How to move GWIA 8 to new netware server

I have a server that I managed to get back up and running my GWIA 8 and a secondary MTA and POA. How do I transfer the GWIA/MTA/POA to the new Netware 6.5 server. I dont trust the current server.
While in panic mode, I tried installing it on the new server directly but it wouldn't accept the username / password during the Edirectory login age.
On the new server, I already have the Primary GW8 POA / MTA running.
Just wondering,
Ken

Hi Ken,
You could use DBCopy to copy everything across, and then update the settings on the agents.
I would strongly recommend the following: Caledonia Guide to Moving GroupWise
Good luck.
Cheers,

Similar Messages

How to move AEM to a new Management Server

In preparation for the migration to SCOM 2012, I'm replacing our 2003 servers with 2008 servers. Is there anything specific that needs to be done to enable AEM on another server otherthan disabling AEM on the old server and
enabling it on the new one? What is the process of updating the GPO? Do I need to rerun the wizard and generate a new template or can the existing GPO be modified?
Thanks,
Ron

Hi
I just found this question here, a bit late, but I think some one still might use it. Basically you can just disable and enable AEM on the new Management Server. What you have to make sure, that you modify the GPO to the new Management Server. The GPO adds
Settings for the Client what Kind of data is sent to the Management Server and to which Management Server. You could modify the GPO manually.
I assume you have the share for the AEM data not locally on the Management Server, instead you have it placed on a network file share.
Cheers,
Stefan
Blog: http://stefanroth.net

How to move iTunes Library to new computer

I am selling my imac and getting a retina mbp, but the imac will be gone before I can get the new one. So, I need to move all my music from the imac onto an external hard drive to import later. How can I go about doing this? If possible I could just copy all mp3s into a folder on the external and then import it into itunes on new computer. Can I do this? What other ways are there/are they easier? Thanks.

See Here...
iTunes: How to move your music to a new computer
Or...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > Copy iTunes Library to Hard Drive to Back Up Data

How to move files after installing new hard drive

I am considering the installation of a new 80 or 100 GB hard drive. I purchased the new iLife 06 program but I do not have enough space to install on my present 60 GB unit. I only have 3 GB available. I've read all the posts involving the possible brands, downloaded the instructions how to swap out the units. My question is how to backup and install my files and applications so I may reinstall onto the new drive. Can I just copy my hard drive volume onto my external Lacie storage unit and then drag the volume back to the new hard drive after booting off my OS disk? Any advice on how to move my apps and files? Do I need to purchase cloning software?

The easiest way is buy an external firewire enclosure and put your new drive in it. Then format your new drive. then use Carbon Copy Cloner to copy your internal drive onto your new drive. Then install your new drive and put your old one in the enclosure. You are now in business with an external backup on your old drive.

How to move FLASH_RECOVERY_ARE file to new drive?

Thanks for taking my questions!
Does anyone know how to move the e:\oracle\flash_recovery_area\* files to a new drive?
Thanks,
Kathie
THIS FAILED:
I created a new pfile.
Edited pfile changing old drive letter to new drive letter.
shutdown immediate
moved the E:oracle\flash_recovery_area\* to S:\oracle\flash_recovery_area\*
startup nomount;
create spfile from pfile;
shutdown immediate;
startup
Now I get ORA=38760 - This database instance failed to turn on flashback database;

Kathie,
Try this by mounting the database first
1) First Turn off Flashback:
SQL> alter database flashback off;
Monitor alert log for messages regadring flashback:
Then s turn the flashback on again.
SQL> alter database flashback on;
SQL> Alter database open;Regards

How to move license to a new computer

Can anyone point me to how to move my Acrobat Pro 11 license to a new computer

Hi Dave ,
Please refer to the following link to move the license.
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Regards
Sukrit Dhingra

Best way to move SCVMM VM to new host server...

Hi all,
Anyone have any suggestions on how to move the SCVMM VM itself (running SCVMM 2012 R2 on Server 2012 R2 vm) to a new host server? It is currently on a standalone hyper-v host and I'd like to move it to a clustered host with high availability.
I'd be moving it from hyper-v 2012 r2 running a gui to hyper-v 2012 r2 with no gui.

