How to move events from iMovie 10 to iMovie 9.0.2

I haven't been having any luck using iMovie 10. It keeps shutting my Mac down and rebooting it. I thought adding more RAM would help and added another 8GB, but that hasn't fixed the issue. I have now re-installed iMovie 9.0.2, but I have a project started in iMovie 10. After the last reboot, I can find my events, but my project that was nearly finished seems to be gone. So frustrating. Can anyone tell me how to move my events from iMovie 10 to iMovie 9.0.2?
Thank you.
PegM
My OS is Mavericks 10.9.2 if that makes a difference.

I'm afraid that its not possible to transfer projects form iMovie 10 to iMovie 9.
Imovie 10 should not be behaving how you describe. Are you short of disk space? (You certainly have plenty of RAM.).
If not I would consider re-installing iMovie 10.
Another alternative would be to use Final Cut Pro. You can easily transfer projects from Imovie 10 to FCP 10.1. I have done this myself. It is very similar to iMovie 10 but much more powerful and personally I have found it easier to use and more stable than iMovie 10. Although it is not cheap, you can try it out free for one month.
Geoff.

Similar Messages

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Ical keeping both events when I move events from one google calendar to another

Hi all!
I use multiple google calendars and sync them with my iPad, iPhone, and MacBook Air. I like to move events from one calendar to another (for color coding purposes), and am coming across a unique issue that I hope someone has a solution to.
When I edit an event by moving the event from one calendar to another the events show up correctly on the iPhone and iPad, but not in my iCal on MacBook Air. (Only when I make the changes on my iPhone and iPad). For example, when I switch an event originally created in my 'appointments' calendar to my 'done' calendar the event shows up appropriately on iPhone and iPad, and even in my Google calendars on the web. But, the iCal on my MacBook Air keeps both events. This only happens when I make the changes from the iPhone or iPad. If I make calendar changes on my computer, then there are no hiccups on any of the devices.
It seems like a syncing issue with iCal, and I can't figure out how to prevent the duplications in my iCal on my computer from showing up. Quite annoying because I have to go in and delete all of the duplicated events on the computer at the end of the day.
I have the Mavericks OS on my MBA and the software on my iPad and iPhone are updated to the latest software.
If you have any suggestions, please let me know! Thanks!

Petrill,
Thank you. I was trying to do that yesterday, but it was grayed out. It seemed to work alright today.
Thanks,
Sheena

How to move table from one tablespace to other tablespace?

how to move table from one tablespace to other tablespace?

887274 wrote:
how to move table from one tablespace to other tablespace?
alter table <table_name> move tablespace <new_tablespace_name>;
Rebuild the indexes; alter index <index_name> rebuild <new_tablespace_name> online;Example;:
SQL> create table ttt( ID NUMBER PRimary key);
Table created.
SQL> insert into ttt values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL> alter table ttt move tablespace users;
Table altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 UNUSABLE
SQL> alter index SYS_C0010863 rebuild tablespace users online;
Index altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL>

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to move pics from phone to sd card?

Could some one explain how to move pics from phone to sd card?

before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone.

How to move pics from camera role to photo stream?

How to move pics from camera role to photo stream?

before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone.

How to export events from iPhoto in Iphone 5 to Mac?

How to export events from iPhoto in Iphone 5 to Mac? Thanks

Is this waht you want to do?
It's built into the File Export function of iPhoto 9 (11). Select what every photos you want and use that option to put each photo in a folder with the Event title it came from as in this test of six randomly picked photos:
OT

How to move music from PC to Mac

How to move music from PC to Mac

Network
Flashdrive
DVD
External drive
Email
File transfer site
Take your pick. You have several choices. The easiest, if your computers are networked, would be to drag and drop between the computers. Otherwise copying the files to a thumb drive or DVD then taking the thumb drive or DVD to the other computer is probably easiest. Although you could just upload the files to an online file transer site then download them to the other computer.

