextA" in form A of Main iview A and a button "BackB" and button "NextB" in Form B in nested iviewB .
and button "BackC" and button "NextC" in Form C in nested iviewC .
All the above forms are in layers. When I press button NextA I can go to FormB. But when I press button BackB I can NOT able to go back to FormA. and also If I press Button NextB I cannot able to go to FormC.
In all the above forms,I have created a Action items in buttons with same name as event names.
Points will be awarded as I need this solution as an emergency.

John,
It sounds like you already have event (action) "BackB" assigned to your BackB button on FormB. Then draw a transition from the out port of FormB to the in port of FormA and assign the event "BackB".
If the problem is that only FormB or FormA is to be shown at a time, then you may need to manage the visibility setting for the form. In that case have your event also update a boolean value in your data store (such as, "showFormA" and "showFormB"), then make the form visibility dependent on the corresponding data store value.
I hope that helps.
Margaret

Similar Messages

How to move the OS from main drive to new ssd in opticals place

Ok I just took out the dvd player that was non operational for 2 years . Replaced it with a new 250Gig SSD. Now I would like to boot my mac off this drive instead of the almost full 500 gig hdd. Can this be done ? If so how do I do this ? Get the OS(yosemite) from the main drive (hdd) to the new drive (ssd) which is suppose to be a lot faster on boot than a hdd , correct or not? Please advise if this is possible and if so how to migrate the OS to the ssd...
Thanks in advance.
Oh and forgot to ask now that i am using the Yosemite OS can I upgrade my
mid 2009-2010 MBP 13 inch
currently running
2.53Ghz C2D
8 GB 1067 MHz DDR3 ....would like to upgrade this to 16 gigs of ram (8x2) ..Is this possible?
Running Yosemite 10.10.2 on a 500gig hdd.
again any assistance is appreciated.
Rogerwilco357

You could probably use a clone utility to copy a bootable system to the new SSD,
but not sure if you shouldn't use Carbon Copy Cloner (said to be able to copy
the Recovery partition content, too?) instead of SuperDuper. The extra feature is
worth checking into, to see if either or both can do this. Also to see if you have to
pay to get the fully working version.
With the content initially installed into the original HDD, moved over (copy/clone)
into the SSD, then you can test it to see if it would work to run the computer. But
you would need to have that additional partition that allows you to boot Recovery
to use the OS X Utilities and also be able to restore a system via internet, etc.
About the RAM upgrade. The model(s) you say you have, a Mid 2009-2010, are
two different ones. The Mid-2009 cannot be upgraded to 16GB RAM, while the
Mid-2010 model can use two 8GB RAM chips for 16GB upgrade. So, if you can
correctly identify the computer you have, then the answer may be found. OR,
you could go to crucial.com site and let it load the simple item so it can tell you
what the upgrade RAM should be, and match your computer to their RAM part.
Of course, their part uses an industry standard for Mac, of high quality; another
source of quality RAM would be from OWC macsales.com.
Both of these different questions have an answer, but will require some tedium
to get the correct information, method, and hopefully a workable resolution...
Good luck & happy computing!

How to move my favorites from Firefox to IE?

Recently, my Firefox has been very uncooperative with my computer. It's not the first time this has happened, but it will be its last. Especially after Firefox crashed my computer...
I would like to find out how to move my favorites from Firefox back to Internet Explorer? Thanks in advance ^^b

Have a look at this: "Moving your iTunes Music folder" http://docs.info.apple.com/article.html?artnum=301748

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

How to move the value from a character field to numeric or packed decimal

Hi,
can anyone explain me on how to move the value from a character field to numeric or packed decimal.
Please help me on this. Thanks...
Regards,
Rose.

Hi ,
if you use keyword MOVE u may loose the decimal and thoussan separator and if u don't want to loose them just call the FM ..HRCM_STRING_AMOUNT_CONVERT.
i doubt wherther it is HRCM or HCRM just try using *
this will suit ur requirement.
Regards,
KK

How to move music library from old pc to new Mac air

How to move music library from old pc to new Mac air

Here's an Apple article:
http://support.apple.com/kb/HT4527?viewlocale=en_US

How to move itunes library from winXP to NAS drive

Can someone point me to a location that has intructions on how to offload
my Itunes library from my XP PC to my IOMEGA media center NAS drive? I've
searched quite a bit and haven't been able to find a comlete set of intructions
yet. Just trying to free up disk space on my desktop. It gets a bit confusing sometimes when they mention music files and library files. To me, they are one in the same, but I think they are not. Would be nice if there was a flow chart of
how Itunes works and what each file component does. You know, like the difference between an .itl file and a .xml file?

