How to move EP installation from one server to another server

Hi All,
we have a EP server installed. Now we have to move this EP instance onto a different machine. The source and target hardwareosDB would be the same.
Can some one tell me how to do it.
Is Homogeneous System Copy a solution for this. Or I have to install a new EP instance on the new server and then copy the contents from the old EP instance?
If I move the EP instance to the new server then will the portal run normally without any error or will i loose it and have to install it again?
thanks
PK

Hi,
Q1: Is Homogeneous System Copy a solution for this.
A1: Yes it is, its quick and works good now a days... (one small remark, I don't know if it still is true but System Copy with 6.40 required that the SID of the Source and Destination could not be the same, so if someone can fill me in on that?)
Q2: Or I have to install a new EP instance on the new server and then copy the contents from the old EP instance?
A2: Also a solution but, takes a bit more time and when you want a clone then you need to know exactly what was done when installing the inital system.
Cheers,
Benjamin Houttuin

Similar Messages

How to move SQL database from one location to another location i.e. from C' drive to D' drive

Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
Thanks and Regards, Rangnath Mali

Hi Rangnath,
According to your description, my understanding is that you want to move databased from C drive to D drive.
You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
There are two similar posts for your reference:
http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

OpenScript: 1. How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

How to move the scripts from one location to another location. Copy, paste or Import, export

Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

How to move database objects from one user to another user

Could someone help how to move database objects from one user to another user
Thanks in advance

Thanks a lot for the reply.
Actually I wanted to know whether there is any command to change the owner ship of the table.
For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
Thanks Billy for letting me know that it is not possible using oracle query.

How to move iMovie project from one computer to another

I have been working on an iMovie 09 project on my desktop at home.
Now I want to work on the same project on my computer at work.
How can I move the project from one computer to another? What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer. It didn't work.
Thanks for your help.

Hello James Snedeker,
After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to Save Projects to Another Hard Disk
To copy an iMovie project to another disk:
1. Quit iMovie if it is open.
2. Locate the project folder in the Finder.
3. Drag the project folder to the other disk.
Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

How to move an instance from one activity to another

Hi all,
Is it possible to move an instance from one activity to another using an external process? Is it possible to do this with PAPI and pass parameters to the instance in order to determine the instance's flow?
Regards

Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
Good Luck
Right Chord

How to move Profit centers from one hierarchy to another.

Hi All - In Standard hierarchy in our Profit center accounting, we have in KCH6N as below and doing posting to these successfully.
1. C1470 - 000001470 Profit center
2. C1472 - 000001472 Profit center
Now for some Business reason, we need to temporarily move above said profit centers in their hierarchy to another one C1410. So Users could post a journal entry and then move the profit centers back to their current location.
After we make the change, It should be
C1410 - 000001470 Profit center
C1410 - 000001472 Profit center
Can you please suggest me how to move the Profit centers from one hierarchy to another. Can you please let me know how to make this change.
Thanks

Hi Hoysala,
This is not the best practice, to change profit center hierarchy node to another node, just for the sake of JV.
If you have to allocate a cost/revenue from one cost center/profit center to another, I would advise you to use manual allocation/distribution process, as per your business reason (Profit Center Allocation/Cost Center Allocation), rather than changing hierarchy nodes.
You can use 3KE5-Execute Actual Assessment and 4KE5-Execute Actual Distribution from Profit Center 1470/1472 to the profit center under node C1410, without moving profit center from one node to another.
http://veritysolutions.com.au/2012/07/03/overhead-allocations-in-sap-new-gl/
Regards
Javed

How to move CRM_UI_FRAME component from one box to another box

Hi All,
Need help about this task.
Background:
- CRM Dev Box
- CRM QC Box
- CRM Prod Box
Problem:
- CRM_UI_FRAME component on the QC Box is not working properly. When we are going to the BSP Workbench, an error comes out that there is an unclosed tag; '>' or '/>' expected entity: "<<document>>" Offset : 0000003376 Error Severity: error.
- BSPWD_BASICS/WorkAreaHostViewSet is not loaded
- This problem never occurs on both Dev and Prod Box
Our Solution:
- To copy the whole CRM_UI_FRAME component from Dev to QC
Our Question
- Is the solution possible?
- If it is, how could we transfer/copy the whole CRM_UI_FRAME or any component from one box to another box
- Could we just attach this to a transport? Or is this a BASIS task?
- Other suggestions on how to do this?
Thanks in advance!
Regards,
Marc

Hi,
Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
You should ensure that your CIM Model and CR Content on your SLD are updated as
per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
Regards,
Aidan

How to Move a file from one Directory to another directory.

