How to move back the 'Tool Palette' to the upper corner?

Hello, I accidentally performed several mouse-clickings on the 'Tool Palette' in the Layout Editor and then the mentioned palette was placed at the left-handed bottom of my screen, which is very very inconvenient. Would anyone let me know how to restore it to the original position?
P.S. I am using the Oracle Reports 2.5 bundled with Designer/2000.
Thanks for your replies!

hai
    For this issue goto t.code MSC2N give Material,Batch and Plant.
than select Basic data1 and find batch status select unrestr-use.
      i think this is help to you.
          regards
                  m.harikrishna.

Similar Messages

How to move back the stock to inventory management?

Hi,
I have done goods movement in inventory management and it has created transfer requirement in warehouse mangement. Now the stock is in storage type 921 stock transfer and it is in restricted batch mode. I want to move the stock back to inventory management. Please guide me with the transaction code details and movement type details.
Thanks for your time.
Raja

hai
    For this issue goto t.code MSC2N give Material,Batch and Plant.
than select Basic data1 and find batch status select unrestr-use.
      i think this is help to you.
          regards
                  m.harikrishna.

How to move back microsoft in the original folder

How to move back microsoft in the original folder?

Microsoft Office? The applications themselves go into Applications>Microsoft Office 2011.
Why did you move them? You may need to install anew if you've moved the applications in the suite.
Clinton

How to move back microsoft to the original folder

how to move back microsoft to the original folder

Drag the applications and files back into the MicroSoft Office folder.

How to revert back the changes that have made to Infoset

Dear Experts,
Can any one help me with solution for the below issue?
I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
Earlier solutions will be appreciated.
Thanks & Regards,
Prathish.

Hi,
If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
wish u luck.
Regards,
Rahul

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

HT1343 How to move the beginning of a (PDF) document/how to move to the end of a document?

Control-A
Move to beginning of line/paragraph
Control-E
Move to end of line/paragraph
But, how to move to the beginning or end of the document?

I have the Apple keyboard with numeric keypad. The two circled keys move at the beginning and at the end of the document.

My 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd .

my 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd.

Reconnect it to the computer to which you last synced it.
For more information see http://support.apple.com/kb/ht1212

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.

Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

Mac book pro 15" 2.3 ghz the battery cannot be charged. the upper corner right says it's plugged in but not charging.

I just brought my Mac book pro 15" 2.3 ghz on 12 september 2012 not even one week I've used it the battery cannot be charged.
the upper corner right says it's plugged in but not charging.
How do I solve this I'm going to London the next week! (23/09/2012)
I need this replaced or repaired ASAP. Is tat possible? It hasn't being used for even a week and it's already cause such a trouble? Is this what Mac is?

Hi Steve,
I just got back from the apple service centre. I must say they treat us pretty bad and raising voices and stuffs.. If you wanna question or doubt on such service, I've recoded everything in my mobile and iPad. The company I brought from is TECHNOCRATS in 1Borneo Hypermall. The service centre headquarters is DIGITAL FORTRESS SDN. BHD. located in Damai Point.
Here's what happened..
I went in the service centre and disappointingly, no one entertain us (my boyfriend and I).. we stood there for a few minutes. :(
Till we enquire for administration and problems. A girl said she doesn't know much. She gave me a number to her superior named Charles. She asked us to contact him. Then we asked "aren't you suppose to call your superior regarding to this matter?". "it's this the part of your profession to call Charles? Why is it my job to find him?"
Soon the lady calls him and she passed the phone to my partner.
Wow, there was raising voices and stuffs in the phone. So my partner asked him to come up to the office and discuss this matter since he was jst downstairs. For your information this is the second visit of the day, so we visited the second time after lunch hour which is 2:15pm
Well it was dramatic, Charles with his raising voices and terrible attitude for a greeting. So he straight forward blamed us for not putting the mbp down to the registration. (FYI no one there bothers to serve us for the 1st and 2nd visit). For my concern, this mbp is not cheap. And how can I just put down my laptop and leave? Without any rational reasons.
Long story short, I told him my problem and he said he will make a diagnosis and will return the answer to me tomorrow probably before noon.
Here's what I'm upset about. I enquire about the genius bar. He kinda felt offended and told me tat only apple store has genius bar! Im just asking you don't néed to be so loud on this.. I'm still very new to Mac products and stuffs.
Now that I have sent in my Mac book pro to diagnosis with the cables and everything. Hope to get the answers soon and hope it wasn't really bad since it was new.
Now its pretty much scarred on my side about Mac's Brand. I just wanted a reasonable solving problem and yet I get negative feedbacks from the service centre. Is this how it should end? I'm still pretty upset right now.
Any suggestions for me? Please?
Worried,
Shirley
Post using ipad2