First of all I still don't know how to post a question. There is nothing in here that asks me to do so. Therefore I can only reply to one already asked. My problem is that I followed the instructions in iTunes which tell me how to move the files from the C Drive to another location (which happens to be my D Drive). After doing that it then tells me to drag the old files into the recycle bin, however, it won't comply and tells me that the procedure can't be performed because of copywrite protections. Where do I go from here? Or at the very least, how do I post a question in this forum the normal way?

How to move iTunes library from C-drive to D-drive

I'm a Mac guy, but my wife has a PC running XP Home & iTunes 7.1.1.5. At this point, everything works fine. I thought I'd better ask this question BEFORE I did something stupid.
I've noticed that the C-drive has most (not all) of the apps on it and is only partitioned to give 14GB, whereas the D-drive has ten times that much. The system shows me that most of the C-drive space is used (only 15% free space remaining), so I thought it'd be a good idea to move iTunes to the D-drive before she goes crazy ripping her whole CD collection. Seems silly to not use the space!
I've seen enough horror stories about people's mishaps with their iTunes Library to not take this idea lightly.
How do I keep everything on the same computer, but move the app & the Lbrary to the D-drive?? BTW, I have not yet used the "Consolidate Library" feature... is that good or bad?
Thanks in advance!
Windows XP

First of all I still don't know how to post a question. There is nothing in here that asks me to do so. Therefore I can only reply to one already asked. My problem is that I followed the instructions in iTunes which tell me how to move the files from the C Drive to another location (which happens to be my D Drive). After doing that it then tells me to drag the old files into the recycle bin, however, it won't comply and tells me that the procedure can't be performed because of copywrite protections. Where do I go from here? Or at the very least, how do I post a question in this forum the normal way?

How to move SQL database from one location to another location i.e. from C' drive to D' drive

Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
Thanks and Regards, Rangnath Mali

Hi Rangnath,
According to your description, my understanding is that you want to move databased from C drive to D drive.
You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
There are two similar posts for your reference:
http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
Best Regards,
Wendy
Wendy Li
TechNet Community Support

HT5362 How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?

How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?
Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying.
However, I still need them and it is not an option to completely turn off notifications.
Has anybody faced the same problem?

Yeah, i've been playing around a bit with Notifications, and not being able to move there location is very annoying. The default location normally means it is covering one or more tabs in Safari (or any tabbed application for that matter). Might have to try Growl again.

Ineed to know how to move my account from this computer to another without losing any of my saved material. A seven month trip necessitates a move to my laptop. Help please !!

Could someone please tell me how to move my account from a computer running XP to another computer running Vista ? I do not want to lose my saved files. Many thanks

Hello Joseph,
See this article.
iTunes: How to move your music to a new computer
B-rock

How ro move integration services from dev to test

hi
how ro move integration services from dev to test

You should be able to export/import the models/metaoutlines.
In the EIS console go to File > XML Import/Export and export the Model and Outline to XML, then import into your target environment.
Cheers
John
http://john-goodwin.blogspot.com/

How to move the objects from Infoarea to another?

Hi,
How to move the objects from Infoarea to another?
Thanx in advance,
Ravi.

Hi ..
If the drag & drop functionality is enabled you can drag the catalog and drop it in another InfoArea just as you do with files on your PC.
The other procedure is Use the right mouse button to create an InfoObject catalog in the InfoArea. If you want to make a copy of an existing InfoObject catalog, specify a reference InfoObject catalog.
and check this thread
Re: Info Object Mapping to Info Area

How to move firefox history from macbook?

Hello,
Need to know how to move firefox history from macbook to other new macbook?
Thank you

You can use Firefox Sync to sync the history.
You can also copy the places.sqlite database file from the old computer to the new computer.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
In Mac OS X v10.7 and later, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
*Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
*Open the "Go" menu and hold down the Option key to make the Library appear
*http://kb.mozillazine.org/Show_hidden_files_and_folders

How to move PDF file from Spool to Application Server?

How to move PDF file from Spool to Application Server?
Cannot use RSTXPDFT4 because that converts OTF to PDF and the file is already PDF.
RSTXPDFT5 doesn't work. It picks the file up and assigns it a 'text' type and outputs a 1 line txt (1kb in size) on the server with the spool number in it!
The program which outputs the file to the spool, in the first place, uses adobe forms and outputs to a printer of type PDF.

Hi Gemini ,
Please refer the below links.
[http://sap.ittoolbox.com/groups/technical-functional/sap-hr/convert-a-spool-to-pdf-and-save-on-application-server-in-background-720959]
[http://www.sapfans.com/forums/viewtopic.php?f=13&t=325628&start=15]
Edited by: Prasath Arivazhagan on Apr 13, 2010 4:48 PM

How to move back & forth from main iview to nested iview vice versa

Similar Messages

Maybe you are looking for