You cannot use SCVMM to move itself.
You must use the Hyper-V Management console.
And you can do a Shared Nothing Live Migration, just a migration, or an old fashioned Export and copy and Import.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Move just wikis to new Lion server (redirect one virtual host)

I have a bunch of services on my Mac Pro with Snow Leopard Server, including file sharing, VPN, subversion, wikis, several websites, a few webapps, etc. I don't want to upgrade that server right now, but I'd like to try upgrading the wikis to Lion Server and Wiki Server 3.
How could I move the wiki's to Lion Server on another machine? They are all accessed through a seperate virtual host.
We only have one public IP right now (I maybe could get a second public IP but don't want to just for this.) Everything hits my router (dd-wrt device, so quite configurable) which sends port 80 (and most other ports) to my snow leopard server.
One idea would be to have the router redirect another port (8080 or something) to the new lion server, and then put a redirect page on the original wiki address (port 80) to redirect over to 8080, which would then go to the other server. But that's not really ideal because then the users of my wiki would see it on a new port and a lot of times ports other than 80 are blocked by firewalls (not my firewall, but firewalls closer to my users.)
So does anyone have an other ideas on how to redirect the traffic of one virtual host to another internal machine behind NAT?
Separate question: any experience migrating a wiki from Wiki Server 2 to Wiki Server 3? Did it work well?
John

The best way to do this is to take the contents of /Library/Collaboration and put it in a location accessible from your newly set up Lion install. In Server.app, enable Wiki, and run:
     sudo wikiadmin migrate -r /Path/To/Library/Collaboration
After that, start the wiki and you should be good to go. You should bind your Lion server to the same Directory as the Snow Leopard server, to ensure permissions and users carry across successfully.
    A.

Move directory instance to new administration server?

I'd like to install a fresh copy of the Netscape 4.16 administration server, and then use it to manage an existing 4.16 directory instance. How can I move that 4.16 instance from the old admin server to the new one?
Thanks!

I think that tends to be tricky and error prune... I'd suggest that you
- export your existing directory to LDIF
- deinstall directory server
- install the new admin server (guess you want it on different machine)
- install the directory server on the old machine (and configure it to use the other one as configuration instance), you'd need to reconfigure the new directory server according to your needs
- Once you verified that all works, import the LDIF file.
I think that is way easier and faster.

Crystal Report 9 performance issue wehn we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
, Now we have issue with the performance, if the we call the reports from web application, it is talking long to retrieve the report at least 1 min.. , if we manually update the report data source pointing to new server and the reports are pulling in 1 second, Is there any easy solution to update all the report pointing to new server, we have 3000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks!
Ram

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Crystal Report 9 slow down when we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
Now we have issue with the performance when we call the reports from web application, it is talking long time to retrieve the simple report data(e.g. 1 min.). , if we manually update the report data source pointing to new server and the reports are pulling data very quickly.(e.g. 1 second for the same report) Is there any easy solution to bulk update all the reports datasource pointing to new server, we have 1000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks for your help!
Ram
Edited by: ram vaishnapu on Aug 8, 2008 8:09 PM
Edited by: ram vaishnapu on Aug 8, 2008 8:12 PM

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Server 2012 R2 ISO download is larger than DVD, how do I install on a new physical server?

I have downloaded Server 2012 R2 (not the trial version) and the size of the ISO is 5.2Gb. I get 'disc image file is too large' error when trying to create image on DVD. How do I install 2012 R2 on a new physical server?

Does your server have an out-of-band management console? Those can generally mount virtual media that is simply a file residing on the machine you are using to connect to the console.
Another option is to use USB -
https://technet.microsoft.com/en-us/library/dn293258.aspx
. : | : . : | : . tim

How to move Content from Quality to Production Server

Hi
We are havng EP6 SP13.
How to move the Content from one Server to another
With Regard's
Sri

Hi ,
Check out this link
http://help.sap.com/saphelp_nw04/helpdata/en/91/4931eca9ef05449bfe272289d20b37/frameset.htm
This explains how to move PCD objects by creating a transport package.
Ankur
P.S. Reward points if this helps

How to move documents into a new folder in Pages for iPad

I have several files in a folder in Pages on my, and want to move some of them into a new folder. How can I do that? Thank you.

copy two of them out into the "root" folder, make a new folder with those two, and then start moving the others in that you want to put together.
Jason

How to move multiple folders to new location?

I have many folders containing photos. There are located like this:
- photos 01
- photos 02
- photos 03
etc...
I want to move these folders under differernt folders. For instance, 2008 will contain all folders with photos from 2008. But now LR2 asks me to confirm the location of each folder! How can I have LR do a simple check into the new folder I give it to check if it contains other missing shoots?

In the Organizer you can switch to Folder Location View by clicking the Display button (near top right)
You can then expand he folder tree in the left hand pane and drag and drop.

How to move GWIA 8 to new netware server

Similar Messages

Maybe you are looking for