Hi All
i am having a Java standlone Application reqiurements are
1---->Connection pool To be Created.
2---->Using Thread to read Multiple Files Simulatneously.
3----->After Reading Those file I have to Move it to another folder.
Plz help me.If possible give me sample code .
I am in deep trouble for this project.

Use java.io.File.renameTo(...) (look it up in the API documentation).
Renaming a file doesn't work if you're trying to move files from one disk to another disk. In that case, you have to copy the file and delete the original.

I need step by step instructions on how to move an object from one photo to another photo - in Photoshop CC 2014.

How do you move an object in one photo to another photo in Photoshop CC 2014

In the document with the object select the object and use copy (Crtl|CMD+C) then in the other image document use paste (Crtl|CMD+V).
However its not a move its a copy the object is still in the original image. (Crtl|CMD+X) instead of (Crtl|CMD+C) would cut the object out of the first image but leave a hole there that you would need to fill with a replacement to complete a move.

How to move the dock from one display to another with multiple monitors?

Sometimes the dock will switch from one monitor to another just by clicking in the dock area of the second montor. Other times it does not.

I found out that I have to keep moving downward on my trackpad after the cursor hits the bottom of the screen. It works now.

HOW TO - move a datafile from one disk to another ?

How can we move a datafile which is part of the big tablespace to another disk.
We have added new Disk to our server - OS windows 2000 / Oracle 9i - 9.2.0.5
We want to move a datafile from D drive to F drive.
Shutdown of the database is possible.
Thanks
SS

I want to do the same thing but i have a BW database (SAP) and i want to move the datafile form one mount poitn to another due to space constraint, but i want to use BR*TOOLS utility to do this, so can anyone help me out on this on how to do this, what are the precaution need to be undertaken.
Jafar

How to move SQL database from one host to another ?

Hi,
We need to move the database of P1 7.0 from one host to other.Please advice if there are any documents I can refer for this operation.
I believe if we maintain the same host name for the new system it is just database movement and PI should not even be aware of this operation!!
Thanks & Regards
Mrutyunjay

Hi,
      We have a system R / 3 Enterprise Edition 47x200 running with Microsoft SQL Server 2005.
     Copy the BD in another machine (server), then applied script note 551915 (user_restore.sql) and finally proceeded to install the central instance of SAP (sapinst) with existing database option, but it does not appear that the error attached:
Errors during EMP database check on produccion4; reported errors:
Error by Compatibility level check: Database EMP has wrong compatibility level
Error by Dbo objects check: Database EMP contains user objects belonging to system user dbo
; correct reported errors before continuing with the installation
     hope someone can give us some help on diagnosing the issues, thaks.
Best regards,
Christian Astete.

How to move purchased music from one mac to another

Hi Everybody
How do I move my purchased music (purchased in Itunes on my Powerbook) to my Mac Mini so that I can enjoy the music on both computers?
I would very much like two answers:
1. One answer that gives me the solution of how to move only the purchased music?
2. An answer thats give me a solution to move/sync. the entity Itunes library/folder?
Thanks in advance :o)
Best
/Kudsk

1. How to copy purchases between computers
2. Moving your iTunes Music folder

How to move iphoto library from one account to another?

For one reason to another I'm making myself a new account on my mac. I'd like to move my iphoto library from the old account to the new one. I was wondering if the instructions about moving the library to a new location (http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht6d607c42.html) is just for moving the library within an account? Or does it also work for moving from old account to a new one on the same machine.
If not, any instructions for moving the library to a new account on the same machine?

If you have any problems with the library in the new account you might have to download and run BatChmod on the library to reset the ownership and permissions to the new account owner for all of the files in the library. User the settings shown in the screenshot below:
Click to view full size
For Owner use the owner name for that account. If the account uses a different Group then use it also. You can find the group name by seleting a file in your other account and typing Control+i to bring up the Info window. The ownership and group will be shown near the bottom.
OT

How to move EP installation from one server to another server

Similar Messages

Maybe you are looking for