How can I move back the rman convert file from file system to ASM?

I have no idea on pluging-in the data files which were unloaded as follows:
SQL> alter tablespace P_CDDH_DSPGD_V1_2011 read only;
SQL> alter tablespace P_IDX_CDDH_DSPGD_V1_2011 read only;
SQL> exec dbms_tts.transport_set_check('P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011',true);
SQL> select * from transport_set_violations;
UNIX> expdp tossadm@pmscdhf1 dumpfile=ttsfy1.dmp directory=trans_dir transport_tablespaces = P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011
RMAN> convert tablespace P_CDDH_DSPGD_V1_2011, P_IDX_CDDH_DSPGD_V1_2011 format = '/appl/oem/backup/temp/%I_%s_%t_extbspace.dbf';
Starting conversion at source at 03-OCT-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=116 instance=pmscdhf11 device type=DISK
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00079 name=+PMSCDHF1/p_cddh_dspgd_v1_2011_01.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:02:15
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00080 name=+PMSCDHF1/p_idx_cddh_dspgd_v1_2011_02.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:01:45
Finished conversion at source at 03-OCT-13
Starting Control File Autobackup at 03-OCT-13
piece handle=/dbms/oracle/r1110/db_01/dbs/c-3536350174-20131003-02 comment=NONE
Finished Control File Autobackup at 03-OCT-13
SQL> drop tablespace P_CDDH_DSPGD_V1_2011 including contents;
SQL> drop tablespace P_IDX_CDDH_DSPGD_V1_2011 including contents;
Afterward, how can I relocate the backup files "/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf", "/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf" back to the ASM group +PMSCDHF1 ???

The 11.1 documentation only says "Enables you to copy files between ASM disk groups on local instances to and from remote instances" and "You can also use this command to copy files from ASM disk groups to the operating system."
http://docs.oracle.com/cd/B28359_01/server.111/b31107/asm_util.htm#CHDJEIEA
The 11.2 documentation says "Copy files from a disk group to the operating system Copy files from a disk group to a disk group Copy files from the operating system to a disk group"
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asm_util003.htm#CHDJEIEA
I've never tried 11.1
Hemant K Chitale

How to revert back the loaded records using LSMW tool

Hi Experts,
I have question regarding the loading of a flat file using LSMW tool. I loaded the flat file(.txt) data into prodcution server insted of testing server . Is it possible to revert back the data which was loaded into production? Please provide me if any .............
appriciate your reply
Thanks
Kumar.

Hi,
This is the link related to your question which has mass deletion of records..Check it out
http://e-mory.blogspot.com/2008_03_01_archive.html
Award points if useful.
Rewards,
Ravee..

How to get back the emails from an old hard drive that has no more OS ?

Hello,
My computer crashed recently.
The problem came from Windows somehow. So the hard drive is fine.
since windows couldn't be repaired I just copied a disk image backup to a new hard drive.
The problem is that I lost all the emails that were recieved between the moment I did my backup and now.
I can still access the folder :
%USERPROFILE%\Application Data\Thunderbird\Profiles\XXXXXXXX.default\Mail\
How can I use the files in that folder in order to get back my emails in Thunderbird ??
thanks for your help!

Thunderbird mail is stored in MBOX files. these will be locted in the mile folder (well sub folders) along with an MSF index of their contents with the same name.
This add-on https://addons.mozilla.org/thunderbird/addon/importexporttools/ will import MBOX files. Once installed it adds an entry to the bottom of the Tools menu.

How to move back the 'Tool Palette' to the upper corner?

Similar Messages

Maybe you are looking for