How to move materials from one sloc to another sloc materials are more tha

Hi,
Can any one help me on this issue How to move materials from one sloc to another sloc materials are more than 1000
and from existing sloc to new sloc which is Hum managened i need help onthis issue thanks

hi
use T-code: MB1B Transfer Posting
Movement type:
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators: None

How to move value from one tlist to another tlist in same form?

how to move value from one tlist to another tlist in same form on button press?
Same like in data block wizard when we select value from 1st list it will go to 2nd list and can be move back. Please help i am new to forms .
Regards

just call the following proc in your add & add all buttons. Reverse the code for REMOVEs
this proc will move one item at a time from list_item1 to list_item2.
PROCEDURE add_an_item
IS
v_list_count    NUMBER;
v_item1_label VARCHAR2(60);
BEGIN
IF :list_item1 IS NOT NULL THEN v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
      IF v_list_count >= 1 THEN FOR i IN 1..v_list_count
      LOOP
         IF   :list_item1    = Get_List_Element_Value('list_item1', i)
         THEN
              v_item1_label := Get_List_Element_label('list_item1', i);
              Add_List_Element('list_item2',1,v_item_label,:list_item1);
           Delete_List_Element('list_item1',i);
           Exit;
         END IF;
      END LOOP;
       END IF;
   END IF;
END;
*********************************************************************************this proc will move all items from list_item1 to list_item2.
PROCEDURE add_all_items
IS
v_list_count NUMBER;
v_item_label VARCHAR2(60);
v_item_value VARCHAR2(60);
BEGIN
v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF    v_list_count = 1 AND Get_List_Element_Value('list_item1', 1) IS NULL THEN NULL;
ELSIF v_list_count >= 1 THEN
       FOR i IN 1..v_list_count
       LOOP
        v_item_value := Get_List_Element_Value('list_item1', i);
        v_item_label := Get_List_Element_label('list_item1', i);
        Add_List_Element('list_item2',i,v_item_label,v_item_value);
       END LOOP;
       clear_list('list_item1');
END IF;
END;I added [ code ] tags to make this easier to read.
Message was edited by:
Jan Carlin

Low On Space - How to Move Apps from phone to SD Card

Yes, I have a Pantech Breakout and I'm having a little problem with it, It shows under my Storage settings with Total Space stating 7.50GB, Available space 7.16GB and Internal space 42.19MB. Now when I go to my Storage settings under Application settings where All is highlighted is shows on bottom of phone Internal Storage 297MB used and 49MB free, when I select On SD Card it shows on bottom of phone 3.55MB used and 7.2GB free. My problem is this I recently downloaded an app right and after I downloaded the app I received a Message telling me this: Low on Space...Phone Storage is getting low please move applications from phone to SD card to secure enough space. Ok, I just don't know how to move applications from phone to SD card.
Thanks in advance :-)

Clear the cache. Menu > settings > Applications > manage applications > all tab > menu button > sort by size
Go through each application one by one and press the "clear cache" button.
Uninstall any application you don't need on the phone. Sorry the pre-installed applications can't be removed.
If an application has an option "move to SD card" you can press it to move the app to the SD card. Be aware that any application with a widget stored on the SD card will not be able to use the widget.
I would also check the size of your email application and if large, deleted any old emails from the trash. An easy way is to remove the email account, reboot the phone and then add the account back onto the phone.
Text messages are another storage hog. I would suggest getting a SMS backup or full text message (SMS & MMS) backup application to backup your messages. Then you can safely delete your messages and clear up some space.

How to get event from message?

Hi,All:
I write a run-time interface by CVI, I use TS_EngineRegisterUIMessageCallback to register my callback function, but when message passed to the callback function, as the type is struct IDispatch but not CAObjHandle, I don't know how to read event from message.
Can you help me to solve it? Thanks
Chang Zhang

Hello Chang-
If your question is simply how to obtain an object handle from an object of type IDispatch, have you investigated the function "CA_CreateObjHandleFromIDispatch"? I would recommend you look over the testexec.prj that is installed along with the TestStand engine (the CVI Operator Interface) and inspect how we handle our callbacks, this may help you understand how to go about emulating the behavior in your own project. To see this particular function in use it may be most helpful to look in the file 'engine.c' and inside the function UIMessageDeferredCallback here you will see the IDispatch pointer being handled and decoded for use by the TS engine.
Regards,
Elaine R.
Applications Engineering
National Instruments
http://www.ni.com/ask

How to move events from iMovie 10 to iMovie 9.0.2

Similar Messages

Maybe you are looking for