How to move dev/2000 to another drive

Hello.
I would like to move dev/2000 from drive C to drive D. What's the simplist way to do that?
null

Thank you Roddy and Wyodor. Case solved - iWeb works as expected on another Mac. Sorry for not telling the version details here (iWeb '09 / 3.0.4 in OS 10.8.2) - but the link http://www.iwebformusicians.com/iWeb/mountain-lion.html was happily updated (have visited this site earlier with older OS at hand). Another link I stumbled into about using a common iWeb site on two (or more) machines was: http://www.macworld.com/article/1140154/iWeb_From_Two_Macs.html Not tested yet....
Again, thanks for helping.

Similar Messages

How to move all data to another drive?

I've just upgraded to Tiger and simultaneously installed two internal Seagate 325GB drives in mirror RAID configuration. I plan to keep the original 80GB drive for OSX and applications only, and move all documents, photos and music to RAID. But I'm not sure how to link the applications (iPhoto, iTunes, Word, Entourage etc) so they know where to find existing data and where to save new data. I can't find specific instructions anywhere. Could someone walk me through the steps?

Allan: I do appreciate your spending so much time to try to make sure I understand your real concerns about RAID as a backup. Since first questioning your explanation I have re-read most of the discussion threads on the topic, and noted that over the years, you have been passionately warning about mirrored RAID arrays for private and amateur people like me, on the perfectly reasonable grounds that we are not fully protected. I also noted that you are/were an IBM IT professional and bring that experience and viewpoint to the discussion. I suggest that explains our different perspectives. For the last five years I have been running without hard drive backup of any kind; relying on burning my most important data - photos and movies - to disk, until I could figure out the best way to use my machine's capabilities. Heeding warnings of the inevitabile end of my one internal drive, I decided to install twin drives in the available bays and configure them in a mirrored RAID to insure against main drive failure. That is my priority. In 26 years use of PCs and Macs, I have not found accidental deletion, application quits or keyboard mistakes to have been a noticeable, let alone significant problem. (I did lose a whole chapter of a book once, but that was because I forgot to enable Auto-save. Neither RAID nor backup would have protected against that!) I did also notice that in the forum discussions, nobody could report problems with their RAID setups or with recovery in the case of a failed drive. (I know, absence of evidence is not evidence of absence but at least there doesn't seem to be a great problem). So for a home user, I've concluded that the RAID setup is both the most appropriate for my needs, and the best value for money. I guess we'll have to disagree, but thank you for explaining your point of view. I do hope that our discussions has set out the pros and cons of RAIDs clearly, for the benefit of other readers.
Geoffrey
Powermac G4 Quicksilver Dual 800/ iBook G3 700 Mac OS X (10.4.9)
Powermac G4 Quicksilver Dual 800/ iBook G3 700 Mac OS X (10.4.9)

How to move a selection into another selection in elements 12

how to move a selection into another selection in elements 12

Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer

How do I move itunes content to another drive?

When I installed iTunes a while ago I accepted the defaults for file and contrent location, which is all on the C: drive. Now I need to make a bit of room on the drive, and I figured I move everything to the D: drive, which has enough free space (250 GB or so). I followed the Apple instructions (iTunes for Windows: Moving your iTunes Media folder - Apple Support), which for some reason end with iTunes10 (I am using iTunes 12 now), but that seems to not have worked. After following everything to the letter, I end up with just an empty folder ("Automatically add to iTunes"), and a 1 kb "plist" file in the new location.
I simply want to to move all the content from drive C: to Drive D:. How do I do that?

See also Make a split library portable.
tt2

How to move iTunes library from C-drive to D-drive

I'm a Mac guy, but my wife has a PC running XP Home & iTunes 7.1.1.5. At this point, everything works fine. I thought I'd better ask this question BEFORE I did something stupid.
I've noticed that the C-drive has most (not all) of the apps on it and is only partitioned to give 14GB, whereas the D-drive has ten times that much. The system shows me that most of the C-drive space is used (only 15% free space remaining), so I thought it'd be a good idea to move iTunes to the D-drive before she goes crazy ripping her whole CD collection. Seems silly to not use the space!
I've seen enough horror stories about people's mishaps with their iTunes Library to not take this idea lightly.
How do I keep everything on the same computer, but move the app & the Lbrary to the D-drive?? BTW, I have not yet used the "Consolidate Library" feature... is that good or bad?
Thanks in advance!
Windows XP

First of all I still don't know how to post a question. There is nothing in here that asks me to do so. Therefore I can only reply to one already asked. My problem is that I followed the instructions in iTunes which tell me how to move the files from the C Drive to another location (which happens to be my D Drive). After doing that it then tells me to drag the old files into the recycle bin, however, it won't comply and tells me that the procedure can't be performed because of copywrite protections. Where do I go from here? Or at the very least, how do I post a question in this forum the normal way?

How to move one screen to another screen Webdynpro ?

Hi,
How to move from one screen to another screen Webdypro ?
Best Regards,
Kishore

Hi,
for this you have to declare in and outbound plugs to your views,
bind them into the window area of your component and fire the
outbound plug in your action handler in view one, view2 will be called
automatically.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/1f/464941db42f423e10000000a155106/frameset.htm">documentation</a>
grtz
Koen

How to move a window to another, existing space that already has windows

NOT happy with the new Mission Control. Give me back spaces!
I have been using virtual desktops (VDT) for years and I often work 14 to 18 hours a day on my mac..
I can reorder my spaces in MC but that seems to be about all I can do and it really is ******* me off.
I need to be able to drag a single window from 1 space to another space where I already have another application running. This was TRIVIAL in SPACES but seems impossible in MC.
example: I have a text file of notes in vi in one VDT and in another I have a browser window open to a customer location where I need to use or add to those notes with some complexity. I want to move that notes window from the VDT that it is in (because there are other apps there) to the current VDT so that I can easily use the notes and the browser together. I do NOT want to have to make the stupid vi window in ALL spaces. How do I do this?
another example: I have a browser with multiple tabs and I want to move ONE of them to another VDT. I can pull the tab to make another window.. But I can't move just that tab to another VDT!! How can I do that?
Please please PLEASE fix this in Mountain Lion !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You have to start from the Desktop where the window is currently living to move it to another Desktop.
If you are using Safari in Full Screen, that screen is its own desktop and can't be moved to another desktop. If you are not in Full screen, go to the desktop that hosts the window and drag it to another Desktop in MC.

HT1926 How do I install itunes to another drive, other than drive C

Please help; I would like to install iTunes in my "new volume E" folder and it automatically installs in drive C. I don't see an option to change destination folder or an advanced option. ty

If your library is properly self-contained then app updates should be saved in the iTunes Media folder. See Make a split library portable for details.
The other main issue will be device backups which are stored on whichever drive is hosting your profile, normally C:
Relocate MobileSync Backup folder
You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system to link the two together and silently redirect any file operation on the old location through to the new one.
tt2

How to move FLASH_RECOVERY_ARE file to new drive?

Thanks for taking my questions!
Does anyone know how to move the e:\oracle\flash_recovery_area\* files to a new drive?
Thanks,
Kathie
THIS FAILED:
I created a new pfile.
Edited pfile changing old drive letter to new drive letter.
shutdown immediate
moved the E:oracle\flash_recovery_area\* to S:\oracle\flash_recovery_area\*
startup nomount;
create spfile from pfile;
shutdown immediate;
startup
Now I get ORA=38760 - This database instance failed to turn on flashback database;

Kathie,
Try this by mounting the database first
1) First Turn off Flashback:
SQL> alter database flashback off;
Monitor alert log for messages regadring flashback:
Then s turn the flashback on again.
SQL> alter database flashback on;
SQL> Alter database open;Regards

How to move iPhoto Library from internal drive to ext. drive?

Hello,
If someome can assist me with the procedure on how to move my iphoto library from my internal drive to external drive, so that I can keep and access all my iphoto library files primarily from the external drive. In addition I would also like to know once the process has been completed if it would be safe to delete the internal iphoto library? Any assistance would be greatly appreciated.
Thanks,
Jag

First and foremost, before you begin, make sure you're doing some sort of backup of those photos and your systems. Preferably with Time Machine to some sort of external drive (besides the one that will store the photos) or Time Capsule.
Then you can follow these steps:
1) Make sure the external drive is formatted for the Mac. You can use Disk Utility (applications-->utilities) and select the drive to find out if it's HFS Extended format.
2) Quit iPhoto, then drag the iPhoto library onto the eternal drive and let it copy.
3) Once it's done copying, hold down the Option key and click to launch iPhoto, it will ask you to select an iphoto library and you would choose the one on the external drive.
4) You're safe to delete the original iPhoto Library from there.. however I still recommend you've made extra sure to back your stuff up.

Is it good idea to move 500GB database to another drive?

Hello Experts,
I have Exchange server 2013 on Windows server 2008 R2 Standard. All the roles are installed on single server.
I have a single database in D drive and the size of database is around 500 GB, The drive is about to full.
I have another partition(E drive) with 1.8 TB storage and planning to move this database into this drive? is it good idea to move this size (500 GB) database to another drive?
Or
Should I create a new database in other drive, which has 1.8 TB storage and move mailboxes one by one.
Please let me know, what is the best practice for it.
Thanks in advance!!
Thanks, Manoj

Hi,
There is no downtime if you create new database on new drive and move mailbox to it. Moving mailbox doesn’t shrink the old database file, you need to delete the original database after you moving mailbox to new database.
Best regards,
Belinda Ma
TechNet Community Support

How to move a picture in another folder with drag & drop

I want to move a picture in another folder with drag&drop. I work´s any more. What I do wrong?

Hi all!
Thanks.
The problem was between the flatscreen and the chair...:-) I clicked always on the gray frame around and not in the image.
Now it works!

What is the right way to move a directory to another drive?

When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

Bazsl wrote:
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
That's something I just did successfully one hour ago...
I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
Do you try to move a folder with its subfolders ?

How to install the apps on another drive ?

Hi,
Did any of you could install the creative cloud apps on another drive than C:program/adobe ?
My computer has a very small C drive and I could not manage to install the creative cloud apps on another hardrive (D:)
Thanks for your help
Fabien

Fabien you can adjust the install location with in the preference option within the Creative Cloud Desktop application. Please be aware that shared components will still need to be installed on your primary drive.

IIS 8.5 - What's Best Way to Move INETPUB directory to Another Drive?

Does anyone have step by step process moving IIS 8.5 INETPUB directory to Another Drive? Running Windows Server 2012 R2.
Thanks.

Moving that folder is very straight forward. Unlike some folders relating to windows services, the standard inetpub folder is simply the default location that sites run from, it doesn't define where new sites go when you set them up.
So, simply create your new inetpub folder on the required drive, and give it the same permissions as the standard one as a baseline. When you setup new sites you're asked to enter the path that the site will be found, at which point you simply point to the
site to the relevant folder on your chosen drive.
If you already have sites configured in IIS, simply copy the data over to the new destination, configure the permissions to the same as the source folder, and then in IIS select each site on by one, on the right hand pane click on Basic Settings... and then
edit the Physical path to where the new folder is. Once you've done that the site will be using the new folder. You can then removed the old folder, though personally I'd wait until you've had chance to fully test it and ensure everything is working as it
should be (eg you haven't missed any permissions).

How to move dev/2000 to another drive

Similar Messages

Maybe you are looking for